The secret to great lighting is being able to control it. Match your activity or mood to your visual environment. Set the lights as you need them and the setting is automatically saved as one of your custom scenes. Retrieve it later at the touch of a button; no individual switches or dimmers to adjust again and again. The possibilities are endless. In your living room, you can pre-set the lighting controls to suit the way that you live “Cinema”, “Homework”, “Entertaining”, “Cleaning”. Then with a hand-held remote control (or even your universal TV remote), you can change the ambience of your room without leaving your chair. You can control all the lights in one room or indeed the whole house from just one button and control natural light with a motorised window solution. You can also link the lighting controls to your security and AV systems.
Control Units have both a maximum power capacity limit per zone and a maximum power capacity limit per unit. Each zone cannot exceed the total Watts listed on the product, and each unit cannot exceed the total Watts outlined for the product. However, the maximum unit capacity can be allocated among each individual zone in the unit. For example, on a 4-zone unit at 230V with a maximum zone capacity of 800W and a maximum unit capacity of 2300W, some zones will not reach the individual zone maximum because the total unit maximum cannot exceed 2300W. Check total unit maximums before ordering
|
Page 9
( Displaying 10 of 102 Products )
|
|
|
Rako RAK-4T (RAK4T) 4 Channel Railing Edge Dimming Rack
|
|
A four channel dimming rack, designed to be wall mounted in an electrical cupboard. Incorporating the latest dimming technology. Hybrid IGBT design enables leading and trailing edge control of lighting loads, quietly and smoothly. The dimmer has four separated dimming channels that can control a total of 2400w/2000va of trailing edge dimmable lighting loads. In parallel with the 4 dimmer channel is a separate switched relay channel for LEDs or Fans or other non dimmed loads. The RAK-4 requires a separate RF receiver (RxLink) which connects using standard CAT5 RJ45 sockets. Controlled from any Rako RAKOM RF device, for example the RCP07 or RCM070.
|
|
Rako RMS800 800W Ceiling Mount Switch Module External Aerial
|
|
The RMS800 in-line RF switch module for non
dimmable loads
Designed to fit in a ceiling void or cupboard, the RMS800 module
can control up to 800VA of mains non-dimmable lighting loads. The
unit can also be used for exterior lighting control applications, with
the use of a weatherproof IP rated enclosure.
16 Scene memory capacity, can be fully integrated into Rako wired
systems.
Easy set-up and manual On/Off control using the set-up button.
Full rising clamp terminals and mounting bracket for easy installation.
Programmed
|
|
Rako RDA800 Universal Control Module
|
|
A compact 800VA RF dimmer
for 1-10V, DALI and DSI
controllable loads.
Connected in-line before the first
lighting fitting the RMS800
enables switching of up to
800VA of 0-10V, DALI and DSI
controllable loads such as LED
drivers and dimmable
fluorescent ballasts.
Controlled from any Rako
Rakom RF device, for example
the RCP/RCM push button RF
wall-plates.
ANALOGUE CONTROL
Designed to fit in a ceiling void or cupboard, the RDA800 module
can control up to 800VA of 0-10V, DALI and DSI controllable lighting
loads. Control signal output mode (0-10V, DALI or DSI) is user
selectable via a connecting link. The unit can also be used for
exterior lighting control applications, with the use of a weatherproof
IP rated enclosure.
|
|
Rako RMT1200 Trailing Edge 1200W Ceiling Mount Dimmer External Aerial
|
|
A compact 1200w RF dimmer designed to be mounted in a ceiling void using an access panel or wall mounted in an electrical cupboard. The dimmer is connected in-line before the first light fitting, to enable dimming of up to 1200w/1000va of trailing edge dimmable loads. Controlled from any Rako RAKOM RF device, for example the RCP07 or RCM070 push button RF wallplates.
Designed to fit in a ceiling void using an access panel or an electrical cupboard, the RMT1200 capacative dimmer can control up to 1200 watts of mains dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure.
|
|
Rako RMT500 Trailing Edge 500W Dimmer Module
|
|
The RMT500 in-line RF dimmer for GU10 LED lamps,
tungsten, low-voltage halogen and other trailing edge
dimmable loads.
Designed to fit in a ceiling void or cupboard, the RMT500 trailing edge
dimmer can control up to 500 watts of mains dimmable lighting loads.
The unit can also be used for exterior lighting control applications, with the
use of a weatherproof IP rated enclosure.
The RMT500 uses trailing edge dimming technology to maximise the
performance
|
|
Rako RML500 - 500W Ceiling Mount Dimmer External Aerial
|
|
A compact 500w RF dimmer designed to fit through the aperture of a standard low voltage down light fitting. The dimmer is connected in-line before the first light fitting, to enable dimming of up to 500w of leading edge dimmable loads. Controlled from any Rako Rakom RF device, for example the RCM/RCP push button RF wall plate.
Designed to fit in a ceiling void or cupboard, the RML500 inductive dimmer can control up to 250 watts of mains dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure.
|
|
Rako RML250 - 250W Ceiling Mount Dimmer External Aerial
|
|
A compact 250w RF dimmer designed to fit through the aperture of a standard low voltage down light fitting. The dimmer is connected in-line before the first light fitting, to enable dimming of up to 250w of leading edge dimmable loads. Controlled from any Rako Rakom RF device, for example the RCM/RCP push button RF wall plate.
FLEXIBLE CONTROL
Designed to fit in a ceiling void or cupboard, the RML250 inductive dimmer can control up to 250 watts of mains dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure.
|
|
Lutron GRAFIK Eye QS
|
|
Introducing the new GRAFIK Eye® QS
With the new GRAFIK Eye QS preset lighting control system, adjust your lights
and blinds for any task or activity in any room — commercial, institutional,
or residential. Recall these settings with the touch of a button. The new GRAFIK Eye QS provides convenient control and enhancement of the visual environment.
GRAFIK Eye QS improves architectural lighting control:
|
|
Lutron GRX-CI-RS232 Control Interface
|
|
• Integrates a GRAFIK Eye Lighting & Shade Control System with a touchscreen, PC, or other digital equipment that supports RS232 communication.
• Provides monitoring commands that allow a touchscreen or PC to query GRAFIK Eye Control Units to:
- Determine which scene is selected.
- Read individual zone’s intensity.
- Keep track of buttons pressed.
• Provides control commands that allow a touchscreen or PC to operate GRAFIK Eye Control Units to:
|
|
Rako RCP02 Controller
|
|
2-Button Controller. Off + Scene 1. No Presets or Fader.
The RCP02 is the basic keypad for all Rako modules where scene selection and fader operation are not required. Two buttons provide the selection of scene 1 and ‘off’.
The RCP02 communicates with other Rako devices, such as the RD range of dimmer modules, using coded FM radio data transmission, ensuring reliable interference-free operation. Rakom-coded radio transmission eliminates the need for any data or power cabling enabling the system to be installed with the minimum of fuss and disruption.
|
|
Page 9
( Displaying 10 of 102 Products )
|
|
Search for products that may contain the words:
within
using