{"title":"Naim Audio","description":"Based in Salisbury, a short drive from our showroom here in Poole, Dorset,  Naim have for over thirty-five years striven to design and manufacture the world’s finest high-fidelity audio products: compact disc players, hard disk players, tuners, amplifiers, loudspeakers and all-in-one systems that define the best. The “best” for Naim however isn’t measured in obscure technical parameters, rather, through the experience of owning, using and enjoying. Choosing a Naim system is an experience like no other. Choose Naim and as an experienced and committed retailer we will work tirelessly to make sure your expectations are not just satisfied but exceeded, and that the “best” is judged by the only person that really matters: you.","products":[{"product_id":"naim-nait-5si-integrated-amplifier","title":"Naim Nait 5si Integrated Amplifier","description":"\u003cp\u003eNAIT 5si is the ideal introduction to the Naim sound. It features an improved power supply, delivers 60 Watts per channel (into 8ohms) and features a new 1\/4\" (6.35mm front panel headphone output. Improved components throughout and a revised electronic design result in significantly enhanced performance. Despite its entry-level status the NAIT 5si packs a heavyweight punch when it comes to sound quality.\u003c\/p\u003e\n\u003cp\u003eDecades have passed, but the role of the NAIT 5si is fundamentally the same as its original forebear. So the engineering challenge - to maximise performance whilst maintaining engineering efficiency, quality and reliability - hasn't changed. Amplifier technology has moved on considerably however, and while the NAIT 5si occupies the same position in the Naim range as the original NAIT, its performance might be from a different world.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e60W (into 8ohms) 90W (into 4 ohms)\u003cbr\u003e4 analogue inputs: 2 x DIN, 2 x RCA\u003cbr\u003e1\/4 inch (6.35mm) front panel headphone output on front panel\u003cbr\u003eCustom-designed toroidal transformer with two separate windings\u003cbr\u003eBlack power coated alluminium case and fascia\u003cbr\u003eBritish build and design\u003cbr\u003e\u003cbr\u003eThe NAIT 5si provides four analogue inputs and a 60 Watt per channel power amplifier. It features a new headphone amplifier and borrows numerous technologies from across the spectrum of Naim products; all dedicated towards maximising its ability to communicate the fundamentals of music. And communicate it does. The NAIT 5si brings clarity, engaging dynamics and, most of all, infectious enthusiasm to every music source and genre.\u003c\/p\u003e","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407167496524,"sku":"NAIMNAIT5I","price":1415.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naim-nait-5si-front-angle.jpg?v=1777455098"},{"product_id":"naim-cd5si-cd-player","title":"Naim CD5si CD Player","description":"\u003cp\u003eThe CD5si replaces the CD5i as Naim’s entry level CD player. It is a result of Naim’s continued development work into digital audio and CD playback, applying high-end audio technology to deliver even greater sound quality at its price point. Ideally paired with the NAIT 5i integrated amplifier, the CD5si is part of an attractive and accessible two-box solution that can deliver superb sound quality from your CDs.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003cbr\u003e1. New and improved DAC section – including Burr Brown PCM1793 DAC chip (similar to that used in the SuperUniti and NDX except it’s hardware controlled because it doesn’t need to adjust for different sample rates). The filter stage and clock have also been improved. The result is dramatically lower outer band noise than the CD5i for greater sound quality.\u003cbr\u003e2. New high-performance CD mechanism – with new and improved laser-optics and silent door operation.\u003cbr\u003e3. New analogue filter stages – specially selected through listening tests for their beneficial effect on sound quality.\u003cbr\u003e4. Internal PSU voltage increased - for improved linearity of the output signal and subsequently greater sound quality.\u003c\/p\u003e","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407178539340,"sku":"NAIMCD5si","price":1082.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimcd5i.jpg?v=1777455208"},{"product_id":"naim-headline-headphone-amplifier","title":"Naim Headline Headphone Amplifier","description":"The Headline is an amplifier designed to offer optimum performance from a variety of high impedance headphones.\u003cbr\u003e\u003cbr\u003eDue to overwhelming demand, the Headline can now be ordered with a pair of RCA plugs in place of the 5 pin DIN. This is especially welcome to Nait 5i owners and owners of non-Naim preamps. Same price applies for both DIN and RCA types.\u003cbr\u003e\u003cbr\u003eFitted with a captive lead, the Headline takes its signal from the tape socket of any of our pre-amplifiers. It has its own volume control and is designed to be very, very quiet. It has the ability to drive most headphones to an adequate level (loud!) with low distortion.\u003cbr\u003e\u003cbr\u003eHeadphones tend to be rather revealing of both noise and distortion, so we have spent a great deal of effort getting these parameters to extremely low levels.\u003cbr\u003e\u003cbr\u003eThe Headline must be used with an external power supply such as an i-supply, NAPSC, Flat-Cap 2 or Hi-Cap, using a special interconnect, type SLIC.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003eSuitable for headphones 8 Ohms to 2 KOhms\u003cbr\u003eFrequency response -3dB @ 10Hz \u0026amp; 72kHz\u003cbr\u003ePower output (into 8 Ohms) 560mW per channel\u003cbr\u003eMax output voltage 3.7V rms into 2kOhms\u003cbr\u003eVoltage gain +13.5dB\u003cbr\u003eDimensions (H x W x D): 57 x 121 x 187mm","brand":"Naim Audio","offers":[{"title":"Naim Headline 2 (exc. power supply) - DIN","offer_id":57407181062476,"sku":"NAIMHEADLINE","price":440.83,"currency_code":"GBP","in_stock":true},{"title":"Naim Headline 2 (exc. power supply) - RCA","offer_id":57415879622988,"sku":"NAIMHEADLINERCA","price":440.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimheadline.jpg?v=1777455262"},{"product_id":"naim-stageline","title":"Naim StageLine","description":"The Stageline is a separate phono stage, available in either moving coil or moving magnet versions, designed to optimise sound quality from a wide range of cartridges.\u003cbr\u003e\u003cbr\u003eThe Stageline can be powered either from a special socket on the rear of the NAIT 5 or by a separate supply such as the Flat-Cap 2 for even better performance.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAvailable as: Moving Coil and Moving Magnet\u003cbr\u003e'S': 100uV\/470ohm for low output cartridges\u003cbr\u003e'K': 100uV\/560ohm for selected moving coil cartridges\u003cbr\u003e'E': 400uV\/400ohm for medium ouput cartridges\u003cbr\u003e'N': 2mV\/47kohms\u003cbr\u003e\u003cbr\u003eDimensions (H x W x D): 57 x 121 x 187mm","brand":"Naim Audio","offers":[{"title":"MM (exc power supply)","offer_id":57407182537036,"sku":"NAIMSTAGELINE","price":349.17,"currency_code":"GBP","in_stock":true},{"title":"MC (exc power supply)","offer_id":57415880212812,"sku":"NAIMSTAGELINEMC","price":349.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimstageline.jpg?v=1777455280"},{"product_id":"naim-nac-202-pre-amplifier","title":"Naim NAC 202 Pre Amplifier","description":"The Naim NAC 202 combines first-class sound quality with flexibility, style and excellent value.\u003cbr\u003eSignificant improvements in technology led to an entirely new range using new high quality star-earthed circuit boards, combining the classic Naim values of musicality and power with flexibility and value. \u003cbr\u003e\u003cbr\u003eThe Naim NAC 202 may either be powered by a NAP 150 or NAP 200 amplifier or significantly upgraded by adding Naim power supplies to independently feed the analogue audio and digital control circuits.\u003cbr\u003eThe six inputs on the Naim NAC 202 can be selected directly from either the front panel or the NARCOM system remote. Two of the inputs can be configured for use with RCA phono connectors, allowing a wide range of non-Naim cables and components to be used. A dedicated unity-gain input is also provided for use with the Naim AV2 processor or similar.\u003cbr\u003e\u003cbr\u003eSix line-level inputs including two user-configurable versatile (DIN \/ phono) inputs.\u003cbr\u003eUser configurable unity-gain AV input. \u003cbr\u003ePowered input for use with Stageline or Prefix phono stage.\u003cbr\u003eFull infrared remote control.\u003cbr\u003eRC5 input for wired remote control in complex installations.\u003cbr\u003eOptional RS232 input \/ output for use in full home automation systems.\u003cbr\u003eUpgradeable with both analogue (Hi-Cap, Super-Cap) and digital (NAPSC) power supplies.\u003cbr\u003eThe years of research Naim spent developing the new NAC 552 flagship pre-amplifier introduced a new level of technical and musical performance. Many of the developments, along with the elegant new styling have been applied to the NAC 202.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003eAnalogue inputs 6 (2 configurable)\u003cbr\u003eTape outputs 3\u003cbr\u003eInput sensitivities 75mV, 47kOhm\u003cbr\u003eOutput levels, tape 75mV, 600 Ohm\u003cbr\u003e Main output 0.775V, \u0026lt; 50 Ohm\u003cbr\u003eOverload margin, all inputs, all audio frequencies 40dB\u003cbr\u003eDimensions (H x W x D) 87 x 432 x 314mm\u003cbr\u003eFinish Black","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407185912140,"sku":"NAIMNAC202","price":1957.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimnac202.jpg?v=1777455292"},{"product_id":"naim-nac-282-including-napsc2-pre-amplifier","title":"Naim NAC 282 (including NAPSC2) Pre Amplifier","description":"The included NAPSC power supply independently powers the digital and control circuits while the audio circuits are fed either from a NAP 150 or NAP 200 power amplifier or from a stand-alone power supply such as the Hi-Cap or Super-Cap.\u003cbr\u003e\u003cbr\u003eA user configurable 'Smart IR' system remote control is supplied.\u003cbr\u003eTwo of the six inputs on the naim NAC 282 can be configured either as the usual DIN plug inputs, preferred for their superior earthing and impedance matching, or for use with the more common RCA phono connectors, allowing a wide range of non-Naim cables and components to be used. A dedicated unity-gain input is provided for use with the Naim AV2 processor or similar.\u003cbr\u003e\u003cbr\u003eEach of the six inputs feature separate listen and record facilities. In addition to the usual record mute, the NAC 282 mutes not only the output but powers down all associated circuitry, eliminating any possibility of degrading the main output.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSix line-level inputs including two user-configurable versatile (DIN \/ phono) inputs.\u003cbr\u003eUser configurable unity-gain AV input.\u003cbr\u003ePowered input for use with Stageline or Prefix phono stage.\u003cbr\u003eFull infrared remote control.\u003cbr\u003eRC5 input for wired remote control in complex installations.\u003cbr\u003eOptional RS232 input\/output for use in full home automation systems.\u003cbr\u003eUpgradeable with both analogue (Hi-Cap, Super-Cap) and digital (NAPSC) power supplies.\u003cbr\u003eThe NAC 282 combines truly awesome sound quality, with user selectable features and flexibility that ensure it will function as the heart of a high quality hi-fi system for many years.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003eAnalogue inputs 6 (2,configurable)\u003cbr\u003eTape outputs 3\u003cbr\u003eInput sensitivities 75mV, 47kOhm\u003cbr\u003eOutput levels, tape 75mV, 600 Ohm\u003cbr\u003eInput overload margin, all audio frequencies 40dB\u003cbr\u003eDimensions (H x W x D) 87 x 432 x 314mm\u003cbr\u003eFinish Black","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407186501964,"sku":"NAIMNAC282","price":4165.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimnac282.jpg?v=1777455296"},{"product_id":"naim-nac-252-pre-amplifier","title":"Naim NAC 252 pre Amplifier","description":"The NAC 252 descends from the NAC 52 - still one of the finest pre-amplfiers ever manufactured. It brings both control and connectivity advances over the NAC 52, and a significantly enhanced construction, aesthetic and finish. Its performance, too, is enhanced with the benefit of a decade of R \u0026amp; D bringing yet more speed, detail, transparency and music.\u003cbr\u003e\u003cbr\u003eImproved earthing arrangements have resulted in an entirely new circuit topology, built upon a single very high quality, anti-resonance main audio circuit board. Anti-vibration, resonance-controlling feet compliment the ingeniously slotted and suspended main circuit board to protect the sensitive internal components from resonance and microphonic vibration. Ten independently regulated power supplies are fed from the matching Super-Cap power supply. Totally separate regulated supplies for the digital control and switching ensure no noise is generated in the audio circuits.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSix line-level inputs including two user-configurable versatile (DIN \/ phono) inputs.\u003cbr\u003eUser configurable unity-gain AV input.\u003cbr\u003ePowered input for use with Stageline or Prefix phono stage.\u003cbr\u003eFull infrared remote control.\u003cbr\u003eRC5 input for wired remote control in complex installations.\u003cbr\u003eOptional RS232 input \/ output for use in full home automation systems.\u003cbr\u003eThe Naim Super-Cap power supply provides each of the ten audio circuits with an independent regulated power supply.\u003cbr\u003eSeparately regulated power supply for the digital control and switching circuitry.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003eAnalogue inputs 6 (configurable)\u003cbr\u003eTape outputs 3\u003cbr\u003eInput sensitivities 75mV, 47kOhm\u003cbr\u003eOutput levels, tape 75mV, 600 Ohm\u003cbr\u003eMain output 0.775V,    \u0026lt;  50 Ohm\u003cbr\u003eOverload margin, all inputs, all audio frequencies 40dB\u003cbr\u003eDimensions (H x W x D) 87 x 432 x 314mm\u003cbr\u003eFinish Black, brushed aluminium","brand":"Naim Audio","offers":[{"title":"Naim NAC 252 Pre Amplifier (Exc Supercap DR)","offer_id":57407186764108,"sku":"NAIMNAC252","price":5832.5,"currency_code":"GBP","in_stock":true},{"title":"Naim NAC 252 (Inc Supercap DR)","offer_id":57415881523532,"sku":"NAIMNAC252incsupercapdr","price":9873.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimnac252.jpg?v=1777455300"},{"product_id":"naim-nac-552-pre-amplifier","title":"Naim NAC 552 Pre Amplifier","description":"The NAC 552 is by some distance the most advanced Naim pre-amplifier ever and has some claim, therefore, to being the best pre-amplifier, period.\u003cbr\u003e\u003cbr\u003eThe introduction of the NAP 500 in 2001 brought with it a new level of technical and musical performance. A Naim design project group began reviewing the existing pre-amplifier designs exploring possibilities for major design improvement over the existing reference pre-amplifier, the Naim NAC 52.\u003cbr\u003e\u003cbr\u003ePower supply design has always been at the heart of Naim research and this project was no exception. For the NAC 552 a radical new split rail power supply configuration has been employed that almost eliminates power supply noise in the signal earth. Housed in a separate, full-width brushed aluminium case; the power supply features a massive 800 VA toroidal transformer, three enormous smoothing capacitors and fourteen hand selected power regulators to independently supply the different stages of the pre-amplifier.\u003cbr\u003e\u003cbr\u003eAs pioneered in the Naim CDS compact disc player fully suspended sub-chassis mounted circuit boards are used in the Naim NAC 552. This method of suspension maximises isolation, hence minimizing the effect of vibration on the highly sensitive electronic components.\u003cbr\u003e\u003cbr\u003eThe NAC 552 owner can configure two of the inputs for use with the more common RCA phono type connectors, enabling the use of alternative components with pre-owned interconnects. Each of the six inputs has separate listen and record facilities. A dedicated unity gain input is provided for use with the Naim AV2 processor or similar.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003eAnalogue inputs 6 (configurable)\u003cbr\u003eTape outputs 3\u003cbr\u003eInput sensitivities 75mV, 47kOhm\u003cbr\u003eOutput levels, tape 75mV, 600 Ohm\u003cbr\u003eMain output 0.775V, \u0026lt; 50 Ohm\u003cbr\u003eOverload margin, all inputs, all audio frequencies 40dB\u003cbr\u003eDimensions (H x W x D) 87 x 432 x 314mm\u003cbr\u003eFinish Black, brushed aluminium","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407186895180,"sku":"NAIMNAC552","price":17582.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimnac552.jpg?v=1777455309"},{"product_id":"naim-nap-200-dr","title":"Naim NAP 200 DR","description":"During the years of research that went into the NAP 500 amplifier, many technical developments were made that could be successfully applied to the existing products. Many of these developments, along with the elegant new styling have been incorporated, resulting in the 'Classic' line-up.\u003cbr\u003e\u003cbr\u003eLike the flagship NAP 500, the NAP 200 uses a new circuit design with improved earthing arrangements built on a very high quality, anti-resonance main audio circuit board.\u003cbr\u003e\u003cbr\u003eAnti-vibration, resonance-controlling feet serve to protect the sensitive internal components from resonance and microphonic vibration.\u003cbr\u003e\u003cbr\u003eA new, top-quality 430VA toroidal transformer provides more than 300VA of transient power. Separate windings provide dedicated left and right channel rectified supplies with two smoothing capacitors per channel. The NAP 200 also has a separate winding providing a pre-amplifier power supply. This enables the NAP 200 to be used in a two-box amplifier configuration with a Naim pre-amplifier such as the NAC 202.\u003cbr\u003e\u003cbr\u003eThe naim NAP 200 is stable into any load and able to drive a 2-ohm load for long periods of time.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSpecifications \u003cbr\u003ePower output continuous [8 Ohm] 70 Watts\u003cbr\u003eTransient capability 300 VA\u003cbr\u003eVoltage gain + 29 dB\u003cbr\u003eInput impedance 18 kOhm\u003cbr\u003eFrequency response -3dB @ 2Hz \u0026amp; 65kHz\u003cbr\u003eMains supply 100V, 115V, 230V (50 or 60Hz)\u003cbr\u003eDimensions (H x W x D) 87 x 432 x 314mm\u003cbr\u003eFinish Black","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407193022796,"sku":"NAIMNAP200","price":1999.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimnap200.jpg?v=1777455368"},{"product_id":"naim-nap-250-dr","title":"Naim NAP 250 DR","description":"The newest Naim NAP 250 delivers speed, power and agility providing exceptional detail and musicality in a package built to swing for another 25 years.\u003cbr\u003e\u003cbr\u003eFor 27 years the NAP 250 has been at the heart of thousands of high-quality audio systems around the world. During the years of research that went into the NAP 500, many technical developments came about that could be successfully applied to the NAP 250. Many of these developments, along with the elegant new styling have been incorporated, resulting in a new Classic line-up.\u003cbr\u003e\u003cbr\u003eLike the flagship NAP 500, and the NAP 300, the NAP 250 uses a new circuit design with improved earthing arrangements, built on a very high quality, anti-resonance main audio circuit board. The NAP 250 uses the same 007 transistors that were custom-designed for the NAP 500. These outstanding components each provide up to 80 amps and 350 Watts, negating the need to use parallel pairs of transistors (which always have a negative effect on sound). Additional 007 transistors are used in the fully regulated power supply, ensuring the very best performance.\u003cbr\u003e\u003cbr\u003eAnti-vibration, resonance-controlling feet serve to protect the sensitive internal components from resonance and microphonic vibration.\u003cbr\u003e\u003cbr\u003eA new top-quality transformer is used providing the ability to deliver more than 15 Amps and swing a massive 400VA on transients. The NAP 250 is stable into any load and able to drive a 2-Ohm load for long periods of time.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003ePower output continuous [8 Ohm] 80 Watts\u003cbr\u003eTransient capability 400 VA\u003cbr\u003eVoltage gain + 29 dB\u003cbr\u003eInput impedance 18 kOhm\u003cbr\u003eFrequency response -3dB @ 2Hz \u0026amp; 65kHz\u003cbr\u003eMains supply 100V, 115V, 230V (50 or 60Hz)\u003cbr\u003eDimensions (H x W x D) 87 x 432 x 314mm\u003cbr\u003eFinish Black","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407193186636,"sku":"NAIMNAP250","price":3582.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimnap250.jpg?v=1777455372"},{"product_id":"naim-nap-300-dr","title":"Naim NAP 300 DR","description":"After seventeen successful years at the top of Naim's amplifier range, the NAP 135 has been eclipsed by the flagship NAP 500. Many years of research went into the NAP 500, as fundamentally new components and technologies had to be perfected before Naim could raise the performance level. Many of these technical developments, along with the elegant new styling have been applied to the mighty NAP 300.\u003cbr\u003e\u003cbr\u003eLike the flagship Naim NAP 500, the NAP 300 is a stereo two-chassis amplifier, one box containing the audio amplifier and the second housing the individually regulated power supply. Improved earthing arrangements have resulted in an entirely new circuit topology built on a very high quality, anti-resonance main audio circuit board. The NAP 300 uses the same 007 transistors that were custom-designed for the NAP 500. These outstanding components each provide up to 80 Amps and 350 Watts, negating the need to use parallel pairs of transistors (which always have a negative effect on sound). Additional 007 transistors are used in the fully regulated power supply, ensuring the very best performance.\u003cbr\u003e\u003cbr\u003eThe Naim NAP 300 delivers awesome power without sacrificing any speed or agility to provide awe-inspiring levels of detail, ambient information and musicality.\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003ePower output continuous [8 Ohm] 90 Watts\u003cbr\u003eTransient capability 500 VA\u003cbr\u003eVoltage gain + 29 dB\u003cbr\u003eInput impedance 18 kOhm\u003cbr\u003eFrequency response -3dB @ 2Hz \u0026amp; 70kHz\u003cbr\u003eNAP300 dimensions (H x W x D) 87 x 432 x 314mm\u003cbr\u003ePower supply dimensions (H x W x D) 87 x 432 x 314mm\u003cbr\u003eFinish Black","brand":"Naim Audio","offers":[{"title":"(Inc Power Supply)","offer_id":57407193547084,"sku":"NAIMNAP300","price":7165.83,"currency_code":"GBP","in_stock":true},{"title":"Naim NAP 300 (inc Power Supply) - 2nd User","offer_id":57415884308812,"sku":"NAIMNAP300SH","price":5829.17,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimnap300.jpg?v=1777455376"},{"product_id":"naim-nap-500-dr","title":"Naim NAP 500 DR","description":"Our design brief for the NAP 500 required an amplifier that could drive any load down to 2 Ohms for prolonged periods, deliver over 100W into 8 Ohms and sound - at the very least - as good as our reference at the time, the NAP135.\u003cbr\u003e\u003cbr\u003eNaim has always understood the importance of reducing supply-induced intermodulation distortions and mains harmonic electrical noise from an amplifier, and has always used regulated supplies in its premier amplifiers. It was considered likely that improvements in these areas would yield further large gains in performance. Each channel of the NAP 500 includes ten stages of local regulation. To reduce interference from the mains supply further, the transformer and first stages of the power supply are in a separate enclosure (the same size as a Supercap), which provides twelve raw d.c. supplies for the power amplifier. Hence, the NAP 500 system consists of two boxes, a stereo amplifier and a separate power supply.\u003cbr\u003e\u003cbr\u003eThe performance of the finished amplifier exceeds the design brief in all areas. Power output per channel is over 140W into 8 ohms and compared with the NAP 135, which in itself already provided exemplary measurements, the NAP 500 has five times the internal bandwidth, a quarter of the distortion and a one hundred times reduced operating noise floor.\u003cbr\u003e\u003cbr\u003eNeedless to say, every aspect of the NAP 500's sound quality is truly exceptional.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003ePower output continuous [8 Ohm] 140 Watts\u003cbr\u003eVoltage gain + 29 dB\u003cbr\u003eInput impedance 18 kOhm\u003cbr\u003eFrequency response -3dB @ 1.5Hz \u0026amp; 100kHz\u003cbr\u003eNAP 500 dimensions (H x W x D) 160 x 432 x 374mm\u003cbr\u003ePower supply dimensions (H x W x D) 87x 432 x 314mm\u003cbr\u003eFinish Black","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407194038604,"sku":"NAIMNAP500","price":18332.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimnap500.jpg?v=1777455381"},{"product_id":"naim-snaxo-362","title":"Naim SNAXO 362","description":"In an active system a Snaxo electronic crossover divides the audio spectrum into two or three separate frequency bands, depending on the loudspeaker type employed.\u003cbr\u003e\u003cbr\u003eThe crossover is connected between the pre-amplifier and power amplifiers. Each power amplifier is then connected directly to the appropriate loudspeaker drive unit, and only handles one frequency band. This allows better control of the drive unit resulting in more accurate music reproduction. As there is no passive crossover no amplifier power is wasted and information loss is minimised.\u003cbr\u003e\u003cbr\u003eThe great potential possessed by an active system demands not only source components of the very highest quality but also for them to be perfectly matched and installed.\u003cbr\u003e\u003cbr\u003eThe SNAXO 362 is Naim's three-way, 18dB\/octave fixed frequency crossover. Crossover frequencies are defined by a series of active filters, designed with particular attention to transient handling, which must be matched to the loudspeaker system with which the crossover is to be used.\u003cbr\u003e\u003cbr\u003eThe SNAXO 362 can be used tri-amped, with three stereo amplifiers, or in a six-pack system using six mono amplifiers. The output level to each loudspeaker drive unit can be adjusted by means of enclosed cermet potentiometers mounted inside the SNAXO.\u003cbr\u003e\u003cbr\u003ePower to the unit is supplied by a Flat-Cap 2, Hi-Cap, or Super-Cap power supply.\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003eInput impedance \u0026gt;10 kOhms\u003cbr\u003eOutput impedance \u0026lt; 50 Ohms\u003cbr\u003eDimensions (H x W x D) 87 x 207 x 314mm\u003cbr\u003eFinish Black","brand":"Naim Audio","offers":[{"title":"OR 242 (Standard variants)","offer_id":57407219335500,"sku":"NAIMSNAXO362-AV","price":1374.17,"currency_code":"GBP","in_stock":true},{"title":"BMR","offer_id":57415887716684,"sku":"NAIMSNAXO362BMR","price":2082.5,"currency_code":"GBP","in_stock":true},{"title":"or 242 (Custom variants)","offer_id":57415887946060,"sku":"NAIMSNAXO362OR242-CV","price":1749.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimsnaxo_463ee25b-e6c6-4302-a28a-65e0633c1ab0.jpg?v=1777455543"},{"product_id":"naim-label-sampler-4","title":"Naim Label Sampler 4","description":"Having released consistently highly acclaimed discs by musicians such as The Allegri Quartet, Iona Brown with The Norwegian Chamber Orchestra, Havard Gimse and Yuval Yaron, Naim decided that it was time to release one of their famous sampler discs featuring the classical music in their catalogue.\u003cbr\u003e\u003cbr\u003eFeaturing all the above artists and more, the first classical sampler is a unique collection of pieces by composers whose work spans the centuries including Veracini, Schubert, Beethoven and Gates.\u003cbr\u003e\u003cbr\u003eThe high quality of recording and sound is as good as the discs from which the nine tracks were taken, making this a perfect entry point into the classical releases on The Naim Label.","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407237259596,"sku":"naimcd061","price":4.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimcd061.jpg?v=1777455759"},{"product_id":"naim-label-sampler-3","title":"Naim Label Sampler 3","description":"Nine more superb contemporary and jazz tracks from Naim Label artists including Thea Gilmore, Guilherme Vergueiro and Carlos dos Santo, Fred Simon, Antonio Forcione, Ted Sirota's Rebel Souls, Janvier Jones, Charlie Haden and Mike Melvoin, Union, and Kai Eckhardt.","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407239258444,"sku":"naimcd056","price":4.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimcd056.jpg?v=1777455763"},{"product_id":"naim-label-sampler-2","title":"Naim Label Sampler 2","description":"Featuring nine fantastic tracks from highly acclaimed Naim Label releases, this sampler provides a superb representation of the jazz and contemporary discs available from artists that include Antonio Forcione, Sabina Sciubba with Antonio Forcione, Ted Sirota's Rebel Souls, Union, Tom Gullion, Patrick Noland, Chris Anderson \u0026amp; Sabina Sciubba, Acoustic Manaia, and Leo Green.","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407239291212,"sku":"naimcd042","price":4.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimcd042.jpg?v=1777455766"},{"product_id":"naim-label-sampler-1","title":"Naim Label Sampler 1","description":"This special sampler features nine specially chosen tracks from albums currently available on the Naim Label and features the music of Acoustic Mania, Charlie Haden and Chris Anderson, Gary Boyle, Patrick Noland, Ted Sirota's Rebel Souls, Antonio Forcione, Union (Hobgood, Torff \u0026amp; Wertico), and SFX.","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407239323980,"sku":"naimcd023","price":4.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimcd023.jpg?v=1777455770"},{"product_id":"naim-label-true-stereo-sampler","title":"Naim Label True Stereo Sampler","description":"This disc features recordings by Jim Gailloreto's Split Decison, Laurence Hobgood, Stew Cutler, Fred Simon, Ted Sirota's Rebel Souls, Charlie Haden \u0026amp; John Taylor, Union, Bonnie Koloc, John Moulder \u0026amp; Ken Hall, Patrick Noland, Tom Gullion, and John Moulder.\u003cbr\u003e\u003cbr\u003eThis very special sampler is a celebration of the TRUE STEREO process for recording Naim have used for the majority of their releases over the last ten years. What Naim call “True Stereo” is, what they believe to be one of the most faithful techniques that exists to capture music in a recorded format. The final sound results from recoding with just a single pair of microphones set up in a space with good natural acoustics.\u003cbr\u003e\u003cbr\u003eThe end result offers the listener a ‘live’, acoustically realistic perspective on the music without processing or electronic manipulation of any kind. Because the sound is recorded direct to stereo, there is no opportunity for mixing or manipulating it after the recording has been made.\u003cbr\u003e\u003cbr\u003eThe positioning of the microphones is critical for this kind of recording: microphone placement represents the only opportunity that Naim's engineer, Ken Christianson, has to adjust the levels. For example, more or less bass is achieved by positioning the bassist closer to or further from the microphones.\u003cbr\u003e\u003cbr\u003eKen’s techniques – developed over a period of many years – are illustrated in the booklet which accompanies the True Stereo Sampler. There are diagrams showing the placement of instruments and microphones, and details on the specific sound characteristics of the room that was used for the recording.\u003cbr\u003e\u003cbr\u003eThe Naim Label concept is, and always has been, to produce recordings which are of outstanding performances. As a record label, Naim do not try to influence the artists that they record musically. Naim believe that far better results can be achieved by allowing them total freedom to follow their own artistic instincts.","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407239520588,"sku":"naimcd080","price":4.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimcd080.jpg?v=1777455774"},{"product_id":"fred-simon-remember-the-river-lp","title":"Fred Simon: Remember the River LP","description":"Remember The River is Fred Simon's eagerly awaited second album for The Naim Label. It sees Fred in a trio setting once again, this time accompanied by the musical alchemists Paul McCandless on reeds and Steve Rodby on double bass.\u003cbr\u003e\u003cbr\u003eFred wrote each track on the disc, injecting his sense of beautiful musicality into every inch of the score. The piano sounds as light as a feather under his touch, the bass a perfect complement in Steve's hands. Paul's floating and innovative sound has the effect of transporting the whole composition to a higher plane.\u003cbr\u003e\u003cbr\u003eFor years, Paul has played with the relentlessly innovative group, Oregon, winning many awards and nominations for his playing. He is a talented multi-instrumentalist, as can be seen by reading his list of involvement on Remember The River. \u003cbr\u003e\u003cbr\u003eBassist and co-producer of the Pat Metheny Group, Steve Rodby has won several Grammys for his work. His rapport with the bass is second to none, easily coaxing out a deep and wondrously rich sound; smooth yet authoritative. \u003cbr\u003e\u003cbr\u003eThis LP is a True Stereo recording by Ken Christianson. It was recorded live with two microphones.","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407239684428,"sku":"naimlp086LP","price":14.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naim_lp081.jpg?v=1777455778"},{"product_id":"the-music-collection-lp-1","title":"The Music Collection LP 1","description":"The Music Collection Volume 1 is the first in a series of 180gm virgin vinyl LPs featuring music taken from the Naim Label catalogue. Selected to produce a beautiful sounding smoothly flowing record, Music Collection Volume 1 will be appreciated and cherished by all music and vinyl fans.\u003cbr\u003e\u003cbr\u003eThis LP features music by:\u003cbr\u003eCharlie Haden and Chris Anderson:\"Find it, buy it, cherish it\" - Stereophile\u003cbr\u003e\u003cbr\u003eAntonio Forcione and Sabina Sciubba: \"Dynamic, beautifully expressive playing and superb recording\" - What Hi Fi\u003cbr\u003e\u003cbr\u003eAntonio with Neil Stacey: \"diverse talents complement and contrast one another. Essential\" - Jazz Rag\u003cbr\u003e\u003cbr\u003eUnion: \"original yet accessible, melodically free flowing yet lucidly structured\" - Chicago Tribune\u003cbr\u003e\u003cbr\u003eGuilherme Vergueiro and Carlos dos Santos: \"Whose sole intent seems to be to lift your spirits with their magnificent artistic gift\" - Jazz Times\u003cbr\u003e\u003cbr\u003eFred Simon: \"delightfully cool and laid-back\" - Hi Fi Plus","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407239782732,"sku":"naimlp070","price":10.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naim_lp070.jpg?v=1777455782"},{"product_id":"charlie-haden-and-john-taylor-nightfall-lp","title":"Charlie Haden and John Taylor: Nightfall LP","description":"The Naim Label has once again achieved the significant coup of recording with one of the world's best known and most respected double bassists in the world, Charlie Haden. Continuing our tradition of pairing this legend of free-jazz double-bass with whoever he wishes to play with, the great British jazz pianist John Taylor was this time top of Charlie's list.\u003cbr\u003e\u003cbr\u003eAs equally respected as Charlie, John is probably best known for his work with the ECM label, having founded his trio Azimuth in the late 70s with Norma Winstone and Kenny Wheeler. John is currently a member of Kenny Wheeler's quartet and large ensemble, and performs in duo and quartet settings with John Surman.\u003cbr\u003e\u003cbr\u003eNightfall is an album of musical beauty; an uplifting combination of John's dancing fingers and Charlie's trademark resounding bass and finger slaps. The tracks are all by Charlie or John, with the exception of \"My Love and I\" a love song from \"Apache\" and a composition from Williams Walton's orchestral suite for Laurence Olivier's Henry V, \"Touch Her Soft Lips\"\u003cbr\u003e\u003cbr\u003eAlong with previous recordings Naim have done with Charlie \"None But The Lonely Heart\" (Naim CD022) and \"The Capitol Sessions\" (Naim CD025,) \"Nightfall\" promises to be a wonderful album of the same calibre. \u003cbr\u003e\u003cbr\u003eNightfall is a celebration of the musical simplicity that comes from recording the double-bass and piano live to a two track stereo tape recorder. Every tone and phrase is there, from John's improvisation through plucking the piano strings on \"Chairman Mao\" to Charlie's beautiful yet eerie bowing on \"Song For The Whales\"\u003cbr\u003e\u003cbr\u003eNightfall is also available on Compact Disc (NaimCD077).","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407240077644,"sku":"NaimLP078","price":14.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimlp078.jpg?v=1777455789"},{"product_id":"naim-label-laurence-hobgood-trio-crazy-world","title":"Naim Label Laurence Hobgood Trio: Crazy World","description":"The Laurence Hobgood Trio have perfected their craft through playing with US jazz vocalist Kurt Elling, who appears on two tracks on Crazy World, the trio’s debut album.\u003cbr\u003e\u003cbr\u003eLaurence is no stranger to The Naim Label, having recorded several highly acclaimed albums under it.\u003cbr\u003eHis beautifully light touch is a joy to listen to; fingers which dance over the keys proving to be the perfect third element for bass and drums. Laurence’s pianism with its shimmering arpeggios, advanced harmonies and pervasively singing tone is vaguely reminiscent of Keith Jarrett or Bill Evans.\u003cbr\u003e\u003cbr\u003eFrank Parker’s elegant drumming together with Rob Amster’s fluid bass playing combine to produce jazz that is relaxed and distinguished, imprinted with an Olympic calm.\u003cbr\u003e\u003cbr\u003eThe ten tracks on the album are a mixture of Laurence’s original compositions and his own arrangements, with one track by Rob Amster.\u003cbr\u003e\u003cbr\u003eSix times Grammy nominee Kurt Elling makes a guest appearance to provide delicate vocal inspiration on two tracks recorded exclusively for this album.\u003cbr\u003e\u003cbr\u003eCrazy World is another addition to the label’s True Stereo catalogue. It was recorded by Ken Christianson direct to two track Nagra tape machine.","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407251513676,"sku":"NaimCD084","price":10.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimcd084.jpg?v=1777455873"},{"product_id":"naim-label-antonio-forcione-tears-of-joy","title":"Naim Label Antonio Forcione: Tears of Joy","description":"This new disc features The Antonio Forcione Quartet, which includes Antonio on guitars, Jenny Adejayan playing cello, Igor Outkine on accordion, and Adriano Adewale on percussion. It also includes a number of special guests such as Ronu Majumdar on bansuri, Alex Wilson on piano, Micheline van Hautem on vocals, Nathan Thomson on double bass, and Enzo Zirilli playing drums and percussion.\u003cbr\u003e\u003cbr\u003eAll the music on Tears of Joy was written, arranged and produced by Antonio Forcione and recorded by Martin Levan.","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407252169036,"sku":"NaimCD087","price":10.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimcd087.jpg?v=1777455877"},{"product_id":"naim-snaic-interconnect","title":"Naim SNAIC Interconnect","description":"The new improved Black SNAICs use a new cable, which is custom manufactured to Naim's specification, that provides superior impedance, capacitance and conductivity. Each interconnect is meticulously hand-built in-house using newly developed techniques. The result is more - more music.","brand":"Naim Audio","offers":[{"title":"4 to 4 Pin Din - 1.25m","offer_id":57407261213004,"sku":"NAIMSNAIC4to4-1.25","price":157.5,"currency_code":"GBP","in_stock":true},{"title":"5 to 5 Pin Din - 1.25m","offer_id":57415978516812,"sku":"NAIMSNAIC5TO5PINDIN-1.25","price":157.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naim_snaic.jpg?v=1777455941"},{"product_id":"naim-nac-a5-loudspeaker-cable","title":"Naim NAC A5 Loudspeaker Cable","description":"Connections between all the components, including those to the loudspeakers, are crucial to any audio system’s performance.\u003cbr\u003e\u003cbr\u003eNACA5 is Naim's multi-strand loudspeaker cable, consisting of two separated 4mm square conductors. Its design is optimised for use with Naim amplifiers and loudspeakers by ensuring that its capacitance, inductance and resistance are entirely compatible.\u003cbr\u003e\u003cbr\u003eNaim strongly recommend its use, along with their right-angled, twin loudspeaker plugs, which provide a safe, convenient and very effective connection. Even their plating has been the subject of research and development work.","brand":"Naim Audio","offers":[{"title":"Naim NAC A5 (per\/m) - Black","offer_id":57407261376844,"sku":"NAIMNACA5B","price":29.17,"currency_code":"GBP","in_stock":true},{"title":"Naim NAC A5 (per\/m) - White","offer_id":57415980155212,"sku":"NAIMNACA5W","price":29.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Naim-NAC-A5-Interconnect-1.jpg?v=1779967133"},{"product_id":"naim-fraim-support-system-base","title":"Naim Fraim Support System - Base","description":"The Fraim equipment support system has been carefully designed to provide the perfect platform for Naim electronics to shine. Each level is carefully isolated from the next using a cup-and-cone interface. An additional, double-layer base platform provides further isolation from resonance. A toughened glass sub-shelf rests on minimal-contact ball decouplers, providing even more isolation.\n\nFrom the stainless steel spikes, which complete the process of isolation, to the zinc-plated steel nuts and studs that tie everything together, each individual component of the Fraim has been selected for its effect on sound quality. You’d expect nothing less from Naim.\u003cbr\u003e\u003cbr\u003e\n\n\n—  Fraim platforms available in Cherry, Natural Ash and Black finishes\u003cbr\u003e \n—  Extruded, anodised aluminium Fraim legs available in three heights, and in silver or black finishes \u003cbr\u003e\n—  Modular design allows for system expansion over time \u003cbr\u003e\n—  Fully decoupled structure with inter-level cup-and-cone interfaces and toughened glass sub-shelf supported on ball bearings \u003cbr\u003e\n—  Double-layer base level plus stainless steel floor spikes for maximum isolation \u003cbr\u003e\n—  Optimised shelf spacing to reduce magnetic interaction between components \u003cbr\u003e\u003cbr\u003e\n\nThe development of the Fraim marked the first time the full engineering resources of a high-end audio manufacturer had been deployed in the design of an equipment stand. The Fraim brings more detail, pace and focus to music, working in harmony with the Naim philosophy that makes the fundamentals of music – pitch, timing and dynamics – the priorities.\u003cbr\u003e\u003cbr\u003e\n\nThe Fraim principle is that successive minimal contact interfaces progressively decouple the transmission of mechanical energy. This includes the micro-vibrations created when products are immersed in a sound field and those generated by all products while operating, including power supplies. At the same time the interfaces provide a fixed reference plane on which the internal isolation systems of each item of electronics can perform optimally. Additionally, the shelf height options are configured to ensure that magnetic field interaction between electronic products is minimised.\u003cbr\u003e\u003cbr\u003e\n\nFraim material selection is as significant as the arrangement of its components. Super hard stainless steel, toughened glass selected following intensive listening tests, large section anodised aluminium extrusion and veneered wood composites all contribute to equipment support that both performs to perfection and perfectly complements the Naim aesthetic.\u003cbr\u003e\u003cbr\u003e\n\nSpecifications:- \u003cbr\u003e\n\nLevel Height: \u003cbr\u003e \nStandard level 175 mm \u003cbr\u003e \n Medium level 250 mm \u003cbr\u003e \n Tall level 324 mm \u003cbr\u003e           \n Base level 155 mm\u003cbr\u003e\n (all inc. glass shelf)\u003cbr\u003e\u003cbr\u003e\n \nAvailable Height (per level): \u003cbr\u003e \nStandard level 105 mm\u003cbr\u003e\n Medium level 180 mm\u003cbr\u003e\n Tall level 254 mm\u003cbr\u003e\u003cbr\u003e \n \nShelf Dimensions : \u003cbr\u003e\nGlass Shelf 452 x 340 mm (W x D)\u003cbr\u003e\u003cbr\u003e\n \nOverall Dimensions: \u003cbr\u003e \n643 x 442 mm (W x D)\u003cbr\u003e\u003cbr\u003e\n \nWeight: \u003cbr\u003e\nStandard level 7 kg \u003cbr\u003e\n Medium level 5.6 kg \u003cbr\u003e       \n Tall level 8.25 kg \u003cbr\u003e         \n Base level 8.6 kg\u003cbr\u003e\u003cbr\u003e\n \nShipping Weight: \u003cbr\u003e \nStandard level 9 kg\u003cbr\u003e      \n Base level 10.75 kg\u003cbr\u003e\n Medium level 9.65 kg\u003cbr\u003e\n Tall level 10.4kg\u003cbr\u003e\u003cbr\u003e\n \n\nFinish - Shelves - Ash, Cherry, Black Ash\u003cbr\u003e\n \nUprights -  Natural anodised, Black anodised\n \n\n\n\n\n\n\n\n\nShelves  \nAsh, Cherry, Black Ash\n \nUprights  \nNatural anodised, Black anodised\n \n\n","brand":"Naim Audio","offers":[{"title":"Naim Fraim Base  - Black","offer_id":57407261704524,"sku":"NAIMFRAIMBASE-B","price":790.83,"currency_code":"GBP","in_stock":true},{"title":"Naim Fraim Base - Cherry","offer_id":57415980515660,"sku":"NAIMFRAIMBASE-C","price":790.83,"currency_code":"GBP","in_stock":true},{"title":"Naim Fraim Base - Ash","offer_id":57415981662540,"sku":"NAIMFRAIMBASE-A","price":790.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Naim-Fraim-Base-Cherry3.jpg?v=1777455950"},{"product_id":"naim-napsc-power-supply","title":"Naim NAPSC power supply","description":"The NAPSC comes as standard with the NAC 282 pre-amplifier and can be bought as an upgrade for the NAC 202. \u003cbr\u003e\u003cbr\u003eThe NAPSC then supplies all the digital circuitry used for the pre-amplifier switching. \u003cbr\u003eThe NAPSC can also be used to power the Headline headphone amplifier.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003ePower output 18V\u003cbr\u003eMains supply 100V, 115V, 230V (50 or 60Hz)\u003cbr\u003eDimensions (H x W x D) 57 x 121 x 187mm\u003cbr\u003eFinish Black","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407262097740,"sku":"NAIMNAPSC","price":332.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimnapsc.jpg?v=1777455959"},{"product_id":"naim-hicap-dr-power-supply","title":"Naim HiCap DR Power Supply","description":"Although certain Naim amplifiers provide a very adequate power supply to the partnering pre-amplifier, the use of a separate Naim ultra-low noise power supply brings substantially improved musicality to the whole system. Simply being separate from the amplifiers ensures correct earthing and hum-free operation, while the large toroidal transformer and generous high quality smoothing capacitors provide exceptional dynamic stability.\u003cbr\u003e\u003cbr\u003eEach of the power outputs use specially selected regulators for optimum performance. The Hi-Cap can be used to power all of the Naim phono stages, active crossovers and pre-amplifiers except the NAC 552 and NAC 252; in the case of the NAC 282 pre-amplifier a second Hi-Cap may be used, bringing further improvements.\u003cbr\u003e\u003cbr\u003eThe addition of anti-vibration, resonance-controlling feet compliment the elegant new cast and extruded anti-magnetic chassis to protect the sensitive internal components from resonance and microphonic vibration.\u003cbr\u003e\u003cbr\u003eThe audible benefits from adding a Hi-Cap are fundamental to the music: improving timing, dynamic range, clarity and order. Particularly complex music becomes both easier to understand and listen to. Inclusion of a Hi-Cap offers the additional benefit of allowing the pre-amplifier to be left switched on constantly, independently of the power amplifier, keeping the unit's complex circuitry fully stabilised at all times.\u003cbr\u003e\u003cbr\u003eUltra-low noise pre-amplifier and electronic crossover power supply. Huge toroidal transformer and smoothing capacitors provide exceptional dynamic stability. The new Naim Hi-Cap sets free the musicality and dynamic range of a hi-fi system, making an incredibly effective upgrade to a pre-amplifier, power amplifier combination.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003ePower output Dual 24V\u003cbr\u003eMains supply 100V, 115V, 230V (50 or 60Hz)\u003cbr\u003eDimensions (H x W x D) 87 x 207 x 314mm\u003cbr\u003eFinish Black","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407262687564,"sku":"NAIMHICAP","price":1332.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimhicap.jpg?v=1777455967"},{"product_id":"naim-xps-dr-power-supply","title":"Naim XPS DR Power Supply","description":"The importance of power supplies has been close to the heart of Naim philosophy for over twenty years.\u003cbr\u003eNaim research proved that divorcing the main power supply from a CD player is wholly beneficial, whereas the more common arrangement of housing the converter circuitry in a separate box causes many problems.\u003cbr\u003e\u003cbr\u003eThe Naim XPS power supply is a very sophisticated power supply with six separately regulated, very low noise outputs, featuring a toroidal transformer and six power regulators. These supplies are branched and re-regulated, some twice in the CD player.\u003cbr\u003e\u003cbr\u003eThe addition of anti-vibration, resonance-controlling feet compliment the elegant new cast and extruded anti-magnetic chassis protect the sensitive internal components from resonance and microphonic vibration.\u003cbr\u003e\u003cbr\u003eThis supply is required and comes as standard with the CDS3 but can also be added to the CDX2 CD player, providing a substantial improvement in sound quality and a possible upgrade path from one player to another.\u003cbr\u003e\u003cbr\u003eTiming, dynamic range and clarity all significantly improve by adding a Naim XPS to a CDX2. Complex passages become more understandable, bringing far more involvement and enjoyment from the music.\u003cbr\u003e\u003cbr\u003eUltra-low noise CD player power supply.\u003cbr\u003eHuge toroidal transformer and smoothing capacitors provide exceptional dynamic stability. Six power regulators feeding six completely separately regulated power outputs. The new Naim XPS sets the music free, making it an incredibly effective upgrade to the Naim CDX2, and a critical component of the Naim CDS3.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003ePower output ± 22V, ± 10V, 2 x 15V\u003cbr\u003eMains supply 100V, 115V, 230V (50 or 60Hz)\u003cbr\u003eDimensions (H x W x D) 87 x 432 x 314mm\u003cbr\u003eFinish Black","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407262818636,"sku":"NAIMXPS","price":3665.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimxps2.jpg?v=1777455972"},{"product_id":"naim-supercap-dr-power-supply","title":"Naim SuperCap DR Power Supply","description":"Although certain Naim amplifiers provide a very adequate power supply to the partnering pre-amplifier, the use of a separate Naim ultra-low noise power supply brings substantially improved musicality to the whole system. Simply being separate from the amplifiers ensures correct earthing and hum-free operation, while the large toroidal transformer and generous high quality smoothing capacitors provide exceptional dynamic stability.\u003cbr\u003e\u003cbr\u003eEach of the multiple power outputs use specially selected regulators for optimum performance. The Super-Cap can be used to power all of the Naim pre-amplifiers (except the NAC 552), phono stages and active crossovers and is the only choice for supplying power to the NAC 252 pre-amplifier.\u003cbr\u003e\u003cbr\u003eThe addition of anti-vibration, resonance-controlling feet compliment the elegant new cast and extruded anti-magnetic chassis to protect the sensitive internal components from resonance and microphonic vibration.\u003cbr\u003e\u003cbr\u003eThe audible benefits from adding a Super-Cap are fundamental to the music: improving timing, dynamic range, clarity and order. Particularly complex music becomes both easier to understand and listen to. Inclusion of a Super-Cap offers the additional benefit of allowing the pre-amplifier to be left switched on constantly, independently of the power amplifier, keeping the unit's complex circuitry fully stabilised at all times.\u003cbr\u003e\u003cbr\u003eUltra-low noise pre-amplifier and electronic crossover power supply.\u003cbr\u003eHuge toroidal transformer and smoothing capacitors provide exceptional dynamic stability. The new Naim Super-Cap sets free the musicality and dynamic range of a hi-fi system, making an incredibly effective upgrade to a pre-amplifier\/power amplifier combination.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003ePower output 24V\u003cbr\u003eMains supply 100V, 115V, 230V (50 or 60Hz)\u003cbr\u003eDimensions (H x W x D) 87 x 432 x 314mm\u003cbr\u003eFinish Black","brand":"Naim Audio","offers":[{"title":"Naim SuperCap DR","offer_id":57407263113548,"sku":"NAIMSUPERCAP","price":4165.83,"currency_code":"GBP","in_stock":true},{"title":"Naim SuperCap - 2nd User","offer_id":57415986938188,"sku":"NAIMSUPERCAPSH","price":3291.67,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimsupercap.jpg?v=1777455976"},{"product_id":"naim-4mm-banana-speaker-plugs","title":"Naim 4mm Banana Speaker Plugs","description":"Naim right-angled, twin loudspeaker plugs, which provide a safe, convenient and very effective connection. Even their plating has been the subject of research and development work.","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407523389772,"sku":"NAIM4MMPLUG","price":12.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naim_spkr_plugs.jpg?v=1777458139"},{"product_id":"naim-hi-line-interconnect","title":"Naim Hi-Line Interconnect","description":"During the development of the CD555, a special project ran in parallel; to develop a new signal cable which would exceed the performance of Naim’s standard cable.\u003cbr\u003e\u003cbr\u003eThe brief was to investigate all parameters of a signal carrier: to improve the whole rather than just improving the cable as is the more normal development practice.\u003cbr\u003e\u003cbr\u003eGiven the opportunity to start with a ‘clean sheet’ the R\u0026amp;D team decided to develop a much improved plug as well as a new cable.\u003cbr\u003e\u003cbr\u003eThe Air-PLUG (patent pending) is designed as a decoupling device to stop vibrations from one product being transmitted, via the cable, to another product and to stop airborne vibrations being picked up by the cable being transmitted to the products it is connected to.\u003cbr\u003e\u003cbr\u003eThe many different rear sections of the Air-PLUG are clipped together to form a lossy flexible section. The cable is clamped compliantly to the end of this flexible section. Other detail elements of the Air-PLUG include: a significantly reduced metal content to lower electromagnetic effects; a design to reduce eddy current effects and a cable clamping mechanism that doesn’t squash the cable and affect the impedance.\u003cbr\u003e\u003cbr\u003eThe hiline cable also benefited from a complete rethink. It had to be low capacitance, low resistance and flexible. It had to work superbly in DIN to DIN connections but it also had to perform when used in other configurations.\u003cbr\u003e\u003cbr\u003eThe cable, exclusive to Naim, is manufactured from twisted pairs of 80 litz conductors surrounded by PTFE, Kapton and PTFE tape all then covered by a semi conductive shield to reduce static charges. This is then wrapped by two spiral wound copper shields and lapped PTFE tape. Two of these assemblies side by side are then wrapped in layers of PTFE tape and finally a rubber outer covering. This gives a two-channel cable where the signal and RF grounds are held in a static position relative to each other negating any difference in field between them.","brand":"Naim Audio","offers":[{"title":"4 Pin DIN to 5 Pin DIN - 1.25m","offer_id":57407524864332,"sku":"NAIMHILINE14\/5pindin-1.25","price":699.17,"currency_code":"GBP","in_stock":true},{"title":"5 Pin DIN to 5 Pin DIN - 1.25m","offer_id":57416325235020,"sku":"NAIMHILINE15\/5-1.25","price":699.17,"currency_code":"GBP","in_stock":true},{"title":"4 Pin DIN to RCA - 1.25m","offer_id":57416325267788,"sku":"NAIMHILINE1RCA5","price":699.17,"currency_code":"GBP","in_stock":true},{"title":"5 Pin DIN to RCA - 1.25m","offer_id":57416325300556,"sku":"NAIMHILINE5pintorca-1.25","price":699.17,"currency_code":"GBP","in_stock":true},{"title":"5 to 5 Pin DIN - 2.5m","offer_id":57416326316364,"sku":"NAIMHILINE5TO5PINDIN-2.5","price":874.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naimhiline.jpg?v=1777458207"},{"product_id":"naim-supernait-2-reference-integrated-amplifier","title":"Naim SUPERNAIT 2 Reference Integrated Amplifier","description":"\u003cp\u003eThe Naim SUPERNAIT 2 combines a muscular 80 Watts per channel power amplifier with six analogue inputs. In terms of both performance and hardware, it is conceptually as close as it is possible to get to separate pre and power amps in one box. It borrows advanced technology from Naim’s flagship preamplifiers, the NAC 552, and in employing the latest Naim DR (Discrete Regulator) techniques in its power supply, sits right at the forefront of Naim amplifier technology. It is also constructed in the classic Naim full height extruded aluminium enclosure.\u003c\/p\u003e\n\u003cp\u003eWith an improved power supply, revised electronic design, upgraded components and a new 1\/4\" (6.35mm) front panel headphone output. At 80W per channel it remains powerful enough to drive even the most demanding loudspeakers. Its full Naim preamplifier section doubles as a Class-A headphone amplifier and is further improved with the introduction of Naim DR (Discrete Regulator) technology. Its input sockets are now all individually decoupled and hand-wired to maximise fidelity and take integrated amplifier performance to new heights.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003cbr\u003e80W per channel (in 8 ohms), 130W per channgel (into 4 ohms)\u003cbr\u003eBuilt in Naim DR (Discrete Regulator) supplying preamplifier section\u003cbr\u003e¼? (6.35mm) headphone output and high-quality Class-A headphone amplifier\u003cbr\u003eConstant current source circuit technique employed (introduced in NAC 552 preamplifier) to provide ultra-quiet drive signals for relays to improve sound quality\u003cbr\u003eAll inputs are individually decoupled and hand-wired for improved microphonic isolation (as per NAC 282 upwards)\u003cbr\u003eCeramic heat sink isolation for improved sound quality on power and preamp section\u003cbr\u003ePerformance upgradable via Naim FlatCap, HiCap or SuperCap power supplies\u003cbr\u003ePowered input for use with StageLine or SuperLine phono stages\u003cbr\u003eUSB-mini B for future software upgrades\u003cbr\u003eBritish build and design\u003c\/p\u003e","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57407679037772,"sku":"NAIMSUPERNAIT2","price":2707.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naim-supernait-2-front.jpg?v=1777459735"},{"product_id":"naim-superline-reference-phono-amplifier","title":"Naim SuperLine Reference phono amplifier","description":"Vinyl replay makes a huge contribution to the enjoyment of recorded music. At its best, vinyl has a uniquely engaging and musical quality, and with the launch of the SuperLine phono amplifier, the best of vinyl has just got better.\u003cbr\u003e\u003cbr\u003eThe SuperLine is a very high performance moving-coil phono amplifier built in the Naim signature extruded and brushed aluminium reference enclosure. It brings all Naim's latest analogue electronic design and environmental isolation techniques to bear on the most delicate analogue element of any hi-fi system is the moving-coil phono signal.\u003cbr\u003e\u003cbr\u003eThe heart of the SuperLine is a new, two stage single-ended Class A discrete amplifier with part-passive RIAA filtering that runs off 25 internally regulated power supplies and features the transistor “quiet room” thermal isolation technique originally developed for the NAP 500 power amplifier. Environmental isolation is also ensured by the SuperLine's massive sub-chassis and high-Q spring suspension system — the first time on a phono amplifier.\u003cbr\u003e\u003cbr\u003eThe SuperLine requires an external power supply either from the power supply output of a Naim preamplifier or the SUPERNAIT integrated amplifier, or, for optimum performance, a dedicated FlatCap, HiCap or SuperCap. Duplicate phono and BNC sockets provide input versatility, and cartridge impedance matching adjustment is provided by four resistive and three capacitive load plugs. In combination with the SuperLine's internal input load, twenty different standard load combinations are possible.\u003cbr\u003e\u003cbr\u003eSuperLine brings out all that's best in vinyl replay — timing, pitch accuracy, clarity, detail, and the unmistakable warmth that records can deliver in abundance.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSpecifications:\u003cbr\u003eCartridge compatibility 100µV to 500µV\u003cbr\u003eGain 64dB @ 1kHz\u003cbr\u003eSignal to Noise 82dB ref 500µV input, 0O (A-weighted)\u003cbr\u003eDistortion \u0026lt; 0.005% (500µV @ 1kHz)\u003cbr\u003eFrequency response 10Hz to \u0026gt;200kHz -3dB\u003cbr\u003eRIAA accuracy + 10Hz HPF ±0.1dB (20Hz to 20kHz)\u003cbr\u003eCrosstalk \u0026gt;80dB (20Hz to 20kHz)\u003cbr\u003eMax output 7.5V rms (21V pk-pk)\u003cbr\u003eInput overload 5mV rms (1kHz)\u003cbr\u003eWeight 7.7kg\u003cbr\u003eInput load options 10kO, 500O, 220O, 100O (resistive)\u003cbr\u003e1nF, 2nF, 6nF, 11nF (capacitive)\u003cbr\u003eDimensions (H x W x D): 87 x 207 x 314mm","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57408263192908,"sku":"NAIMSUPERLINE","price":2249.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naim_superline.jpg?v=1777465989"},{"product_id":"naim-powerline-mains-cable","title":"Naim PowerLine Mains Cable","description":"With the launch of Naim's first custom designed and manufactured mains cable system, the most fundamental of all audio hardware items has hit centre stage. The Power-Line consists of a mains plug, a mains cable and an IEC connector. Each element incorporates features never before seen in an audio mains cable, and, like Naim's Hi-Line interconnect cable, the Power-Line represents a genuine advance in high-end audio engineering.\u003cbr\u003e\u003cbr\u003eThe Power-Line's unique design is the result of hundreds of hours of experimentation, research and listening aimed at identifying and optimising the critical elements of audio mains power cables. Mechanical energy transmission, eddy current propagation and conductivity factors were all identified and numerous steps taken within the design to eliminate any negative influence.\u003cbr\u003e\u003cbr\u003eThe Power-Line mains plug features a thermoset resin case carrying floating pins that align for enhanced contact area. The stripped cable ends are secured by specially profiled clamp screws and the cable is both decoupled and clamped by an ingenious die-cast component that includes measures to suppress case eddy currents.\u003cbr\u003e\u003cbr\u003eThe Power-Line cable itself is custom manufactured with 4mm² cross section copper conductors, individual dielectric insulation chosen for its sound enhancing electrical properties, and a final rubber outer that provides both high levels of inherent mechanical damping, and the correct stiffness to aid dressing on installation.\u003cbr\u003e\u003cbr\u003eCompleting the Power-Line is an IEC inlet plug that continues many of the decoupling and electrical continuity themes of the mains plug. It features floating contacts, combined decoupling and clamping, double wiper contacts and case eddy current suppression.\u003cbr\u003e\u003cbr\u003eThe Power-Line brings gains in all areas of system performance with its influence increasing as it is used on each component in a system. It represents a striking and significant upgrade for all Naim hi-fi systems. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e* Conductors 4mm², Copper, 3-core twisted\u003cbr\u003e* External Diameter 8.8mm\u003cbr\u003e* Approvals UL 20841\u003cbr\u003e* Standard length 2.0m\u003cbr\u003e* Naim Mains Plug Manufactured \u0026amp; Approved to BS1363-1\u003cbr\u003e* Naim IEC Connector Tested \u0026amp; Certified to EN60320-1 ","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57408263258444,"sku":"NAIMPOWERLINE","price":499.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naim_powerline.jpg?v=1777465994"},{"product_id":"naim-nait-xs-integrated-amplifier","title":"Naim NAIT XS Integrated Amplifier","description":"The amplifier is a hi-fi system's heart and the Naim NAIT XS integrated amplifier beats fast and strong. The Naim NAIT XS has but one purpose: to deliver dynamic, detailed, emotional and satisfying music. It takes the DNA of our best-ever integrated amplifier, the Naim SUPERNAIT, and, like a sports car stripped back to essentials for the track, delivers musical performance that truly excites and inspires.\u003cbr\u003e\u003cbr\u003e\n\nThe Naim NAIT XS integrated amplifier shares both its preamplifier and power amplifier design with the SUPERNAIT. The 60 Watts per channel power amplifier is a dynamic, fast acting musical muscle with an uncanny talent for bringing speakers to life. And the preamplifier, like the SUPERNAIT's, provides all the musical clarity and detail you could wish for. The Naim NAIT XS preamplifier versatility comes from six analogue line inputs on a mix of DIN and phono sockets and a front-panel mounted auto-switching mini-jack.\u003cbr\u003e\u003cbr\u003e\n\nThe Naim NAIT XS versatility extends also to the inclusion of a subwoofer output, a phono preamplifier power output, a preamplifier output and power amplifier input, automatic input switching and an AV bypass option for simple integration with AV processors. The Naim NAIT XS power supply upgrade is also possible through the addition of a FlatCap, HiCap or SuperCap to take over preamplifier power supply duties and lift performance yet higher.\u003cbr\u003e\u003cbr\u003e\n\nInside the Naim NAIT XS is the latest expression of Naim amplifier design philosophy - a philosophy that can trace routes right back to our earliest products. It features a massive 380VA mains transformer with five secondary windings. Separate power supplies for pre and power amplifier sections, and the highest quality best-sounding components in every critical location.\u003cbr\u003e\u003cbr\u003e\n\nBuilt in a version of our innovative low resonance, non-magnetic slimline case, the Naim NAIT XS exemplifies the Naim approach to audio: focused, technologically innovative, aesthetically elegant and musically satisfying. The NAIT XS is genuine high-end hi-fi brought within reach.\u003cbr\u003e\u003cbr\u003e\n\nSeries 5 Aluminium chassis and sleeve with zinc die-cast front panel.\u003cbr\u003e\nUpgradeable with FlatCap, HiCap or SuperCap power supplies.\u003cbr\u003e\nSix line inputs: 4 x RCA\/DIN, 1 x RCA\/3.5mm jack, 1 x powered input for phono stage.\u003cbr\u003e\nAuto switching 3.5mm stereo jack socket for iPod\/MP3 player input on the front panel (mapped to Aux 1) to improve convenience.\u003cbr\u003e\nAux 2 power for phono stage.\u003cbr\u003e\n60WPC into 8 Ohm or 90WPC into 4 Ohm.\u003cbr\u003e\n380VA toroidal transformer with 5 separate windings: 2x power amp, 1 x preamp, 1 x display, 1 x relay switching.\u003cbr\u003e\nAV unity gain option (AV bypass switchable).\u003cbr\u003e\nFull bandwidth stereo subwoofer output.\u003cbr\u003e\nOptional bi-directional RS232 port for installation into 'smart homes'.\u003cbr\u003e\nPreamp similar to SUPERNAIT.\u003cbr\u003e\nCan be split to use as a preamplifier or power amplifier.\u003cbr\u003e\nRemote Controlled via Remote and System (RC5) in front (IR) and rear (3.5mm jack) for maximum control connectivity e.g. Custom Install.\u003cbr\u003e\nNARCOM Remote control for volume and input selection.\u003cbr\u003e\nProgrammable Auto Input Switching (AIS).","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57408511148364,"sku":"NAIMXS2","price":1041.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naim-nait-xs-2-front-angle.jpg?v=1777467279"},{"product_id":"naim-flatcap-xs-power-supply","title":"Naim FlatCap XS power supply","description":"The FlatCap XS is a dual-rail power supply that, either alone or in pairs, provides the most effective means to extract the ultimate performance from an XS system. One FlatCap XS can be used to enhance the performance of a CD5 XS and a NAT05 XS, while a second could be deployed to supercharge the performance of the NAC 152 XS preamplifier. The vital role played by the power supply in any hi-fi system is a long held Naim conviction and it has no better demonstration than the increased musical fluency that the FlatCap XS brings to a system. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSpecifications:\u003cbr\u003ePower output: 2 x 24V dual-rail feeds (to power 2 components)\u003cbr\u003eMains supply: 100-120V, 220-240V, 50 to 60Hz\u003cbr\u003ePhysical Dimensions (mm): 432 x 301 x 70 (W x D x H)\u003cbr\u003eWeight: 5.5kg\u003cbr\u003eShipping Weight: 7.5kg\u003cbr\u003eShipping Dimensions (mm): 580 x 500 x 200 (W x D x H)\u003cbr\u003eColour: Black\u003cbr\u003eFinish: Anodised fascia, painted cover","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57408594936140,"sku":"NAIMFLATCAPXS","price":832.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/flatcap_xs.jpg?v=1777469108"},{"product_id":"naim-unitiqute-2-all-in-one-player","title":"Naim UnitiQute 2 All-in-one Player","description":"Connect with your music like never before\u003cbr\u003eIt's a cliche we know, but good things come in small packages. The UnitiQute all-in-one audio player however isn't just good: it's a brilliant-sounding, uniquely versatile, seductively compact and, of course, irresistibly cute example of what contemporary music in the home is all about. Music downloads, high-resolution music files, internet radio, network music, UPnP servers, iPod\/MP3 players, Wi-Fi streaming - everything that the new era of music delivery can throw at it, UnitiQute can play.\u003cbr\u003e\u003cbr\u003eMusic for everyone\u003cbr\u003eJust like NaimUniti, its multi-award-winning sibling, UnitiQute is right at the forefront of modern music delivery technology, and its significance for music enthusiasts of all aspirations is far greater than the simple sum of its component parts. For the committed enthusiast with an existing Naim setup, UnitiQute can not only deliver exceptional Naim music-making as a second system, but also play the role of gateway to all the new digital music delivery formats - from USB memory sticks, UPnP streaming to internet radio. For the more casual listener, UnitiQute can take the place of both the old hi-fi system and the iPod dock, sound far better than either, and at the same time introduce new worlds of audio ripe for exploration.\u003cbr\u003e\u003cbr\u003eSmall box... Big on features\u003cbr\u003eFor starters, UnitiQute includes a preamplifier with two analogue inputs, five 24bit\/192kHz-capable digital inputs and all the traditional Naim musical clarity and transparency. Next, UnitiQute includes a muscular power amplifier that provides all the rhythmic punch and definition you would expect from Naim. You want conventional radio? Well, UnitiQute includes FM and DAB tuners that get the best possible performance from either format. UnitiQute is happy also to play music from an iPod or MP3 player via its front panel-mounted USB socket. The USB audio connection is digital so iPod sound quality is optimised, and Apple authenticated too so compatibility is seamless. And the same USB socket can be used to play music files in almost any format at up to 24bit\/96kHz resolution straight from a memory stick. And it doesn't end there. A network Ethernet socket and integrated Wi-Fi means that, along with everything else, UnitiQute can easily tap into Internet radio or UPnP servers, a Naim HDX for example, to drop almost unlimited music choices right into your lap. Talk about cute.\u003cbr\u003e\u003cbr\u003eEasy access to your music\u003cbr\u003eBringing everything audio, digital and analogue together is one thing, but making it all work seamlessly together is something else entirely. UnitiQute is controlled by a dedicated remote handset in combination with a large, clear display. The UnitiQute user interface borrows the principles of intuition and accessibility, and much of the substance, from the already proven NaimUniti interface. The interface is clear, intuitive, uncluttered and makes light work of access to UnitiQute's remarkable versatility and performance. And an iPhone\/iPod Touch Uniti control App, expected early in 2010 will enhance the UnitiQute experience still further and raise its brilliance yet another notch.\u003cbr\u003e\u003cbr\u003eThen there are the multi-room audio opportunities that UnitiQute opens up. With a UPnP server, a wireless network router and a UnitiQute you have a very high performance hi-fi system with access to almost limitless music. Add a second, or even a third UnitiQute and you have a multi-room hi-fi system that installs effortlessly, is easily modified and sounds outstanding.\u003cbr\u003e\u003cbr\u003eEnter the world of digital music\u003cbr\u003eStreaming\u003cbr\u003eUnitiQute can play audio files at resolutions up to 24bit\/96kHz streamed from UPnP music servers like the Naim HDX hard disk music player, or from PC or Apple Mac music libraries. And if you don't like the idea of running network cables around the house, don't worry. UnitiQute can do all this wirelessly.\u003cbr\u003e\u003cbr\u003eMulti-format Radio\u003cbr\u003eThe UnitiQute multi-format tuner can switch seamlessly between DAB, FM and Internet radio stations. Favourite stations are listed in a common interface menu for browsing and selection. An entire world of radio is a few button presses away.\u003cbr\u003e\u003cbr\u003eiPod and MP3\u003cbr\u003eConnect an iPod or MP3 player via the UnitiQute USB interface and its audio files and playlists are listed on the UnitiQute display for simple browsing, selection and playback.\u003cbr\u003e\u003cbr\u003eUSB-stored Audio\u003cbr\u003eConnect a USB memory stick to the front panel USB socket and the audio files it contains will be identified by the UnitiQute interface and be immediately available for browsing, selection and playback. UnitiQute can play USB-stored music files of up to 24bit\/96kHz resolution.\u003cbr\u003e\u003cbr\u003eYour complete audio system\u003cbr\u003eUnitiQute may be compact but it packs some serious audio technology within its elegant extruded and die-cast enclosure. On the analogue side, the UnitiQute preamplifier module is a distilled version of that found in its NaimUniti sibling. Similarly, and again, as with the NaimUniti, the UnitiQute power amplifier borrows its design from the NAIT 5i, and given a pair of Naim n-SAT speakers to work with, the music it makes is dynamic, tuneful and addictive.\u003cbr\u003e\u003cbr\u003eUnitiQute digital audio performance profits immeasurably from nearly two decades of high-end digital audio knowhow and experience at Naim. From the first CD player, the CDS in 1991, to the stunning DAC digital to analogue converter of 2009, every Naim digital product has advanced the art of digital audio engineering to the benefit of music reproduction. UnitiQute is no different.\u003cbr\u003e\u003cbr\u003eUnitiQute is capable of handling an enormous range of digital audio formats, and Naim digital audio engineering ensures that each one sounds as musical and engaging as its inherent potential allows. UnitiQute digital connectivity also means that as well as offering all-in-one functionality operating as a digital hub for external digital sources, games consoles or digital TV audio for example, it can also output its internal sources or external digital signals to an external DAC for even higher audio quality. Analogue audio connectivity is not forgotten either. Two analogue inputs can accommodate CD players or portable music players via rear panel phono sockets and a front-panel mini-jack. And a preamplifier output means that with the addition of an external power amplifier, or even a sub-woofer, UnitiQute can become the heart of a very wide bandwidth audio system. And when you want to listen privately, a front panel headphone socket makes such selfishness all too easy.\u003cbr\u003e\u003cbr\u003eKEY FEATURES\u003cbr\u003e• UPnP-enabled for playback of network-stored audio \/ internet broadcasts from PC, Mac or NAS drives\u003cbr\u003e• Multi-format radio (FM, DAB, Internet)\u003cbr\u003e• Front-panel USB for iPod\/MP3 player and USB memory stick playback\u003cbr\u003e• Apple authenticated enabling digital output from iPod for ultimate quality\u003cbr\u003e• iPod control, charging and front-panel content display when connected to front-panel USB port via standard iPod cable\u003cbr\u003e• 3.5mm front panel input that supports both analogue and digital sources\u003cbr\u003e• Two analogue inputs (3.5mm front-panel socket and RCA)\u003cbr\u003e• Onboard DAC with five 24bit \/ 192kHz capable S\/PDIF inputs for external digital sources\u003cbr\u003e• Preamplifier and 45W per channel into 4Ohm, 30W per channel into 8Ohm power amplifier\u003cbr\u003e• Ethernet and Wi-Fi network connectivity\u003cbr\u003e• Plays WAV, MP3, Windows Media-formatted content, AAC and FLAC from any suitable UPnP device together with WAV, AAC, MP3 and Apple Lossless (from an iPod)\u003cbr\u003e• Switchable bass contour control for low-volume listening\u003cbr\u003e• Bass management system for use with subwoofer-satellite loudspeaker systems Digital output on 75Ohm BNC connector (RCA adapter supplied)\u003cbr\u003e• Front-panel display with intuitive interface, remote-controlled\u003cbr\u003e• Front-panel 3.5mm headphone output Front panel logo touch-sensitive mute function\u003cbr\u003e• vTuner 5* full service internet radio service\u003cbr\u003e• Linear Power supply with 200VA toroidal transformer with three separate windings\u003cbr\u003e• Separate power supplies for digital, analogue, and power amplifier Ground selector switch for optimum performance\u003cbr\u003e• High quality Wolfson DAC Naim compact, non-resonant, non-magnetic case\u003cbr\u003e• OLED display for high contrast\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAUDIO INPUTS \u003cbr\u003eAnalogue Inputs 3.5mm front-panel socket, 1 RCA \u003cbr\u003eAntenna Inputs Wi-Fi, F type, (plus PAL adapter) \u003cbr\u003eOverload Margin 20dB \u003cbr\u003eInput Sensitivity 270mV at 47KO \u003cbr\u003eDigital Inputs 5 S\/PDIF (2 optical, 2 coaxial, 1 digital\/analogue 3.5mm jack)\u003cbr\u003eUSB Inputs 1 front-panel socket \u003cbr\u003eOther Inputs Ethernet and iPod (digital via USB socket) \u003cbr\u003eTuning Range FM 87.5 - 108Mhz DAB Band III and L Band\u003cbr\u003eAUDIO OUTPUTS\u003cbr\u003eSignal To Noise Ratio (S\/N ratio) 80dB \u003cbr\u003ePower Outputs 45W per channel into 4O, 30W per channel in 8O \u003cbr\u003eDigital Outputs (type) BNC 75O (plus RCA adapter) \u003cbr\u003eOther Outputs Headphone \u003cbr\u003eAudio Outputs Speaker output, preamp output (RCA)\u003cbr\u003eCONTROL \u003cbr\u003eIR Input Front panel only \u003cbr\u003eRS232 Yes \u003cbr\u003eOther Front panel logo touch-sensitive mute function\u003cbr\u003eFORMATS\u003cbr\u003eAudio Formats Supported Internet radio (Windows Media-formatted content, MP3 Streams, MMS), Playlists (M3U, PLS), MP3, AAC (up to 320kBit\/s, CBR\/VBR), Windows Media-formatted content-9 (up to 320kBit\/s), FLAC and WAV (up to 24bit\/96kHz via UPnp and USB only), OGG Vorbis iRadio Service Provider vTuner 5* full service\u003cbr\u003ePOWER \u003cbr\u003eSupply Voltage 100V, 115V, 230V; 50 or 60Hz\u003cbr\u003ePower Consumption (maximum) 200VA\u003cbr\u003eOTHER\u003cbr\u003eLanguages English, German, Italian, French, Spanish, Chinese, Dutch\u003cbr\u003eNotes Windows Media is a trademark of Microsoft Corporation. UPnP is a trademark of the UPnP forum. iPod and Mac are trademarks of Apple Inc, registered in the U.S. and other countries. Dimensions 87 x 207 x 314mm (H x W x D)\u003cbr\u003eWeight 5.6Kg\u003cbr\u003eFINISH\u003cbr\u003eFront Black powder coated \u003cbr\u003eCase Black powder coated ","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57408712376652,"sku":"NAIMUNITIQUTE","price":1108.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/unitiqute_front.jpg?v=1777471169"},{"product_id":"naim-fraimlite-equipment-support-system-base","title":"Naim FraimLite Equipment Support System - Base","description":"For entry-level Naim systems, our FraimLite features the same tripod-style configuration, carefully optimised shelf spacing and high-quality material construction of our reference-quality Fraim.\u003cbr\u003e\u003cbr\u003e\n\nIt retains the cup-and-cone interface system used by its bigger brother too, but omits the dual layer base and ball-bearing decoupled glass shelf. Reference Fraim levels can be incorporated into the same system as FraimLite so that you can upgrade to our top of the range equipment support on a level-by-level basis.\u003cbr\u003e\u003cbr\u003e\n\n\n—  Fraim platforms available in Cherry, Natural Ash and Black finishes \u003cbr\u003e\n—  Extruded anodized aluminium Fraim legs available in three heights, and in silver or black finishes \u003cbr\u003e\n—  Modular design allows for system expansion over time \u003cbr\u003e\n—  Decoupled structure with inter-level cup-and-cone interfaces underneath shelves \u003cbr\u003e\n—  Stainless steel floor spikes for maximum isolation \u003cbr\u003e\n— Optimised shelf spacing to reduce magnetic interaction between components\u003cbr\u003e\u003cbr\u003e\n\n\n\nFraimLite takes the core Fraim concepts and components and strips them back to the fundamentals to create entry-level engineered support for less ambitious Naim systems or lower budgets. Stripping back to the fundamentals however implies no lack of performance or aesthetic quality. The philosophy of the entire Fraim concept is based on engineering integrity, and that philosophy is fully expressed in FraimLite.\u003cbr\u003e\u003cbr\u003e\n\nRather than two-stage base level isolation, FraimLite incorporates just a single set of three cone and cup minimal contact interfaces. Each FraimLite shelving level then forgoes the Fraim’s glass sub-shelf to support equipment directly on veneered composite panels.\u003cbr\u003e\u003cbr\u003e\n\nA FraimLite module comprises a single element base level with multiple shelving levels above. The base level and each shelving level incorporate a single set of cone and cup interfaces. As with the reference-level Fraim, FraimLite support enables Naim electronics to perform by providing the ideal motionless environment. Even modest Naim electronics will benefit, with greater detail resolution, more accurate dynamics, and simply more music.\u003cbr\u003e\u003cbr\u003e\n\nSpecifications:- \u003cbr\u003e\n\nLevel Height: \u003cbr\u003e \nStandard level 150 mm\u003cbr\u003e  \n Medium level 225 mm\u003cbr\u003e\n Tall level 229 mm  \u003cbr\u003e          \n Base level 79 mm\u003cbr\u003e\u003cbr\u003e\n \nAvailable Height (per level):  \u003cbr\u003e\nStandard level 131 mm\u003cbr\u003e\n Medium level 206 mm\u003cbr\u003e\n Tall level 280 mm \u003cbr\u003e\u003cbr\u003e\n \nShelf Dimensions: \u003cbr\u003e \n452 x 340 mm (W x D)\u003cbr\u003e\u003cbr\u003e\n \nOverall Dimensions:\u003cbr\u003e  \n643 x 442 mm (W x D)\u003cbr\u003e\u003cbr\u003e\n \nWeight:  \u003cbr\u003e\nStandard level 3.5kg\u003cbr\u003e\n Medium level 4.1kg \u003cbr\u003e       \n Tall level 4.75kg \u003cbr\u003e      \n Base level 2.8kg\u003cbr\u003e\u003cbr\u003e\n \nShipping Weight:\u003cbr\u003e  \nStandard 5.4 kg\u003cbr\u003e          \n Medium 6 kg \u003cbr\u003e               \n Tall level 6.65 kg\u003cbr\u003e          \n Base level 4.7 kg\u003cbr\u003e                \n Twin level 8.9 kg \u003cbr\u003e             \n Base and level 8.2 kg\u003cbr\u003e\u003cbr\u003e\n \n\nFinish:\u003cbr\u003e\n\nShelves -  \nAsh, Cherry, Black Ash\u003cbr\u003e\u003cbr\u003e\n \nUprights -  \nNatural anodised, Black anodised","brand":"Naim Audio","offers":[{"title":"Naim FraimLite Base - Cherry","offer_id":57409168441676,"sku":"NAIMFRAIMLITEBASE-C","price":399.17,"currency_code":"GBP","in_stock":true},{"title":"Naim FraimLite Base - Ash","offer_id":57419604918604,"sku":"NAIMFRAIMLITEBASE-ASH","price":399.17,"currency_code":"GBP","in_stock":true},{"title":"Naim FraimLite Base - Black Ash","offer_id":57419604984140,"sku":"NAIMFRAIMLITEBASE-BA","price":399.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Naim-FraimLite-Base-Black-Ash-2.jpg?v=1777479012"},{"product_id":"naim-nds-reference-network-player","title":"Naim NDS Reference Network Player","description":"\u003cp\u003e\u003cstrong\u003eThe Ultimate Reference Audiophile Network Player\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NDS is a network music player without equal. Inspired by the audio engineering and performance of world beating Naim CD players, and using the latest in high resolution network audio technology, the NDS lifts network streaming and digital audio sources unquestionably into the high-end. From internet radio to 24 bit\/192kHz audio, the NDS displays all the musical quality of the finest high-end components. The NDS takes its place above the award winning ND5 XS and NDX as the reference Naim network player. It is a revolutionary step forward for high-end audio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMusic lives, breathes and communicates\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConnect an NDS to your existing audio system, and the world of network audio opens for discovery. It’s a world of high-resolution audio downloads, UPnP™ streaming, and the vast resource of internet radio. But thanks to Naim audio engineering, it’s also a world of very high quality reproduction, where music lives, breathes and communicates.\u003c\/p\u003e","brand":"Naim Audio","offers":[{"title":"Naim NDS Reference Network Player","offer_id":57409211498828,"sku":"NAIMNDS","price":6249.17,"currency_code":"GBP","in_stock":true},{"title":"(2 x Burndy Interconnects)","offer_id":57419803623756,"sku":"NAIMNDS","price":6832.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naim-nds-reference-network-player.jpg?v=1777480534"},{"product_id":"naim-burndy-interconnect","title":"Naim Burndy Interconnect","description":"Burndy cables carry both signal and power, and feature dedicated, multi-pin, locking connectors. They are used with several of our power supplies and care should be taken to ensure that the correct cable is used in each application - the configuration of the cables varies with the particular units that are being linked. Units that require Burndy connections include the XPS, SuperLine, SNAXO, NAC 552, and the 555 PS.","brand":"Naim Audio","offers":[{"title":"Naim Single Burndy Interconnect (all variants)","offer_id":57409211728204,"sku":"NAIMSINGLEBURNDY","price":449.17,"currency_code":"GBP","in_stock":true},{"title":"Naim Burndy Set for NAPS555","offer_id":57419803689292,"sku":"NAIMBURNDYSETFORNAPS555","price":807.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naim-burndy.jpg?v=1777480538"},{"product_id":"naim-r-com-reference-remote-control","title":"Naim R-Com Reference Remote Control","description":"\u003ch3\u003eNaim R-Com Remote Control\u003c\/h3\u003eThere's a tradition of stylish and intuitive handsets for Naim products that offer qualities beyond the standard items. The latest, the R-com, marks a return to the slim and stripped-down handset style last seen from Naim in the shape of CDS\/NAC 52 handset of the mid 1990s. \n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eThe R-com is designed to provide intuitive and ergonomic remote control of the most often used functions of all Naim CD players, preamplifiers, integrated amplifiers and tuner. And thanks to its brushed aluminium finish and satisfying tactile quality, the R-com also looks and feels like an extension of the engineered precision of the CD555 and NAC 552.\u003c\/p\u003e","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57409211793740,"sku":"NAIMRCOM","price":349.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naim-r-com-remote-control.jpg?v=1777480542"},{"product_id":"naim-narcom-remote-controls","title":"Naim NARCOM Remote Controls","description":"\u003ch3\u003eNaim NARCOM-6 Combined CD\/Preamp Remote Control\u003c\/h3\u003e\n\u003cp\u003e\u003c\/p\u003e\nNaim's standard remote control is supplied with all CD players and preamplifiers, excluding the CD555 and NAC 552, where the R-Com is supplied.\u003cbr\u003e\n\u003cbr\u003e\n\n\nNaim NARCOM-5 Remote Control\u003cbr\u003e\u003cbr\u003e\n\n\nNaim's standard remote control is supplied with all CD players and preamplifiers, excluding the CD555 and NAC 552, where the R-Com is supplied.\n","brand":"Naim Audio","offers":[{"title":"Naim NARCOM-6 Server Remote Control","offer_id":57409211859276,"sku":"NAIMNARCOM6","price":65.83,"currency_code":"GBP","in_stock":true},{"title":"Naim NARCOM-5 System Remote Control","offer_id":57419804148044,"sku":"NAIMNARCOM5","price":65.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Naim-Narcom-5.jpg?v=1777480546"},{"product_id":"naim-wa5-high-gain-wireless-antenna","title":"Naim WA5 High Gain Wireless Antenna","description":"\u003ch3\u003eNaim High-Gain Wireless Antenna\u003c\/h3\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eThe WA5 high gain wireless antenna can be attached to the back of any of Naim's wireless enabled products, (UnitiQute, NaimUniti or NDX) replacing the standard WA2 antenna. It offers 5dB of gain, double the gain of the standard antenna. This strengthens the host products' connection to the network, making loss of signal much less likely.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eThe WA5 is the ideal accessory for customers wanting to use their network-connected Naim product wirelessly in rooms that are not in close proximity to the router.\u003c\/p\u003e","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57409212186956,"sku":"NAIMWA5","price":15.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naim-wa5-high-gain-wireless-antenna.jpg?v=1777480549"},{"product_id":"naim-mu-so-wireless-music-system-muso","title":"Naim Mu-so Wireless Music System (Muso)","description":"Introducing Mu-so™ by Naim\u003cbr\u003e\nMu-so is Naim's first wireless music system, designed to transform your music into incredible sonic experiences.\u003cbr\u003e\u003cbr\u003e \nCombining Naim’s expertise in streaming, amplification and loudspeaker technology, Mu-so is the stage your music deserves, bringing you closer to the songs that inspire your life.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\n\n24th April 2014, London, UK. Naim unveiled Mu-so, their first wireless music system, at the Vinyl Factory in London.\u003cbr\u003e\u003cbr\u003e\n \nDesigned to bring the Naim sound to every modern home, Mu-so combines Naim's expertise in streaming, amplification and loudspeaker design to unleash your digital music and create intense, emotive and enthralling sonic experiences.\u003cbr\u003e\u003cbr\u003e\n  \nMu-so will be available in September 2014. To be the first to receive one we are now accepting pre-orders.\u003cbr\u003e\u003cbr\u003e \n \nMusic, liberated\u003cbr\u003e\nWhile traditional wireless music systems offer quick solutions for sound, Mu-so offers a carefully engineered step up in sound quality and concentrates on creating the best possible experience for the listener whilst still being simple to set up and use. Meticulously designed, tested and refined by the same team of engineers behind some of the world’s best hi-fi and winners of the Queen’s Award for Innovation 2014, Mu-so is a true next-generation music system.\u003cbr\u003e\u003cbr\u003e\n \nMusic, unlimited\u003cbr\u003e\nMu-so can stream high resolution ‘better than CD’ quality music from an array of devices including smartphones and tablets as well as laptops and other storage devices. Its advanced connectivity includes AirPlay, UPnP™ (Universal Plug ‘n’ Play), Bluetooth (aptX), internet radio and native support for popular streaming services. It will also boost the sound of your TV, set top box or games console through a digital input or take audio from and charge an MP3 player or iPod\/iPhone via USB or a 3.5mm analogue input.\u003cbr\u003e\u003cbr\u003e\n \nA Mu-so control app for iPad, iPhone and iPod as well as Android devices allows you to create playlists and play your favourite albums on the go or from the sofa. Offering simple controls and classic Naim design, the app also allows access to millions of high quality internet radio stations. The new control app will be available to download for iOS and Android devices in September 2014 and will be compatible with existing Naim streaming products as well as Mu-so. More details will follow for existing Naim customers closer to launch in September.\u003cbr\u003e\u003cbr\u003e\n  \nA bespoke EQ system can alter the sound performance based upon your living space. Whether Mu-so is positioned close to a wall or away from a wall, bespoke settings allow rich bass and treble reproduction even at low volumes.\u003cbr\u003e\u003cbr\u003e \n\nPower and performance\u003cbr\u003e \nMu-so features six 75 watt digital amplifiers driving each of the Naim custom-designed speakers independently. It can be used as a central home hi-fi system or, when linked with other Naim streaming players such as the UnitiQute 2 or NDX as a client player, it can create a true high-fidelity multi-room system. Offering playback of 24bit\/192kHz high resolution music, Mu-so means music lovers no longer have to compromise sound quality for convenience.\u003cbr\u003e\u003cbr\u003e\nNaim’s Managing Director, Paul Stephenson, commented: “Naim exists to make music central to people’s lives and, as our first wireless music system, Mu-so exists to make that a reality for even more music lovers. Through a simplicity in design and an understanding of the engineering and technology needed to unleash digital music, we’ve created a system that is a revelation in sound and a joy to own and use.”\u003cbr\u003e\u003cbr\u003e\nWireless innovation, without boundaries\u003cbr\u003e\nFrom AirPlay to high quality Bluetooth aptX to UPnP™ Wi-Fi streaming, Mu-so is compatible with most portable smart devices and compatible NAS drives. UPnP™ streaming and AirPlay offer constant, hassle-free sound over your home Wi-Fi network. Simply connect your device to Mu-so once and it remembers it forever. Bluetooth aptX allows any smartphone or tablet to connect with Mu-so almost instantly - ideal for entertaining guests and sharing new music.\u003cbr\u003e\u003cbr\u003e\n \nMu-so will connect to your home network wirelessly or via a wired connection on an Ethernet port. Either way you will be online and playing music in minutes.\u003cbr\u003e\u003cbr\u003e\n\nDesign excellence\u003cbr\u003e \nMu-so uses premium materials and shares a design DNA with our flagship amplification system, Statement. A striking solid extruded aluminium heat sink runs across the length of Mu-so, designed to maximise thermal performance, longevity and, above all, sound quality. It is bead-blasted and anodised for a premium finish.\u003cbr\u003e\u003cbr\u003e\n \nThe internal speaker cabinet is wooden for acoustic performance while the aluminium skin offers extra dampening for a distortion free sound. The silk dome tweeters in Mu-so replace traditional metal cones found in many wireless speakers and share the same materials as high-end hi-fi speakers. The standard speaker grille can be detached and replaced with three optional colour variations which will be unveiled before launch in September","brand":"Naim Audio","offers":[{"title":"Naim Muso with Black Grille","offer_id":57409362133324,"sku":"NAIMMUSOB","price":829.17,"currency_code":"GBP","in_stock":true},{"title":"Naim Muso - Black and Deep Blue Grille","offer_id":57420209652044,"sku":"NAIMMUSODB","price":870.83,"currency_code":"GBP","in_stock":true},{"title":"Naim Muso - Black and Vibrant Red Grille","offer_id":57420209717580,"sku":"NAIMMUSOVR","price":870.83,"currency_code":"GBP","in_stock":true},{"title":"Naim Muso - Black and Burnt Orange Grille","offer_id":57420209783116,"sku":"NAIMMUSOBO","price":870.83,"currency_code":"GBP","in_stock":true},{"title":"Naim Muso with Black Grille (Demo)","offer_id":57420209946956,"sku":"NAIMMUSODEMO","price":829.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/naim-muso.jpg?v=1777483778"},{"product_id":"naim-mu-so-grille","title":"Naim Mu-so Grille","description":"The Naim Mu-so unit comes with a standard black grille, but you can swap it for three other colours – vibrant red, deep blue, burnt orange – for an extra £64.95 each.\n","brand":"Naim Audio","offers":[{"title":"Deep Blue","offer_id":57409485603148,"sku":"NAIMMUSOGRILLE-DB","price":41.67,"currency_code":"GBP","in_stock":true},{"title":"Vibrant Red","offer_id":57421415416140,"sku":"NAIMMUSOGRILLE-VR","price":41.67,"currency_code":"GBP","in_stock":true},{"title":"Burnt Orange","offer_id":57421422756172,"sku":"NAIMMUSOGRILLE-BO","price":41.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/awaiting-image_5fae98f3-3aa1-4331-9c3a-6487fef293dc.jpg?v=1777486970"},{"product_id":"naim-nac-n-272-streaming-preamplifier","title":"Naim NAC-N 272 Streaming Preamplifier","description":"The 272 is a high-performance Naim preamplifier with extensive music streaming facilities. It combines the two worlds of digital and analogue audio engineering to create a versatile product with exceptional sound performance.\u003cbr\u003e\u003cbr\u003e\n\nThe NAC-N 272 is a simple step into high performance music streaming. It offers an unparalleled\nbalance of integration, versatility and performance.\u003cbr\u003e\u003cbr\u003e\nCombined with a Naim power amplifier such as the NAP 250 or NAP 300, the 272 leads a modern two box system capable of unleashing music from a wide range of digital and analogue sources. It can also be upgraded with the introduction of an XP5 XS, XPS or 555 PS power supply.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\nDigital Technology\u003cbr\u003e\nThe 272’s digital pedigree is formidable. It shares the incredibly powerful DSP (Digital Signal Processor) used by the reference NDS network player and features Naim’s proprietary digital audio buffering and filtering techniques. This helps to eliminate jitter and optimise the audio stream for the best musical\nperformance from any digital source.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\nAnalogue Preamplifier\u003cbr\u003e\nThe 272 features a traditional Naim preamplifier section with high-quality hand-matched components. All of the components in the signal path are discrete analogue parts specified after listening tests. Great care has been taken to protect the signal path from sources of interference such as the power supply and streaming circuitry; the digital and analogue sections of the product communicate using optical isolation chips.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\nHybrid Volume Control \u0026amp; Class-A Headphone Amp\u003cbr\u003e\nThe 272 volume control is derived from the design of the flagship Statement. It offers smooth operation and perfect level matching while a Class-A single-ended headphone amplifier allows the 272 to make the most of high-performance headphones. As soon as headphones are plugged in, the output current drive is automatically turned up five times to give dynamic drive for all headphone impedances.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\nHand-matched \u0026amp; Hand-wired\u003cbr\u003e\nAll analogue input sockets on the 272 are individually hand wired to the main board to enhance mechanical decoupling of the\nsensitive circuits. The board itself is mounted on shoulder bolts to help decouple it further. The sound critical resistors used in the 272 arrive at Naim matched to within 5%. This already high tolerance is improved even further before assembly by hand-matching to within 1%.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\nDSD64 Compatibility\u003cbr\u003e\nThe NAC-N 272 is the first Naim product able to play\nDSD64 files. This adds to ts already rich list of features\nand means customers can explore even more music from\ndifferent sources and in different formats.\nDSD files can be played back on the 272 via the UPnPTM, electrical S\/PDIF or USB inputs.\nTo keep the DSD audio routing as pure as possible the digital header information is stripped out by the DSP leaving only the audio. This is then optimised for the DAC by down sampling the stream to 40bit\/768kHz, using Naim software to maintain the high sample rate and accuracy. This adapted DSD stream then enters the DAC, bypassing the DACs internal digital filter.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\n\nThe NAC-N 272 offers a comprehensive range of connectivity and music streaming features. It is controllable using the Naim app for iOS and Android devices as welll as the supplied remote control.\u003cbr\u003e\nInputs include: UPnP streaming, Spotify Connect, Bluetooth (aptX), iRadio, a DAB\/FM tuner, six digital and three analogue inputs and a USB input for iOS devices, MP3 players or USB sticks. It’s also the first Naim product to include DSD 64 compatibility (more on this on following page). Like all Naim streaming products, the 272 is updatable via a USB mini-B port on its rear panel to take advantage of future performance and feature updates.","brand":"Naim Audio","offers":[{"title":"Naim NAC-N 272 Streaming Preamplifier","offer_id":57409599209804,"sku":"NAIMNACN272","price":3082.5,"currency_code":"GBP","in_stock":true},{"title":"with DAB\/FM Module","offer_id":57422371160396,"sku":"NAIMNACN272DABFM","price":3332.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Naim-NAC-N_272_network-player-preamplifier.jpg?v=1777489401"},{"product_id":"naim-statement-nac-s1-pre-amplifier","title":"Naim Statement NAC S1 Pre Amplifier","description":"Everything about Statement is a leap forward in technology and design. It's been engineered from the ground up for pure performance.\u003cbr\u003e\u003cbr\u003e\n\n\n\nStatement perfectly represents our philosophy of providing the highest quality power supply, while isolating individual sections to avoid unwanted interference.\u003cbr\u003e\u003cbr\u003e\n\nThe NAC S1 and NAP S1 share the same fundamental layout. The noisy power supply is housed in the base and sensitive electronics are nestled above. Each section is divided by an acrylic centre-piece that blocks interaction. Top section electronics are separated further still, with internal chambers isolating individual stages.\u003cbr\u003e\u003cbr\u003e\n\n\n\nThe Statement NAP S1 features a new bridged dual design with zero global feedback. The two stages are physically separated to optimise the amplifier circuit with the delicate voltage stage at the very top of the power amplifier, away from the current stage at the bottom.\u003cbr\u003e\u003cbr\u003e\n\nEach mono power amplifier uses a huge 4000VA transformer to power speakers with precisely 746W (into 8 ohms). Precision engineering also makes sure every single watt is delivered right to where it's needed, when it's needed. After all, power is nothing without purpose.\u003cbr\u003e\u003cbr\u003e\n\nSpecifications:- \u003cbr\u003e\n\n\nAnalogue Input:\u003cbr\u003e \n3 X DIN, 3 X RCA, 2 X Balanced\u003cbr\u003e  \n \n\nAudio Outputs:\u003cbr\u003e   \n1 X Balanced, 2 X Unbalanced (4 pin DIN sockets) \u003cbr\u003e \n \nWeight:\u003cbr\u003e  \n61.5kg\u003cbr\u003e \n \nDimensions (HxWxD):\u003cbr\u003e   \n940 x 270 x 412mm (width includes stabiliser)\n\n\n\n","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57409652490572,"sku":"NAIMSTATENACS1","price":54165.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Naim-Statement-NAC-S1-image2.jpg?v=1777490342"},{"product_id":"naim-statement-nap-s1-power-amplifier","title":"Naim Statement NAP S1 Power Amplifier","description":"Everything about Statement is a leap forward in technology and design. It's been engineered from the ground up for pure performance.\u003cbr\u003e\u003cbr\u003e\n\n\n\nStatement perfectly represents our philosophy of providing the highest quality power supply, while isolating individual sections to avoid unwanted interference.\u003cbr\u003e\u003cbr\u003e\n\nThe NAC S1 and NAP S1 share the same fundamental layout. The noisy power supply is housed in the base and sensitive electronics are nestled above. Each section is divided by an acrylic centre-piece that blocks interaction. Top section electronics are separated further still, with internal chambers isolating individual stages.\u003cbr\u003e\u003cbr\u003e\n\n\n\nThe Statement NAP S1 features a new bridged dual design with zero global feedback. The two stages are physically separated to optimise the amplifier circuit with the delicate voltage stage at the very top of the power amplifier, away from the current stage at the bottom.\u003cbr\u003e\u003cbr\u003e\n\nEach mono power amplifier uses a huge 4000VA transformer to power speakers with precisely 746W (into 8 ohms). Precision engineering also makes sure every single watt is delivered right to where it's needed, when it's needed. After all, power is nothing without purpose.\u003cbr\u003e\u003cbr\u003e\n\nSpecifications:- \u003cbr\u003e\n\n\nAnalogue Input:  \n1 x XLR (each)\n \nAudio Outputs: \nBinding posts for spade \u0026amp; 4mm banana\n \nPower Output:  \n746W into 8 ohms, 1450W into 4 ohms, 9kW burst power into 1 ohm\n \n\nWeight:  \n101kg (each)\n \nDimensions (HxWxD):  \n940 x 256 x 383mm (each)","brand":"Naim Audio","offers":[{"title":"Default Title","offer_id":57409652719948,"sku":"NAIMSTNAPS1","price":47499.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Naim-Statement-NAP-S1.jpg?v=1777490347"},{"product_id":"naim-super-lumina-speaker-cable","title":"Naim Super Lumina Speaker Cable","description":"During the development of Statement, Naim's flagship amplification system, their engineers realised that they would need to design a whole new range of high-performance cables for it to reach its true potential. \u003cbr\u003e \u003cbr\u003e \n\nWith this in mind they began a development project to design interconnects and speaker cable that would meet Statement standards of performance. Through a deep understanding of material science and after thousands of hours testing in the listening room, the Super Lumina range was born.\u003cbr\u003e \u003cbr\u003e \n\nDesigned to maximise the performance of Statement but equally at home in 500 Series and Classic Series systems, Super Lumina speaker cables are available with 4mm or spade connectors. \u003cbr\u003e \u003cbr\u003e \n\nSuper Lumina speaker cables are designed to minimise the effect of external and internal interference sources and preserve maximum signal fidelity.\u003cbr\u003e \u003cbr\u003e \n\nThe fundamental cable design consists of several individually-insulated multi-strand silver-plated copper conductors of varying diameters enclosed in a tin-plated copper shield. This is all enclosed in a soft outer jacket which facilitates easy installation whilst minimising microphonic interference. Each signal, return, ground and shield conductor is individually manufactured for its specific function.\u003cbr\u003e \u003cbr\u003e \n\nEach Super Lumina cable is hand-assembled at Naim in Salisbury to the customer’s specification of length and termination. The process is intricate and highly-skilled, following detailed instructions which cover every aspect of the build. Every cable also goes through a proprietary de-stressing process to relieve the materials of the inherent stresses which are a result of the manufacturing process. This means the cables reach optimum performance with minimal run in time.  \n","brand":"Naim Audio","offers":[{"title":"s per 3m","offer_id":57409652883788,"sku":"NAIMSUPERLUMINACABLE3M","price":1697.5,"currency_code":"GBP","in_stock":true},{"title":"s per 5m","offer_id":57422400454988,"sku":"NAIMSUPERLUMINACABLE5M","price":2829.17,"currency_code":"GBP","in_stock":true},{"title":"s per 7m","offer_id":57422400487756,"sku":"NAIMSUPERLUMINACABLE7M","price":3960.83,"currency_code":"GBP","in_stock":true},{"title":"s per 9m","offer_id":57422400520524,"sku":"NAIMSUPERLUMINA9M","price":5092.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Naim-super-Lumina.jpg?v=1777490351"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/collections\/naim-audio-logo_3d380c51-5865-4456-a794-623e04f06c4d.jpg?v=1777394235","url":"https:\/\/www.stoneaudio.co.uk\/collections\/naim-audio.oembed","provider":"Stone Audio","version":"1.0","type":"link"}