RML1200 - 1200VA LEADING EDGE DIMMER
The RML1200 in-line RF dimmer for Tungsten, Low
Voltage Halogen and other leading edge dimmable
loads
WHAT IS IT?
A compact 1200w RF dimmer
designed to be mounted in a
ceiling void using an access
panel or wall mounted in an
electrical cupboard.
The dimmer is connected in-line
before the first light fitting, to
enable dimming of up to
1200w of leading edge
dimmable loads.
Controlled from any Rako
Rakom RF device, for example
the RCM/RCP push button RF
wall plate.
FLEXIBLE CONTROL
Designed to fit in a ceiling void using an access panel or an
electrical cupboard, the RML1200 inductive dimmer can control up
to 1200 watts of mains dimmable lighting loads. The unit can also
be used for exterior lighting control applications, with the use of a
weatherproof IP rated enclosure.
With protection features such as field replaceable fuse, overtemperature
and voltage surge protection.
v
Programmed using either an RCP/RCM RF wallplate or the RASOFT
PC software suite, the unit stores the House, Room and Channel
address plus 16 preset scene levels in non volatile memory.
The RML1200 dimmer can be controlled from any Rako transmitter
such as RCM/RCP wallplates, RAH hand helds, Bridge modules and
forms the foundation of any Rako scene-set system.
Technical Specifications:-
Dimensions: 190x105x66mm
Input supply: 230V AC +/-10% 50Hz
Weight: 555g
Housing: ULV0 ABS
Climate Range: Temperature +2C to +40C,
Humidity +5% to 95% non
condensing
Connections: 3 way screw terminals for mains
power
Protection: Replaceable fuse protection
Auto thermal shutdown
Voltage surge protection
Load types: Incandescent mains voltage lamps
Leading edge dimmable transformers
Leading edge dimmable cold cathode
Minimum load: 20w
Maximum load: 1200VA
Terminal sizes: 2.5mm2 - Stranded
4.0mm2 - Solid
Cable entry: Bottom
Standards: Emissions - EN61000-6-3 : 2001
Immunity - EN61000-6-1 : 2001
Communication: Rakom coded fm radio, 433.9MHz
Memory: Flash memory (non volatile)