Authorised Linn Dealer

Authorised Linn Dealer

DS and LP12 Turntable Specialists


why shop @ stoneaudio?
  • High end, 2 channel hi-fi experts
  • UKs finest projection home cinema room
  • Multi-room specialists
  • Installation service
  • Hugely Knowledgeable staff
  • Quality brands
  • Best prices (Price Promise)
  • 30 day money back guarantee
  • Not just a website, visit the UKs best hi-fi showroom
  • FREE parking

Parasound HALO JC5 Stereo 2.0 Power Amplifier


Basket Empty
 
Total  0.00
Secured by Sage Pay Secured by Globalsign SSL
More Articles...

Parasound HALO JC5 Stereo 2.0 Power Amplifier
HALO JC5

•400 watts x 2 @ 8 Ω RMS, both channels driven
•600 watts x 2 @ 4 Ω RMS, both channels driven
•1200 watts x 1 @ 8 Ω, in bridged mode
•Circuitry designed by legendary John Curl
•Ultra-high bias Class A/AB operation
•12 watts per channel of pure Class A power
•90 amperes peak current per channel
•Stable with speaker impedance dips to 1.5 Ω
•Balanced inputs with discrete circuits
•CHK Infinium, custom 5-way speaker binding posts
•Neutrik locking XLR input connectors
•Vampire gold-plated RCA input & loop output jacks
•Direct-coupled signal path, no capacitors or inductors
•DC Servo and relay protection circuits
•AC turn-on inrush surge protection with relay bypass
•Dual-mono input stages with ±110 volt DC rails
•JFET input stage, MOSFET driver stage
•24 beta-matched 15 ampere, 60 MHz bipolar output transistors
•1.7 kVA shielded toroid power transformer with independent windings for each channel
•Independent power supplies for left & right channel input stages, driver stages, output stages
•8,880 µF Nichicon Gold Tune filter capacitors for input stages
•132,000 µF Rubycon filter capacitors for output stages
•Full power is rated all the way down to 5Hz for unrestricted low-end bass
•Harris hyper-fast soft-recovery bridge diode rectifiers
•Automatic turn-on by 12 V trigger or audio sensing
•4 rack space chassis with rear carry handles
•Rack mount hardware is included
•Available in silver or black

Technical Specifications:-
Power Output – Both Channels Driven:
400 watts x 2, 8 Ω
600 watts x 2, 4 Ω

Power Output – Bridged Mode:
1200 watts x 1, 8 Ω
Bridged 4 Ω operation is not recommended

Power measurement parameters are at 120 VAC:
0.05% THD, RMS continuous power, full audio band (20 Hz - 20 kHz)

Current Capacity:
90 amps peak, per channel

Slew Rate:
> 130 volts per microsecond

Frequency Response:
5 Hz - 100 kHz, +0/-3 dB
20 Hz - 20 kHz, +0/-0.25 dB

Total Harmonic Distortion (THD):
< 0.05 % at full power
< 0.03 % at typical listening levels

IM Distortion:
< 0.04 %

TIM: Unmeasurable

Inter-channel Crosstalk:
> 87 dB at 1 kHz
> 72 dB at 20 kHz

Input Impedance:
Unbalanced: 33 kΩ
Balanced: 66 kΩ,(33 kΩ per leg)

Total Gain: 29 dB

Input Sensitivity for 28.28 V Output into 8 Ω:
Unbalanced: 1 V
Balanced: 1 V per leg

S/N Ratio:
> 116 dB, input shorted, IHF A-weighted
> 111 dB, input shorted, unweighted

Damping Factor:
1000 at 20 k Hz

DC Trigger Requirements:
+9 Vdc to +12 Vdc, 5 mA

Audio Trigger Requirements:
2 mV - 10 mV

XLR Pin Identification:
1 = Ground (Shield)
2 = Positive
3 = Negative (Return)

Dimensions:
Width: 17-5⁄8" (448 mm)
Height without feet: 7-1⁄8" (181 mm)
Height with feet: 7-3/4" " (197 mm)
Depth: 20" (508 mm)
Depth with cables: 21-1⁄2" (546 mm)

Net Weight:
73 lb. (33.1 kg)

Shipping Weight:
90 lb. (40.8 kg)

Power Requirement:
Standby: 1 Watt
Idle (no music playing): 225 Watts
Typical listening levels: 400 Watts
Maximum: 1500 Watts

Bookmark and Share




Availability Retail (inc. 20% VAT)
£ 6,999.95
£ 6,999.95
Quantity / Units:
 


Search for products that may contain the words:
within using




order today, delivered tomorrow!*

Home | About | Contact | News | FAQ | Glossary | Classifieds | Testimonials | Install | Sitemap

Hi-fi | Home cinema | Multi-room

* Where product is stocked and order received before 2pm