| Clearaudio Satisfy Tonearm | |
|
Features • High quality handmade Swiss vertical and lateral bearings • Pure polished sapphire bearing materials • Available Directwired for unbroken signal path from the cartridge pins through the arm tube to the phono-preamplifier or with high quality clearaudio RCA jack connectors |
| Incognito (REGA) VTA Adjuster | |
|
Have a Rega tonearm ? Ever wanted to adjust the VTA? Finally Incognito have come up with the perfect device, The EASY RISER. This solid turned aluminium tool raises or lowers your arm with every cm twist by one millimeter. EASY RISER has been designed to function with Rega turntables without modification however if your Rega tonearm is installed on a non-Rega product the mounting hole maybe too small to accommodate the EASY RISER . In these cases it may be necessary to ream out the mounting hole. |
| Incognito Rega Rewire Kits | |
|
The heart of the assembly is a gold plated aluminium slug, situated at the base of the arm pillar, to which all earths are connected, grounding the various components of the arm assembly without the use of additional ground wires. The external section of the cable is run through a Faraday cage assembly inside which, protected by a spiral polythene tube, run the left and right channel signal leads. The signal leads are therefore shielded, but held at a fixed distance from the screen. |
| Linn Ekos SE Tonearm | |
|
Setting a new performance benchmark, Ekos SE features advanced materials carefully selected for their sound performance and low resonance properties to minimise interference, resonance and microphony, and extract even more from your vinyl collection. These include |
| Linn Akito Tonearm | |
|
Akito incorporates technologies developed for Linn’s class-leading high performance tonearms to get the most from your vinyl collection. Precision bearings, accurate static tracking and precision-spring bias adjustment protect cherished vinyl recordings whilst maximising your enjoyment of the music. A strong |
| Clearaudio Stability Headshell | |
|
Clearaudio Stability headshell
SME compatible, extremely precise and stable, Aluminium or Titanium construction. Silver colour |
| Dynavector DV 507 III Tonearm | |
|
As it is a bi-axis inertia controlled tonearm the DV 507, no matter the type of cartridge can trace the music signal grooves cut in the recording with extreme accuracy. The DV 507 also provides superb trackability on warped recordings. Resolution and musical detailing are quite remarkable. |
| Graham Phantom 2 Tonearm | |
|
The PHANTOM incorporates features and design changes that are not possible to include within the 2.2 structure. The Phantom will maintain the same mounting hole pattern as the 1.5 - 2.2 series arms, so most existing arm mounts will work without modification for this exciting new design. |
| Naim ARO Uni-Pivot Tonearm | |
|
Its geometry and construction ensure that difficulties with warped records, end of side distortion and temperature or humidity problems are greatly reduced. It incorporates a fixed headshell and an extremely stiff, light arm-tube. The low slung counterweight, used to adjust tracking force, places the mass in exactly the right position for both stability and minimum inertia and will remain set even when the arm-tube is lifted clear of the turntable. |
| Michell VTA Arm Adjuster | |
|
VTA adjustment sleeve for Rega arms
A Vertical Tracking Angle adjustment sleeve for the Rega RB-300 and RB-600 arms, to be used with the new-style Rega arm board we have been making since the beginning of 1999. |
| Michell TecnoArm "A" | |
|
"The new Michell Tecnoarm addresses all three points - bearing housing (an RB250 chassis is used), wiring (Moth Incognito wiring) and end stub. The nasty plastic is binned and in its place a beautifully hewn metal stub is fitted, on to which a counterweight carrier slots." "Two (Counter) weights are supplied. One is heavier than the other, catering for cartridges weighing between 13g and 6g. The Other, smaller affair balances cartridges between 6gand 3g." |
| ClearAudio Master TQI | |
|
In tonearm design, three various systems are available: Pivoted tonearms, Unipivot tonearms and Linear tonearms. The advantage of a Linear system lies in the distortion free reproduction of the music signal as this exactly depicts what has been "cut" onto the LP. Badly designed angled positions inherent in all pivoted tonearm designs are with the installation of a Linear Tracking tonearm completely avoided. Records are cut with a linear system and only linear designs can guaranty adequate error-free reproduction. |
| Clearaudio TQI | |
|
In tonearm design, three various systems are available: Pivoted tonearms, Unipivot tonearms and Linear tonearms. The advantage of a Linear system lies in the distortion free reproduction of the music signal as this exactly depicts what has been "cut" onto the LP. Badly designed angled positions inherent in all pivoted tonearm designs are with the installation of a Linear Tracking tonearm completely avoided. Records are cut with a linear system and only linear designs can guaranty adequate error-free reproduction. |
| Clearaudio Tangent | |
|
In tonearm design, three various systems are available: Pivoted tonearms, Unipivot tonearms and Linear tonearms. The advantage of a Linear system lies in the distortion free reproduction of the music signal as this exactly depicts what has been "cut" onto the LP. Badly designed angled positions inherent in all pivoted tonearm designs are with the installation of a Linear Tracking tonearm completely avoided. Records are cut with a linear system and only linear designs can guaranty adequate error-free reproduction. |
| Clearaudio Unify Silver Carbon Tonearm | |
|
|
| ORIGIN LIVE SILVER 250 TONEARM | |
|
|
| Rega Tonearms | |
|
|
| ORIGIN LIVE REGA TONEARM MODIFICATIONS | |
|
-DAVID PRICE HI-FI WORLD MAGAZINE MODIFICATION No. 1 - Structural |
© 2010 STONEAUDIO UK LIMITED - site map
|