{"title":"Atacama Audio","description":"Atacama has been designing and manufacturing innovative audiovisual furniture for over 20 years. In the beginning, Atacama's speaker stands redefined the design of loudspeaker supports, setting a standard that had not previously been achieved. The revolutionary approach to product design continued with dedicated audio visual furniture that was aesthetically appealing, but also allowed the equipment it supports to achieve optimum performance. A cornerstone of their design philosophy is to create modular products that evolve with customers' needs. Models such as Equinox and Europa offer this facility, while achieving cutting-edge style and sonic performance far beyond their price tag.","products":[{"product_id":"atacama-atabites","title":"Atacama Atabites","description":"\u003cp\u003eIn order to get the best possible sound from your speaker stands, it is reccomended that the main columns are filled with a high density inert filler .This will reduce ringing and give a sonically dead platform from which to position bookshelf style speakers. By adjusting the amount of filler used, you can experiment to find the optimum amount of filler to suit your speakers .Featuring new zinc coated micro-discs, the NEW UPGRADED Atabite inert filler now gives increased density to volume over the old Atabite inert filler and has a uniformed particulate size giving consistant sonic performance. The Zinc coating reduces any oxidisation and degradation and enhances the visual aesthetics.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePLEASE NOTE- Atabites are supplied by weight, not volume. (7.5 KG tubs). Some settling of contents may occur in transit. Here is the maximum Approximate weight of Atabites that can be used in each pair of speaker stands:-\u003cbr\u003eMoseco 6 Duo 6=10.4KG \u003cbr\u003eMoseco 7 Duo 7=12.2KG \u003cbr\u003eMoseco 10 21KG,Duo 10=N\/A\u003cbr\u003eNexus 6i=8.2KG \u003cbr\u003eNexus7i=12.2KG \u003cbr\u003eNexus10i=21KG\u003cbr\u003eSL200=7.2KG \u003cbr\u003eSL300=15.2KG \u003cbr\u003eSL400=24KG \u003cbr\u003eSL500=32.8KG \u003cbr\u003eSL600=41.6KG \u003cbr\u003eSL700=48.8KG \u003cbr\u003eSL1000=68KG\u003cbr\u003eHMS1.1 500mm=34KG \u003cbr\u003eHMS1.1 600mm=41.8KG \u003cbr\u003eHMS1.1 700mm=55.4KG \u003cbr\u003eHMS2.1=84KG.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSonic results will depend on speaker stand positioning, type of speaker, room size, type of electronics and cabling, listening position and personal taste. However, as a general rule filling the stands approximately two thirds full generally gives the best results. NOT suitable for Aurora 6 Speaker stands.\u003c\/p\u003e","brand":"Atacama Audio","offers":[{"title":"Default Title","offer_id":57407439929676,"sku":"ATACAMAATABITES","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/atacama-atabites.jpg?v=1777457201"},{"product_id":"atacama-hd-floor-spike-shoes","title":"Atacama HD Floor Spike Shoes","description":"\u003cp\u003eSpike Shoes allow the use of spikes on laminate\/wood floors and also offer an additional degree of isolation. Supplied in a set of 4. Available in satin black and nickel silver.\u003c\/p\u003e\n\u003cp\u003eAtacama High Density spike shoes are made of a copper \/zinc alloy construction, and feature a hole on the upper surface to locate the spike and on its lower surface, a non slip E.P.D.M. elastomer membrane designed to protect delicate floor coverings and aid sound dampening. Each HD-S spike shoe has a diameter of 20mm, making the HD-S suitable for most speaker stands and Hifi rack applications with a overall maximum weight spread over all four shoes of 70KG. They are available in a choice of two colours, Satin Black or Nickel Silver.\u003cbr\u003eHD-S is most suitable for DUO, NEXUS, AURORA and the smaller height options of SL speaker stands.For AV supports, Most Hifi racks and heavy speaker stand applications like the HMS series and larger SL series , or if the flooring is made of a soft material for example pinewood, Atacama recommend HD-L spike shoes which with their wider circumference offering a higher weight rating and a larger surface area to spread the load.\u003c\/p\u003e\n\u003cp\u003eThe HD-L suitable for most speaker stands and Hifi rack applications with a overall maximum weight spread over all four shoes of 125KG. They are available in a choice of two colours, Satin Black or Nickel Silver.\u003cbr\u003eHD-L spike shoes are suitable for all Atacama products with spiked feet, especially Hifi racks and heavy speaker stand applications like the HMS series and larger SL series , or if the flooring is made of a exceptionally soft material and the load needs to be spread, for example pinewood planking. They are not brand specific and can be used with other spiked feet furnture providing the weight tolerance recommendations are adheard to.\u003c\/p\u003e","brand":"Atacama Audio","offers":[{"title":"Atacama HD-S Floor Spike Shoes (4) - Silver","offer_id":57407439962444,"sku":"ATACAMASSHOESS","price":16.66,"currency_code":"GBP","in_stock":true},{"title":"Atacama HD-S Floor Spike Shoes (4) - Black","offer_id":57416248426828,"sku":"ATACAMASSHOESB","price":16.66,"currency_code":"GBP","in_stock":true},{"title":"Atacama HD-L Floor Spike Shoes (4) - Silver","offer_id":57416249246028,"sku":"ATACAMASSHOESB","price":18.32,"currency_code":"GBP","in_stock":true},{"title":"Atacama HD-L Floor Spike Shoes (4) - Black","offer_id":57416249311564,"sku":"ATACAMASSHOESB","price":18.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/atacama-hd-s-spike-shoes-black.jpg?v=1777457206"},{"product_id":"atacama-slx-200-speaker-stands","title":"Atacama SLX 200 Speaker Stands","description":"The SLX Series is our professional range of speaker stands available in a wide range of height options and caters for when a larger top plate is required.\u003cbr\u003e\u003cbr\u003e\n\nSLX Series are supplied in a Satin Black paint finish with Silver Metallic or Diamond White as a cost option.\u003cbr\u003e\u003cbr\u003e\n\nEach pair of SLX stands include new 5mm thick laser cut carbon steel base plates, eight BZP 8mm adjustable floor spikes featuring stainless steel detailed top caps and upgraded High Load Trapezoidal (HLT) Isolation Gel Pads for the top plates.\u003cbr\u003e\u003cbr\u003e\n\nWe recommend that each pair are mass loaded with Atabites in order to maximize their sonic potential (see below for quantity guidance and recommendations on the amount of mass filler to use).\u003cbr\u003e\u003cbr\u003e\n\nFloor spikes and HLT Isolation Gel pads are included with each pair of stands, with the option of adding Atabite mass loading filler, top spikes and spike shoes if required.\u003cbr\u003e\u003cbr\u003e\n\nAs these speaker stands use isolation spikes, two sets of four Atacama HD-S (Nickel finish) spike shoes are recommended to protect delicate floor coverings.\u003cbr\u003e\u003cbr\u003e\n\nSingle stands can be supplied if required; please contact your local Atacama stockist or the Atacama sales department on 01455 283251 for pricing and availability (UK only).\u003cbr\u003e\u003cbr\u003e\n\nSLX speaker stands are designed and manufactured in the UK.\u003cbr\u003e\u003cbr\u003e\n\nDimensions:-\u003cbr\u003e\n\nOverall Height (Including HLT Gel Pads and Floor Spikes)\n\nSLX 200      245mm   (9.6”)\u003cbr\u003e\nTop Plate Dimensions\n\nWidth 225mm (8.9”), Depth 225mm (8.9”)\u003cbr\u003e\n\nBase Plate Dimensions\n\nWidth 305mm (12”), Depth 305mm (12”)\u003cbr\u003e\n\nWeight Capacity 15KG per stand.\u003cbr\u003e\u003cbr\u003e\n\nNote- Supported speaker width\/depth dimensions should not exceed speaker stand base plate dimensions.\u003cbr\u003e\u003cbr\u003e\n\n \n\nAtabite quantity recommendation\u003cbr\u003e\n\nBelow are stated the recommended number of tubes to share between each pair of speaker stands. All vertical poles should be equally filled. Amounts are approximate and will not necessarily completely fill the tubes. It is suggested that you experiment with the exact amount to achieve the best sonic results for your particular system setup as the speakers, room acoustics, cable loom, positioning of the speakers and hifi components will determine how much Atabite filler to use to get the best sound from your speakers.\u003cbr\u003e\u003cbr\u003e\n\nAs a general rule, approximately half to two thirds full gives the best results. If you find the speakers are lacking high end detail and sounding dull at the lower end that usually means you have overfilled the stands and will need to reduce the volume of Atabites in each stand.\u003cbr\u003e\u003cbr\u003e\n\n If the speakers are new, it is suggested that the exact amount of Atabites needed will best be determined once they are run in. Refer to your speaker instructions or contact the supplying retailer\/ manufacturer for guidelines on running in recommendations.\u003cbr\u003e\u003cbr\u003e\n\n \n\nSLX 200     1 Tube   ","brand":"Atacama Audio","offers":[{"title":"(pair) - Satin Black","offer_id":57407441895756,"sku":"ATACAMASLX200-B","price":124.99,"currency_code":"GBP","in_stock":true},{"title":"(pair) - Silver Metallic","offer_id":57416251736396,"sku":"ATACAMASLX200S","price":141.66,"currency_code":"GBP","in_stock":true},{"title":"(pair) - Diamond White","offer_id":57416251769164,"sku":"ATACAMASLX200-dw","price":141.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Atacama-SLX200-Black.jpg?v=1777457249"},{"product_id":"atacama-slx-300-speaker-stands","title":"Atacama SLX 300 Speaker Stands","description":"SLX 300 Speaker Stands (Pair)\u003cbr\u003e\u003cbr\u003e\n\n\nThe SLX Series is our professional range of speaker stands available in a wide range of height options and caters for when a larger top plate is required.\u003cbr\u003e\u003cbr\u003e\n\nSLX Series are supplied in a Satin Black paint finish with Silver Metallic or Diamond White as a cost option.\u003cbr\u003e\u003cbr\u003e\n\n\n\nEach pair of SLX stands include new 5mm thick laser cut carbon steel base plates, eight BZP 8mm adjustable floor spikes featuring stainless steel detailed top caps and upgraded High Load Trapezoidal (HLT) Isolation Gel Pads for the top plates.\u003cbr\u003e\u003cbr\u003e\n\nWe recommend that each pair are mass loaded with Atabites in order to maximize their sonic potential (see below for quantity guidance and recommendations on the amount of mass filler to use).\u003cbr\u003e\u003cbr\u003e\n\nFloor spikes and HLT Isolation Gel pads are included with each pair of stands, with the option of adding Atabite mass loading filler, top spikes and spike shoes if required.\u003cbr\u003e\u003cbr\u003e\n\nAs these speaker stands use isolation spikes, two sets of four Atacama HD-S (Nickel finish) spike shoes are recommended to protect delicate floor coverings.\u003cbr\u003e\u003cbr\u003e\n\nSingle stands can be supplied if required; please contact your local Atacama stockist or the Atacama sales department on 01455 283251 for pricing and availability (UK only).\u003cbr\u003e\u003cbr\u003e\n\nSLX speaker stands are designed and manufactured in the UK.\u003cbr\u003e\u003cbr\u003e\n\nDimensions:-\u003cbr\u003e\n\nOverall Height (Including HLT Gel Pads and Floor Spikes)345mm   (13.6”)\u003cbr\u003e\n\nTop Plate Dimensions\n\nWidth 225mm (8.9”), Depth 225mm (8.9”)\u003cbr\u003e\n\nBase Plate Dimensions\n\nWidth 305mm (12”), Depth 305mm (12”)\u003cbr\u003e\n\nWeight Capacity 15KG per stand.\u003cbr\u003e\n\nNote- Supported speaker width\/depth dimensions should not exceed speaker stand base plate dimensions.\u003cbr\u003e\u003cbr\u003e\n\n \n\nAtabite quantity recommendation\u003cbr\u003e\n\nBelow are stated the recommended number of tubes to share between each pair of speaker stands. All vertical poles should be equally filled. Amounts are approximate and will not necessarily completely fill the tubes. It is suggested that you experiment with the exact amount to achieve the best sonic results for your particular system setup as the speakers, room acoustics, cable loom, positioning of the speakers and hifi components will determine how much Atabite filler to use to get the best sound from your speakers.\u003cbr\u003e\u003cbr\u003e\n\nAs a general rule, approximately half to two thirds full gives the best results. If you find the speakers are lacking high end detail and sounding dull at the lower end that usually means you have overfilled the stands and will need to reduce the volume of Atabites in each stand.\u003cbr\u003e\u003cbr\u003e\n\n If the speakers are new, it is suggested that the exact amount of Atabites needed will best be determined once they are run in. Refer to your speaker instructions or contact the supplying retailer\/ manufacturer for guidelines on running in recommendations. \u003cbr\u003e\u003cbr\u003e\n\n \nSLX 300     2 Tubes         \n","brand":"Atacama Audio","offers":[{"title":"Black (pair)","offer_id":57407441994060,"sku":"ATACAMASLX300B","price":133.32,"currency_code":"GBP","in_stock":true},{"title":"Silver (pair)","offer_id":57416252784972,"sku":"ATACAMASLX300S","price":149.99,"currency_code":"GBP","in_stock":true},{"title":"White (pair)","offer_id":57416253669708,"sku":"ATACAMASLX300W","price":149.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Atacama-SLX-300-Black.jpg?v=1777457253"},{"product_id":"atacama-slx-400-speaker-stands","title":"Atacama SLX 400 Speaker Stands","description":"SLX 400 Speaker Stands (Pair)\u003cbr\u003e\u003cbr\u003e\n\nThe SLX Series is our professional range of speaker stands available in a wide range of height options and caters for when a larger top plate is required.\u003cbr\u003e\u003cbr\u003e\n\nSLX Series are supplied in a Satin Black paint finish with Silver Metallic or Diamond White as a cost option.\u003cbr\u003e\u003cbr\u003e\n\n\n\nEach pair of SLX stands include new 5mm thick laser cut carbon steel base plates, eight BZP 8mm adjustable floor spikes featuring stainless steel detailed top caps and upgraded High Load Trapezoidal (HLT) Isolation Gel Pads for the top plates.\u003cbr\u003e\u003cbr\u003e\n\nWe recommend that each pair are mass loaded with Atabites in order to maximize their sonic potential (see below for quantity guidance and recommendations on the amount of mass filler to use).\u003cbr\u003e\u003cbr\u003e\n\nFloor spikes and HLT Isolation Gel pads are included with each pair of stands, with the option of adding Atabite mass loading filler, top spikes and spike shoes if required.\u003cbr\u003e\u003cbr\u003e\n\nAs these speaker stands use isolation spikes, two sets of four Atacama HD-S (Nickel finish) spike shoes are recommended to protect delicate floor coverings.\u003cbr\u003e\u003cbr\u003e\n\nSingle stands can be supplied if required; please contact your local Atacama stockist or the Atacama sales department on 01455 283251 for pricing and availability (UK only).\u003cbr\u003e\u003cbr\u003e\n\nSLX speaker stands are designed and manufactured in the UK.\u003cbr\u003e\u003cbr\u003e\n\nDimensions:-\u003cbr\u003e\n\nOverall Height (Including HLT Gel Pads and Floor Spikes)445mm   (17.5”)\u003cbr\u003e\n\nTop Plate Dimensions\n\nWidth 225mm (8.9”), Depth 225mm (8.9”)\u003cbr\u003e\n\nBase Plate Dimensions\n\nWidth 305mm (12”), Depth 305mm (12”)\u003cbr\u003e\n\nWeight Capacity 15KG per stand.\u003cbr\u003e\n\nNote- Supported speaker width\/depth dimensions should not exceed speaker stand base plate dimensions.\u003cbr\u003e\u003cbr\u003e\n\n \n\nAtabite quantity recommendation\u003cbr\u003e\n\nBelow are stated the recommended number of tubes to share between each pair of speaker stands. All vertical poles should be equally filled. Amounts are approximate and will not necessarily completely fill the tubes. It is suggested that you experiment with the exact amount to achieve the best sonic results for your particular system setup as the speakers, room acoustics, cable loom, positioning of the speakers and hifi components will determine how much Atabite filler to use to get the best sound from your speakers.\u003cbr\u003e\u003cbr\u003e\n\nAs a general rule, approximately half to two thirds full gives the best results. If you find the speakers are lacking high end detail and sounding dull at the lower end that usually means you have overfilled the stands and will need to reduce the volume of Atabites in each stand.\u003cbr\u003e\u003cbr\u003e\n\n If the speakers are new, it is suggested that the exact amount of Atabites needed will best be determined once they are run in. Refer to your speaker instructions or contact the supplying retailer\/ manufacturer for guidelines on running in recommendations. ","brand":"Atacama Audio","offers":[{"title":"Satin Black (pair)","offer_id":57407442157900,"sku":"ATACAMASLX400B","price":141.66,"currency_code":"GBP","in_stock":true},{"title":"Silver Metallic (pair)","offer_id":57416255078732,"sku":"ATACAMASLX400S","price":158.32,"currency_code":"GBP","in_stock":true},{"title":"Diamond White (pair)","offer_id":57416255897932,"sku":"ATACAMASLX400G","price":158.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Atacama-SLX-400-Black.jpg?v=1777457257"},{"product_id":"atacama-slx-500-speaker-stands","title":"Atacama SLX 500 Speaker Stands","description":"SLX 500 Speaker Stands (Pair)\u003cbr\u003e\u003cbr\u003e\n\nThe SLX Series is our professional range of speaker stands available in a wide range of height options and caters for when a larger top plate is required.\u003cbr\u003e\u003cbr\u003e\n\nSLX Series are supplied in a Satin Black paint finish with Silver Metallic or Diamond White as a cost option.\u003cbr\u003e\u003cbr\u003e\n\n\n\nEach pair of SLX stands include new 5mm thick laser cut carbon steel base plates, eight BZP 8mm adjustable floor spikes featuring stainless steel detailed top caps and upgraded High Load Trapezoidal (HLT) Isolation Gel Pads for the top plates.\u003cbr\u003e\u003cbr\u003e\n\nWe recommend that each pair are mass loaded with Atabites in order to maximize their sonic potential (see below for quantity guidance and recommendations on the amount of mass filler to use).\u003cbr\u003ev\n\nFloor spikes and HLT Isolation Gel pads are included with each pair of stands, with the option of adding Atabite mass loading filler, top spikes and spike shoes if required.\u003cbr\u003ev\n\nAs these speaker stands use isolation spikes, two sets of four Atacama HD-S (Nickel finish) spike shoes are recommended to protect delicate floor coverings.\u003cbr\u003e\u003cbr\u003e\n\nSingle stands can be supplied if required; please contact your local Atacama stockist or the Atacama sales department on 01455 283251 for pricing and availability (UK only).\u003cbr\u003e\u003cbr\u003e\n\nSLX speaker stands are designed and manufactured in the UK.\u003cbr\u003e\u003cbr\u003e\n\nDimensions:-\n\nOverall Height (Including HLT Gel Pads and Floor Spikes)   545mm   (21.5”)\u003cbr\u003e\n\nTop Plate Dimensions\n\nWidth 225mm (8.9”), Depth 225mm (8.9”)\u003cbr\u003e\n\nBase Plate Dimensions\n\nWidth 305mm (12”), Depth 305mm (12”)\u003cbr\u003e\n\nWeight Capacity 15KG per stand.\u003cbr\u003e\n\nNote- Supported speaker width\/depth dimensions should not exceed speaker stand base plate dimensions.\u003cbr\u003e\u003cbr\u003e\n\n \n\nAtabite quantity recommendation\u003cbr\u003e\n\nBelow are stated the recommended number of tubes to share between each pair of speaker stands. All vertical poles should be equally filled. Amounts are approximate and will not necessarily completely fill the tubes. It is suggested that you experiment with the exact amount to achieve the best sonic results for your particular system setup as the speakers, room acoustics, cable loom, positioning of the speakers and hifi components will determine how much Atabite filler to use to get the best sound from your speakers.\u003cbr\u003e\u003cbr\u003e\n\nAs a general rule, approximately half to two thirds full gives the best results. If you find the speakers are lacking high end detail and sounding dull at the lower end that usually means you have overfilled the stands and will need to reduce the volume of Atabites in each stand.\u003cbr\u003e\u003cbr\u003e\n\n If the speakers are new, it is suggested that the exact amount of Atabites needed will best be determined once they are run in. Refer to your speaker instructions or contact the supplying retailer\/ manufacturer for guidelines on running in recommendations. ","brand":"Atacama Audio","offers":[{"title":"Satin Black (pair)","offer_id":57407442354508,"sku":"ATACAMASLx500IB","price":149.99,"currency_code":"GBP","in_stock":true},{"title":"Silver Metallic (pair)","offer_id":57416257896780,"sku":"ATACAMASLX500S","price":166.66,"currency_code":"GBP","in_stock":true},{"title":"Diamond White (pair)","offer_id":57416257995084,"sku":"ATACAMASLX500W","price":166.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Atacama-SLX-500-Black.jpg?v=1777457262"},{"product_id":"atacama-slx-600-speaker-stands","title":"Atacama SLX 600 Speaker Stands","description":"SLX 600 Speaker Stands \u003cbr\u003e\u003cbr\u003e\n\nThe SLX Series is our professional range of speaker stands available in a wide range of height options and caters for when a larger top plate is required.\u003cbr\u003e\u003cbr\u003e\n\nSLX Series are supplied in a Satin Black paint finish with Silver Metallic or Diamond White as a cost option.\u003cbr\u003e\u003cbr\u003e\n\n\n\nEach pair of SLX stands include new 5mm thick laser cut carbon steel base plates, eight BZP 8mm adjustable floor spikes featuring stainless steel detailed top caps and upgraded High Load Trapezoidal (HLT) Isolation Gel Pads for the top plates.\u003cbr\u003e\u003cbr\u003e\n\nWe recommend that each pair are mass loaded with Atabites in order to maximize their sonic potential (see below for quantity guidance and recommendations on the amount of mass filler to use).\u003cbr\u003e\u003cbr\u003e\n\nFloor spikes and HLT Isolation Gel pads are included with each pair of stands, with the option of adding Atabite mass loading filler, top spikes and spike shoes if required.\u003cbr\u003e\u003cbr\u003e\n\nAs these speaker stands use isolation spikes, two sets of four Atacama HD-S (Nickel finish) spike shoes are recommended to protect delicate floor coverings.\u003cbr\u003e\u003cbr\u003e\n\nSingle stands can be supplied if required; please contact your local Atacama stockist or the Atacama sales department on 01455 283251 for pricing and availability (UK only).\u003cbr\u003e\u003cbr\u003e\n\nSLX speaker stands are designed and manufactured in the UK.\u003cbr\u003e\u003cbr\u003e\n\nDimensions:-\u003cbr\u003e\n\nOverall Height (Including HLT Gel Pads and Floor Spikes)  645mm   (25.4”)\u003cbr\u003e\n\nTop Plate Dimensions\n\nWidth 225mm (8.9”), Depth 225mm (8.9”)\u003cbr\u003e\n\nBase Plate Dimensions\n\nWidth 305mm (12”), Depth 305mm (12”)\u003cbr\u003e\n\nWeight Capacity 15KG per stand.\n\nNote- Supported speaker width\/depth dimensions should not exceed speaker stand base plate dimensions.\u003cbr\u003e\u003cbr\u003e\n\n \n\nAtabite quantity recommendation\u003cbr\u003e\n\nBelow are stated the recommended number of tubes to share between each pair of speaker stands. All vertical poles should be equally filled. Amounts are approximate and will not necessarily completely fill the tubes. It is suggested that you experiment with the exact amount to achieve the best sonic results for your particular system setup as the speakers, room acoustics, cable loom, positioning of the speakers and hifi components will determine how much Atabite filler to use to get the best sound from your speakers.\u003cbr\u003e\u003cbr\u003e\n\nAs a general rule, approximately half to two thirds full gives the best results. If you find the speakers are lacking high end detail and sounding dull at the lower end that usually means you have overfilled the stands and will need to reduce the volume of Atabites in each stand.\u003cbr\u003e\u003cbr\u003e\n\n If the speakers are new, it is suggested that the exact amount of Atabites needed will best be determined once they are run in. Refer to your speaker instructions or contact the supplying retailer\/ manufacturer for guidelines on running in recommendations. \u003cbr\u003e\u003cbr\u003e\n\nSLX 600     5 Tubes","brand":"Atacama Audio","offers":[{"title":"Satin Black (pair)","offer_id":57407442649420,"sku":"ATACAMASLX600B","price":158.32,"currency_code":"GBP","in_stock":true},{"title":"Silver Metallic (pair)","offer_id":57416259502412,"sku":"ATACAMASLX600S","price":174.99,"currency_code":"GBP","in_stock":true},{"title":"Diamond White (pair)","offer_id":57416259535180,"sku":"ATACAMASLX600W","price":174.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Atacama-SLX-600-Black.jpg?v=1777457265"},{"product_id":"atacama-slx-700-speaker-stands","title":"Atacama SLX 700 Speaker Stands","description":"SLX 700 Speaker Stands \u003cbr\u003e\u003cbr\u003e\n\nThe SLX Series is our professional range of speaker stands available in a wide range of height options and caters for when a larger top plate is required.\u003cbr\u003e\u003cbr\u003e\n\nSLX Series are supplied in a Satin Black paint finish with Silver Metallic or Diamond White as a cost option.\u003cbr\u003e\u003cbr\u003e\n\n\n\nEach pair of SLX stands include new 5mm thick laser cut carbon steel base plates, eight BZP 8mm adjustable floor spikes featuring stainless steel detailed top caps and upgraded High Load Trapezoidal (HLT) Isolation Gel Pads for the top plates.\u003cbr\u003e\u003cbr\u003e\n\nWe recommend that each pair are mass loaded with Atabites in order to maximize their sonic potential (see below for quantity guidance and recommendations on the amount of mass filler to use).\u003cbr\u003e\u003cbr\u003e\n\nFloor spikes and HLT Isolation Gel pads are included with each pair of stands, with the option of adding Atabite mass loading filler, top spikes and spike shoes if required.\u003cbr\u003e\u003cbr\u003e\n\nAs these speaker stands use isolation spikes, two sets of four Atacama HD-S (Nickel finish) spike shoes are recommended to protect delicate floor coverings.\u003cbr\u003e\u003cbr\u003e\n\nSingle stands can be supplied if required; please contact your local Atacama stockist or the Atacama sales department on 01455 283251 for pricing and availability (UK only).\u003cbr\u003e\u003cbr\u003e\n\nSLX speaker stands are designed and manufactured in the UK.\u003cbr\u003e\u003cbr\u003e\n\nDimensions:-\u003cbr\u003e\n\n\nWidth 225mm (8.9”), Depth 225mm (8.9”)\u003cbr\u003e\n\nBase Plate Dimensions\n\nWidth 305mm (12”), Depth 305mm (12”)\u003cbr\u003e\n\nWeight Capacity 15KG per stand.\u003cbr\u003e\n\nNote- Supported speaker width\/depth dimensions should not exceed speaker stand base plate dimensions.\u003cbr\u003e\u003cbr\u003e\n\n \n\nAtabite quantity recommendation\u003cbr\u003e\n\nBelow are stated the recommended number of tubes to share between each pair of speaker stands. All vertical poles should be equally filled. Amounts are approximate and will not necessarily completely fill the tubes. It is suggested that you experiment with the exact amount to achieve the best sonic results for your particular system setup as the speakers, room acoustics, cable loom, positioning of the speakers and hifi components will determine how much Atabite filler to use to get the best sound from your speakers.\u003cbr\u003e\u003cbr\u003e\n\nAs a general rule, approximately half to two thirds full gives the best results. If you find the speakers are lacking high end detail and sounding dull at the lower end that usually means you have overfilled the stands and will need to reduce the volume of Atabites in each stand.\u003cbr\u003e\u003cbr\u003e\n\n If the speakers are new, it is suggested that the exact amount of Atabites needed will best be determined once they are run in. Refer to your speaker instructions or contact the supplying retailer\/ manufacturer for guidelines on running in recommendations. ","brand":"Atacama Audio","offers":[{"title":"Satin Black (pair)","offer_id":57407442682188,"sku":"ATACAMASLX700","price":166.66,"currency_code":"GBP","in_stock":true},{"title":"Silver Metallic (pair)","offer_id":57416260354380,"sku":"ATACAMASLX700-S","price":183.32,"currency_code":"GBP","in_stock":true},{"title":"Diamond White (pair)","offer_id":57416260419916,"sku":"ATACAMASLX700W","price":183.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Atacama-SLX-700-Black.jpg?v=1777457269"},{"product_id":"atacama-top-spikes-for-speaker-stands","title":"Atacama Top Spikes For Speaker Stands","description":"All speaker stands are supplied with adjustable spiked feet. Top spikes are available as a cost option. \u003cbr\u003e\u003cbr\u003e\n\nPlease note that top spikes are not available for Nexus speaker stands. \u003cbr\u003e\n\n","brand":"Atacama Audio","offers":[{"title":"Default Title","offer_id":57408996737356,"sku":"ATACAMATOPSPIKES","price":9.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/atacama_top_spikes.jpg?v=1777476413"},{"product_id":"atacama-solid-brass-isolation-cones-25mm-set-of-4","title":"Atacama Solid Brass Isolation Cones 25mm (Set of 4)","description":"Designed to isolate and detatch your AV\/Hifi equipment from its surroundings, these solid brass precision made cones with matching cups are fully adjustable and are prefitted with a dampening foam material to protect and sonically dampen the hifi seperates outer case.\u003cbr\u003e\u003cbr\u003e\n\nDimensions of eack cone when in position. width 25mm, height 40mm.\n","brand":"Atacama Audio","offers":[{"title":"Default Title","offer_id":57409386742092,"sku":"ATACAMAISOLATIONCONESSET4","price":116.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Atacama-Solid-Brass-Isolation-Cones.jpg?v=1777484435"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/collections\/atacama_logo.jpg?v=1777392603","url":"https:\/\/www.stoneaudio.co.uk\/collections\/atacama-audio.oembed","provider":"Stone Audio","version":"1.0","type":"link"}