Authorised Linn Dealer

Authorised Linn Dealer

DS and LP12 Turntable Specialists


why shop @ stoneaudio?
  • High end, 2 channel hi-fi experts
  • UKs finest projection home cinema room
  • Multi-room specialists
  • Installation service
  • Hugely Knowledgeable staff
  • Quality brands
  • Best prices (Price Promise)
  • 30 day money back guarantee
  • Not just a website, visit the UKs best hi-fi showroom
  • FREE parking

Ruckus T710, WAVE 2 .ac Outdoor Wireless Access Point


Basket Empty
 
Total  0.00
Secured by Sage Pay Secured by Globalsign SSL
More Articles...

Ruckus T710, WAVE 2 .ac Outdoor Wireless Access Point
Ruckus T710, WAVE 2 .ac Outdoor Wireless Access Point, 4x4:4 Stream, Omnidirectional Beamflex+

The Ruckus T710 combines Ruckus patented technologies and best-in-class industrial grade design with next generation of 802.11ac features to deliver industry-leading Wi-Fi performance, reliability and coverage for challenging high density outdoor deployments. Featuring BeamFlex+ adaptive antenna technology, the T710 offers a substantial increase in performance and range by optimizing antenna coverage on a per client, per transmission basis. BeamFlex+ additionally mitigates co-channel interference by directing Wi-Fi signals where they are needed instead of towards neighboring access points. The T710’s BeamFlex+ adaptive antenna system is also equipped with dual polarization antennas, allowing the access point to adapt to the physical orientation of client devices and maximize uplink performance.

Features:-
802.11ac 802.11ac Wave 2 Multi-User MIMO (MU-MIMO)
•Concurrent dual-band (5GHz/2.4GHz) support
•2,533Mbps maximum PHY rate (1733 Mbps in 5GHz; 800Mbps in 2.4GHz)
•BeamFlex+ (PD-MRC) smart antenna, with support for 4,000+ unique antenna patterns enables up to 5dB of additional gain and up to 15dB of additional interference mitigation
•802.11ac standard Tx Beamforming
•Antenna options: omni-directional and 120x30 degrees sector
•Unmatched Rx sensitivity down to -104dBm
•Improved Maximum Ratio Combining (MRC) for best-in-class re - ceive sensitivity
•Space Time Block Coding for increased handset performance
•Low Density Parity Check (LDPC) for increased data throughput at all ranges
•256-QAM support on 5GHz and 2.4GHz
•Admission control/load balancing*
•Band balancing
•Four software QoS queues per client station
•Up to 16 BSSIDs per radio with unique QoS and security policies*
•Backward compatible with legacy 802.11 clients
•Dedicated dual band RF monitor enabling enhanced performance while providing Zero-Wait DFS capability
•WPA-PSK (AES), 802.1X support for RADIUS and AD* INTERFACES
•2 x 1GbE ports

Technical Specifications:-

POWER:
•AC input: 100-250 Vac, 50/60 Hz
•PoE: 802.3at

PHYSICAL SIZE:
•31.7 cm (L). 24.1 cm (W). 9.5 cm (H)

WEIGHT: •6.5lbs

RF:
• Adaptive antenna array: 4,000+ unique antenna patterns, polarization diversity
• Maximum Transmit Power: 28 dBm on 2.4GHz; 28dBm on 5GHz
• Physical antenna gain: Omni - 3 dBi (2.4 and 5GHz); Sector - 6dBi(2.4GHz), 8 dBi (5GHz)
• BeamFlex SINR Tx gain: up to 6dB
• BeamFlex SINR Rx gain: up to 3-5dB
• Interference mitigation: up to 15dB
• Minimum Rx sensitivity: -104dBm

ETHERNET PORTS:
• 2 Ethernet ports, auto MDX, auto-sensing, 10/100/1000 Mbps, RJ-45
• Power over Ethernet (802.3at) with Category 5/5e/6 cable
• Power over Ethernet (802.3at) Output with Category 5/5e/6 cable
• Link Aggregation (LACP)
• SFP port to support fiber backhaul

ENVIRONMENTAL CONDITIONS:
• Operating Temperature:-40°F (-40°C) to 149°F (65°C)
• Operating Humidity: up to 95% non-condensing

POWER CONSUMPTION:
• When PoE Out is not used
• 5.5W (minimum)
• 10.4W (typical)
• 25W peak

PERFORMANCE AND CAPACITY:-

PHY DATA RATES:
•Up to 800Mbps (2.4GHz)
•Up to 1733Mbps (5GHz)

CONCURRENT STATIONS:
•Up to 512:

NUMBER OF SIMULTANEOUS VOIP CLIENTS:
•Up to 30

NETWORK ARCHITECTURE:-

IP: • IPv4, IPv6, dual-stack

VLANS:
• 802.1Q (1 per BSSID or dynamic, per user based on RADIUS)
• Port-based

802.1X FOR WIRED PORTS:
• Authenticator
• Supplicant

TUNNELING: • L2TP

MULTIMEDIA AND QUALITY OF SERVICE:-

8022.11E/Wmm: •Supported
SOFTWARE QUEUES: •Per WLAN priority (2), Per Traffic type (4). per client
TRAFFIC CLASSIFICATION: •Automatic, heurisitcs and TOS based or VLAN-defined
RATE LIMITING: •Dynamic per-user or per-WLAN

MANAGEMENT:-

DEPLOYMENT OPTIONS:
•Standalone (individually managed)
•Cantrally managed

WI-FI:-

STANDARDS: • IEEE 802.11a/b/g/n/ac

SUPPORTED DATA RATES:
• 802.11ac: 29.3Mbps – 1733 Mbps (80MHz)
• 802.11n: 6.5Mbps – 216.7 Mbps(20MHz) 13.5 Mbps – 800Mbps (40MHz)
• 802.11a: 54, 48, 36, 24, 18, 12, 9 and 6Mbps
• 802.11b: 11, 5.5, 2 and 1Mbps
• 802.11g: 54, 48, 36, 24, 18, 12, 9 and 6Mbps

RADIO CHAINS/ STREAMS: • 4x4:4

MIMO: • SU-MIMO — Up to 4 streams
• MU-MIMO — Up to 3 streams

CHANNELISATION: • 20 MHz, 40 MHz, and/or 80 MHz

FREQUENCY BANDS:
• IEEE 802.11ac: 5.15 – 5.85GHz
• IEEE 802.11a/n: 5.15 – 5.85GHz
• IEEE 802.11b: 2.4 – 2.484GHz

BSSIDS:
• Up to 16 (2.4GHz)
• Up to 16 (5GHz)

POWER SAVE: • Supported

CERTIFICATIONS:
• WEEE/RoHS compliance
• EN 60601-1-2 Medical
• Wi-Fi Alliance certified
• UL 2043 plenum rated

SUBWAY AND RAILROAD CERTIFICATIONS:
• EN50121-1 EMC
• EN50121-4 Immunity
• IEC 61373 Shock & Vibration

Bookmark and Share




Please call to arrange demonstration
 


Search for products that may contain the words:
within using




order today, delivered tomorrow!*

Home | About | Contact | News | FAQ | Glossary | Classifieds | Testimonials | Install | Sitemap

Hi-fi | Home cinema | Multi-room

* Where product is stocked and order received before 2pm