Authorised Linn Dealer

Authorised Linn Dealer

DS and LP12 Turntable Specialists


why shop @ stoneaudio?
  • High end, 2 channel hi-fi experts
  • UKs finest projection home cinema room
  • Multi-room specialists
  • Installation service
  • Hugely Knowledgeable staff
  • Quality brands
  • Best prices (Price Promise)
  • 30 day money back guarantee
  • Not just a website, visit the UKs best hi-fi showroom
  • FREE parking

Turntables


Basket Empty
Total 0.00
Secured by Sage Pay Secured by Globalsign SSL
More Articles...

Page 1†† ( Displaying 10 of 196 Products )
Turntables - Page 1 Turntables - Page 1 (Previous Page)
Page 1 of 20
Turntables - Page 2 (Next Page) Turntables - Page 20 (Last Page)
Pro-Ject Primary Phono USB
Pro-Ject Primary Phono USB
Primary Phono USB

If you thought that setting up a hi-fi quality turntable was complicated, the Pro-Ject Primary USB sets out to disprove that theory. It does this by effectively combining the strong points of two other award-winning turntables from the Pro-Ject range; the Elemental Phono USB and the Essential II.

Like the Elemental Phono USB, the Primary Phono USB uses an 8.6” aluminium tonearm with sapphire bearings for optimal tracking. The tonearm is pre-configured for the supplied Ortofon OM 5E pick-up cartridge, so there’s no need to set-up the tracking force or anti-skate during installation. The motor is also the same perimeter belt-drive type, with a low-vibration synchronous motor that’s controlled by a built-in regulator for improved speed stability.


Availability Retail (inc. 20% VAT)
£ 239.00
£ 239.00
£ 239.00
Quantity / Units:
Pro-Ject Primary Turntable
Pro-Ject Primary Turntable
Primary

If you thought that setting up a hi-fi quality turntable was complicated, the Pro-Ject Primary sets out to disprove that theory. It does this by effectively combining the strong points of two other award-winning turntables from the Pro-Ject range; the Elemental and the Essential II.

Like the Elemental, the Primary uses an 8.6” aluminium tonearm with sapphire bearings for optimal tracking. The tonearm is pre-configured for the supplied Ortofon OM 5E pick-up cartridge, so there’s no need to set-up the tracking force or anti-skate during installation. The motor is also the same perimeter belt-drive type, with a low-vibration synchronous motor that’s controlled by a built-in regulator for improved speed stability.


Availability Retail (inc. 20% VAT)
£ 189.00
£ 189.00
£ 189.00
Quantity / Units:
Pro-Ject Essential III A
Pro-Ject Essential III A
Essential III A

The Essential III A boasts a series of notable improvements that elevate it well beyond the ability of its predecessor, both technically and cosmetically.

The Essential III A retains the simple yet elegant frame of the Essential II. Made from high-quality MDF for its acoustically neutral character, and now wrapped in a high-gloss paint finish (available in red, white or black); the main structure combines both elegance and functionality. The plinth is then mounted on three anti-vibration feet, for effective decoupling from the surface on which the turntable is placed.


Availability Retail (inc. 20% VAT)
£ 279.00
£ 279.00
£ 279.00
Quantity / Units:
Pro-Ject Essential III
Pro-Ject Essential III
Essential III

The Essential III boasts a series of notable improvements that elevate it well beyond the ability of its predecessor, both technically and cosmetically.

The Essential III retains the simple yet elegant frame of the Essential II. Made from high-quality MDF for its acoustically neutral character, and now wrapped in a high-gloss paint finish (available in red, white or black); the main structure combines both elegance and functionality. The plinth is then mounted on three anti-vibration feet, for effective decoupling from the surface on which the turntable is placed.


Availability Retail (inc. 20% VAT)
£ 239.00
£ 239.00
£ 239.00
Quantity / Units:
SME Model 30/12
SME Model 30/12
Model 30/12 Turntable

A larger version of our well known Model 30/2, it will accept nine, ten and twelve inch arms but is especially directed at the exciting Series V-12. This offers performance 27% better than a nine inch arm in respect of angular error distortion. Its immaculate construction and finish stem from facilities and uncompromising quality control which have made the name SME a byword for engineering excellence.


£ 29,582.00 *
£ 35,394.00 *
* Only available for purchase in-store
SME Model 20/12
SME Model 20/12
Model 20/12 Turntable

A larger and more massive version of our well known Model 20/2. It will accept nine, ten and twelve-inch arms but is especially directed at the exciting Model 312S. This offers a performance some 27% better than a nine-inch arm in respect of angular error distortion. The wand and headshell are pressure die-cast in magnesium and are 27g lighter than they would be in aluminium.


£ 15,020.00 *
£ 18,060.00 *
* Only available for purchase in-store
SME Model 20/3
SME Model 20/3
Model 20/3 weighs approximately 28.6Kg (63lb), significant in relation to its size because it is density that matters. For example, the same weight of metal spread over a large enough area would be aluminium foil! The sub-chassis measures only 440mm (17 5/16”) by 350mm (13 ¾”) but weighs 11Kg (24lb). Its thickness 16mm (5/8”) resists flexing at low frequencies whilst high frequency resonance is attenuated by efficient extensional damping.


£ 8,544.00 *
£ 12,832.00 *
* Only available for purchase in-store
SME Model 15 Turntable
SME Model 15 Turntable
Model 15 Turntable

The Model 15 could be described as "the ultimate in recovery vehicles", allowing the cartridge to retrieve the last nth of recorded material whether digital or analogue, from the vinyl disc and thus approaches the ultimate in perfection. Receiving its inspiration from the superb Model 10 precision turntable the Model 15 seeks to emulate the excellence of our Models 20/3/ & 30/2 turntable whilst retaining the more compact footprint preferred by many of our enthusiasts.


£ 6,179.00 *
£ 8,052.00 *
* Only available for purchase in-store
Pro-Ject The Classic Turntable
Pro-Ject The Classic Turntable
To celebrate their 25 year anniversary, Pro-Ject Audio are combining traditional design with modern technology in a brand new turntable model. The aptly named 'Classic' is a sleek, compact and elegant turntable based around the "frame" design popularised by the likes of Thorens and Linn in the 1950's and 60's, but implemented with the innovative technologies Pro-Ject have become known for.

The two-plinth


Availability Retail (inc. 20% VAT)
£ 899.00
£ 899.00
£ 899.00
Quantity / Units:
Linn (MECH 072/2) No.6 X 3/4 POZI RND Woodscrew Black Zinc
Linn (MECH 072/2) No.6 X 3/4 POZI RND Woodscrew Black Zinc
Linn self tapping black zinc 3/4" woodscrews.
These 3/4" length wood screws are used in the following places on the Linn LP12 Turntable:

4x used to attach the 4 rubber feet through the baseboard and into the base of the wooden plinth.
2x used on the baseboard to secure the middle rectangular washers.
2x used for the plastic Mains cable clamp on exiting the wooden plinth.
2x used for the mains cable clamp found on the wiring strap.


Availability Retail (inc. 20% VAT)
£ 0.30
Quantity / Units:
Page 1†† ( Displaying 10 of 196 Products )
Turntables - Page 1 Turntables - Page 1 (Previous Page)
Page 1 of 20
Turntables - Page 2 (Next Page) Turntables - Page 20 (Last Page)


Search for products that may contain the words:
within using




order today, delivered tomorrow!*

Home | About | Contact | News | FAQ | Glossary | Classifieds | Testimonials | Install | Sitemap

Hi-fi | Home cinema | Multi-room

* Where product is stocked and order received before 2pm