Expert 210 Pro Dual
2x210 Watts Under 6Ω
The prowess of Dual-Mono amplification finally accessible.
The Expert 210 Pro combines two Expert 140 Pro units and lets you soar to whole new levels of performance, with a distorsion rate divided by 2 and an increased power reserve for each channel.
THD+N: 0.00025% THD+N
THD: 0,0001% (10W / 6Ω)
Signal-to-noise ratio: 133dB
Advanced phono stage: No
Technical Specifications:-
Range:Dual-mono
Exclusive Technologies: ADH®, SAM®, RAM®, AIR®, EVO®, DAC Magic Wire®
Streaming Services:
UPnP
Airplay®
Spotify Connect
DAISY CHAINING: Up to 8 units
Phono Stage: Standard (MM / MC)
PRE-AMPLIFIED OUTPUT: Yes (mono / stereo)
Casing: Carved out from a single aluminium block
FINISH: Dark chrome
Dimension: Width: 383mm | Depth: 383mm | Height: 40mm
Weight: 5.65Kg
PERFORMANCE:-
Power: 2x210 Watts RMS under 6Ω
Distortion at Full Power: 0.00025% THD+N
Distortion at 10W: 0.0001% THD+N
Signal-to-Noise ratio: 133dB
Output impedance: 0.001Ω
Damping factor:8000
Bandwidth:DC-30kHz @ -0.1dB, DC-95kHz @ -3dB
Phase Rotation: 0.2° at 20kHz, 0.9° at 40kHz
Thermal distorsion: Below measurement threshold
Intelligence:
1x QUAD-CORE 1GHz CPU
2x SHARC 400MHz DSP
1x 16MHz RISC processor
4x 40MHz RISC processor
1x 64MHz RISC processor
CONNECTIVITY:-
Wi-Fi: 2.4GHz / 5GHz 802.11ac, compatible with 802.11a/b/g/n
Ethernet: RJ45 100/1000 Mbps
USB:
USB Audio 2.0 Asynchronous
Very low latency
Bi-directionality (for digitisation of the analog sources)
Digital Coaxial Inputs: Up to 6x RCA 75Ω
Digital Optical Inputs: 1x TOSLINK, Up to 1x miniTOSLINK 3.5mm
SUPPORTED FORMATS:
Up to 32bits / 192kHz PCM (USB)
Up to 24bits / 192kHz PCM (AIR®, UPnP, Coaxial)
Up to 24bits / 96kHz PCM (Optical)
Up to 1bit / 3.072000MHz DSD64 (USB, Coaxial)
ANALOG INPUTS:-
Up to 2x RCA stereo
Sensitivity adjustable via the Configurator
Standard phono stage (MM / MC)
Speaker output:
4mm banana plugs, fork connectors or stripped cables
Compatible with all speakers from 8Ω to 2Ω
Short-circuit protection
Active filtering available
HOME AUTOMATION: Up to 1x RS232 3.5mm 115200 bauds (documentation available via the Configurator)
Trigger:3.5mm trigger connector, Trig In and Trig Out