|
Page 19
( Displaying 10 of 233 Products )
|
|
|
SpeakerCraft Profile AIM LCR5 One
|
|
Profile AIM LCR5 One
AIM LCR speakers deliver powerful, compelling home theater sound in slim, easy-to-mount in-wall models. The front baffles tilt so you can aim the sound exactly where you want it. AIM LCR and AIM LCR3 models are available with Profile grilles as an option.
• Flangeless Appearance
• Two 5 1⁄4" Graphite Woofers with Phase Plugs
• Pivoting 1" Silk Dome Tweeter
• Pivoting ¾" Silk Dome Tweeter
|
|
Artcoustic Architect SL 2-1
|
|
The Architect Series has been designed and engineered with same high specifications as all the other Artcoustic models, leaving no space for compromise on sound quality and build, but allowing the flexibility to install in ceiling or in wall.
Architect SL has been created to deliver Artcoustic performance from an ultra-thin design, with a clean contemporary aesthetic. Timbre matched to all the other Artcoustic loudspeakers, Architect SL is the perfect solution for multi-room applications as well as Spitfire cinema systems or lounge 5.1 systems where rear channels cannot be installed on wall. Two models allow the correct loudspeaker to be used for the correct application, with the smaller Architect 2-1 SL delivering the same performance as the Target SL, and the Architect SL 4-2 SL giving options of either high output, high performance for more demanding applications, or used as a single point source stereo speaker where appropriate
|
|
SpeakerCraft Profile AIM Cinema Five
|
|
. Flangeless Appearance
. Pivoting 1" Aluminum/Magnesium Dome Tweeter
. Two 5." KevlarR Cone Woofers with Phase Plugs
. Two 6" KevlarR Impregnated Paper Cone Woofers
. Front-Mounted Treble, Mid & Bass Adjustment Switches
. Bi-Amping Feature
. Timbre-Matched to All Five Series Speakers
Sensitivity: 91dB 1W/1m
Power Handling: 200 Watts
Impedance: 8 Ohms Compatible
Frequency Response: 35Hz - 20kHz
Dimensions: (H x W x D) 301.4" x 9" x 4" (768 mm x 229 mm x 102 mm) (with Grille)
|
|
SpeakerCraft Profile AIM Cinema Three
|
|
. Flangeless Appearance
. Pivoting 1" Aluminum Dome Tweeter
. Two 5." Aluminum Cone Woofers with Phase Plugs
. Two 6" KevlarR Impregnated Paper Cone Woofers
. Front-Mounted Treble, Mid & Bass Adjustment Switches
. Bi-Amping Feature
. Timbre-Matched to All Three Series Speakers
Sensitivity: 90dB 1W/1m
Power Handling: 175 Watts
Impedance: 8 Ohms Compatible
Frequency Response: 39Hz - 20kHz
Dimensions: (H x W x D) 301.4" x 9" x 4" (768 mm x 229 mm x 102 mm) (with Grille)
|
|
SpeakerCraft Profile AIM Cinema One
|
|
. Flangeless Appearance
. Pivoting 1" Silk Dome Tweeter
. Two 5." Injection Molded Graphite Cone Woofers with Phase Plugs
. Two 6" KevlarR Impregnated Paper Cone Woofers
. Front-Mounted Bass Adjustment Switch
. Bi-Amping Feature
. Timbre-Matched to All One Series Speakers
Sensitivity: 89dB 1W/1m
Power Handling: 125 Watts
Impedance: 8 Ohms Compatible
Frequency Response: 40Hz - 20kHz
Dimensions: (H x W x D) 301.4" x 9" x 4" (768 mm x 229 mm x 102 mm) (with Grille)
|
|
SpeakerCraft Profile AIM7 MT Three
|
|
These speakers are L & R specific and only sold in pairs Flangeless Appearance
7" Aluminum Cone Woofer with Dual Voice Coil and Rubber Surround with Phase Plug
Pivoting 1" Aluminum Dome Tweeter
Front-Mounted Switches Allows for up to ±3dB of Bass and Treble Adjustment
Timbre-Matched to All Three Series Speakers
Sensitivity: 91dB 1W/1m
Power Handling: 125 Watts
Impedance: 8/6 Ohms
Frequency Response: 40Hz - 20kHz
|
|
SpeakerCraft Profile AIM LCR3 Three
|
|
SpeakerCraft Profile AIM LCR3 Three Specifications:
• Flangeless Appearance
• Pivoting Woofer Baffle
• Two 3” Aluminum Cone Woofers with Phase Plugs
• Pivoting ¾” Aluminum Dome Tweeter
• Front-Mounted 2-Position Treble Adjustment Switch
• Timbre-Matched to All Three Series Speakers
• Sensitivity: 86dB 1W/1m
• Power Handling: 60 Watts
• Impedance: 8 Ohms Compatible
• Frequency Response: 78Hz - 20kHz
• Dimensions:
|
|
SpeakerCraft AccuFit IW7 One
|
|
The finest flush-mount speakers in the world are useless if they cannot be installed due to restrictions in a specific building’s walls or ceiling. It may be a matter of sound penetrating an adjoining wall, unique code restrictions, or simply the customer’s requirements. SpeakerCraft offers the AccuFit Series to address space limitations, building codes, and living environment concerns.
The AccuFit series of shallow-depth,
|
|
SpeakerCraft AccuFit IW7 Three In-Wall Loudspeaker
|
|
SpeakerCrafts AccuFit IW7 Three. The finest flush-mount speakers in the world are useless if they cannot be installed due to restrictions in a specific building’s walls or ceiling. It may be a matter of sound penetrating an adjoining wall, unique code restrictions, or simply the customer’s requirements. SpeakerCraft offers the AccuFit Series to address space limitations, building codes, and living environment concerns.
|
|
Current Audio WS650 6.5" In-Wall Speaker
|
|
6.5” 2-WAY - MetaPlex Composite Cone
WS Series Speakers feature 3 position EQ switches, gold press terminals and weatherized, perforated aluminum grills.
Specifications:
DRIVER: 6.5” MetaPlex Composite Cone
TWEETER: 1” (25mm) Silk Dome
FREQ RESP: 42Hz - 20kHz
IMPEDENCE: 8 Ohms
POWER: 5 - 100 Watts
SPL: 90dB 1W/1m
|
|
Page 19
( Displaying 10 of 233 Products )
|
|
Search for products that may contain the words:
within
using