{"title":"Mark Levinson","description":"Over forty years ago, Mark Levinson embarked on a mission: to perfectly reproduce original recordings that sound exactly as the artists intended during their initial performances. For those with meticulous and exacting standards, there’s no better way to experience music.\u003cbr\u003e\u003cbr\u003eAs any true audiophile will attest, the Mark Levinson name is synonymous with audio purity. So when they design a piece of equipment, perfection isn’t the goal but the starting point.\u003cbr\u003e\u003cbr\u003eTheir engineers spare no expense sourcing the best materials from around the world, and they only release new products when they exceed all expectations. That’s why the whole industry looks to Mark Levinson to raise the bar and then set it again.","products":[{"product_id":"mark-levinson-no-535h-power-amplifier","title":"Mark Levinson No 535H Power Amplifier","description":"As the first five-channel amplifier from Mark Levinson, the Nº535H sets the bar high. Using a semimono-block design like the Nº533H, the Nº535H can deliver 200W per channel into all five channels simultaneously. Twelve output transistors and large amounts of capacitance per channel ensure that this amplifier is more than capable of delivering realistic dynamics and transients with audiophile-grade detail and response for even the most demanding audio tracks.\u003cbr\u003e\u003cbr\u003e\n\n The four amplifiers in the No500H Series are the definition of truly outstanding performance in their respective categories. Drawing from the Mark Levinson heritage, while utilizing a new, straightforward, balanced, current-feedback design creates a new series of amplifiers that must be listened to in order to be fully appreciated. The final result is impressive even for the Mark Levinson high standard of excellence.\u003cbr\u003e\u003cbr\u003e\n\nSpecifications:- \u003cbr\u003e\n\n\n\nCommunication and Control:\n\n\none Ethernet 10Base-T port; one 3.5mm mono (tip\/sleeve) mini plug trigger input, 3-12Vdc; one 3.5mm mono (tip\/sleeve) mini plug trigger output, 3-12Vdc; 3-pin IEC standard power connector\u003cbr\u003e\n \n\n\nFrequency Response:\n\n\nwithin 0.5dB from 10Hz to 20kHz\u003cbr\u003e\n \n\n\nInputs:\n\n\nFive balanced XLR inputs; five unbalanced RCA inputs\u003cbr\u003e\n \n\n\nInput Impedance:\n\n\n60 kΩ (balanced); 30 kΩ (unbalanced)\u003cbr\u003e\n \n\n\nInput Sensitivity :\n\n\n2.83Vrms output at 130mVrms input\u003cbr\u003e\n \n\n\nRated Output Power into 8 ohms:\n\n\n200W\/ch (20Hz to 20kHz at  \u003cbr\u003e\n \n\n\nSignal-to-Noise Ratio:\n\n\nGreater than 85dB, reference level: 2.83 Vrms\n \n\n\nGain:\n\n\n26.8dB\u003cbr\u003e\n \n\n\nPower Requirements: \n\n\n100V~, 120V~, 230V~, factory set for destination country\u003cbr\u003e\n \n\n\nSpeaker Connections:\n\n\u003cbr\u003e\nfive pairs loudspeaker outputs with banana-plug sockets (banana-plug socket not available on the 230 VAC models)\n \n\n\nHeight:\n\n\n(with feet): 7.65\" (19.4cm); (without feet): 6.97\" (17.7cm)\u003cbr\u003e\n \n\n\nWidth:\n\n\n17.75\" (45.1cm)\u003cbr\u003e\n \n\n\nDepth:\n\n\n19.83\" (50.4cm)\u003cbr\u003e\n \n\n\nWeight:\n\n\nNet weight: 98.5 lbs (44.7kg); Shipping weight: 108.5 lbs (49.2kg)\u003cbr\u003e\n \n\n\nPower Consumption:\n\n\n1000W\n\n\n \n","brand":"Mark Levinson","offers":[{"title":"Default Title","offer_id":57409665040716,"sku":"MARKLEVINSONNO535H","price":10625.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Mark-Levinson-No-535H-amp.jpg?v=1777490577"},{"product_id":"mark-levinson-no-532h-high-current-dual-monaural-power-amplifier","title":"Mark Levinson No 532H High Current Dual Monaural Power Amplifier","description":"The Nº531H and Nº532H are both true mono-block designs with independent power supplies for each channel and are rated at 300W per channel into 8 ohms. The transformers and power supply designs deliver unsurpassed dynamics and transient responses for today’s demanding audio formats and provide stability with even the most difficult to drive loudspeakers. Fully differential circuitry ensures that balanced input signals stay that way throughout the signal path and traditional Mark Levinson “Hurricane” binding posts offer secure termination to the loudspeaker.\u003cbr\u003e\u003cbr\u003e\n\n The four amplifiers in the No500H Series are the definition of truly outstanding performance in their respective categories. Drawing from the Mark Levinson heritage, while utilizing a new, straightforward, balanced, current-feedback design creates a new series of amplifiers that must be listened to in order to be fully appreciated. The final result is impressive even for the Mark Levinson high standard of excellence.\u003cbr\u003e\u003cbr\u003e\n\n\nSpecifications:- \u003cbr\u003e\n\n\n\nFrequency Response:\n\n\nwithin 0.5dB from 10Hz to 20kHz\u003cbr\u003e\n \n\n\nInputs:\n\n\none balanced XLR input per channel; one unbalanced RCA input per channel\u003cbr\u003e\n \n\n\nInput Impedance:\n\n\n 60 kΩ (balanced); 30 kΩ (unbalanced)\u003cbr\u003e\n \n\n\nInput Sensitivity :\n\n\n2.83Vrms output at 130mVrms input\u003cbr\u003e\n \n\n\nRated Output Power into 8 ohms:\n\n\n300W\/ch (20Hz to 20kHz at\u003cbr\u003e \n \n\n\nSignal-to-Noise Ratio:\n\n\nGreater than 85dB, reference level: 2.83 Vrms\u003cbr\u003e\n \n\n\nGain:\n\n\n26.8dB\u003cbr\u003e\n \n\n\nPower Requirements:\n\n\n100V~, 120V~, 230V~, factory set for destination country;\u003cbr\u003e\n \n\n\nSpeaker Connections:\n\n\none pair “Hurricane” loudspeaker outputs with banana-plug sockets per channel \u003cbr\u003e\n \n\n\nHeight:\n\n\n(with feet): 7.65\" (19.4cm); (without feet): 6.97\" (17.7cm)\u003cbr\u003e\n \n\n\nWidth:\n\n\n17.75\" (45.1cm)\u003cbr\u003e\n \n\n\nDepth:\n\n\n19.83\" (50.4cm)\u003cbr\u003e\n \n\n\nWeight:\n\n\nNet Weight: 74.0 lbs (33.6kg); Shipping weight: 84.0 lbs (38.1kg)\u003cbr\u003e\n \n\n\nPower Consumption:\n\n\n600W\n\n\n\n","brand":"Mark Levinson","offers":[{"title":"Default Title","offer_id":57409665597772,"sku":"MARKLEVINSONNO532H","price":7082.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Mark-Levinson-No-532H-FRONT.jpg?v=1777490591"},{"product_id":"mark-levinson-no-533h-high-current-3-channel-power-amplifier","title":"Mark Levinson No 533H High Current 3 Channel Power Amplifier","description":"The Nº533H shares the same basic amplifier module as the Nº531H and Nº532H but is a semi-monoblock design. With power supplies that can be shared across multiple channels, this design lends itself well to multi-channel environments where one channel might need more power at times than others. All other features of the Nº533H are identical to the Nº531H and Nº532H and the common design creates a consistent sonic signature for use in multiple amplifier system configurations.\u003cbr\u003e\u003cbr\u003e\n\n The four amplifiers in the No500H Series are the definition of truly outstanding performance in their respective categories. Drawing from the Mark Levinson heritage, while utilizing a new, straightforward, balanced, current-feedback design creates a new series of amplifiers that must be listened to in order to be fully appreciated. The final result is impressive even for the Mark Levinson high standard of excellence. \u003cbr\u003e\u003cbr\u003e\n\nSpecifications:- \u003cbr\u003e\n\n\n\nCommunication and Control:\n\n\none Ethernet 10Base-T port; one 3.5mm mono (tip\/sleeve) mini plug trigger input, 3-12Vdc; one 3.5mm mono (tip\/sleeve) mini plug trigger output, 3-12Vdc; 3-pin IEC standard power connector\u003cbr\u003e\n \n\n\nFrequency Response:\n\n\nwithin 0.5dB from 10Hz to 20kHz\u003cbr\u003e\n \n\n\nInputs:\n\n\ntwo balanced XLR inputs; two unbalanced RCA inputs\u003cbr\u003e\n \n\n\nInput Impedance:\n\n\n 60 kΩ (balanced); 30 kΩ (unbalanced)\u003cbr\u003e\n \n\n\nInput Sensitivity :\n\n\n 2.83Vrms output at 130mVrms input\u003cbr\u003e\n \n\n\nRated Output Power into 8 ohms:\n\n\n300W\/ch (20Hz to 20kHz at \u003cbr\u003e\n \n\n\nSignal-to-Noise Ratio:\n\n\nGreater than 85dB, reference level: 2.83 Vrms\u003cbr\u003e\n \n\n\nGain:\n\n\n26.8dB\u003cbr\u003e\n \n\n\nPower Requirements :\n\n\n100V~, 120V~, 230V~, factory set for destination country;\u003cbr\u003e\n \n\n\nSpeaker Connections:\n\n\n one pair “Hurricane” loudspeaker outputs with banana-plug sockets per channel (banana-plug socket not available on the 230 VAC models)\u003cbr\u003e\n \n\n\nHeight:\n\n\n (with feet): 7.65\" (19.4cm); (without feet): 6.97\" (17.7cm)\u003cbr\u003e\n \n\n\nWidth:\n\n\n17.75\" (45.1cm)\u003cbr\u003e\n \n\n\nDepth:\n\n\n19.83\" (50.4cm)\u003cbr\u003e\n \n\n\nWeight:\n\n\nNet Weight: 90.0 lbs (40.8kg) Shipping weight: 100.0 lbs (45.4kg)\u003cbr\u003e\n \n\n\nPower Consumption:\n\n\n900W\n","brand":"Mark Levinson","offers":[{"title":"Default Title","offer_id":57409665761612,"sku":"MARKLEVINSONNO533H","price":8749.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Mark-Levinson-No-533H.jpg?v=1777490595"},{"product_id":"mark-levinson-no-53-high-current-monaural-power-amplifier","title":"Mark Levinson No 53 High Current Monaural Power Amplifier","description":"\"The Nº53 is the first-ever switching power amplifier from Mark Levinson. Despite their numerous advantages – increased efficiency, more power, compact dimensions, decreased weight and less heat dissipation than their linear counterparts – switching power amplifiers have generally been viewed with skepticism from the audiophile community due to the technical limitations inherent in switching designs and assumptions about the resulting sound quality. The Nº53, however, is the end result of an extensive R \u0026amp; D effort to find ways to emphasize the advantages of switching power amplifiers while overcoming their weaknesses, creating a landmark product truly worthy of the Mark Levinson Reference designation.\u003cbr\u003e\u003cbr\u003e\n\n The Nº53 is rated at an impressive 500 Watts into 8 ohms, measures merely 21\"\" H × 9\"\" W × 21\"\" D and weighs only 135 lbs — certainly playing up the strengths for which switching power amplifiers are known. It is capable of generating phenomenal power levels into virtually any speaker load to support both instantaneous and continuous demands. More impressive still, the Nº53 accomplishes this feat without the slightest change in performance capability while maintaining a constant, thermally balanced operating temperature. Unlike most switching amplifiers, the Nº53 has superbly efficient power management capabilities, so its operating temperature does not change no matter how hard or long the amplifier is driven.\u003cbr\u003e\u003cbr\u003e\n Switching power amplifiers are so named because they switch the output devices on and off in very rapid succession, mimicking the input signal. One set of output devices drives the positive half of the waveform, and a separate set drives the negative half. The result is less power being wasted as heat, because the workload is essentially cut in half. Unfortunately, it also creates some significant design challenges in terms of how to manage the switching noise – the noise created from the output devices constantly turning on and off – as well as a phenomenon called “dead bands.” Traditionally, these have been the two contributing factors to switching power amplifiers’ reputation for inferior sound quality. However, Mark Levinson has raised the bar by breaking through these barriers with the Nº53.\u003cbr\u003e\u003cbr\u003e\n\n The Nº53 removes switching noise without affecting the audio with the introduction of the new patented and proprietary Interleaved Power Technology (IPT) which, among other things, raises the switching frequency of the Nº53 to an extremely high 2MHz. The advantages of this are twofold: First, it pushes the fundamental switching noise and its harmonics far above the limit of human hearing, so that they have no direct affect on sound quality; second, it allows for easier removal of the switching noise from the signal by using much gentler filters, having no negative effect in the crucial audio band. The result is a frequency response that is ruler flat across the entire audio spectrum and is only a few dB down at 100kHz – impressive for any power amplifier, but staggering for a switching design.\u003cbr\u003e\u003cbr\u003e\n\n The Nº53 has also overcome the “dead band” problem. Dead bands are silent gaps in the audio output, created when the output devices driving the positive half of the signal and the negative half of the signal are both turned off. This generally occurs at every “zero crossing point,” whenever the audio waveform crosses over from positive amplitude to negative amplitude or vice versa. This is a constant phenomenon – in a 20kHz audio signal, this point occurs 40,000 times per second. It becomes a problem, however, because even the best output devices are not able to turn on and off instantaneously, so the result is a number of “dead bands” of signal every second. Obviously, the larger the gap, the more detrimental to the audio signal. Many designs minimize dead bands by ensuring that both output devices are off for as brief a period as possible. Unfortunately, this increases the potential for the output devices to be on simultaneously, which can damage or destroy them. The Nº53, on the other hand, was designed using a patented technology that allows both sets of output devices to be on simultaneously for short periods of time, to completely eliminate dead bands without damaging the output devices or reducing their life expectancy. In other words, this solves the dead band problem and maintains the Nº53’s long-term reliability.\u003cbr\u003e\u003cbr\u003e\n\n Power amplifiers’ challenge and goal is to amplify the incoming audio signal without distorting it and effortlessly drive a wide range of loudspeaker impedances at any volume level with the forcefulness and grace that reference-quality sound reproduction demands. The Nº53 is designed toward that end. The chassis is a compact vertical design consisting of three separate internal compartments to provide shielding and isolation of the different circuitry – the power supply in the bottom, the four amplifiers in the middle and the control circuitry in the top. The power supply is completely isolated and shielded from the rest of the amplifier to reduce interference from magnetic fields and high current devices. The extremely low-noise toroidal transformer features an oversized 2.8kVA transformer with four 47,000µF low-ESR capacitors. The middle section’s four amplifiers, featuring a pair of coils each, are arranged symmetrically and mirror-imaged to maintain separation. Working together, the four amplifiers raise the effective switching frequency from 500kHz to 2MHz to produce the best sound quality known from a switching amplifier. The control circuitry has its own independent regulated power supply and is shielded from the rest of the amplifier to keep it from interfering with the audio circuits.\"\u003cbr\u003e\u003cbr\u003e\n\nSpecifications:- \u003cbr\u003e\n\n\n\nCommunication and Control:\n\n\nTwo Link2 ports (one input and one output); One Ethernet port; One 3.5mm mono (tip\/sleeve) mini plug trigger input, 3-12Vdc; One 3.5mm mono (tip\/sleeve) mini plug trigger output, 3-12Vdc; 3-Pin IEC standard power connector\u003cbr\u003e\n \n\n\nFrequency Response:\n\n\nWithin ±0.1dB from 10Hz to 20kHz\u003cbr\u003e\n \n\n\nInputs:\n\n\nOne balanced XLR input; One unbalanced RCA input\u003cbr\u003e\n \n\n\nInput Impedance:\n\n\n100 kΩ (balanced); 50 kΩ (unbalanced)\u003cbr\u003e\n \n\n\nRated Output Power into 4 ohms:\n\n\n1000W\u003cbr\u003e\n \n\n\nRated Output Power into 8 ohms:\n\n\n 500W\u003cbr\u003e\n \n\n\nGain:\n\n\n26.8dB\u003cbr\u003e\n \n\n\nPower Requirements: \n\n\n100V~, 120V~, 230V~, 640W, factory-set for destination country\u003cbr\u003e\n \n\n\nSpeaker Connections:\n\n\nTwo pairs of \"Hurricane\" loudspeaker output binding posts with banana-plug sockets (banana-plug socket not available for some models)\u003cbr\u003e\n \n\n\nHeight:\n\n\n20.87 in (530mm)\u003cbr\u003e\n \n\n\nWidth:\n\n\n 8.42 in (214mm)\u003cbr\u003e\n \n\n\nDepth:\n\n\n20.4 in (518mm)\u003cbr\u003e\n \n\n\nWeight:\n\n\nNet weight: 135 lb (61.3kg); Shipping weight: 165 lb (75kg)\n","brand":"Mark Levinson","offers":[{"title":"Default Title","offer_id":57409666154828,"sku":"MARKLEVINSONNO53","price":21666.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Mark-Levinson-No-53-power-amp.jpg?v=1777490605"},{"product_id":"mark-levinson-no-519-reference-source","title":"Mark Levinson No 519 Reference Source","description":"Highlights:-\u003cbr\u003e\u003cbr\u003e\n\n\n•Pure Path discrete, direct coupled, fully balanced, dual-monaural signal path\u003cbr\u003e\n•Plays up to 32-bit, 192kHz PCM, double-speed DSD, CD, and virtually all two-channel formats\u003cbr\u003e\n•Six high-resolution digital inputs: balanced, coaxial, optical, and USB asynchronous\u003cbr\u003e\n\n•Plays from networked drives and devices, streaming services, Bluetooth, and connected media\u003cbr\u003e\n•Spotify, Tidal, Qobuz, Deezer, Rhapsody\/Napster, QQ, internet radio, and podcasts built in*\u003cbr\u003e \n•Analog output volume control for direct connection to amplifiers or active loudspeakers\u003cbr\u003e\n\n•32-bit Precision Link DAC with three selectable filters and seven power supplies\u003cbr\u003e\n•Class-A Main Drive Headphone output for up to 32-ohm headphones using main circuit\u003cbr\u003e\n•Designed and handcrafted in the USA\u003cbr\u003e\u003cbr\u003e\n\n\n\n\nTechnical Specifications:-\u003cbr\u003e\n\nDAC output voltage @ full scale (0dBFS) - 3.7VRMS\u003cbr\u003e\n\n\n\nDAC frequency response - 20Hz to 20kHz, +0 \/ ¬–0.2dB\u003cbr\u003e\n\n\n\nDAC THD, full scale (0dBFS) - \u0026lt; 0.0001% @ 1kHz, \u0026lt; 0.0003% @ 20kHz\u003cbr\u003e\n\n\n\nDAC SNR (referred to 3.7VRMS \/ 0dBFS output) - \u0026gt; 120dB (A-weighted)\u003cbr\u003e\n\n\n\nPCM sample rates\/bit depth - 32, 44.1, 48, 88.2, 96, 176.4, or 192kHz; up to 32 bits\u003cbr\u003e\n\n\n\nDSD - Native or DoP (DSD over PCM), single- and double-speed (2.8 and 5.6MHz)\u003cbr\u003e\n\n\n\nProcessor - 1GHz ARM Cortex A8 Sitara\u003cbr\u003e\n\n\n\nMemory - 4GB RAM and 4GB Flash\u003cbr\u003e\n\n\n\nDigital inputs - 1 balanced (XLR); 2 coaxial (RCA); 2 optical (Toslink); 1 USB-B asynchronous\u003cbr\u003e\n\n\n\nMass storage connectors - 2 USB type A\u003cbr\u003e\n\n\n\nAnalog outputs - 1 balanced (XLR); 1 pair single-ended (RCA), 1 headphone (¼”, 6.3mm TS)\u003cbr\u003e\n\n\n\nDigital outputs - 1 balanced (XLR); 1 single-ended (RCA), 1 optical (Toslink)\u003cbr\u003e\n\n\n\nControl connectors - Ethernet (RJ45), RS-232 (RJ12), Trigger In and Out, IR In, USB-A, Mini USB\u003cbr\u003e\n\n\n\nNetwork - Ethernet, Wi-Fi 802.11b\/g\/n\u003cbr\u003e\n\n\n\nMains voltage - 100VAC, 115VAC, or 230VAC, factory set\u003cbr\u003e\n\n\n\nSoftware update - Network, USB\u003cbr\u003e\n\n\n\nControl apps - iOS, Android, web browser\n","brand":"Mark Levinson","offers":[{"title":"Default Title","offer_id":57413098996044,"sku":"MARKLEVINSONNO519","price":16666.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Mark-Levinson-No-519.jpg?v=1777539444"},{"product_id":"mark-levinson-no-52-reference-pre-amplifier","title":"Mark Levinson No 52 Reference Pre Amplifier","description":"The Nº52 is unquestionably the finest Mark Levinson preamplifier ever. This dual-monaural preamplifier isolates the critical analog audio circuitry from the control section with a two-chassis approach to provide the purest signal paths possible. \u003cbr\u003e\u003cbr\u003e\n\nHIGHLIGHTS:-\u003cbr\u003e\n•Two-piece chassis with separate control box and analog box\u003cbr\u003e\n•7 Analog inputs: 3 XLR and 4 RCA stereo input pairs\u003cbr\u003e\n\n•Dual Monaural construction and signal paths\/routing\u003cbr\u003e\n•Phono input with support for both MM and MC cartridges\u003cbr\u003e\n\n•AC regeneration circuitry\u003cbr\u003e\n•Rear-panel USB (A) connector for software updates\u003cbr\u003e\u003cbr\u003e\n\n\"The Nº52 features seven analog inputs – three balanced XLR and four unbalanced RCA – as well as a dedicated phono input configurable for moving-magnet (MM) or moving-coil (MC) operation. Two sets of pre-outs are duplicated in both XLR and RCA jacks, while an additional auxiliary pair of XLR and RCA outputs is configurable, for fixed or variable output with independent source selection. This function allows the auxiliary output to function as a third pre-out, a pass-through full-range subwoofer output or a record output.\u003cbr\u003e\u003cbr\u003e\n\n The Nº52 comes with a unity-gain SSP mode that integrates the connected sources into a home theater system while still maintaining optimal and independent stereo operation for music. System controls include Ethernet, Mark Levinson’s proprietary ML Net, and 12V trigger and IR control ports, as well as a USB connector that can facilitate software updates. Additionally, the included remote control also operates both the Nº52 and other connected Mark Levinson components.\u003cbr\u003e\u003cbr\u003e\n\n The peerless craftsmanship of Mark Levinson is evident in every aspect of the Nº52. Within the control section, mirror-imaged DC power supplies and AC regeneration circuitry optimize power for the cleanest, most stable signals possible. Individual DC power cords supply power to the audio section in the second chassis to prevent extraneous noise from passing into the DC power signals, while communication and control signals are sent along a dedicated third cable to the audio section. The audio chassis is also configured in a mirror-image, left\/right design with isolated, independent PCBs for volume control and for main and auxiliary signal paths. The communication signals are contained in a shielded central compartment, as is each channel of the phono input. Heavy aluminum extrusions and thick aluminum plates solidify the chassis and provide an optimized foundation for the audio circuitry.\"\u003cbr\u003e\u003cbr\u003e\n\nTECHNICAL SPECIFICATION:-\u003cbr\u003e\u003cbr\u003e\n\nPhono Inputs:\nInput Overload (phono): \u0026gt;100mV @1kHz (40dB gain); \u0026gt;10mV @1kHz (60dB gain)\u003cbr\u003e\n \n\n\nCommunication and Control:\nVolume Control Range: 80.0dB\u003cbr\u003e\n \n\n\nFrequency Response:\n10Hz – 40kHz (±0.2dB)\u003cbr\u003e\n \n\n\nFrequency Response (phono):\n±1dB (RIAA response)\u003cbr\u003e\n \n\n\nInput Impedance:\nInput Impedance (line-level): 100k ohms -- Input Impedance (phono): Resistive: 3.3Ω, 5.0Ω, 7.7Ω, 10Ω, 33Ω, 50Ω, 77Ω, 100Ω, 330Ω, 47kΩ, (user-selectable) Capacitive: 50pF, 100pF, 150pF, 200pF, 250pF, 300pF, 350pF, 0.01μF (user-selectable)\u003cbr\u003e\n \n\n\nAnalog Audio Inputs:\n3 balanced (female XLR) stereo inputs; 4 single-ended (Mark Levinson-RCA) stereo inputs\u003cbr\u003e\n \n\n\nAnalog Audio Outputs:\n1 balanced (male XLR) stereo main output; 1 single-ended (Mark Levinson-RCA) stereo main output; 2 single-ended (Mark Levinson-RCA) stereo record outputs\u003cbr\u003e\n \n\n\nMaximum output level:\n16V – balanced (XLR) connectors; 8V – unbalanced (RCA) connectors\u003cbr\u003e\n \n\n\nSignal-to-Noise Ratio:\nResidual Noise: \u0026lt; 120dB (20Hz – 20kHz, input terminated,balanced)\u003cbr\u003e\n \n\n\nGain:\nGain (line-level stage): 0dB, +6dB, +12dB, or +18dB (user-selectable) -- Gain (phono stage): +40dB, +60dB @1kHz (user-selectable) -- Gain Resolution: 1.0dB increments up to 23.0dB on display (–57dB to –80dB); 0.1dB increments above 23.0dB on display (0dB to –57dB)\u003cbr\u003e\n \n\n\nOutput impedance:\n20 ohms – balanced (XLR) connectors; 10 ohms – unbalanced (RCA) connectors\u003cbr\u003e\n \n\n\nPower Requirements: \nOperating Voltage: 100V – 240VAC, 50Hz\/60Hz\u003cbr\u003e\n \n\n\nWeight:\n60 lb (27 kg) Control = 25 lb (11 kg); Audio = 35 lb (16 kg)\u003cbr\u003e\n \n\n\nDepth:\n13\" (33 cm)\u003cbr\u003e\n \n\n\nWidth:\n17.25\" (43.8 cm)\u003cbr\u003e\n \n\n\nHeight:\n8.75\" (22.2 cm) - Control = 3.25\" (8.2 cm); Audio = 5.5\" (14 cm) \n","brand":"Mark Levinson","offers":[{"title":"Default Title","offer_id":57413105287500,"sku":"MARKLEVINSONNO52","price":26250.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Mark-Levinson-No-52.jpg?v=1777539458"},{"product_id":"mark-levinson-no-526-dual-monaural-pre-amplifier","title":"Mark Levinson No 526 Dual-Monaural Pre Amplifier","description":"№ 526\u003cbr\u003e\u003cbr\u003e\n\nThe Mark Levinson № 526 is the definitive preamplifier for today’s music lover. Twelve analog, phono, and digital inputs travel through the Mark Levinson proprietary Pure Path discrete, direct-coupled, fully balanced, dual-monaural signal path for breathtaking purity and performance. With precision control and processing including a discrete, balanced R-2R Ladder volume control, the acclaimed 32-bit Precision Link DAC, class-A Pure Phono stage, and HARMAN Clari-Fi® music restoration technology, the № 526 preamplifier delivers an uncompromising performance regardless of source. Housed in a 6000-series aluminum chassis, like all Mark Levinson equipment, the № 526 is designed and handcrafted in the USA.\u003cbr\u003e\u003cbr\u003e\n\nThe № 526 offers five line-level analog inputs: two balanced (XLR), three single-ended (RCA), in addition to the Pure Phono (RCA with grounding pin) input. The preamplifier delivers its signal to balanced (XLR) and single-ended (RCA) stereo outputs, as well as a 1\/4-inch (6.3mm) Main Drive Headphone output integrated into the front panel metalwork – a first for Mark Levinson.\u003cbr\u003e\u003cbr\u003e\n\nThe Main Drive Headphone amplifier circuit drives up to 32-ohm headphones in class A by employing the main output circuit rather than a secondary signal path: a perfect example of reducing clutter in the circuit design.\u003cbr\u003e\u003cbr\u003e\n\nA selectable fourth-order, 80 Hz high-pass filter enables seamless integration of a single or dual subwoofers for full-range performance with a wide range of loudspeaker setups. The preamplifier features a unity-gain SSP mode that integrates the connected sources into a home theater system while still maintaining optimal and independent stereo operation for music.\u003cbr\u003e\u003cbr\u003e\n\nSystem-integration connectivity includes Ethernet\/IP control, RS-232, USB for monitoring and configuration via web page, plus 12V triggers and an IR input. An included machined metal remote delivers the robust feel and precise control befitting of a component of the preamplifier’s caliber.\u003cbr\u003e\u003cbr\u003e\n\nDesigned and Handcrafted in the USA\u003cbr\u003e\u003cbr\u003e\n\nLike all Mark Levinson equipment, the № 526 is proudly designed and handcrafted in the USA. A dedicated Engineering Center of Excellence in Shelton, CT houses Mark Levinson engineering and product development, just a state away from small-batch production at Mack Technologies in Westford, MA by a team of craftsmen who bring all Mark Levinson equipment to life.\u003cbr\u003e\u003cbr\u003e\n\nTechnical Specifications:- \u003cbr\u003e\u003cbr\u003e\n\nMains voltage:\n100VAC, 115VAC, or 230VAC, factory set\u003cbr\u003e\n\nPower consumption:\n0.4W Green Standby, 5W Power Save, 72W Normal Standby, 75W On, idle\u003cbr\u003e\n\nDimension:\u003cbr\u003e\nHeight (with feet): 3.75” (10.2cm)\u003cbr\u003e\nHeight (without feet): 3.25” (8.9cm)\u003cbr\u003e\nWidth: 17.25” (43.8cm)\u003cbr\u003e\nDepth: 18” (45.7cm)\u003cbr\u003e\u003cbr\u003e\n\nWeight:\u003cbr\u003e\nNet weight: 41 lbs (17.7kg)\u003cbr\u003e\nShipping weight: 60 lbs (26.3kg)\n","brand":"Mark Levinson","offers":[{"title":"Default Title","offer_id":57413107056972,"sku":"MARKLEVINSONNO526","price":17500.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Mark-Levinson-No-526.jpg?v=1777539463"},{"product_id":"mark-levinson-no-523-dual-monaural-pre-amplifier","title":"Mark Levinson No 523 Dual-Monaural Pre Amplifier","description":"№ 523\u003cbr\u003e\u003cbr\u003e\n\n\nThe Mark Levinson № 523 is the definitive preamplifier for the analog music lover. Six line-level analog and phono inputs travel through the Mark Levinson proprietary Pure Path discrete, direct-coupled, fully balanced, dual-monaural signal path for breathtaking purity and performance. With precision control including a discrete, balanced R-2R Ladder volume control, class-A Pure Phono stage, and class-A Main Drive Headphone output, the № 523 preamplifier delivers an uncompromising performance regardless of analog source. Housed in a 6000-series aluminum chassis, like all Mark Levinson equipment, the № 523 is designed and handcrafted in the USA.\u003cbr\u003e\u003cbr\u003e\n\nThe № 523 offers five line-level analog inputs: two balanced (XLR), three single-ended (RCA), in addition to the Pure Phono (RCA with grounding pin) input. The preamplifier delivers its signal to balanced (XLR) and single-ended (RCA) stereo outputs, as well as a 1\/4-inch (6.3mm) Main Drive Headphone output integrated into the front panel metalwork – a first for Mark Levinson.\u003cbr\u003e\u003cbr\u003e\n\nThe Main Drive Headphone amplifier circuit drives up to 32-ohm headphones in class A by employing the main output circuit rather than a secondary signal path: a perfect example of reducing clutter in the circuit design.\u003cbr\u003e\u003cbr\u003e\n\nA selectable fourth-order, 80 Hz high-pass filter enables seamless integration of a single or dual subwoofers for full-range performance with a wide range of loudspeaker setups.\u003cbr\u003e\u003cbr\u003e\n\nSystem-integration connectivity includes Ethernet\/IP control, RS-232, USB for monitoring and configuration via web page, plus 12V triggers and an IR input. An included machined metal remote delivers the robust feel and precise control befitting of a component of the preamplifier’s caliber.\u003cbr\u003e\u003cbr\u003e\n\nDesigned and Handcrafted in the USA\u003cbr\u003e\u003cbr\u003e\n\nLike all Mark Levinson equipment, the № 523 is proudly designed and handcrafted in the USA. A dedicated Engineering Center of Excellence in Shelton, CT houses Mark Levinson engineering and product development, just a state away from small-batch production at Mack Technologies in Westford, MA by a team of craftsmen who bring all Mark Levinson equipment to life.\u003cbr\u003e\u003cbr\u003e\n\nTechnical Specifications:-\u003cbr\u003e\u003cbr\u003e\n\nPower consumption:\n0.4W Green Standby, 5W Power Save, 67W Normal Standby, 70W On, idle\u003cbr\u003e\n\nDimensions:\u003cbr\u003e\nHeight (with feet): 3.75” (10.2cm)\u003cbr\u003e\nHeight (without feet): 3.25” (8.9cm)\u003cbr\u003e\nWidth: 17.25” (43.8cm)\u003cbr\u003e\nDepth: 18” (45.7cm)\u003cbr\u003e\u003cbr\u003e\n\nWeight:\u003cbr\u003e\nNet weight: 39 lbs (17.7kg)\u003cbr\u003e\nShipping weight: 58 lbs (26.3kg)\n\n\n\n\n\n\n","brand":"Mark Levinson","offers":[{"title":"Default Title","offer_id":57413108629836,"sku":"MARKLEVINSONNO523","price":13333.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Mark-Levinson-523.jpg?v=1777539467"},{"product_id":"mark-levinson-no-536-monaural-power-amplifier","title":"Mark Levinson No 536 Monaural Power Amplifier","description":"Nº536\u003cbr\u003e\u003cbr\u003e\n\n\n\n\nThe pursuit of perfect amplification is a well-known theme in high-end audio. New technologies present new approaches, while looking to the past provides inspiration for the future. It was in that spirit that the Mark Levinson® № 536 amplifier was developed: a design advised by the traditions and art of classic Mark Levinson amplifier designs, and with a specific target sound: a deep, expansive soundstage, accurate image placement, extended low bass response with good pitch definition, and detailed high frequencies free from “etching.” To that end, the Mark Levinson engineering team started with the following requirements:\u003cbr\u003e\u003cbr\u003e\n\n•Harmonic distortion \u0026lt; 0.02% at 1kHz and \u0026lt; 0.2% at 20kHz\u003cbr\u003e\n•Bandwidth extending from 0.2Hz to 120kHz, and beyond if possible\u003cbr\u003e\n•Critically damped square wave response, with leading and trailing edges free of any slewing artifacts, and a slew rate of at least 100V\/µs\u003cbr\u003e\n•Maximized open-loop linearity and bandwidth, with global negative feedback in the range of 12-20dB and without nested feedback loops\u003cbr\u003e\u003cbr\u003e\n\nThis fully differential, fully discrete, monaural Pure Path amplifier drives virtually any loudspeaker effortlessly for impeccable imaging, musicality, and openness. A direct-coupled signal path; a highly linear, low-feedback design; and voltage gain and drive stages operating in class A, are joined by the modern system integration capabilities provided by Ethernet, RS-232, and USB for monitoring and network control. Housed in a 6000-series aluminum chassis, like all Mark Levinson equipment, the № 536 is designed and handcrafted in the USA.\u003cbr\u003e\u003cbr\u003e\n\nMark Levinson Pure Path Circuit Design\u003cbr\u003e\n\nSince 1972, Mark Levinson has been dedicated to the uncompromising art of sound, with the guiding principle of musical purity above all else. To achieve that goal like never before, Mark Levinson engineers scoured company archives, ultimately developing a circuit-design philosophy called Pure Path. On a conceptual level, its hallmark principles include a discrete, direct-coupled, fully balanced, monaural signal path that delivers unrestricted, uncompromised sonic purity.\u003cbr\u003e\u003cbr\u003e\n\nFar from merely arranging high quality components in an intelligent manner, Pure Path is the meeting of science and art: Mark Levinson engineers are tasked to create the best possible measured AND subjective performance. To quote Albert Einstein: “Everything should be made as simple as possible, but not simpler.”\u003cbr\u003e\u003cbr\u003e\n\nPure Path highlights in the № 536 include Folded Cascodes, an extremely high bias current, and usage of very little negative feedback.\u003cbr\u003e\u003cbr\u003e\n\nThe Folded Cascode\u003cbr\u003e\n\nMark Levinson components are designed around a Pure Path amplifier circuit concept that makes heavy use of a circuit design element called a cascode. Originally created for improving the bandwidth of vacuum tube circuits in radios, Mark Levinson engineers deploy cascodes in Pure Path circuit designs to both improve bandwidth and enhance linearity. A cascode combines two transistors so that they operate as a single composite device that functions like a single transistor, using the wanted characteristics of each component transistor, and rejecting the unwanted characteristics.\u003cbr\u003e\u003cbr\u003e\n\nMark Levinson engineers began their design of the gain stage with pairs of JFETs (junction field-effect transistors), chosen for their low noise and high gain. JFETs achieve these characteristics in part by being large, and with their large size comes nonlinear gain – or distortion. To mitigate this, BJTs (bipolar junction transistors) were added to the circuit. The BJTs exhibit very low input impedance and very high output impedance, which translates to excellent bandwidth and linearity. By creating a cascode of the JFETs and BJTs, they created a design with the best characteristics of both sets of devices.\u003cbr\u003e\u003cbr\u003e\n\nEngineers than connected the output of the cascode to another transistor of the opposite “gender.” Current flows through it in the opposite direction to “turn around” the direction of the signal current. This special connection is called a Folded Cascode and it is a hallmark of the Pure Path circuit: high gain with low noise, wide bandwidth, and excellent linearity.\u003cbr\u003e\u003cbr\u003e\n\nGain Structure\u003cbr\u003e\n\nThe audio circuitry in the № 536 has been optimized for the best possible open-loop performance. As a result, very little negative feedback is necessary, and the amount employed could be adjusted to achieve certain subjective or objective results. The open-loop gain and bandwidth of the circuit were painstakingly set using precision resistors and compensation capacitors, and additional precision resistors were employed to compose the feedback network.\u003cbr\u003e\u003cbr\u003e\n\nMilitary Grade Components\u003cbr\u003e\n\nAll Mark Levinson equipment employs electronic components carefully chosen for their specific task. Gain-stage JFET pairs have high gain, low noise, low distortion, and because they are encapsulated in the same package, the two devices operate under nearly identical conditions. Capacitors used in critical filtering locations are film types, noted for their consistent performance regardless of temperature and frequency. Finally, resistors in critical gain-setting and feedback locations use tantalum nitride thin-film elements. An extremely costly material, tantalum nitride typically finds use in sensitive military equipment because it is unusually stable with respect to temperature, exhibits very low noise, and is unaffected by magnetic fields. In fine audio equipment, those characteristics make the sound even more revealing and effortless, free of the low-level nonlinearities caused by lesser resistive materials as they heat and cool under dynamic conditions. Housed in an aircraft-grade 6063-T5 extruded aluminum chassis, the № 534 features extremely high build precision, to exceedingly low tolerances.\u003cbr\u003e\u003cbr\u003e\n\nCompleting the Signal Path\u003cbr\u003e\n\nThe № 536 offers balanced and single-ended inputs for use with virtually any preamplifier or source player with variable output. For connection to loudspeakers without needing tools for a secure link, the № 536 features two pairs of gold-plated binding posts with Mark Levinson Hurricane terminal knobs to support either standard or bi-wired loudspeaker connections. Speaker cables terminating in banana plugs can be used in the USA and other non-European countries.\u003cbr\u003e\u003cbr\u003e\n\nSystem-integration connectivity includes Ethernet\/IP control, RS-232, USB for monitoring and configuration via web page, plus 12V triggers.\u003cbr\u003e\u003cbr\u003e\n\nDesigned and Handcrafted in the USA\u003cbr\u003e\u003cbr\u003e\n\nLike all Mark Levinson equipment, the № 536 is proudly designed and handcrafted in the USA. A dedicated Engineering Center of Excellence in Shelton, CT houses Mark Levinson engineering and product development, just a state away from small-batch production at Mack Technologies in Westford, MA by a team of craftsmen who bring all Mark Levinson equipment to life.\u003cbr\u003e\u003cbr\u003e\n\nTechnical Specification:- \u003cbr\u003e\n\nInput connectors:\none Balanced, one single-ended\u003cbr\u003e\n\nSpeaker Connectors:\ntwo pairs of Hurricane loudspeaker outputs \nbanana-plug sockets per channel, except on 230 VAC version\u003cbr\u003e\n\nControl I\/O:\nEthernet, RS-232, Trigger In and Out, USB-A, Mini USB\u003cbr\u003e\n\nRated Output Power:\n400 wpc RMS @ 8Ω, 20Hz to 20kHz @ \u0026lt; 0.3% THD, full output from 2.83VRMS\u003cbr\u003e\n\nFrequency Response:\n10Hz to 20kHz ±0.2dB\u003cbr\u003e\n\nSignal-to-Noise Ratio:\n \u0026gt; 85dB, reference level: 2.83 VRMS\u003cbr\u003e\n\nInput Impedance:\n60 kΩ balanced; 30 kΩ unbalanced\u003cbr\u003e\n\nVoltage Gain:\n26dB\u003cbr\u003e\n\nInput Sensitivity:\n2.83VRMS output at 142mVRMS input\u003cbr\u003e\n\nPower Requirements:\n100V~, 120V~, 230V~, factory set for destination country, 1500W\u003cbr\u003e\n\nDimensions:\u003cbr\u003e\nHeight (with feet): 7.75” (19.7cm)\u003cbr\u003e\nHeight (without feet): 7” (17.8cm)\u003cbr\u003e\nWidth: 17.75” (45.1cm)\u003cbr\u003e\nDepth: 20” (50.8cm)\u003cbr\u003e\u003cbr\u003e\n\nWeight:\u003cbr\u003e\nNet weight: 100 lbs (45.4kg)\u003cbr\u003e\nShipping weight: 114 lbs (51.7kg)\n\n","brand":"Mark Levinson","offers":[{"title":"Default Title","offer_id":57413110661452,"sku":"MARKLEVINSONNO536","price":13333.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Mark-Levinson-536.jpg?v=1777539472"},{"product_id":"mark-levinson-no-534-dual-monaural-power-amplifier","title":"Mark Levinson No 534 Dual-Monaural Power Amplifier","description":"\nNº534 - AVAILABLE SOON!\u003cbr\u003e\u003cbr\u003e\n\n\nThe pursuit of perfect amplification is a well-known theme in high-end audio. New technologies present new approaches, while looking to the past provides inspiration for the future. It was in that spirit that the Mark Levinson® № 534 amplifier was developed: a design advised by the traditions and art of classic Mark Levinson amplifier designs, and with a specific target sound: a deep, expansive soundstage, accurate image placement, extended low bass response with good pitch definition, and detailed high frequencies free from “etching.” To that end, the Mark Levinson engineering team started with the following requirements:\u003cbr\u003e\n•Harmonic distortion \u0026lt; 0.02% at 1kHz and \u0026lt; 0.2% at 20kHz\u003cbr\u003e\n•Bandwidth extending from 0.2Hz to 120kHz, and beyond if possible\u003cbr\u003e\n•Critically damped square wave response, with leading and trailing edges free of any slewing artifacts, and a slew rate of at least 100V\/µs\u003cbr\u003e\n•Maximized open-loop linearity and bandwidth, with global negative feedback in the range of 12-20dB and without nested feedback loops\u003cbr\u003e\u003cbr\u003e\n\nThis fully differential, fully discrete, dual-monaural Pure Path amplifier drives virtually any loudspeaker effortlessly for impeccable imaging, musicality, and openness. A direct-coupled signal path; a highly linear, low-feedback design; and voltage gain and drive stages operating in class A, are joined by the modern system integration capabilities provided by Ethernet, RS-232, and USB for monitoring and network control. Housed in a 6000-series aluminum chassis, like all Mark Levinson equipment, the № 534 is designed and handcrafted in the USA.\u003cbr\u003e\u003cbr\u003e\n\nMark Levinson Pure Path Circuit Design\u003cbr\u003e\n\nSince 1972, Mark Levinson has been dedicated to the uncompromising art of sound, with the guiding principle of musical purity above all else. To achieve that goal like never before, Mark Levinson engineers scoured company archives, ultimately developing a circuit-design philosophy called Pure Path. On a conceptual level, its hallmark principles include a discrete, direct-coupled, fully balanced, dual-monaural signal path that delivers unrestricted, uncompromised sonic purity.\u003cbr\u003e\u003cbr\u003e\n\nFar from merely arranging high quality components in an intelligent manner, Pure Path is the meeting of science and art: Mark Levinson engineers are tasked to create the best possible measured AND subjective performance. To quote Albert Einstein: “Everything should be made as simple as possible, but not simpler.”\n\u003cbr\u003e\u003cbr\u003e\nPure Path highlights in the № 534 include Folded Cascodes, an extremely high bias current, and usage of very little negative feedback.\u003cbr\u003e\u003cbr\u003e\n\nThe Folded Cascode\u003cbr\u003e\n\nMark Levinson components are designed around a Pure Path amplifier circuit concept that makes heavy use of a circuit design element called a cascode. Originally created for improving the bandwidth of vacuum tube circuits in radios, Mark Levinson engineers deploy cascodes in Pure Path circuit designs to both improve bandwidth and enhance linearity. A cascode combines two transistors so that they operate as a single composite device that functions like a single transistor, using the wanted characteristics of each component transistor, and rejecting the unwanted characteristics.\u003cbr\u003e\u003cbr\u003e\n\nMark Levinson engineers began their design of the gain stage with pairs of JFETs (junction field-effect transistors), chosen for their low noise and high gain. JFETs achieve these characteristics in part by being large, and with their large size comes nonlinear gain – or distortion. To mitigate this, BJTs (bipolar junction transistors) were added to the circuit. The BJTs exhibit very low input impedance and very high output impedance, which translates to excellent bandwidth and linearity. By creating a cascode of the JFETs and BJTs, they created a design with the best characteristics of both sets of devices.\u003cbr\u003e\u003cbr\u003e\n\nEngineers then connected the output of the cascode to another transistor of the opposite “gender.” Current flows through it in the opposite direction to “turn around” the direction of the signal current. This special connection is called a Folded Cascode and it is a hallmark of the Pure Path circuit: high gain with low noise, wide bandwidth, and excellent linearity.\u003cbr\u003e\u003cbr\u003e\n\nGain Structure\u003cbr\u003e\n\nThe audio circuitry in the № 534 has been optimized for the best possible open-loop performance. As a result, very little negative feedback is necessary, and the amount employed could be adjusted to achieve certain subjective or objective results. The open-loop gain and bandwidth of the circuit were painstakingly set using precision resistors and compensation capacitors, and additional precision resistors were employed to compose the feedback network.\u003cbr\u003e\u003cbr\u003e\n\nMilitary Grade Components\u003cbr\u003e\n\nAll Mark Levinson equipment employs electronic components carefully chosen for their specific task. Gain-stage JFET pairs have high gain, low noise, low distortion, and because they are encapsulated in the same package, the two devices operate under nearly identical conditions. Capacitors used in critical filtering locations are film types, noted for their consistent performance regardless of temperature and frequency. Finally, resistors in critical gain-setting and feedback locations use tantalum nitride thin-film elements. An extremely costly material, tantalum nitride typically finds use in sensitive military equipment because it is unusually stable with respect to temperature, exhibits very low noise, and is unaffected by magnetic fields. In fine audio equipment, those characteristics make the sound even more revealing and effortless, free of the low-level nonlinearities caused by lesser resistive materials as they heat and cool under dynamic conditions. Housed in an aircraft-grade 6063-T5 extruded aluminum chassis, the № 534 features extremely high build precision, to exceedingly low tolerances.\u003cbr\u003e\u003cbr\u003e\n\nCompleting the Signal Path\u003cbr\u003e\n\nThe № 534 offers balanced and single-ended inputs for use with virtually any preamplifier or source player with variable output. For connection to loudspeakers without needing tools for a secure link, the № 534 features four pairs of gold-plated binding posts with Mark Levinson Hurricane terminal knobs to support either standard or bi-wired loudspeaker connections. Speaker cables terminating in banana plugs can be used in the USA and other non-European countries.\u003cbr\u003e\u003cbr\u003e\n\nSystem-integration connectivity includes Ethernet\/IP control, RS-232, USB for monitoring and configuration via web page, plus 12V triggers.\u003cbr\u003e\u003cbr\u003e\n\nDesigned and Handcrafted in the USA\u003cbr\u003e\n\nLike all Mark Levinson equipment, the № 534 is proudly designed and handcrafted in the USA. A dedicated Engineering Center of Excellence in Shelton, CT houses Mark Levinson engineering and product development, just a state away from small-batch production at Mack Technologies in Westford, MA by a team of craftsmen who bring all Mark Levinson equipment to life.\u003cbr\u003e\u003cbr\u003e\n\nTechnical Specifications:- \u003cbr\u003e\n\nInput connectors:\none pair Balanced, one pair single-ended\u003cbr\u003e\n\nSpeaker Connectors:\nfour pairs of Hurricane loudspeaker outputs\nbanana-plug sockets per channel, except on 230 VAC version\u003cbr\u003e\n\nControl I\/O:\nEthernet, RS-232, Trigger In and Out, USB-A, Mini USB\u003cbr\u003e\n\nRated Output Power:\n250 wpc RMS @ 8Ω, 20Hz to 20kHz @ \u0026lt; 0.3% THD, full output from 2.83VRMS\u003cbr\u003e\n\nFrequency Response:\n10Hz to 20kHz ±0.2dB\u003cbr\u003e\n\nSignal-to-Noise Ratio:\n\u0026gt; 85dB, reference level: 2.83 VRMS\u003cbr\u003e\n\nInput Impedance:\n60 kΩ balanced; 30 kΩ unbalanced\u003cbr\u003e\n\nVoltage Gain:\n26dB\u003cbr\u003e\n\nInput Sensitivity:\n2.83VRMS output at 142mVRMS input\u003cbr\u003e\n\nPower Requirements:\n100V~, 120V~, 230V~, factory set for destination country, 1500W\u003cbr\u003e\n\nDimensions:\u003cbr\u003e\nHeight (with feet): 7.75” (19.7cm)\u003cbr\u003e\nHeight (without feet): 7” (17.8cm)\u003cbr\u003e\nWidth: 17.75” (45.1cm)\u003cbr\u003e\nDepth: 20” (50.8cm)\u003cbr\u003e\u003cbr\u003e\n\nWeight:\u003cbr\u003e\nNet weight: 107 lbs (48.5kg)\u003cbr\u003e\nShipping weight: 124 lbs (56.3kg)\n\n\n","brand":"Mark Levinson","offers":[{"title":"Default Title","offer_id":57413112037708,"sku":"MARKLEVINSONNO534","price":17500.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Mark-Levinson-No-534.jpg?v=1777539477"},{"product_id":"mark-levinson-no-585-5-integrated-amplifier","title":"Mark Levinson No 585.5 Integrated Amplifier","description":"Nº585.5\u003cbr\u003e\u003cbr\u003e \n\n\nBuilding on the international success of the celebrated Nº 585 integrated amplifier, the Nº 585.5 incorporates the same discrete class A Pure Phono stage found in the award winning Nº 526 preamplifier. With unsurpassed analog design, advanced digital audio capability, extensive control and a robust 200 watts per channel, the Nº 585.5 delivers exceptional system performance.\u003cbr\u003e \u003cbr\u003e \n\nEvolution \u003cbr\u003e \n The Mark Levinson Nº 585 has swept up best in class awards and countless accolades around the world, and is now widely regarded as perhaps the finest integrated amplifier ever made. Now, the Nº 585.5 redefines the playback quality of a classic medium; by adding the same Pure Phono stage found in the award winning Nº 523 and Nº 526 preamplifiers taking the reproduction of any source material to new heights of realism. \u003cbr\u003e \u003cbr\u003e \n\n Architecture\u003cbr\u003e \n The foundation of the No 585.5 is its fully discrete, mirror-imaged, dual-monaural analog circuitry featuring individual signal switching relays for each of its five stereo inputs: one XLR and three RCA plus a Stereo Pure Phono stage. Volume controls use discrete R2R ladders and low-noise analog switches for the widest possible bandwidth and maximum signal integrity. The fully-differential Class AB power stage includes an oversized 900VA toroidal transformer with individual secondary windings for the left and right channels. \u003cbr\u003e \u003cbr\u003e \n\n Amplification\u003cbr\u003e \n Each elegantly simple amplifier channel utilizes twelve output transistors and multiple smaller local capacitors that allow them to be placed physically closer to the amplifiers for greater transient response when power is needed immediately. This robust architecture results in a conservative power rating of 200W per channel. System integration and expansion are possible using the stereo RCA pre-outs which can operate full-range or with an included switchable, second-order, 80Hz crossover filter allowing for seamless integration into 2.1-channel systems with powered subwoofers.\u003cbr\u003e \u003cbr\u003e \n\n Pure Phono: Class A for a Classic Medium\u003cbr\u003e \n The Pure Phono stage is a discrete design with no op-amps and operates exclusively in class A throughout, employing tantalum nitride thin-film resistors and polypropylene capacitors with exceptionally low tolerances.\u003cbr\u003e \u003cbr\u003e \n\n A fixed-gain moving magnet (MM) section with five capacitive cartridge-loading settings, and a moving coil (MC) section with three gain settings and 10 resistive cartridge-loading settings ensures optimization for any cartridge. And an ultrasonic filter intelligently compensates for rumble and warping. The Pure Phono stage also contains physically separated channels and balanced inputs for sonic purity.\u003cbr\u003e \u003cbr\u003e \n\n Audio Chassis\u003cbr\u003e \n Building upon this superb analog platform, the Nº 585.5 adds equally outstanding digital audio capability. An ESS Sabre 32-bit O\/A convertor with proprietary jitter elimination circuitry and fully balanced, discrete IN circuitry forms the heart of the digital audio processing stage. Six digital audio inputs are provided including one AES\/EBU, two coaxial and two optical plus a USB audio processor capable of asynchronous data transfer of high resolution DSD and PCM files at up to 192kHz\/32 bits resolution. For low-resolution audio formats, proprietary Clari-Fi'\" signal processing reconstructs information and bandwidth lost in compressed file formats restoring them to higher fidelity. \u003cbr\u003e \u003cbr\u003e \n\n Control\u003cbr\u003e \n System integration and communication ports include Ethernet, USB, RS-232, IR input, and 12V trigger input and output. An iconic Mark Levinson custom cast aluminum system IR remote is included with the Nº 585.5.\u003cbr\u003e \u003cbr\u003e \n\n Construction\u003cbr\u003e \n The chassis of the Nº 585.5 utilizes card-cage architecture to isolate critical low-level analog and digital circuitry from the power supplies and amplifier modules. The steel and aluminum construction features internal amplifier heatsinks and Mark Levinson's iconic black and silver anodized aluminum front panel with its intuitive twin-knob control system and unique red display. A newly designed 3-piece anodized brushed aluminum top cover exudes durability, elegance and quality.\u003cbr\u003e \u003cbr\u003e \n\nTechnical Specifications:-\u003cbr\u003e \u003cbr\u003e \n\nPhono Stage:\u003cbr\u003e \n•RIAA frequency response : 20Hz to 20kHz, ±0.3dB\u003cbr\u003e \n•Infrasonic filter defeatable, 15Hz, 2nd order (12dB\/octave)\u003cbr\u003e \n•Moving Magnet mode ◦Input resistance : 47kΩ\u003cbr\u003e \n◦Input capacitance: selectable; 50, 100, 150, 200, or 680pF\u003cbr\u003e \n◦Gain: 40dB @ 1kHz\u003cbr\u003e \n◦THD+N, 20Hz to 20kHz, 2VRMSoutput: \u0026lt; 0.03%\u003cbr\u003e \u003cbr\u003e \n\n•Moving Coil mode\u003cbr\u003e  \n◦Input resistance: selectable; 20, 33, 50, 66, 100, 200, 330, 500, 1000, or 47k\u003cbr\u003e \n◦Input capacitance: 50pF\u003cbr\u003e \n◦Gain: selectable; 50, 60, or 70dB @ 1kHz\u003cbr\u003e \n◦THD+N, 20Hz to 20kHz, 2VRMS output: \u0026lt; 0.02%, 50 or 60dB settings, \u0026lt; 0.04%, 70db setting\u003cbr\u003e \u003cbr\u003e \n\n\nAmplifier Section:\u003cbr\u003e \n•Output Power: 200W RMS per channel @ 8 Ω, 20Hz – 20kHz\u003cbr\u003e \n•Damping Factor: \u0026gt; 400 @ 20Hz, referred to 8 Ω\u003cbr\u003e \n•Frequency Response: 20Hz – 20kHz, ±0.13dB; 2Hz – 250kHz, +0.2dB\/–3dB\u003cbr\u003e \n•Signal-to-Noise Ratio: \u0026gt; 98dB (20Hz – 20kHz, unweighted); \u0026gt; 103dB (20Hz – 20kHz, A-wtd), referred to full output – maximum volume setting\u003cbr\u003e \n•Voltage Gain: 40.7dB (maximum volume setting)\u003cbr\u003e \n•Total Harmonic Distortion: \u0026lt; 0.01% @ 1kHz, 200W, 8 Ω; \u0026lt; 0.1% @ 20kHz, 200W, 8 Ω\u003cbr\u003e \u003cbr\u003e \n\nPreamplifier Section: Analog\u003cbr\u003e \n•Input Impedance: \u0026gt; 45k Ω (RCA \u0026amp; XLR)\u003cbr\u003e \n•Input Overload: \u0026gt; 5.5V RMS (RCA \u0026amp; XLR)\u003cbr\u003e \u003cbr\u003e \n\nPreamplifier Section: Digital\u003cbr\u003e \n•DAC Board - same as No 585 ◦DAC output voltage @ full scale (0dBFS): 3.7VRMS\u003cbr\u003e \n◦DAC frequency response: 20Hz to 20kHz, +0 \/ ¬–0.2dB\u003cbr\u003e \n◦DAC THD, full scale (0dBFS): \u0026lt; 0.0001% @ 1kHz, \u0026lt; 0.0003% @ 20kHz\u003cbr\u003e \n◦DAC SNR (referred to 3.7VRMS \/ 0dBFS output): \u0026gt; 120dB (A-weighted)\u003cbr\u003e \n◦PCM sample rates\/bit depth: 32, 44.1, 48, 88.2, 96, 176.4, or 192kHz; up to 32 bits\u003cbr\u003e \n◦DSD: Native or DoP (DSD over PCM), single- and double-speed (2.8 and 5.6MHz)\n\n\n\n","brand":"Mark Levinson","offers":[{"title":"Default Title","offer_id":57414587744588,"sku":"MARKLEVINSONNO585.5","price":13332.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Mark-Levinson-No-585-point5-side.jpg?v=1777549692"},{"product_id":"mark-levinson-no-515-turntable","title":"Mark Levinson No 515 Turntable","description":"№ 515\u003cbr\u003e\u003cbr\u003e  \n\nThe № 515 is a premium turntable designed and built in collaboration with recognized leader VPI Industries. Leveraging VPI’s superior technologies and craftsmanship to deliver unique features, performance, and appearance, the № 515 is the first turntable worthy of the Mark Levinson® name.\u003cbr\u003e \u003cbr\u003e \n\nWorld Class Synergy\u003cbr\u003e \n\nTo achieve the stunning design and performance of the № 515, Mark Levinson partnered with VPI Industries, renowned for turntable innovations and exceptional build quality. The № 515 Turntable is handcrafted in the USA to meet the exacting demands of the engineers and designers at Mark Levinson.\u003cbr\u003e \u003cbr\u003e \n\nUnrivaled Build Quality\u003cbr\u003e \n\nThe № 515 is based on a highly damped vinyl-wrapped composite and aluminum sandwich main chassis. The chassis is supported by machined Delrin and Aluminum Mark Levinson feet with a vibration-damping polymer core. The solid Aluminum platter rotates on an inverted bearing, which employs a hardened stainless steel shaft spinning in a phosphor bronze bushing for maximum rotational accuracy.\u003cbr\u003e \u003cbr\u003e \n\nOptimized Drive System\u003cbr\u003e \n\nThe powerful high torque AC synchronous motor is mounted to a separate vinyl-wrapped composite and Aluminum sandwich chassis and housed in its own mechanically isolated enclosure. A precision-machined pulley and triple belt drive system provide smooth, quiet operation. A custom-designed, low-distortion analog oscillator and discrete, class AB power amplifier deliver pristine power to the synchronous motor, while integrated electronic speed control delivers accurate 33 and 45 RPM operation at the push of a button.\u003cbr\u003e \u003cbr\u003e \n\nCustom Features\u003cbr\u003e \n\nThe № 515 features a gimbal-mounted, 3D-printed tonearm with integral headshell, stainless steel counterweight, and discrete internal cartridge lead routing. The tonearm is mounted to a rigid machined Aluminum arm base featuring a precision calibrated vertical tracking angle with on the fly adjustment. The Mark Levinson “knob inspired” stainless steel record weight and felt platter mat ensure maximum stability of playback.\u003cbr\u003e \u003cbr\u003e \n\nFirst Class Analog Source\u003cbr\u003e \n\nCreated for the discriminating analog music lover, the № 515 is the perfect complement to the Pure Phono stage included in the № 526 and № 523 preamplifiers. The № 515 turntable will be available either with or without a factory installed moving coil phono cartridge.\u003cbr\u003e \u003cbr\u003e \n\nTechnical Specifications:-\u003cbr\u003e \u003cbr\u003e \n\nPower Requirements:\n100-120 or 220-240VAC, 50-60Hz; factory set 40W maximum\u003cbr\u003e \n\nWow and flutter:\n \u0026lt; 0.1%\u003cbr\u003e \n\nDimensions (H x W x D):\n7.9” x 21” x 15.9” (200 x 533 x 404mm)\u003cbr\u003e \n\nWeight:\n58 lbs (26kg) net; 76 lbs (34kg) with packaging","brand":"Mark Levinson","offers":[{"title":"Mark Levinson No 515 (without cartridge)","offer_id":57414698762572,"sku":"MARKLEVNO515-NOCARTRIDGE","price":9165.83,"currency_code":"GBP","in_stock":true},{"title":"Mark Levinson No 515 (with cartridge)","offer_id":57423771205964,"sku":"MARKLEVINSONNO515WITHCARTRIDGE","price":10832.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Mark-Levinson-No-515.jpg?v=1777550601"},{"product_id":"mark-levinson-no-5802-integrated-amplifier","title":"Mark Levinson No 5802 Integrated Amplifier","description":"\u003ch3\u003eIntegrated Amplifier for Digital sources\u003c\/h3\u003e\n\nThe Nº 5802 harnesses decades of superlative audio engineering and the latest advancements to deliver unmatched performance and value.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003eDigital Audio\u003c\/h3\u003e\n\nThe Nº 5802 delivers outstanding digital audio capability through the Mark Levinson Precision- Link II DAC. The latest generation ESS Sabre 32-bit D\/A converter with jitter elimination circuitry and a fully balanced, discrete current-to-voltage converter form the heart of the digital audio processing stage. Six digital audio inputs are provided: One AES, two coaxial and two optical S\/PDIF, and one asynchronous USB for playback of high resolution PCM (up to 32 bit\/384kHz) and DSD (up to 11.2MHz) files. The Nº 5802 includes MQA (Master Quality Authenticated) technology, which enables playback of MQA audio files and streams. A Bluetooth receiver equipped with aptX-HD enables the highest quality Bluetooth playback available.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\n\u003ch3\u003eAmplification\u003c\/h3\u003e\nThe fully discrete, direct-coupled, class AB amplifier channels get their power from an oversized (500+ VA) toroidal transformer with individual secondary windings for the left and right channels. The voltage gain stage employs a topology directly descended from the acclaimed Nº 534 amplifier, which is mated to an output stage comprising two high-speed driver transistors operating in class A and six 260V, 15A output transistors. Two Thermal-Trak devices in a unique configuration guarantee stable output bias regardless of load or temperature. Four 10,000-microfarad capacitors per channel, located directly on the output stage circuit board, easily provide enough current for a conservative 125W\/channel at 8 ohms, nearly 250W\/channel at 4 ohms, and stable operation down to 2 ohms. Variable line-level RCA outputs allow system expansion and flexibility.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\n\u003ch3\u003eControl\u003c\/h3\u003e\nSystem integration and communication ports include Ethernet, USB, RS-232, IR input, and 12V trigger input and output. A newly designed, solid aluminum IR remote is included with the Nº 5805. Finally, an internal webpage allows setup, import and export of configurations, and software updates using a PC and standard web browser. In addition, third party drivers are available.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\n\u003ch3\u003eBold new industrial design\u003c\/h3\u003e\nRobust materials, lavish finishes, and striking geometry are hallmark attributes of Mark Levinson designs. The one-inch thick, bead-blasted, black-anodized, solid aluminum front panels are machined and contoured to flow seamlessly into the sleek glass display, which itself is recessed into a clear-anodized aluminum bezel.\u003cbr\u003e\u003cbr\u003e\n\nThe iconic Mark Levinson hourglass knobs are redefined - machined with a gently curved profile transitioning into a rounded front, with feet to match. With debossed top cover vents, screen-printed logo behind the glass panel, and aluminum buttons, no detail has been overlooked. An elegant 5000 Series custom aluminum IR remote control is included.","brand":"Mark Levinson","offers":[{"title":"Default Title","offer_id":57415489323340,"sku":"MARKLEVINSONNO5805","price":5832.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/mark-levinson-no_5805.jpg?v=1777556466"},{"product_id":"mark-levinson-no-5805-integrated-amplifier-with-phono-stage","title":"Mark Levinson No 5805 Integrated Amplifier with Phono Stage","description":"\u003ch3\u003eIntegrated Amplifier for Digital and Analog sources\u003c\/h3\u003e\nThe Nº 5805 harnesses decades of superlative audio engineering and the latest advancements to deliver unmatched performance and value.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\n\u003ch3\u003eAnalog Input Stage\u003c\/h3\u003e\n\nThe foundation of the Nº 5805 is its proprietary PurePath signal path- a fully discrete, direct-coupled, dual-monaural line-level preamp circuit, for which the Shelton design team has two patents pending. A unique single gain stage mated to a digitally controlled resistor network for volume adjustment maintains maximum signal integrity and widest possible bandwidth. Each of its three stereo line level inputs—one balanced XLR and two single-ended, using custom Mark Levinson RCA connectors—has its own individual high-reliability signal switching relays.\u003cbr\u003e\u003cbr\u003e\n\nA newly designed Phono stage features a hybrid gain topology, mating key discrete components from the acclaimed 500 Series Pure Phono stage with low-noise integrated circuits for high performance at lower cost. Also like the 500 Series, a hybrid active\/passive RIAA equalizer employs precision resistors and polypropylene capacitors for exceptional accuracy and sonic clarity. The user can select MM\/MC gain and infrasonic filter from the setup menu, while capacitive and resistive loading settings are easily accessed from the rear panel.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\n\u003ch3\u003eAmplification\u003c\/h3\u003e\nThe fully discrete, direct-coupled, class AB amplifier channels get their power from an oversized (500+ VA) toroidal transformer with individual secondary windings for the left and right channels. The voltage gain stage employs a topology directly descended from the acclaimed Nº 534 amplifier, which is mated to an output stage comprising two high-speed driver transistors operating in class A and six 260V, 15A output transistors. Two Thermal-Trak devices in a unique configuration guarantee stable output bias regardless of load or temperature. Four 10,000-microfarad capacitors per channel, located directly on the output stage circuit board, easily provide enough current for a conservative 125W\/channel at 8 ohms, nearly 250W\/channel at 4 ohms, and stable operation down to 2 ohms. Variable line-level RCA outputs allow system expansion and flexibility.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\n\u003ch3\u003eDigital Audio\u003c\/h3\u003e\nBuilding upon the superb analog platform, the Nº 5805 adds equally outstanding digital audio capability with the Mark Levinson PrecisionLink II DAC. The latest generation ESS Sabre 32-bit D\/A converter with jitter elimination circuitry and a fully balanced, discrete current-to-voltage converter form the heart of the digital audio processing stage. Four digital audio inputs are provided: one coaxial and two optical S\/PDIF, and one asynchronous USB for playback of high resolution PCM (up to 32 bit\/384kHz) and DSD (up to 11.2MHz) files. The No 5805 includes MQA (Master Quality Authenticated) technology, which enables playback of MQA audio files and streams. A Bluetooth receiver equipped with aptX-HD enables the highest quality Bluetooth playback available.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\n\u003ch3\u003eControl\u003c\/h3\u003e\nSystem integration and communication ports include Ethernet, USB, RS-232, IR input, and 12V trigger input and output. A newly designed, solid aluminum IR remote is included with the Nº 5805. Finally, an internal webpage allows setup, import and export of configurations, and software updates using a PC and standard web browser. In addition, third party drivers are available.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\n\u003ch3\u003eBold new industrial design\u003c\/h3\u003e\nRobust materials, lavish finishes, and striking geometry are hallmark attributes of Mark Levinson designs. The one-inch thick, bead-blasted, black-anodized, solid aluminum front panels are machined and contoured to flow seamlessly into the sleek glass display, which itself is recessed into a clear-anodized aluminum bezel.\u003cbr\u003e\u003cbr\u003e\n\nThe iconic Mark Levinson hourglass knobs are redefined - machined with a gently curved profile transitioning into a rounded front, with feet to match. With debossed top cover vents, screen-printed logo behind the glass panel, and aluminum buttons, no detail has been overlooked. An elegant 5000 Series custom aluminum IR remote control is included.","brand":"Mark Levinson","offers":[{"title":"Default Title","offer_id":57415490765132,"sku":"MARKLNO5805","price":6665.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/mark_levinson_no_5805_front.jpg?v=1777556502"},{"product_id":"mark-levinson-no-5101-streaming-sacd-player-and-dac","title":"Mark Levinson No 5101 Streaming SACD Player And DAC","description":"\u003ch3\u003eDive Deeper into your Digital Music\u003c\/h3\u003e\nExperience the passion of the performance as you unlock the full potential of your digital music library. With a bold industrial design, the № 5101 combines innovative audio technology with unmatched performance and versatility. This 3-in-1 audio player combines a Super Audio CD player, high-resolution network streaming capability and Precision Link II Digital-to-Analog Converter (DAC) to bring you incredibly realistic sound reproduction.\u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003eThe Flexibility of 3-in-1\u003c\/h3\u003e\nThe № 5101 includes a slot-loading SACD player, network streamer and Digital-to-Analog Converter in one beautifully designed component. This means that the № 5101 plays all disc formats, supports high-resolution streaming from major streaming platforms and plays files from storage drives including USB.\u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003eDynamic Digital Audio\u003c\/h3\u003e\nTo bring you a high-quality, vibrant digital music experience, the № 5101 includes a custom-made Precision Link II Digital-to-Analog Converter (DAC). This premium component is key to any high-end audio system — and reveals intricate details in your music that you’ve never heard before.\u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003ePure Path Circuit Design\u003c\/h3\u003e\nOur proprietary approach to circuit design delivers uncompromising musical purity and an engaging listening experience. By using discrete components carefully selected for their precise function, the № 5101 delivers unmatched sound quality that captures the nuances of every note.\n","brand":"Mark Levinson","offers":[{"title":"Default Title","offer_id":57415589790028,"sku":"MLNO5101","price":4579.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Mark-Levinson-No-5101-front.jpg?v=1777556747"},{"product_id":"mark-levinson-no-5105-turntable","title":"Mark Levinson No. 5105 Turntable","description":"Showcase your vinyl collection with a turntable custom made with the finest materials, technology and artisanship in the world. With a lavish design and outstanding performance, the № 5105 is engineered to reveal every intricate nuance from a song’s original recording with explosive dynamics and an expansive sonic image.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003eSeriously Stable\u003c\/h3\u003e\nMachined from solid aluminum, the № 5105’s plinth and platter are exceptionally stable. To provide a completely quiet platform, the heavy chassis also rests on adjustable isolation feet. The result is extraordinary stability that allows the cartridge to accurately reproduce every intricacy of your music — without interference from external vibrations.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003ePrecision Tracking\u003c\/h3\u003e\nThe № 5105’s ultralight and ridged carbon fiber arm tube provides outstanding cartridge stability. This allows the cartridge and stylus to pick up all the subtle details hidden in your record’s grooves and reveal the crystal-clear dynamics and space of your music.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003eSuperior Sound Reproduction\u003c\/h3\u003e\nThe № 5105’s custom gimbal ensures low-friction movement both horizontally and vertically, which is critical to creating a wide and deep three-dimensional sound stage. Hear the location of each instrument and the reflections of the room where the music was recorded with pinpoint accuracy.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\nCustom 10-inch carbon fiber tonearm\u003cbr\u003e\nGlass and aluminum front panel feature speed and standby controls\u003cbr\u003e\nIntegrated bubble level\u003cbr\u003e\nOptional factory-installed Ortofon moving coil phono cartridge\u003cbr\u003e\nDesigned and handcrafted in the USA\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003eDrive System\u003c\/h3\u003e\nIsolation mounted 12V synchronous motor\u003cbr\u003e\nFully digital motor electronics with 33\/45 speed selections\u003cbr\u003e\nStable speed with low distortion\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003eChassis \u0026amp; Support\u003c\/h3\u003e\nHandcrafted from a solid, brushed aluminum plinth precision machined from a single billet\u003cbr\u003e\n14 lb. solid aluminum platter with backside coated in resonance damping material\u003cbr\u003e\nAdjustable isolation feet","brand":"Mark Levinson","offers":[{"title":"No Cartridge","offer_id":57415590281548,"sku":"MLNO5105","price":4832.5,"currency_code":"GBP","in_stock":true},{"title":"Mark Levinson No. 5105MC Turntable - With Cartridge","offer_id":57423958344012,"sku":"MLNO5105MC","price":5415.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Mark-Levinson-Turntable-No-5105-angle.jpg?v=1777556752"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/collections\/ml_0de70c69-7844-4b4e-bd89-131afe29cf50.gif?v=1777394186","url":"https:\/\/www.stoneaudio.co.uk\/collections\/mark-levinson.oembed","provider":"Stone Audio","version":"1.0","type":"link"}