|
Page 1
( Displaying 10 of 15 Products )
|
|
|
ISOL-8 Qube 2
|
|
This range of cube shaped, powerful, single channel conditioners are aimed specifically at high performance power amplifiers or any other power hungry load.
During the design stages of the Isol-8 SubStation² it was discovered that power amplifiers responded to effective conditioning perhaps more than any other piece of audio equipment.
In spite of their great weight, the practical and elegant cuboid design of Isol-8's Qube²s enables the smallest of footprints.
|
|
ISOL-8 MainLine
|
|
The MainLine² is an extremely high quality mains lead utilising IsoLink 'OFC' cable and incorporating Isol-8's cutting edge filtering module. This module contains up to 28 individual components, designed to remove most sources of mains borne or generated noise without sacrificing a system's dynamics. The filter itself features a custom-made, high current inductor for common mode, wide band noise removal; and a series of VDRs and other transient suppression devices in a delta format across all three lines to eliminate voltage spikes that could otherwise damage expensive equipment.
|
|
ISOL-8 IsoPlug
|
|
The IsoPlug² is Isol-8's entry-level mains noise eliminator.
The majority of appliances that draw power in the home environment, for example computers, fridge freezers, TVs, etc, corrupt the mains electricity supply. For the Hi-Fi afficianado the result is a heavily distorted waveform and this is not good for audio or AV equipment.
The irony is that many audio products (and often the best ones) produce a lot of noise themselves. Without doubt, the best way to attenuate that noise is as close as possible to its source. To solve this problem Isol-8 have created the IsoPlug².
|
|
|
|
|
|
|
|
|
|
|
Discontinued
|
|
|
|
ISOL-8 IsoLink
|
|
The IsoLink is an extremely high quality mains lead using high grade Oxygen Free Copper (OFC) conductors and improved RF shielding. A transparent outer jacket finishes this highly flexible lead.
These lsoLink leads continue to deliver performance far ahead of their price point and are ideal as upgrades to any Hi-Fi components or for use with other ISOL-8 products.
Available in three versions:
IsoLink
|
|
ISOL 8 The Grid
|
|
The Grid is an outstandingly flexible one box solution for multi-component installations. It combines high quality mains conditioning for improved system performance with intelligent power management and convenient distribution.
The rugged 3U chassis, features a locking 20A locking Neutrik connector for input with a high quality double pole breaker providing instantly available reset in the event of over current. When connected directly to a spur by a qualified electrician, a maximum total capacity of 20A is available across the unit. 13A being available with standard mains connection. Each output channel has a front panel mounted fuse with status indicator, outputs are via an IEC outlet on the rear. Input voltage is displayed by a true RMS display.
|
|
ISOL 8 Qube³
|
|
The original Qube was designed to isolate and fully condition power for demanding high power loads such as amplifiers, projectors and active speakers. It was a huge success, but its replacement: the all new Qube³ is simply a revelation.
The familiar striking enclosure has got smaller and lighter and houses a new filter topology. This avoids the need for an isolation transformer, lowering the load's loop impedance dramatically.
|
|
ISOL 8 Twin Channel PowerStation
|
|
The purpose of the PowerStation is simple: to get as close to the perfect low power supply as is practically possible. Two independent channels of clean, pure regenerated power will transform even the highest quality source components.
At the heart of the PowerStation are three microcontrollers, which oversee operation and generate two ultra stable waveforms of purity (0.05%THD) that are simply unobtainainable from your domestic supply.
|
|
ISOL 8 SubStation Vogue
|
|
The SubStation Vogue sits at the peak of passive mains conditioning performance. It offers a powerful package for complete systems with many unique features.
As with the Minisub and SubStation, the six surge and spike protected outlets are divided into two groups for high and low power loads respectively: Each group has its own dedicated AC input via 20A latching Neutrik connectors with individual breakers.
|
|
ISOL 8 Substation³
|
|
The Substation³ is a true high performance mains conditioning and distribution solution for a complete system.
Sharing the proven format of the Minisub2, but with improved performance, the Substation³ has six outputs divided into four low current and two high current outlets.
The four outlets optimised for source components each have their own dedicated filter. This prevents noise generated from each component within the system degrading the performance of another. This key feature allowed the original Minisub to take the market by storm by punching far above its weight. The Substation³ refines the principle further, the powerful filter topology gives excellent electrical performance, individually isolating each output.
|
|
ISOL 8 ISOLINK Neutrik 32
|
|
The IsoLink is an extremely high quality mains lead using high grade Oxygen Free Copper (OFC) conductors and improved RF shielding. A transparent outer jacket finishes this highly flexible lead.
These lsoLink leads continue to deliver performance far ahead of their price point and are ideal as upgrades to any Hi-Fi components or for use with our own products.
SPECIFICATIONS
Diameter: 12mm O/D
Product
|
|
Page 1
( Displaying 10 of 15 Products )
|
|
Search for products that may contain the words:
within
using