Authorised Linn Dealer

Authorised Linn Dealer

DS and LP12 Turntable Specialists


why shop @ stoneaudio?
  • High end, 2 channel hi-fi experts
  • UKs finest projection home cinema room
  • Multi-room specialists
  • Installation service
  • Hugely Knowledgeable staff
  • Quality brands
  • Best prices (Price Promise)
  • 30 day money back guarantee
  • Not just a website, visit the UKs best hi-fi showroom
  • FREE parking

Krell Theatre 7XD Multichannel Class A Amplifier


Basket Empty
 
Total  0.00
Secured by Sage Pay Secured by Globalsign SSL
More Articles...

Krell Theatre 7XD Multichannel Class A Amplifier
THEATER 7 XD - 7 Channel Power Amplifier

100 Watt Amplifier Featuring Krell iBias Technology

The amplifier design uses Krell Current Mode technology that is fully differential and discrete in the critical gain stages. This results in a highly linear and extended frequency response, well beyond the range of hearing, for smooth effortless highs and tight high impact bass.

The power supply consists of two 787VA toroidal transformers and 160,000uF of capacitance. This is shared among all the channels so all of that power is available to the channels with the most demand.

In real world conditions the left, right, and center channels require the lion’s share of the power so this gives the Theater 7 a more effective power supply than other amplifiers that have smaller dedicated power supplies for each channel.

Frequency response:
20 Hz to 20 kHz +0, –0.11 dB
< 3 Hz to 200 kHz +0, –3 dB

Signal-to-noise ratio:
> 101 dB, wideband, unweighted, referred to full power output
> 114 dB, “A”-weighted

Gain: 25.5 dB

Total harmonic distortion:
< 0.02% at 1 kHz, at 100 W, 8 Ω, two channels driven;
< 0.20% at 20 kHz, at 100 W, 8 Ω, two channels driven;

Input impedance:
Single-ended: 27 kΩ;
Balanced: 54 kΩ;

Input sensitivity: Single-ended or balanced: 1.50 V RMS

Output power, per channel:
120W RMS at 8 Ω, 2 channels driven
115W RMS at 8 Ω, 3 channels driven
110W RMS at 8 Ω, 5 channels driven
105W RMS at 8 Ω, 7 channels driven
210W RMS at 4 Ω, 2 channels driven
190W RMS at 4 Ω, 3 channels driven
165W RMS at 4 Ω, 5 channels driven
140W RMS at 4 Ω, 7 channels driven

Output voltage:
93 V peak-to-peak
33 V RMS

Output current: 10 A peak
Output impedance: < 0.025 Ω, 20 Hz to 20 kHz
Damping factor: > 320, 20 Hz to 20 kHz, referred to 8 Ω

Power consumption:
Standby: 1 W
Idle: 66 W
Maximum: 2000 W

Heat output:
Standby: 3.42 BTU/hr.
Idle: 225 BTU/hr.
Maximum: 2200 BTU/hr.

Inputs:
7 single-ended via RCA connector
7 balanced via XLR connector

Outputs:
7 pairs five-way binding posts

Remote connectors:
One 12 VDC input (12 V trigger) via 3.5 mm jack

Dimensions:
17.1 in. W x 7.65 in. H x 21.10 in. D
434 mm W x 194 mm H x 536 mm D

Weight:
80 lbs., 36.4 kg (shipping)
70 lbs., 31.8 kg (unit only)

Bookmark and Share




£ 9,500.00 *
* Only available for purchase in-store
 


Search for products that may contain the words:
within using




order today, delivered tomorrow!*

Home | About | Contact | News | FAQ | Glossary | Classifieds | Testimonials | Install | Sitemap

Hi-fi | Home cinema | Multi-room

* Where product is stocked and order received before 2pm