Stereo Box S Phono
S-Line
The Pro-Ject Stereo Box S Phono is a combination of the Stereo Amp Box S, Pre Box S and Phono MM, in one stylish body, offering exceptional sound quality. The new "S" body design makes the Stereo Box S Phono a slim and elegant looking device.
The amplifier can be controlled with a slim-line IR remote, or via the simple and minimal front-facing controls*.
The built in phono stage is capable of accommodating your moving magnet cartridge with ease so no matter what MM cartridge you have you're covered.
Available with a Black or Silver faceplate.
*Please note: first generation Stereo Box S Phono (with toggle power switch, rather than push button) cannot be switched off via the remote control. They can only be turned on and off using the switch on the front panel.
Key Features:
•2x 37 watts at 4Ω
•2 ohm drive capability
•Low noise pure analogue audio circuitry
•Dual mono design principle
•3 stereo lines and phono input (RCA)
•Motor drive potentiometer
•IR remote included
•2 different face-plate colours, black or silver
Technical Specifications:-
Output Power: 2x 25W at 8Ω 2x 37W at 4Ω
Frequency Response: 20Hz - 20kHz (- 0.3dB, -2.5dB)
Channel Separation: > 40dB at 20kHz
Noise Floor: > -100dB (A weighted)
THD: < 0.05% at 10W
Gain: 22dB
Line-Level Inputs: 2x Pair RCA/Phono Sockets, 1x 3.5mm Co-Axial Jack
Phono Amplifier: Moving Magnet (MM)
RIAA- EQ Curve Accuracy: 20Hz - 20kHz / Max. 0.5dB
Input Impedance: 20kohms
Speaker Connections: 4mm Banana Plugs, Spades Connectors, or Naked Wire
Power Supply: 20V/3A DC
Power Consumption: 3A DC, < 1W In Standy
Dimensions: 206 x 40 x 150mm , 206 x 40 x 165mm (Incl. Sockets)
Weight: 1250g (Without PSU)