{"title":"Pro-Ject","description":"For over fifty years record players have been designed and built at Pro-Ject's manufacturing facility in Litovel, situated to the east of Prague. Pro-Ject Audio Systems is currently one of the world's leading suppliers of record players, with a range of models designed to satisfy all levels of expectation and budget. Pro-Ject products exhibit sonic performance beyond all expectations normally associated with their price. they are simple to use, maintanance free and will function reliably for a lifetime.","products":[{"product_id":"pro-ject-debut-carbon-dc-turntable","title":"Pro-ject Debut Carbon DC Turntable","description":"The original Pro-Ject Debut was released in the late 1990’s during a time when CD was king, and the vinyl format was presumed to be all but gone. But well over a decade later the model still stands, and it deserves a key accreditation in the ongoing success of a rejuvenated vinyl and budget turntable market. The Debut symbolises all that is good about the vinyl market; it is easy to set-up and fantastic to listen to, with the right mixture of user-friendliness and opportunity to tweak and upgrade.\u003cbr\u003e\u003cbr\u003e\n\nAt the beginning of 2012, the new Debut Carbon expands on the Debut III in a variety of ways; namely the inclusion of an 8.6\" carbon fibre tonearm, 12\" platter and rear-mounted junction box. The new motor isolation system also utilises a wholly unique rubber compound developed exclusively by Ortofon A\/S to offer dramatically reduced resonance transference from motor.\u003cbr\u003e\u003cbr\u003e\n\nNow 2 years on the Debut Carbon DC benefits from an upgraded new DC power supply with ultra precision frequency DC-driven AC generator (matching the one used in the Pro-Ject Speed Box) for precision speed stability. The new DC model also prospers from the upgrade by using less power in operation and when not in use.\u003cbr\u003e\u003cbr\u003e\n\nThe new 9V AC motor upgrade also comes with an improved TPE motor suspension. This new suspension reduces vibration caused by the motor and is normally found on improved turntables such as the Pro-Ject Xpression Carbon UKX. \u003cbr\u003e\u003cbr\u003e\n\nThe Debut Carbon DC also sees the re-introduction of the Debut's famous colours! Not only is the Debut Carbon DC available in the gloss black finish as standard, but for the same cost you can also choose to have a statement-making Red, Blue, Green, Yellow, White, Purple or Light Grey gloss finish.\u003cbr\u003e\u003cbr\u003e\n\nKey Features:\u003cbr\u003e\n•New DC power supply with ultra precision frequency DC-driven AC generator (like the Speed Box) for ultimate speed stability\u003cbr\u003e\n•New TPE motor suspension \u003cbr\u003e\n•8.6\" one-piece carbon fibre tonearm, adding stiffness and reducing resonance around the pick-up cartridge (rarely found on budget turntables, due to high production costs).\u003cbr\u003e\n•High-quality counterweight - helping further reduce unwanted resonance.\u003cbr\u003e\n•Two isolation 'feet' made especially by Ortofon A\/S, used to decouple the motor from the plinth.\u003cbr\u003e\n•12\" platter.\u003cbr\u003e\n•Junction box installed, allowing for the easy upgrade of turntable interconnects.\u003cbr\u003e\n•Factory-fitted Ortofon 2m Red.\u003cbr\u003e\n•Various gloss-coloured finishes available.\u003cbr\u003e\n•Lid included\u003cbr\u003e\u003cbr\u003e\n\nTechnical Data:\u003cbr\u003e\n\n\nSpeed: 33,45 RPM (Manual Speed Change) \u003cbr\u003e \nDrive Principle: Belt Drive \u003cbr\u003e\nPlatter: 300mm Metal With Felt Mat \u003cbr\u003e\nMain Bearing: Stainless Steel \u003cbr\u003e\nWow \u0026amp; Flutter: +\/- 0.10% \u003cbr\u003e \nSpeed Drift: +\/- 0.80% \u003cbr\u003e \nSignal to Noise: - 68dB \u003cbr\u003e \nPre-Fitted Cartridge:  Ortofon 2M Red  \u003cbr\u003e\nTonearm: 8.6\" Carbon Fibre \u003cbr\u003e\nEffective Arm Length: 218.5mm \u003cbr\u003e\nEffective Arm Mass: 6.0g\u003cbr\u003e  \nOverhang: 18.5mm \u003cbr\u003e\nTracking Force: 10-30mN \u003cbr\u003e \nIncluded Accessories: RCA Cable, Lid  \u003cbr\u003e\nDimensions (WxHxD): 415 x 118 x 320mm - Lid Closed\u003cbr\u003e \nWeight: 5.6kg net  ","brand":"Pro-Ject","offers":[{"title":"Pro-Ject Debut Carbon DC Turntable - Light Grey","offer_id":57405969563980,"sku":"PDEBUTII","price":307.5,"currency_code":"GBP","in_stock":true},{"title":"Pro-Ject Debut Carbon DC Turntable - Gloss Black","offer_id":57415719125324,"sku":"PDEBUT3B","price":307.5,"currency_code":"GBP","in_stock":true},{"title":"Pro-Ject Debut Carbon DC Turntable - White","offer_id":57415719190860,"sku":"PDEBUT3W","price":307.5,"currency_code":"GBP","in_stock":true},{"title":"Pro-Ject Debut Carbon DC Turntable - Red","offer_id":57415719223628,"sku":"PDEBUT3R","price":307.5,"currency_code":"GBP","in_stock":true},{"title":"Pro-Ject Debut Carbon DC Turntable - Blue","offer_id":57415719256396,"sku":"PDEBUT3BLU","price":307.5,"currency_code":"GBP","in_stock":true},{"title":"Pro-Ject Debut Carbon DC Turntable  - Yellow","offer_id":57415719289164,"sku":"PDEBUT3Y","price":307.5,"currency_code":"GBP","in_stock":true},{"title":"Pro-Ject Debut Carbon DC Turntable - Green","offer_id":57415719321932,"sku":"PDEBUT3G","price":307.5,"currency_code":"GBP","in_stock":true},{"title":"Pro-Ject Debut Carbon DC Turntable - Purple","offer_id":57415719387468,"sku":"PROJECTDEBUTCARBON-P","price":307.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/pro-ject-debut-carbon-green.jpg?v=1777451669"},{"product_id":"pro-ject-head-box-se","title":"Pro-Ject Head Box SE","description":"Pro-Ject Head Box SE Headphone amplifier\u003cbr\u003e\u003cbr\u003eFeatures\u003cbr\u003e• Connections for two headphone sets with individual volume adjustment\u003cbr\u003e• Permits connection of two further line-level sources to your amplifier\u003cbr\u003e• Oversized outboard power supply included\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003ePower output 150mW\/600ohms \u003cbr\u003eHeadphone connection\u0026gt;32 ohms \u003cbr\u003eOutput impedance 20ohms \u003cbr\u003eSignal to noise 87dB ref. full output\u003cbr\u003eFrequency response 20Hz – 20kHz\/0,2dB (10Hz – 120kHz\/-1dB)\u003cbr\u003eTHD 0,005% \u003cbr\u003eHeadphone jack 3-pole ¼\" (6,3mm ? ) phono socket\u003cbr\u003ePower supply type Mains-fed outboard power supply\u003cbr\u003eOutput voltage 16V\/500mA AC \u003cbr\u003ePower consumption 16V\/120mA AC \u003cbr\u003eDimension W x D x H 130 x 105 x 80mm \u003cbr\u003eWeight 1.000g without power supply","brand":"Pro-Ject","offers":[{"title":"Default Title","offer_id":57407160811852,"sku":"PHEADBOX","price":170.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/projectheadbox.jpg?v=1777455047"},{"product_id":"pro-ject-phono-box","title":"Pro-Ject Phono Box","description":"Phono Box\u003cbr\u003eMM\/MC Phono Pre-amplifier\u003cbr\u003e\u003cbr\u003eFeatures\u003cbr\u003e• Metal case shields the electronics from vibrational and electromagnetic interference\u003cbr\u003e• Outboard power supply included\u003cbr\u003e• Small size allows installation close to record player\u003cbr\u003e• Optimal channel separation through dual-mono circuitry\u003cbr\u003e• Special low-noise ICs used\u003cbr\u003e• Gold plated RCA connection sockets \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSpecification\u003cbr\u003eInput impedance, MM 47kohms\/100pF \u003cbr\u003eInput impedance, MC 100ohms\/100pF\u003cbr\u003eOutput voltage 200mV\/1kHz a\u003cbr\u003et 5mV\/1kHz at MM input\u003cbr\u003eGain, MM 32dB \u003cbr\u003eOutput voltage 200mV\/1kHz at\u003cbr\u003e0,45mV\/1kHz at MC input\u003cbr\u003eGain, MC 53dB \u003cbr\u003eNoise floor, MM -88dB \u003cbr\u003eNoise floor, MC -79dB\u003cbr\u003eTHD 0,005% \u003cbr\u003eRIAA-equalisation curve accuracy 20Hz - 20kHz \/ max. 0,5dB\u003cbr\u003ePower supply 16V\/200mA AC \u003cbr\u003ePower consumption 16V\/40mA AC \u003cbr\u003eDimension W x D x H 112 x 115 x 30mm\u003cbr\u003eWeight 280g without power supply","brand":"Pro-Ject","offers":[{"title":"Default Title","offer_id":57407166775628,"sku":"PPHONOBOX","price":74.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/projectphonobox.jpg?v=1777455079"},{"product_id":"pro-ject-phono-box-usb-v","title":"Pro-Ject Phono Box USB V","description":"Phono preamplifier (MM and MC) with USB-output to record music onto PC \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e• Preamplifier for MM or MC with switch on the rear panel\u003cbr\u003e• Low-noise ICs\u003cbr\u003e• Analogue-out (RCA) \u0026amp; USB Digital-out\u003cbr\u003e• Compatible with Windows®, MacOS® and Linux®\u003cbr\u003e• Digitising line-level inputs (Tape, cassette, etc)\u003cbr\u003e• Phono\/Line selector on front panel\u003cbr\u003e• Record level adjustment on front panel\u003cbr\u003e• Available in black and silver","brand":"Pro-Ject","offers":[{"title":"Silver","offer_id":57408786694476,"sku":"PROJECTUSBVS","price":115.83,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":57418748363084,"sku":"PROJECTUSBVB","price":115.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/phonoboxusbvb.jpg?v=1777472916"},{"product_id":"pro-ject-phono-box-mm-pre-amplifier","title":"Pro-Ject Phono Box MM Pre Amplifier","description":"MM Phono Pre-amplifier  \u003cbr\u003e\u003cbr\u003e\n\n \n\n\u003cb\u003eGood sound from sound technology \u003c\/b\u003e\u003cbr\u003e \n\n• Metal case shields the electronics from vibrational and electromagnetic interference \u003cbr\u003e \n\n• Special low-noise ICs used  \u003cbr\u003e\n\n• Optimal channel separation through dual-mono circuitry \u003cbr\u003e \n\n• Gold plated RCA connection sockets \u003cbr\u003e \n\n• Outboard power supply included  \u003cbr\u003e\u003cbr\u003e\n\n \n\n\u003cb\u003eFeatures \u003c\/b\u003e\u003cbr\u003e \n\n• Amplification and RIAA equalisation for MM cartridges  \u003cbr\u003e\n\n• Small size allows installation close to record player \u003cbr\u003e\n\n \n\n","brand":"Pro-Ject","offers":[{"title":"Default Title","offer_id":57409092583756,"sku":"PROJECTPHONOBOXMM","price":62.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Phonobox_MM.jpg?v=1777477886"},{"product_id":"pro-ject-ground-it-deluxe","title":"Pro-Ject Ground IT Deluxe","description":"Pro-Ject Ground IT Deluxe 1 \u0026amp; Ground IT Deluxe 2 Equipment bases \u003cbr\u003e\u003cbr\u003e\n\n\n\n\n\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003e\n\n• Dark grey piano-lacquer finish \u003cbr\u003e\n\n• Filled with granulate for universal damping \u003cbr\u003e\n\n• Height-adjustable aluminium cone feet. Three or four feet may be fitted according to taste\/application \u003cbr\u003e\u003cbr\u003e\n\n\n\n\u003cb\u003eGround It Deluxe 1\u003c\/b\u003e\u003cbr\u003e\nDimensions: 500 x 65 x 400mm (H including cone feet). H without cone feet 45mm\u003cbr\u003e\nWeight: 11.6kg \u003cbr\u003e\u003cbr\u003e\n\n\n\u003cb\u003eGround It Deluxe 2\u003c\/b\u003e\u003cbr\u003e\nDimensions: 435 x 65 x 340mm (H including cone feet). H without cone feet 45mm \u003cbr\u003e\nWeight: 8.5kg \u003cbr\u003e\u003cbr\u003e\n\nGround-IT Deluxe 3  \u003cbr\u003e\u003cbr\u003e \nDimensions (W x H x D): 500 x 65 x 400mm\n (Height Without Feet = 45mm) \u003cbr\u003e\nFeet: Magnetic Feet \u003cbr\u003e\nWeight: 13.5kg ","brand":"Pro-Ject","offers":[{"title":"1","offer_id":57409094615372,"sku":"PROJECTGROUNDITDELUXE1","price":208.33,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":57419487674700,"sku":"PROJECTGROUNDITDELUXE2","price":225.0,"currency_code":"GBP","in_stock":true},{"title":"3","offer_id":57419488035148,"sku":"PROJECTGROUNDITDELUXE3","price":416.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/project_groundit.jpg?v=1777477963"},{"product_id":"pro-ject-align-it","title":"Pro-Ject Align IT","description":"Tool for cartridge alignment and adjustment\u003cbr\u003e\u003cbr\u003e \n\n \n\n\u003cb\u003eFeatures \u003c\/b\u003e\u003cbr\u003e\n\n• Special slip-proof tool for defining the turning centre of Pro-Ject tonearms \u003cbr\u003e\n\n• Adaptable to accommodate differing tonearm lengths \u003cbr\u003e\n\n• Suitable for other manufacturers’ tonearms \u003cbr\u003e\n\n• Suitable for tonearms between 8” (203mm) and 12“ (305mm) effective length\u003cbr\u003e\n","brand":"Pro-Ject","offers":[{"title":"Default Title","offer_id":57409094648140,"sku":"PROJECTALIGNIT","price":87.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/project_alignit.jpg?v=1777477967"},{"product_id":"pro-ject-acryl-it","title":"Pro-Ject Acryl-IT","description":"Acrylic is a popular material in high-end turntables. Not only does it offer a great visual appeal, it also has superlative sonic capabilities well-suited to audiophile systems.\u003cbr\u003e\u003cbr\u003e\n\nThe Acryl-IT upgrade platter for Debut and 1 Xpression turntable models delivers an improved sound performance compared to the regular steel platters. Acrylic is acoustically inert, and offers no colouration inside the audible frequency band for a pure, true-to-life audio performance. \u003cbr\u003e\u003cbr\u003e\n\nAcrylic is an ideal platform for vinyl records, so for optimal performance the Acryl-IT is used without a turntable mat.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\nDelivers improved sound performance\u003cbr\u003e\nIdeal replacement for standard metal platter\u003cbr\u003e\nInert material greatly reduces resonances\u003cbr\u003e\nCentre indentation to accommodate record labels\u003cbr\u003e\nCan be used with clamps like the Pro-Ject Clamp-IT\u003cbr\u003e\nImproves the overall turntable aesthetic","brand":"Pro-Ject","offers":[{"title":"Default Title","offer_id":57409094680908,"sku":"PROJECTACRYLIT","price":104.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/project_acrylit.jpg?v=1777477972"},{"product_id":"pro-ject-leather-it","title":"Pro-Ject Leather IT","description":"Leather turntable mat. (300m diameter)\u003cbr\u003e\u003cbr\u003e\n\nAvailable in Grey and Black.\u003cbr\u003e\n","brand":"Pro-Ject","offers":[{"title":"Black","offer_id":57409094746444,"sku":"PROJECTLEATHERITB","price":37.5,"currency_code":"GBP","in_stock":true},{"title":"Grey","offer_id":57419490558284,"sku":"PROJECTLEATHERITG","price":41.67,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/project_leatherit.jpg?v=1777477981"},{"product_id":"pro-ject-record-puck","title":"Pro-Ject Record Puck","description":"Heavy brass record puck (0.75kg).\u003cbr\u003e\n\n","brand":"Pro-Ject","offers":[{"title":"Default Title","offer_id":57409094844748,"sku":"PROJECTRECORDPUCK","price":50.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/project_recordpuck.jpg?v=1777477986"},{"product_id":"pro-ject-78-rpm-pulley-kit","title":"Pro-Ject 78 RPM Pulley Kit","description":"Pulley Kit for playing 78 RPM records.\u003cbr\u003e\u003cbr\u003e\n\nThe 78 RPM kit contains a different belt and pulley (does not include stylus or cartridge) in order to play 78 RPM records on Pro-ject turntables. Please note that by using this kit you will lose the ability to play at 45 RPM.\u003cbr\u003e\u003cbr\u003e\n\n \n\nFor use with the following turntables only - \u003cbr\u003e\n\nDebut range (except Debut Phono SB)\u003cbr\u003e\n\nRPM 5 (any version except the RPM 5 Superpack)\u003cbr\u003e\n\nXpression (any version except the Comfort models)\u003cbr\u003e\n","brand":"Pro-Ject","offers":[{"title":"Default Title","offer_id":57409094943052,"sku":"PROJECT78RPMPULLEYKIT","price":16.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/pro-ject78rpmpulley.jpg?v=1777477991"},{"product_id":"pro-ject-lube-it","title":"Pro-Ject Lube-IT","description":"Platter bearing oil. \u003cbr\u003e\n","brand":"Pro-Ject","offers":[{"title":"Default Title","offer_id":57409095008588,"sku":"PROJECTLUBEIT","price":14.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-ject-greaseit.jpg?v=1777477995"},{"product_id":"pro-ject-level-it","title":"Pro-Ject Level IT","description":"Wooden Spirit Level.\u003cbr\u003e\n\n","brand":"Pro-Ject","offers":[{"title":"Default Title","offer_id":57409095041356,"sku":"PROJECTLEVELIT","price":16.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/project_level_it.jpg?v=1777478000"},{"product_id":"pro-ject-strobe-it","title":"Pro-Ject Strobe IT","description":"Stroboscopic measure and cartridge alignment tool for turntables.\u003cbr\u003e\n\n","brand":"Pro-Ject","offers":[{"title":"Default Title","offer_id":57409095074124,"sku":"PROJECTSTROBEIT","price":20.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/project_strobe_it.jpg?v=1777478005"},{"product_id":"pro-ject-brush-it","title":"Pro-Ject Brush IT","description":"Carbon fibre anti static record cleaning brush.\u003cbr\u003e","brand":"Pro-Ject","offers":[{"title":"Default Title","offer_id":57409095106892,"sku":"PROJECTBRUSHIT","price":8.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/project_brush_it.jpg?v=1777478009"},{"product_id":"pro-ject-cork-it","title":"Pro-Ject Cork IT","description":"\u003cp\u003eThis is a Cork mat designed to fit all Pro-Ject series turntables, except Debut II and III models (the Debut Carbon and Debut S\/E 3 are compatible). The use of Cork gives the mat special sonic qualities, well-suited to certain deck\/cartridge combinations, and also different room-types.\u003c\/p\u003e\n\u003cp\u003eThe use of cork rather than felt (which is more commonly found as a turntable mat) is actually preferred by some audiophiles, as cork causes less 'slip' effect under the record than felt does; allowing for a tighter performance. \u003cbr\u003e\u003c\/p\u003e","brand":"Pro-Ject","offers":[{"title":"Default Title","offer_id":57409095172428,"sku":"PROJECTCORKIT","price":15.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/pro-ject_cork_it.jpg?v=1777478014"},{"product_id":"pro-ject-evolution-tonearm-12cc","title":"Pro-Ject Evolution Tonearm 12cc","description":"12\" precision tonearm with carbon-fibre armtube\/headshell\u003cbr\u003e\u003cbr\u003e \n\n• Conical carbon-fibre armtube avoids standing wave reflections \u003cbr\u003e\n\n• Inverted bearing design with four hardened ABEC7 spec ballraces \u003cbr\u003e\n\n• Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle) \u003cbr\u003e\n\n• Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell \u003cbr\u003e\n\n• Highly flexible top-grade copper internal wiring \u003cbr\u003e\n\n• Gold-plated RCA phono sockets\u003cbr\u003e\u003cbr\u003e\n\n \n\n\u003cb\u003eTechnical data\u003c\/b\u003e\u003cbr\u003e\n\nHeadshell - 0.5\" (12.7mm) standard\u003cbr\u003e\n\nMounting distance - 291.6mm (platter - tonearm base)\u003cbr\u003e\n\nSupplied counterweights - cartridge weight 4 - 7g, 6 - 9g, 8 - 12g and 10 - 15g\u003cbr\u003e\n\nOptional counterweights - cartridge weight 15 - 20g and 17 - 22g\u003cbr\u003e\n\nDownforce range - 10 - 35mN\u003cbr\u003e\n\nEffective length - 12\" (304.8mm)\u003cbr\u003e\n\nEffective mass - 10.5g\u003cbr\u003e\n\nOverhang - 13.2mm\u003cbr\u003e\n\nWeight - 271g (without counterweight)\u003cbr\u003e\n","brand":"Pro-Ject","offers":[{"title":"Default Title","offer_id":57409095237964,"sku":"PROJECTEVOLUTIONTONEARM12","price":666.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/project_evolution_tonearm_12.jpg?v=1777478023"},{"product_id":"pro-ject-evolution-tonearm-10cc","title":"Pro-Ject Evolution Tonearm 10cc","description":"10\" precision tonearm with carbon-fibre armtube\/headshell \u003cbr\u003e\u003cbr\u003e\n\n• Conical carbon-fibre armtube avoids standing wave reflections \u003cbr\u003e\n\n• Inverted bearing design with four hardened ABEC7 spec ballraces \u003cbr\u003e\n\n• Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle) \u003cbr\u003e\n\n• Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell \u003cbr\u003e\n\n• Highly flexible top-grade copper internal wiring \u003cbr\u003e\n\n• Gold-plated RCA phono sockets\u003cbr\u003e\u003cbr\u003e\n\n \n\n\u003cb\u003eTechnical data\u003c\/b\u003e\u003cbr\u003e\n\nHeadshell - 0.5\" (12.7mm) standard\u003cbr\u003e\n\nMounting distance - 238mm (platter - tonearm base)\u003cbr\u003e\n\nSupplied counterweights - cartridge weight 4 - 6g, 5 - 8g, 6 - 10g and 8 - 14g\u003cbr\u003e\n\nOptional counterweights - cartridge weight 15 - 20g and 16 - 22g\u003cbr\u003e\n\nDownforce range - 10 - 35mN\u003cbr\u003e\n\nEffective length - 10\" (254mm)\u003cbr\u003e\n\nEffective mass - 8.5g\u003cbr\u003e\n\nOverhang - 16mm\u003cbr\u003e\n\nWeight - 269g (without counterweight)\u003cbr\u003e\n","brand":"Pro-Ject","offers":[{"title":"Default Title","offer_id":57409095270732,"sku":"PROJECTEVOLUTIONTONEARM10","price":625.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/project_evolution_tonearm_10.jpg?v=1777478027"},{"product_id":"pro-ject-9cc-tonearm","title":"Pro-Ject 9cc Tonearm","description":"9\" precision tonearm with carbon-fibre armtube\/headshell  \u003cbr\u003e\u003cbr\u003e\n\n \n\n\n\n• Conical carbon-fibre armtube avoids standing wave reflections \u003cbr\u003e\n\n• Inverted bearing design with four hardened ABEC7 spec ballraces \u003cbr\u003e\n\n• Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle) \u003cbr\u003e\n\n• Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell \u003cbr\u003e\n\n• Highly flexible top-grade copper internal wiring \u003cbr\u003e\n\n• Gold-plated RCA phono sockets\u003cbr\u003e\u003cbr\u003e\n\n \n\n\u003cb\u003eTechnical data\u003c\/b\u003e\u003cbr\u003e\n\nHeadshell - 0.5\" (12,7mm) standard\u003cbr\u003e\n\nMounting distance - 212mm (platter --\u0026gt; tonearm base, Linn standard)\u003cbr\u003e\n\nSupplied counterweight - cartridge weight 6 - 10g\u003cbr\u003e\n\nOptional counterweights - cartridge weight 3 - 6g, 5 - 8g and 11 - 15g\u003cbr\u003e\n\nEffective length - 9\" (230mm)\u003cbr\u003e\n\nEffective mass - 8.5g\u003cbr\u003e\n\nOverhang - 18mm\u003cbr\u003e\n\nWeight - 250g (without counterweight)\u003cbr\u003e\n\n","brand":"Pro-Ject","offers":[{"title":"with Standard Flying Lead","offer_id":57409095500108,"sku":"PROJ9CCwithStandFlyingLead","price":395.83,"currency_code":"GBP","in_stock":true},{"title":"with Standard 5-Pin DIN","offer_id":57423917678924,"sku":"PROJ9CCWITHSTAND5PINDIN","price":416.67,"currency_code":"GBP","in_stock":true},{"title":"with Linn Mountint (5-Pin DIN)","offer_id":57423917744460,"sku":"PROJ9ccLINNMOUNT5PINDIN","price":437.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/project_9cc_tonearm.jpg?v=1777478032"},{"product_id":"pro-ject-xtension-12","title":"Pro-Ject Xtension 12","description":"SPECIAL ORDER ITEM\u003cbr\u003e\u003cbr\u003e\n\nIt is apparent throughout contemporary culture that modern and classical designs are working, more than ever before, in harmony. Countless varying product categories, such as cars, watches and furniture, are all embracing the ever-popular retro trend.\u003cbr\u003e\u003cbr\u003e    \n\nThe reasoning behind this love of 'retro' is it's inherent mix of classical beauty, combined with absolute mechanical precision, high-quality components, and superior performance. \u003cbr\u003e \u003cbr\u003e  \n\nPro-ject products gave analog a new life in the nineties; our products have successfully shown that you can listen to music in a better way than with any contemporary digital medium, and it doesn't have to cost the earth.  \u003cbr\u003e \u003cbr\u003e \n\nHowever, now with the Xtension, we at Pro-Ject aim to bring back a classical analog concept from the eighties, and combine it with our advanced contemporary technologies. After eighteen years of turntable manufacturing for analog lovers on a budget, we're delighted to announce our first deck not subscribed to budgetary limitations; and boy does it deliver.  \u003cbr\u003e \u003cbr\u003e \n\n \n\nAlready, the critically acclaimed 6perspeX has proved the fantastic result of using magnets to isolate the subchassis. So consequently, for the Xtension this technology has been re-developed to utilise new magnetic feet, which almost completely decouple the main plinth. Combine this with the weighty 25kg total mass of the turntable, and the listener benefi ts from minimal base resonance. This is a unique combination of 'mass loaded' and 'floating turntable' design principals.  \u003cbr\u003e v\n\nIn keeping with these principles, the platter is metal due to its higher mass than acrylic. However, the old standard adoption of pure metal has been abandoned because of its highly-resonant tendencies. Instead, we've found a perfect alloy which we dampened on the inner side with Sorbothane®. Taking this base, we've glued recycled Vinyl records to the top (which act as a perfect mat) and bake this 'sandwich' before precision balancing it. The final product subsequently benefits from a wonderfully resonance-free, heavy platter.  \u003cbr\u003e \u003cbr\u003e \n\nAnother consideration was the amount of energy the tonearm base would have to take from arm and cartridge movement. These energies have to be controlled, as do those from the motor and the bearing (they have to be kept away from the tonearm to avoid interference). Consequently, the tonearm base on the Xtension also benefits from 'high-mass' technologies, and is isolated from the main board by a sheet of Sorbothane®. Importantly though, this board is still able to incorporate the adoption of different tonearms.\u003cbr\u003e \u003cbr\u003e   \n\nAs we originally premised with this turntable, to be in keeping with its 'classic' ethos, the Xtension comes with a beautiful dustcover with adjustable hinges, as well as several finish options in a high-gloss lacquer. Ultimately, the Xtension truly delivers a timelessly classic, exclusive analogue experience. \u003cbr\u003e \u003cbr\u003e  \n\nXtension is available in high gloss lacquer finishes: mahogany, piano and olive. \u003cbr\u003e \u003cbr\u003e  \n\n \n\nAvailable in following options:  \u003cbr\u003e \n\n• Mounted tonearm Pro-Ject 12cc Evolution  \u003cbr\u003e \n\n• Mounted tonearm Ortofon RS-309D  \u003cbr\u003e \n\n• Without tonearm  \u003cbr\u003e \u003cbr\u003e \n\nTechnical Specifications:-\u003cbr\u003e \n\nNominal speeds 33 \/ 45 \/ 78 r.p.m.  \u003cbr\u003e \nElectronic speed change 33 \/ 45 r.p.m.  \u003cbr\u003e \nMechanic speed change 78 r.p.m.  \u003cbr\u003e \nBuild in Pro-Ject Speed Box SE yes  \u003cbr\u003e \nDust cover yes  \u003cbr\u003e \nRecord weight yes  \u003cbr\u003e \nSupplied Pro-Ject phono cable Connect it 5P-C  \u003cbr\u003e \nMagnet supported, Sorbothane-damped feet yes \u003cbr\u003e  \nCentral metal block yes  \u003cbr\u003e \nSpeed variance ±0,09%  \u003cbr\u003e \nWow and flutter ±0,01% \u003cbr\u003e  \nSignal to noise -73dB \u003cbr\u003e  \nPlatter weight\/diameter 5,7kg\/300mm  \u003cbr\u003e \nPower supply type Mains-fed outboard power supply  \u003cbr\u003e \n 220 - 240V, 50 cycles or 100 - 110V, 60 cycles \u003cbr\u003e  \nOutput voltage 16V\/1.000mA AC  \u003cbr\u003e \nPower consumption 2W  \u003cbr\u003e \nDimensions (lid open) 550 x 550 x 560mm \u003cbr\u003e \nDimensions (lid closed) 550 x 250 x 450mm  \u003cbr\u003e \nWeight 20kg  \n","brand":"Pro-Ject","offers":[{"title":"(no cartridge) - Piano Black","offer_id":57409095598412,"sku":"PROJECTXTENSION12nCBLACK","price":3165.83,"currency_code":"GBP","in_stock":true},{"title":"(no cartridge) - Mahogany","offer_id":57419495899468,"sku":"PROJECTXTENSION12-MAH","price":3165.83,"currency_code":"GBP","in_stock":true},{"title":"(no cartridge) - Olive","offer_id":57419495932236,"sku":"PROJECTXTENSION12olive","price":3165.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Xtension-12-Mahogany.jpg?v=1777478041"},{"product_id":"pro-ject-6-perspex-sb","title":"Pro-Ject 6 Perspex SB","description":"'Product of the Year 2010' Hi-Fi Choice Awards 2010\u003cbr\u003e\u003cbr\u003e\n\n'Highly Commended' by Hi-Fi News.\u003cbr\u003e\u003cbr\u003e\n\nAwarded 5 Stars in What Hi-Fi?, Hi-Fi Ultimate Guide, March 2009.\u003cbr\u003e\u003cbr\u003e\n\nAwarded with the EISA Award - Best Product 2009 - 2010 European Turntable, HiFi News, October 2009.\u003cbr\u003e\u003cbr\u003e\n\n \n\n\u003cb\u003eGood sound from sound technology \u003c\/b\u003e\u003cbr\u003e\n\n• Magnet supported sub-chassis decouples platter and tonearm \u003cbr\u003e\n\n• Tonearm bearing comprises inverted hardened stainless tips in ABEC7 spec ballraces \u003cbr\u003e\n\n• Headshell and conical armtube formed from a single carbon fibre workpiece\u003cbr\u003e \n\n• Armtube allows adjustment of needle azimuth despite fixed headshell\u003cbr\u003e \n\n• Vertical tracing angle adjustable \u003cbr\u003e\n\n• MDF platter with perimeter belt drive, vinyl playing surface and record clamp\u003cbr\u003e \n\n• Inverted main bearing with ceramic thrust-pad \u003cbr\u003e\n\n• Sorbothane-damped aluminium cones \u003cbr\u003e\u003cbr\u003e\n\n \n\n\u003cb\u003eFeatures \u003c\/b\u003e\u003cbr\u003e\n\n• Pro-Ject 9cc Evolution tonearm \u003cbr\u003e\n\n• Nominal speeds 33 \/ 45 r.p.m. \u003cbr\u003e\n\n• Record clamp \u003cbr\u003e\n\n• Gold-plated RCA phono sockets \u003cbr\u003e\n\n• Dust cover \u003cbr\u003e\n\n• Transparent acrylic plinth \u003cbr\u003e\n\n• Pro-Ject spirit level supplied\u003cbr\u003e\u003cbr\u003e\n\n \n\n\u003cb\u003eTechnical data\u003c\/b\u003e\u003cbr\u003e\n\nNominal speeds - 33 \/ 45 r.p.m.\u003cbr\u003e\n\n\nDust cover - yes\u003cbr\u003e\n\n\nMagnet supported sub-chassis - yes\u003cbr\u003e\n\n\nRecord clamp - yes\u003cbr\u003e\n\n\nRCA phono sockets - yes\u003cbr\u003e\n\n\nSorbothane-damped aluminium cones - yes\u003cbr\u003e\n\n\nTonearm - Pro-Ject 9cc Evolution\u003cbr\u003e\n\n\nCarbon-fibre headshell and armtube - yes\u003cbr\u003e\n\n\nEffective tonearm length - 9 \" (230mm)\u003cbr\u003e\n\n\nEffective tonearm mass - 8g\u003cbr\u003e\n\n\nOverhang - 18mm\u003cbr\u003e\n\n\nSupplied counterweights - cartridge weights 5 - 7,5g, 7 - 10g, 9 - 11g and 10 - 14g\u003cbr\u003e\n\n\nDownforce range - 10 - 35mN\u003cbr\u003e\n\n\nSpeed variance - ±0,5 %\u003cbr\u003e\n\n\nWow and flutter - ±0,06 %\u003cbr\u003e\n\n\nSignal to noise - -73dB\u003cbr\u003e\n\n\nPlatter weight\/diameter - 2kg\/300mm\u003cbr\u003e\n\n\nPower supply type - Mains-fed outboard power supply 220 - 240V, 50 cycles or 100 - 110V, 60 cycles\u003cbr\u003e\n\n\nOutput voltage - 16V\/500mA AC\u003cbr\u003e\n\n\nPower consumption - 2W\u003cbr\u003e\n\n\nDimensions (lid open) - 460 x 420 x 465mm\u003cbr\u003e\n\n\nDimensions (lid closed) - 460 x 160 x 365mm\u003cbr\u003e\n\n\nWeight - 10,5kg\u003cbr\u003e\n\n\nDimensions (W x H x D)\u003cbr\u003e\n\n","brand":"Pro-Ject","offers":[{"title":"Default Title","offer_id":57409095729484,"sku":"PROJECT6PERSPEX","price":1291.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/project_6PSX.jpg?v=1777478050"},{"product_id":"pro-ject-essential-ii-digital","title":"Pro-Ject Essential II Digital","description":"Essential II Digital\u003cbr\u003e\u003cbr\u003e\n\nThe multi-award winning Essential II turntable from Pro-Ject Audio Systems has been a huge success since its launch back in 2013. The simplistic yet elegant design built on solid hi-fi principles has delivered a great turntable at an affordable price. But now Pro-Ject have taken their own traditional design, and completely revolutionised it to accommodate the needs of the modern vinyl listener.\u003cbr\u003e\u003cbr\u003e\n\nThe Essential II Digital aims to be the first turntable that can be connected straight out of the box to any modern hi-fi system. The brand new integrated phono stage gives users the option between an analogue line level output or a 24-bit\/96kHz digital Optical output. The Optical output uses a high-quality Analogue-Digital Converter (ADC) to send a clean, uninterrupted signal to any digital hub. So whether listening to music through a soundbar, an AV receiver, a DAC, a digital pre-amplifier or a multi-room system with different input options - the Essential II Digital should fit in flawlessly. The analogue output uses a phono stage based upon Pro-Ject's iconic Phono Box design to deliver a brilliant performance from the fitted Ortofon cartridge.\u003cbr\u003e\u003cbr\u003e\n\nThe added benefit of optical transmission is that you can run longer cables without the same signal loss you would experience with long RCA leads. So if you want your turntable to sit away from your amplifier while still sounding great, that's now possible!\u003cbr\u003e\u003cbr\u003e\n\nThe Essential II Digital further stands out from those around it thanks to the new black and white high-gloss paint finishes, and the \"Digital\" logo emblazoned on the plinth. It also boasts all the pre-existing features that have made the Essential II an international award winner. The 8.6\" aluminium tonearm, heavy particle-board platter and low-voltage motor with perimeter drive belt make a winning combination; while the Ortofon OM 5E is the perfect cartridge to get instant gratification from your vinyl collection.\u003cbr\u003e\u003cbr\u003e\n\nKey Features:-\u003cbr\u003e\n•Ideal for connection to multiroom systems or TVs, soundbars and portable audio (see our FAQ)\u003cbr\u003e\n•Belt drive with silicone belt\u003cbr\u003e\n•Low vibration synchronous motor\u003cbr\u003e\n•Integrated motor control with DC power supply secures silent running\u003cbr\u003e\n•Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom\u003cbr\u003e\n•8.6\" aluminium tonearm with sapphire bearings\u003cbr\u003e\n•Factory fitted Ortofon OM 5E cartridge\u003cbr\u003e\n•Built in phono stage based on Phono Box design\u003cbr\u003e\n•High-quality optical output\u003cbr\u003e\n•Special turntable feet for effective decoupling\u003cbr\u003e\n•Lid \u0026amp; felt mat included\u003cbr\u003e\u003cbr\u003e\n\nTechnical Specifications:- \u003cbr\u003e\nReplacement Stylus: Ortofon Stylus 5E \u003cbr\u003e\nPre-Fitted Cartridge:  Ortofon OM 5E\u003cbr\u003e \nNominal Speeds: 33 \/ 45 RPM (Manual)\u003cbr\u003e \nSpeed Variance: 33: 0.80% \/  45: 0.70% \u003cbr\u003e\nWow \u0026amp; Flutter: 33: 0.29% \/  45: 0.27% \u003cbr\u003e\nPlatter: 300mm (Particle Board)\u003cbr\u003e \nMain Bearing: Stainless steel \u003cbr\u003e\nNoise Floor::  \u0026gt; 73dB\u003cbr\u003e  \nEffective Tonearm Length: 8.6\" (218.5mm) \u003cbr\u003e \nEffective Tonearm Mass:  8.0gr \u003cbr\u003e\nCounterweight for Mass: 3 - 5.5g (Incl.)  \u003cbr\u003e\nOverhang: 22.0mm  \u003cbr\u003e\nTracking Force Range:  0 - 25mn  \u003cbr\u003e\nOutputs:  RCA or Optical \u003cbr\u003e \nRIAA Accuracy: 20Hz - 20kHz \/ Max. 0.5dB \u003cbr\u003e\nLine Output Level: 160mV \/ 1kHz\u003cbr\u003e\n(at 4mV \/ 1kHz input) \u003cbr\u003e\nOptical Output:  24-bit \/ 96kHz \u003cbr\u003e \nPower Consumption: 4.5W  \u003cbr\u003e\nPower Supply:  15V\/500mA DC  \u003cbr\u003e\nIncluded Accessories: Felt Mat, Dust Cover, RCA Cable \u003cbr\u003e\nDimensions: 420 x 112 x 330mm  \u003cbr\u003e\nWeight: 4kg ","brand":"Pro-Ject","offers":[{"title":"Black","offer_id":57409096122700,"sku":"PROJECTESSENTIAL2DIG-B","price":257.5,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":57419500355916,"sku":"PROJECTESSENTIAL2DIG-W","price":257.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Essential-II-Digital.jpg?v=1777478075"},{"product_id":"pro-ject-debut-carbon-esprit-sb","title":"Pro-Ject Debut Carbon Esprit SB","description":"\u003cp\u003eThe all-new Debut Carbon Esprit SB turntable from Pro-Ject Audio takes the hugely successful, multi-award winning Carbon design and adds even more to the already impressive package. On top of the new 8.6CC carbon fibre tonearm, new power supply method, improved motor isolation, pre-installed Ortofon 2M Red and new cable junction box found on the standard Debut Carbon; the Esprit SB version also uses a totally new speed control principle to allow for easy changing between 33 1\/3 RPM and 45RPM. The deck can also spin at 78 RPM by switching the pulley to the larger rung and setting the speed changer to '45\/78' (Please Note: 78 RPM records require a special stylus - we recommend the 2M 78 Stylus for this turntable).\u003c\/p\u003e\n\u003cp\u003eAs well as being convenient, the speed control system also allows for smoother motor operation - further reducing unwanted resonances along with the improved motor isolation. The new motor isolation system utilises a wholly unique rubber compound developed exclusively by Ortofon A\/S to offer dramatically reduced resonance transference from the high-quality 9V motor the turntable employs.\u003c\/p\u003e\n\u003cp\u003eAnother sonic benefit is found in the Esprit's included platter upgrade. Acrylic is a an excellent playback platform, as it offers almost no resonance in the audible frequencies and negates the need for a slipmat which can sometimes cause problems.\u003c\/p\u003e\n\u003cp\u003eThe Debut Carbon Esprit SB is available in three stylish, high-gloss colours.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eKey Features:\u003c\/p\u003e\n\u003cp\u003eDebut Carbon turntable with built-in speed control\u003cbr\u003e12\" Acryl-IT Platter supplied\u003cbr\u003e8.6CC carbon fibre tonearm\u003cbr\u003eOrtofon 2M Red, pre-installed\u003cbr\u003eNew motor isolation system, designed by Ortofon A\/S\u003cbr\u003eCable junction box included, for easy cable upgrade\u003cbr\u003eNew power supply method\u003cbr\u003eAvailable in Black, Red and White High-Gloss\u003cbr\u003eLid included\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eKey Technical Data:\u003cbr\u003eNominal Speeds:\u003cbr\u003e33\/45\/78 RPM\u003cbr\u003eTonearm: 8.6CC Carbon Fibre\u003cbr\u003eEffective Tonearm Length: 8.6\" (218.5mm)\u003cbr\u003ePre-Fitted Cartridge: Ortofon 2M Red \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDimensions (W x H x D):\u003cbr\u003e415 x 118 x 320mm\u003cbr\u003e415 x 365 x 405mm (Open Lid)\u003cbr\u003eWeight: 4.9kg\u003c\/p\u003e","brand":"Pro-Ject","offers":[{"title":"Gloss Black","offer_id":57409344209228,"sku":"PROJECTDCESPRITSBB","price":390.83,"currency_code":"GBP","in_stock":true},{"title":"Gloss Red","offer_id":57420118851916,"sku":"PROJECTDCESPRITSBR","price":390.83,"currency_code":"GBP","in_stock":true},{"title":"Gloss White","offer_id":57420119245132,"sku":"PROJECTDCESPRITSBW","price":390.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/pro-ject-debut-carbon-esprit-sb-red.jpg?v=1777483324"},{"product_id":"pro-ject-elemental-turntable","title":"Pro-Ject Elemental Turntable","description":"The new Elemental table is a real \"plug'n'play\" turntable. No adjustment of counterweight and anti-skating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for the Ortofon OM cartridge series.\u003cbr\u003e\u003cbr\u003e \n\nAll the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in. \u003cbr\u003e\u003cbr\u003e\n\nThe hidden secret to the new 'table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.\u003cbr\u003e\u003cbr\u003e\n\nThe Elemental also comes in a Phono USB model\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\n\nKey Features:\u003cbr\u003e\n•Belt drive system with low vibration DC motor\u003cbr\u003e\n•Central gravity mass point made from artificial stone\u003cbr\u003e\n•Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom\u003cbr\u003e\n•Low resonance MDF platter with felt mat\u003cbr\u003e\n•Factory fitted Ortofon OM5e cartridge\u003cbr\u003e\n•8.6” ultra low mass tonearm with straight arm tube\u003cbr\u003e\n•Pre-adjusted tracking force \u0026amp; antiskating\u003cbr\u003e\n•Gold-plated RCA contacts \u0026amp; cartridge pins","brand":"Pro-Ject","offers":[{"title":"Red","offer_id":57409364361548,"sku":"PROJECTELEMENTALR","price":145.83,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":57420219482444,"sku":"PROJECTELEMENTALB","price":145.83,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":57420219711820,"sku":"PROJECTELEMENTALW","price":145.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/pro-ject-elemental-turntable-red.jpg?v=1777483901"},{"product_id":"pro-ject-elemental-phono-usb-turntable","title":"Pro-Ject Elemental Phono USB Turntable","description":"The new Pro-ject Elemental Phono USB table is a real \"plug'n'play\" all the way. No adjustment of counterweight and anti-skating is needed, because both are pre-adjusted. This new straight tonearm is optimised for Ortofon OM cartridge series.\u003cbr\u003e\u003cbr\u003e\n\nAll the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it into hi-fi system and computer. \u003cbr\u003e\u003cbr\u003e\n\nThe hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards and vinyl recording capability.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\nKey Features:\u003cbr\u003e\n•Belt drive system with low vibration DC motor\u003cbr\u003e\n•Central gravity mass point made from artificial stone\u003cbr\u003e\n•Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom\u003cbr\u003e\n•Low resonance MDF platter with felt mat\u003cbr\u003e\n•8.6” ultra low mass tonearm with straight arm tube\u003cbr\u003e\n•Pre-adjusted tracking force \u0026amp; antiskating\u003cbr\u003e\n•Gold-plated RCA contacts \u0026amp; cartridge pins\u003cbr\u003e\n•Integrated phono stage with precise RIAA equalisation\u003cbr\u003e\n•A\/D converter for vinyl recording with USB B output","brand":"Pro-Ject","offers":[{"title":"Red","offer_id":57409364656460,"sku":"PROJECTELEMENTALUSBR","price":190.83,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":57420220236108,"sku":"PROJECTELEMENTALB","price":190.83,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":57420220367180,"sku":"PROJECTELEMENTALUSBW","price":190.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/pro-ject-elemental-turntable-red_639d321c-c0c5-430d-8528-8bff950ee570.jpg?v=1777483905"},{"product_id":"pro-ject-stream-box-ds-net","title":"Pro-Ject Stream Box DS Net","description":"Same features as AWARD WINNING audiophile grade highend  \n\n   audio streaming client Stream Box DS \u003cbr\u003e \n\n NEW ALAC playback and cover art support\u003cbr\u003e  \n\n NEW NetAPI implemented, a unique and proprietary  \n\n   development, that allows use of:-  \n\n  Free Box Control APP, for ultra-fast access of your  \n\n       favourite music via smartphone \u003cbr\u003e\n\n   Unique prospective features, that only will be possible through NetAPI platform \u003cbr\u003e\n\n  Remote Box, which will be available optionally in near future. It will enable your smartphone to act as universal IR remote, pre-programmed for all Box Design components and suitable for 3rd party devices, like TV. \u003cbr\u003e\u003cbr\u003e  \n\n\n \n\n• Luxury 3,5” TFT colour display that shows album cover art \u003cbr\u003e \n\n• Solid metal casework protects sensible electronics from vibration and RF interference \u003cbr\u003e \n\n• Gapless playback for all formats \u003cbr\u003e \n\n• Apple-licensed digital USB input \u003cbr\u003e \n\n• Internetradio platform vTuner built-in  \u003cbr\u003e\n\n• Using streaming services, like Spotify, Deezer, Grooveshark, Simfy, ...with Jamcast software  \u003cbr\u003e\n\n• Direct streaming from portable devices \u003cbr\u003e \n\n• AIFF, FLAC, WMA9lossless, ALAC and AAC playback and cover art supported \u003cbr\u003e \n\n• DC power supply (1 watt standby power)  \u003cbr\u003e\u003cbr\u003e\n\n\n\n\n\n\n\n\n\nTechnical specifications:\u003cbr\u003e \u003cbr\u003e   \n\n  \n\nAUDIO FORMATS: MP3, FLAC (up to 24bit\/192kHz including 24\/176),  \n WMA9-lossless, AIFF, AAC, ALAC, LPCM (WAV, up to 24bit\/192kHz), Ogg Vorbis 1.0\u003cbr\u003e  \nINTERNETRADIO: vTuner included\u003cbr\u003e   \nGAPLESS: all audio formats (using IR control) \u003cbr\u003e  \nINPUT: Network and USB 2.0\u003cbr\u003e   \nOUTPUT: RCA (analogue, fixed volume level)  \n Coax S\/PDIF (digital)\u003cbr\u003e   \nNETWORK: Wi-Fi IEEE 802.11 b\/g and Ethernet RJ45\u003cbr\u003e   \nFACEPLATE: black or silver \u003cbr\u003e  \nDIMENSIONS: 72 x 206 x 194 mm (HxWxD) without antenna \u003cbr\u003e  \nWEIGHT: 2,60 kg  \n","brand":"Pro-Ject","offers":[{"title":"Black Faceplate","offer_id":57409450443084,"sku":"PROJECTSTREAMBOXDSNETB","price":540.83,"currency_code":"GBP","in_stock":true},{"title":"Silver Faceplate","offer_id":57420889555276,"sku":"PROJECTSTREAMBOXDSNETS","price":540.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-ject-Stream-Box-DS-Net-Black.jpg?v=1777486023"},{"product_id":"pro-ject-dac-box-ds2-ultra","title":"Pro-Ject DAC Box DS2 Ultra","description":"DAC Box DS2 Ultra\u003cbr\u003e\u003cbr\u003e\n\nThe DAC Box DS2 Ultra is a true high-end digital-analogue converter, with optimal fidelity and a wide feature set for use in almost any digital hi-fi system.\u003cbr\u003e\u003cbr\u003e\n\nBuilt around the premium Asahi Kasei Microdevices AK4490 DAC chip, the DAC Box DS2 Ultra works with digital signals up-to 32-bit \/ 768kHz and DSD256 (DoP). The additional AK4137EQ sample rate converter with Velvet Sound technology up-scales all signals to 768kHz for minimal signal loss and enables the built-in filters (5 to choose from) and sound modes (3 to choose from) to have a greater impact. With this chip set configuration, the DAC Box DS2 Ultra can deliver the same rich, musical sound-field, with accurate bass reproduction and minimal distortion, as the superior Pre Box DS2 Digital.\u003cbr\u003e\u003cbr\u003e\n\nThe DAC Box DS2 boasts six digital input options. The two coaxial and three optical inputs are limited to 24-bit \/ 192kHz signals, where the more advanced signals are reserved for the Type-B USB input. The USB input utilises asynchronous USB technology, based on XMOS designs, for playback of high-resolution files. This high-resolution coverage spreads to 11.2MHz DSD256 files, where the design of the DAC uses DSD Direct Path for un-modulated signal transmission (DoP).\u003cbr\u003e\u003cbr\u003e\n\nOperation of the DAC Box DS2 Ultra is effortlessly simple via the clearly marked front-panel controls. Internally, it boasts the same 4-layer PCB boards as other DS2 products, and the output stage is configured with solid-state Class A circuitry for added analogue warmth and low output impedance.\u003cbr\u003e\u003cbr\u003e\n\nThe DAC Box DS2 Ultra is a real high-end offering for digital audio enthusiasts who demand the most from their hi-fi equipment.  \u003cbr\u003ev\n\nKey Features:-\u003cbr\u003e\n•Top-grade AK4490 D\/A chip (32-bit PCM 768kHz \/ DSD256)\u003cbr\u003e\n•6 Inputs: 1x USB, 3x optical (TOSlink®), 2x coax (S\/PDIF)\u003cbr\u003e\n•Up to 32bit\/768kHz asynchronous USB (XMOS technology)\u003cbr\u003e\n•DSD64, DSD128 \u0026amp; DSD256 (DSD over PCM)\u003cbr\u003e\n•Audio Class 2 (USB 2.0 High Speed) driver for Windows included\u003cbr\u003e\n•Up to 24bit\/192kHz for optical \u0026amp; coax inputs\u003cbr\u003e\n•5 selectable digital filter characteristics\u003cbr\u003e\n•3 selectable sound modes\u003cbr\u003e\n•High-end ultra low phase oscillator with superior noise rejection\u003cbr\u003e\n•RCA line level solid-state analogue output stage\u003cbr\u003e\n•Ultra linear \u0026amp; ultra low noise circuitry\u003cbr\u003e\n•Separate power supplies for every stage with advanced filter technology\u003cbr\u003e\n•Upgradeable with optional linear power supply Power Box DS2 Sources\u003cbr\u003e\n•Full metal casing in silver or black\u003cbr\u003e\u003cbr\u003e\n\nTechnical Specifications:-\u003cbr\u003e\n\nD\/A Converter: AK4490 32-bit PCM 768kHz \/ DSD256 \u003cbr\u003e\nSampling Rate Converter:  AK4137EQ Upsampling to 768kHz \u003cbr\u003e\nSampling Rates: 32 \/ 44.1 \/ 48 \/ 88.2 \/ 96 \/ 176.2 \/ 192 \/ 352.8 \/ 384 \/ 768 kHz \u003cbr\u003e\nDSD Support:  DSD64, DSD128, DSD256 \u003cbr\u003e\nSelectable Filters: 5\u003cbr\u003e \nDigital Inputs: \u003cbr\u003e\n2x Coax (S\/PDIF)\u003cbr\u003e\n3x Optical (Toslink®)\u003cbr\u003e\n1x Type-B USB\u003cbr\u003e \nFrequency Response:  20Hz - 50kHz (+0 \/ -1dB) \u003cbr\u003e \nAnalogue Output: 1x RCA Pair \u003cbr\u003e\nDigital Ouputs: 1x Optical (TOSlink) \u003cbr\u003e\nTHD:  0.00085% \u003cbr\u003e\nCrosstalk:  -117dB (10kHz @ 0dB)\u003cbr\u003e  \nSignal To Noise (20Hz - 20kHz):  113dB v\nPower Consumption: Standby: \u0026lt; 1W Maximum: 300mA\u003cbr\u003e\nPower Supply: 18V \/ 1A DC\u003cbr\u003e \nDimensions (Incl. Sockets): 240 x 72 x 220mm\u003cbr\u003e \nWeight: 2.07kg ","brand":"Pro-Ject","offers":[{"title":"Black","offer_id":57409450606924,"sku":"PROJECTDACBOXDS2ULTRA-B","price":458.33,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":57420896469324,"sku":"PROJECTDACBOXDS2ULTRA-S","price":458.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-DAC-Box-DS2-Ultra-Black-Euc.jpg?v=1777486036"},{"product_id":"pro-ject-amp-box-s2","title":"Pro-Ject Amp Box S2","description":"The Amp Box S2 is designed to deliver room-filling sound to almost any loudspeaker.\u003cbr\u003e\u003cbr\u003e\n\nDespite its small dimensions, the Amp Box S2 delivers sound characteristics similar to that of a tube amplifier, with a rich musical performance and a touch of analogue warmth. The advanced amplifier modules used are highly efficient, easily driving almost any loudspeaker with almost no energy wastage.\u003cbr\u003e\u003cbr\u003e \n\nThe small size makes Amp Box S2 easy to place in any living space. Partner with a Box Design S2 (or any other) pre-amplifier by the RCA inputs and build a compact hi-fi system that delivers a premium sound. The 12V trigger input allows the amplifier turn on in tandem with the Pre Box S2 Analogue, while the Trigger Output allows for bi- or even tri-amplification systems. The isolated speaker terminals provide a solid and reliable connection to your loudspeakers.\u003cbr\u003e\u003cbr\u003e\n\nHoused within the improved S2 chassis, the Amp Box S2 is a premium device that belies the price.\u003cbr\u003e\u003cbr\u003e\n\nKey Features:\u003cbr\u003e\n•Ultra compact power amplifier\u003cbr\u003e\n•Audiophile, tube-like sound performance\u003cbr\u003e\n•Advanced amplifier module used\u003cbr\u003e\n•Stereo input (RCA)\u003cbr\u003e\n•Isolated speaker sockets\u003cbr\u003e\n•Suitable for Banana\/Spade\/Pin\/bare wire\u003cbr\u003e\n•Trigger input\u003cbr\u003e\n•Trigger output for adding more Amp Box S2s\u003cbr\u003e\n•Premium S2 chassis\u003cbr\u003e\n•Available in black or silver\u003cbr\u003e\u003cbr\u003e\n\nTechnical Specifications:- \u003cbr\u003e\nPower Output: 2x 26W at 8Ω\u003cbr\u003e\n2x 43W at 4Ω \u003cbr\u003e\nFrequency Response: 5Hz - 20kHz (+ 0dB, - 0.5dB) \u003cbr\u003e\nChannel Separation: \u0026gt; 40dB At 20kHz\u003cbr\u003e \nSignal-to-noise ration:  76dB \u003cbr\u003e\nTHD: \u0026lt; 0.05% At 10W \u003cbr\u003e\nGain: 32dB \u003cbr\u003e\nInput: 1x Pair RCA Sockets \u003cbr\u003e\nInput Sensitivity: 1V \u003cbr\u003e\nInput Impedance: 47kΩ \u003cbr\u003e\nSpeaker sockets: 4mm Ø Banana, spades. Pins or bare wire \u003cbr\u003e\nTrigger: 12V DC \u003cbr\u003e \nTrigger In\/Out: 2-pole jack socket Ø 2.5mm \u003cbr\u003e\nDimensions: 103 x 36 x 118mm \u003cbr\u003e\nWeight: 670g (Without PSU) ","brand":"Pro-Ject","offers":[{"title":"Silver","offer_id":57409452507468,"sku":"PROJECTAMPBOXS2-S","price":166.67,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":57420907184460,"sku":"PROJECTAMPBOXS2-B","price":166.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Amp-Box-S2-Black.jpg?v=1777486089"},{"product_id":"pro-ject-pre-box-s2-analogue","title":"Pro-ject Pre Box S2 Analogue","description":"Pre Box S2 Analogue\u003cbr\u003e\u003cbr\u003e\n\nThe Pre Box S2 Analogue is a compact pre-amplifier for integrating into hi-fi systems where space is at a premium.\u003cbr\u003e\u003cbr\u003e\n\nWith three stereo Line Level (2x RCA pair, 1x 3.5mm jack) inputs, the diminuitive Pre Box S2 Analogue can accomodate three full-size source devices with ease. The stereo Pre Output allows for connection to a power amplifier (ideally the matching Amp Box S2), while the additional 3.5mm Fixed Output allows for onward connection to a subwoofer, or even an analogue headphone amplifier for private listening sessions. \u003cbr\u003e\u003cbr\u003e\n\nInternally the advanced circuitry of the Pre Box S2 Digital ensures the electrical signal is handled with care and accuracy, achieving incredibly low harmonic distortion levels for a clean, pure, analogue audio performance.\u003cbr\u003e\u003cbr\u003e \n\nThe Pre Box S2 Analogue has a 12V trigger output, so it can turn on connected devices - such as the Amp Box S2 or Switch Box S - for improved comfort and convenience. Power is provided by the included power supply, but you can upgrade your convenience further by switching to any 5V power bank. Housed within the improved S2 chassis, the overall build, convenience and performance of the Pre Box S2 Analogue is enviable for the price.\u003cbr\u003e\u003cbr\u003e\n\nKey Features:\u003cbr\u003e\n•Advanced circuitry with premium components\u003cbr\u003e\n•Neutral sound with superior low noise floor\u003cbr\u003e\n•Three Stereo Line inputs (one mini-jack, two RCA pair)\u003cbr\u003e\n•Stereo Pre-Out and mini-jack Fixed Output\u003cbr\u003e\n•Motorised volume control\u003cbr\u003e\n•SMD design for short signal paths\u003cbr\u003e\n•Low output impedance for minimal loss with long cables\u003cbr\u003e\n•Gold-plated connections\u003cbr\u003e\n•Remote control for on\/off, input select and volume adjust\u003cbr\u003e\n•Trigger outputs for Amp Box and Switch Box\u003cbr\u003e\n•Premium S2 chassis\u003cbr\u003e\n•Available in black or silver\u003cbr\u003e\u003cbr\u003e\n\nTechnical Specifications:-\u003cbr\u003e\n\nFrequency Response: 20Hz - 80kHz \u003cbr\u003e\nNoise Floor: -105dB (A weighted) \u003cbr\u003e\nTHD+N: 0.0005% \u003cbr\u003e\nGain: 8.5dB \u003cbr\u003e\nPre-Out: 1x RCA (pair)\u003cbr\u003e \nFixed Output: 1x 3.5mm \u003cbr\u003e\nOutput Voltage Typically: 1V at 1kHz \u003cbr\u003e\nLine-Level Inputs: 2x RCA (pair), 1x 3.5mm \u003cbr\u003e\nInput Impedance: 15kΩ \u003cbr\u003e\nTrigger Out: 2-Pole, 2.5mm Co-Axial Jack \u003cbr\u003e\nOutboard PSU: 5V\/500mA DC\u003cbr\u003e \nStandby Power Usage: \u0026lt; 1W \u003cbr\u003e\nDimensions: 103 x 37 x 120mm \u003cbr\u003e\nWeight: 405g (Without PSU)","brand":"Pro-Ject","offers":[{"title":"Black","offer_id":57409452573004,"sku":"PROJECTPREBOXS2-B","price":179.17,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":57420911083852,"sku":"PROJECTPREBOXS2-S","price":179.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Pre-Box-S2-Anal-Black.jpg?v=1777486098"},{"product_id":"pro-ject-stereo-box-s-phono","title":"Pro-Ject Stereo Box S Phono","description":"Stereo Box S Phono\u003cbr\u003e\u003cbr\u003e\n\nS-Line\u003cbr\u003e\u003cbr\u003e\n\nThe Pro-Ject Stereo Box S Phono is a combination of the Stereo Amp Box S, Pre Box S and Phono MM, in one stylish body, offering exceptional sound quality. The new \"S\" body design makes the Stereo Box S Phono a slim and elegant looking device.\u003cbr\u003e\u003cbr\u003e\n\nThe amplifier can be controlled with a slim-line IR remote, or via the simple and minimal front-facing controls.\u003cbr\u003e\u003cbr\u003e\n\nThe built in phono stage is capable of accommodating your moving magnet cartridge with ease so no matter what MM cartridge you have you're covered.\u003cbr\u003e\u003cbr\u003e\n\nAvailable with a Black or Silver faceplate.\u003cbr\u003e\u003cbr\u003e\n\n*Please note: first generation Stereo Box S Phono (with toggle power switch, rather than push button) cannot be switched off via the remote control. They can only be turned on and off using the switch on the front panel.\u003cbr\u003e\u003cbr\u003e\n\nKey Features:-\u003cbr\u003e\n•2x 37 watts at 4Ω\u003cbr\u003e\n•2 ohm drive capability\u003cbr\u003e\n•Low noise pure analogue audio circuitry\u003cbr\u003e\n•Dual mono design principleV\n•3 stereo lines and phono input (RCA)\u003cbr\u003e\n•Motor drive potentiometer\u003cbr\u003e\n•IR remote included \u003cbr\u003e\n•2 different face-plate colours, black or silver \u003cbr\u003e\u003cbr\u003e\n\nTechnical Specifications:-\u003cbr\u003e\n\nOutput Power: 2x 25W at 8Ω\u003cbr\u003e\n2x 37W at 4Ω \u003cbr\u003e\nFrequency Response: 20Hz - 20kHz (- 0.3dB, -2.5dB) \u003cbr\u003e\nChannel Separation:  \u0026gt; 40dB at 20kHz \u003cbr\u003e \nNoise Floor:  \u0026gt; -100dB (A weighted)\u003cbr\u003e  \nTHD:  \u0026lt; 0.05% at 10W \u003cbr\u003e \nGain:  22dB \u003cbr\u003e \nLine-Level Inputs: 2x Pair RCA\/Phono Sockets\u003cbr\u003e\n1x 3.5mm Co-Axial Jack\u003cbr\u003e \nPhono Amplifier: Moving Magnet (MM) \u003cbr\u003e\nRIAA- EQ Curve Accuracy:  20Hz - 20kHz \/ Max. 0.5dB  \u003cbr\u003e\nInput Impedance:  20kohms \u003cbr\u003e\nSpeaker Connections:  4mm Banana Plugs\u003cbr\u003e\n Spades Connectors\u003cbr\u003e\n or Naked Wire \u003cbr\u003e\nPower Supply: 20V\/3A DC \u003cbr\u003e\nPower Consumption: 3A DC, \u0026lt; 1W In Standy \u003cbr\u003e\nDimensions: 206 x 40 x 150mm \u003cbr\u003e\n206 x 40 x 165mm (Incl. Sockets) \u003cbr\u003e\nWeight: 1250g (Without PSU) ","brand":"Pro-Ject","offers":[{"title":"Silver Faceplate","offer_id":57409452769612,"sku":"PROJECTSTBOXSPHONO-S","price":182.5,"currency_code":"GBP","in_stock":true},{"title":"Black Faceplate","offer_id":57420911477068,"sku":"PROJECTSTERBOXSPHONO-B","price":182.5,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":57423046345036,"sku":"PROJECTSTEREOBOXSPHONO-S","price":182.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Stereo-Box-S-Phono-Silver.jpg?v=1777486107"},{"product_id":"pro-ject-switch-box-s","title":"Pro-Ject Switch Box S","description":"Features:-\u003cbr\u003e\u003cbr\u003e\n\n 4 inputs \u003cbr\u003e \n\n• 2 line outputs for separate usage  \u003cbr\u003e\n\n• Suitable for amplifiers (Pro-Ject Audio or other brands)\u003cbr\u003e  \n\n• three-input expansion for Pre Box S \u003cbr\u003e \n\n• Ultra-low crosstalk\u003cbr\u003e  \n\n• Automatic synchronisation with trigger cable of Pre Box S\u003cbr\u003e  \n\n• Solid cabinet protects against vibration and interference\u003cbr\u003e  \n\n• Faceplate silver or black \u003cbr\u003e\u003cbr\u003e\n\nSpecifications:-\u003cbr\u003e\u003cbr\u003e\n\nGain 0dB  \u003cbr\u003e\nLine-level inputs 1 pair RCA\/Phono sockets,  \n 3 x 3-pole co-axial Ø 3,5mm jack \u003cbr\u003e \nLine-level outputs 1 pair RCA\/Phono sockets,  \n 3-pole co-axial Ø 3,5mm jack  \u003cbr\u003e\nTrigger input 2-pole co-axial Ø 2,5mm jack \u003cbr\u003e \nOutboard power supply 16V\/200mA AC, suitable for your  \n country's mains supply  \u003cbr\u003e\nPower consumption 16V\/30mA AC \u003cbr\u003e \nDimensions W x H x D 103 x 36 x 103mm \u003cbr\u003e \nDimensions W x H x D with sockets 103 x 36 x 109mm \u003cbr\u003e \nWeight 560g without power supply \n ","brand":"Pro-Ject","offers":[{"title":"Silver Faceplate","offer_id":57409452966220,"sku":"PROJECTSWITCHBOXSS","price":99.17,"currency_code":"GBP","in_stock":true},{"title":"Black Faceplate","offer_id":57420911706444,"sku":"PROJECTSWITCHBOXSB","price":99.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Switch-Box-S-Silver.jpg?v=1777486111"},{"product_id":"pro-ject-head-box-s2-analogue","title":"Pro-Ject Head Box S2 Analogue","description":"Head Box S2\u003cbr\u003e\u003cbr\u003e\n\nThe Pro-Ject Head Box S2 has enough power to unleash the best sound quality from any headphone. It features a rich and full sound performance with plenty of dynamics and impressive transparency.\u003cbr\u003e\u003cbr\u003e\n\nThe new S2 casing is a big asset to the design, as not only does it deliver the highest visual appeal, but it is also sturdy enough to protect the internal circuitry against unwanted interferences and vibrations, which can cause unpleasant listening experiences.\u003cbr\u003e\u003cbr\u003e\n\nOnly the best possible components were used to create this unique headphone amplifier. Due to its low price combined with versatility, power and high quality, the Head Box S2 is a true audiophile bargain!\u003cbr\u003e\u003cbr\u003e\n\nKey Features:-\u003cbr\u003e\n•Suitable for demanding headphones\u003cbr\u003e\n•6.35mm and 3.5mm headphone output\u003cbr\u003e\n•Bypass RCA loop output for additional amplifier\u003cbr\u003e\n•Both outputs usable simultaneously\u003cbr\u003e\n•Superior low distortion\u003cbr\u003e\n•Low noise components for ultimate sound performance\u003cbr\u003e\n•Premium S2 chassis\u003cbr\u003e\n•Available in black or silver\u003cbr\u003e\u003cbr\u003e\n\nTechnical Specifications:- \u003cbr\u003e\n\nPower Output:  725 mW (into 32ohms) \u003cbr\u003e  \nSignal-to-noise ratio:  -110dBV \u003cbr\u003e\nTHD +N:  \u0026lt; 0.002%\u003cbr\u003e \nGain:  11dB \u003cbr\u003e\nCrosstalk:  68dB \u003cbr\u003e\nFrequency response:  20Hz - 80kHz (+-0.2dB)\u003cbr\u003e  \nAnalogue Inputs:   1 pair RCA\/Cinch sockets   line \u003cbr\u003e\nHeadphone Output:  1x 6.3mm jack, 1x 3.5mm\u003cbr\u003e \nAnalogue Loop Outputs:  1 pair RCA\/Cinch\u003cbr\u003e \nPower Supply:  5V\/0.5A DC\u003cbr\u003e \nStandby Power Consumption:  \u0026lt; 0.5W \u003cbr\u003e\nDimensions:  103 x 37 x 120 mm \u003cbr\u003e\nWeight:  365g (Without PSU) \n","brand":"Pro-Ject","offers":[{"title":"Silver","offer_id":57409453556044,"sku":"PROJECTHEADBOXSS","price":95.83,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":57420913443148,"sku":"PROJECTHEADBOXS2B","price":95.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Head-Box-S2-White.jpg?v=1777486129"},{"product_id":"pro-ject-amp-box-ds2-stereo-power-amplifier","title":"Pro-Ject Amp Box DS2 - Stereo Power Amplifier","description":"Amp Box DS2 \u003cbr\u003e\u003cbr\u003e\n\n•Audiophile class D power amplifier\u003cbr\u003e\n•Impressive signal spectrum and lower distortion\u003cbr\u003e\n•Elegant aluminium - metal sandwich casing\u003cbr\u003e\u003cbr\u003e\n \nThe Amp Box DS2 is built around a highly efficient, low-energy Class D amplifier module that delivers high output power, giving it the ability to drive even very demanding speakers. This simple yet effective stereo power amplifier is capable of delivering a very clean, pure sound performance with minimal electrical interferences.\u003cbr\u003e\u003cbr\u003e\n\nThe Amp Box DS2 meets Pro-Ject’s exacting standards for sonic ability, which results in a spacious soundstage that picks up on fine dynamic details and provides plenty of power to fill a typical listening room with sound. The design team took inspiration from tube amplifiers when designing all their amplifiers, resulting in a realistic, musical performance.  The sophisticated internal design of the Amp Box DS2 uses a four-layer PCB, which accounts for the noticeable upgrade in sound quality compared to the previous Amp Box DS.\u003cbr\u003e\u003cbr\u003e\n\nFor easy integration into a system, the Amp Box DS2 has four isolated speaker terminals on the back panel, and a Loop Output for passing the audio signal onto another device. The trigger link allows for the amplifier to be turned on when a connected Pre Box DS2 is switched on, making operation even easier. The Amp Box DS2 perfectly complements the DS2 pre-amplifier models, but its sound quality and efficiency also makes it viable for other types of systems.\u003cbr\u003e\u003cbr\u003e\n\nKey Features:-\u003cbr\u003e\n•Audiophile class D power amplifier\u003cbr\u003e\n•Impressive signal spectrum and lower distortion\u003cbr\u003e\n•High efficiency from mains to audio power\u003cbr\u003e\n•Low heat emission\u003cbr\u003e\n•Stereo level input (RCA)\u003cbr\u003e\n•Loop output (RCA)\u003cbr\u003e\n•Isolated speaker outputs\u003cbr\u003e\n•Trigger input \u0026amp; loop out\u003cbr\u003e\n•Elegant aluminium - metal sandwich casing\u003cbr\u003e\u003cbr\u003e\n\nTechnical Specifications:-v\nPower Output: 2x 100W (8Ω), 2x 140W (4Ω)\u003cbr\u003e \nChannel Separation: \u0026gt; 40dB at 20kHz \u003cbr\u003e\nFrequency Response: 10Hz - 50kHz (+0dB, -3dB) \u003cbr\u003e\nTHD: \u0026lt; 0.1% At 90W \u003cbr\u003e\nNoise Floor: \u0026gt; 90dB \u003cbr\u003e\nGain: 31dB \u003cbr\u003e\nInput: 1x RCA (Bypass Input-Output) \u003cbr\u003e\nInput Sensitivity: 550mV (100W, 4Ω)\u003cbr\u003e \nInput Impedance: 10KΩ \u003cbr\u003e\nSpeaker Connectors: 4mm Ø Banana Plugs, Spades Connectors or Naked Wire \u003cbr\u003e\nTrigger 12V DC: In \u0026amp; Out, 2-Pole Jack 2.5mm Ø \u003cbr\u003e\nExternal Power Supply: 48V \/ 2.5A DC\u003cbr\u003e \nDimensions: 240 x 72 x 194mm\u003cbr\u003e \nWeight:  1.86kg ","brand":"Pro-Ject","offers":[{"title":"Silver\/Walnut","offer_id":57409453654348,"sku":"PROJECTAMPBOXDS2-SW","price":395.83,"currency_code":"GBP","in_stock":true},{"title":"Black\/Eucalyptus","offer_id":57420915573068,"sku":"PROJECTAMPBOXDS2-BE","price":395.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Amp-Box-DS2-SW.jpg?v=1777486134"},{"product_id":"pro-ject-amp-box-ds2-mono","title":"Pro-Ject Amp Box DS2 Mono","description":"An ultra high-efficiency Bi-Phase PWM (Pulse Wave Modulation) circuit with SMD parts gives outstanding audio performance and stays cool on the outside. Sound quality is aimed to be as close as possible to Class A tube amplifiers with their liquid and lifelike presentation.  \n\nThe Amp Box DS Mono is compact-sized and therefore allows easy placement and can be switched on \u0026amp; off remotely via a trigger signal. A 45cm power-on cable is supplied for this purpose. For Bi- or Tri-amplification use, the remote power-on signal can be relayed to further units. \u003cbr\u003e\u003cbr\u003e \nFeatures:-\u003cbr\u003e\u003cbr\u003e\n• Improved PWM-circuitry (Pulse Wave Modulation) \u003cbr\u003e \n\n• Improved signal spectrum and lower distortion \u003cbr\u003e \n\n• 2 ohms drive capability \u003cbr\u003e \n\n• High efficiency from mains to audio power (92%)\u003cbr\u003e  \n\n• DC power supply (less than 1 watt standby power)\u003cbr\u003e  \n\n• SMD design for shortest signal path \u003cbr\u003e \n\n• Low heat emission\u003cbr\u003e  \n\n• Line level input and loop-out (RCA) \u003cbr\u003e \n\n• Gold-plated 5-way speaker binding posts\u003cbr\u003e  \n\n• Suitable for banana\/spade\/pin\/bare wire \u003cbr\u003e \n\n• Trigger input and loop out\u003cbr\u003e  \n\n• Metal casing protects against vibration and interference  \u003cbr\u003e\n\n• Available in black or silver \u003cbr\u003e\u003cbr\u003e \n\nSpecifications:-\u003cbr\u003e\u003cbr\u003e \n\nPower output 1 x 125W \/ 195W @ 8 ohms\/4 ohms\u003cbr\u003e  \n 2 ohms drive capability  \nFrequency response 10Hz - 50kHz (+ 0dB, - 3dB) \u003cbr\u003e \nSignal to noise ratio greater than -100dB (IEC -A)\u003cbr\u003e  \nTHD less than 0,1% @ 90W\u003cbr\u003e  \nGain 26dB \u003cbr\u003e \nPre-amp input 1x RCA with loop-out\u003cbr\u003e  \nInput sensitivity 1,5V \u003cbr\u003e \nInput impedance 100kohm \u003cbr\u003e \nSpeaker port 4mm Ø Banana, spade or bare wires\u003cbr\u003e  \nTrigger 12V DC In and Out, 2-pole jack Ø 2,5mm  \u003cbr\u003e\nExternal power supply 48V\/2,5A DC;100 - 240V, 50\/60Hz  \u003cbr\u003e\nStandby power consumption less than 1 watt  \u003cbr\u003e\nDimensons W x H x D 103 x 72 x 144 (163mm with sockets)  \u003cbr\u003e\nWeight 1290g without power supply  ","brand":"Pro-Ject","offers":[{"title":"Silver\/Walnut","offer_id":57409454506316,"sku":"PROJECTAMPBOXDS2MONO-SW","price":395.83,"currency_code":"GBP","in_stock":true},{"title":"Black\/Eucalyptus","offer_id":57420917244236,"sku":"PROJECTAMPBOXDS2MONO-BE","price":395.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Amp-Box-DS2-Mono-be.jpg?v=1777486138"},{"product_id":"pro-ject-pre-box-ds2-analogue","title":"Pro-Ject Pre Box DS2 Analogue","description":"DS2 Line\u003cbr\u003e\u003cbr\u003e\n\nThe Pre Box DS2 Analogue is a pure, single-ended Class A output pre-amplifier. Improving on its predecessor not just with the new DS2 aesthetic, internally it also now boasts a high-end circuit design.\u003cbr\u003e\u003cbr\u003e\n\nThe electrical layout of the Pre Box DS2 Analogue, in combination with a newly developed relay-controlled volume pot, ensures the amplifier has an extremely low noise floor. The inputs are also switched by high-quality relays and the use of couple-capacitor-free signal paths means the electrical signal leaves the amplifier as clean as possible.\u003cbr\u003e\u003cbr\u003e\n\nThe pure analogue technology employed in the Pre Box DS2 Analogue is rarely found on other pre-amplifiers in its price-range. The end-result is an unbelievably dynamic and relaxed musical sound that suits it to many more expensive systems, but in combination with the Amp Box DS2 or two Amp Box DS2 Mono‘s you will reach levels of audio performance that defy belief for the price.\u003cbr\u003e\u003cbr\u003e\n\nThe Pre Box DS2 Analogue is easy to control either by the front panel, or the supplied remote control. The 12V trigger output on the back panel allows for other compliant devices (such as the Amp Box DS2) to switch on and off when the Pre Box DS2 Analogue is controlled.\u003cbr\u003e\u003cbr\u003e\n\nKey Features:-\u003cbr\u003e\n•Premium stereo pre-amplifier\u003cbr\u003e\n•Five Analogue RCA inputs\u003cbr\u003e\n•Fixed line level output as well as variable output\u003cbr\u003e\n•Mono subwoofer RCA output\u003cbr\u003e\n•Trigger in\/out\u003cbr\u003e\n•RCA Line Level solid state output\u003cbr\u003e\n•Ultra linear circuit\u003cbr\u003e\n•Coupling-capacitor free signal path\u003cbr\u003e\n•Ultra low noise floor\u003cbr\u003e\n•Aluminium\/metal sandwich casing in silver or black available\u003cbr\u003e\n•IR remote control supplied\u003cbr\u003e\u003cbr\u003e\n\nTechnical Specifications:- \u003cbr\u003e\n\nAnalogue Inputs: 5x Line In (RCA Pair) \u003cbr\u003e\nAnalogue Outputs: 1x Fix Line Out (RCA Pair)\u003cbr\u003e\n1x Variable Line Out (RCA Pair)\u003cbr\u003e\n1x Sub Out (RCA) \u003cbr\u003e\nFrequency Response: 20Hz - 20kHz (+0.3dB) \u003cbr\u003e\nTHD: 0.00035% \u003cbr\u003e\nSignal to Noise Ratio: 113dB \u003cbr\u003e\nInput Impedance: 10kΩ\u003cbr\u003e \nTrigger: 12V DC \u003cbr\u003e\nTrigger In\/Output: 2-Pole 2.5mm Co-Axial Jack \u003cbr\u003e\nOutput Voltage: 1V (@ 1kHz) \u003cbr\u003e\nPower Consumption: \u0026lt; 1W Standby \/ 120mA DC\u003cbr\u003e \nOutboard Power Supply 18V\/1000mA DC \u003cbr\u003e\nDimensions: 240 x 72 x 200mm \u003cbr\u003e\nWeight (Without PSU): 1.78kg ","brand":"Pro-Ject","offers":[{"title":"Silver\/Walnut","offer_id":57409454932300,"sku":"PROJECTPREBOXDS2ANAL-SW","price":320.83,"currency_code":"GBP","in_stock":true},{"title":"Black\/Eucalyptus","offer_id":57420920619340,"sku":"PROJECTPREBOXDS2ANAL-BE","price":320.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Pre-Box-DS2-Ana-SW.jpg?v=1777486143"},{"product_id":"pro-ject-amp-box-rs","title":"Pro-Ject Amp Box RS","description":"Four specific characteristics make this a true high-end amplifier:\u003cbr\u003e \u003cbr\u003e \n\n1. Fully balanced double mono design \u003cbr\u003e \n\n2. Highly efficient energy saving PWM modules \u003cbr\u003e \n\n3. Tube buffer input stage  \u003cbr\u003e\n\n4. Upgrade option PS Box RS for more power and further improved sound quality . \u003cbr\u003e \n\n \n\nAmp Box RS offers 3-dimensional sound-staging, perfect micro dynamics and ultimate resolution combined with high power output and 2 ohm capability and also is the perfect solution for Bi– or Tri-Amping applications.  \n\nAmp Box RS is the perfect companion for Pre Box RS and will give pure sound experience, that the real audiophile is looking for.  \n\nBecause of its heat emission Amp Box RS luxury casing, which is available in silver or black finish, should not be combined with Design Box Acryl. \u003cbr\u003e \n\n\n• Fully balanced double mono design (Pulse Wave Modulation) \u003cbr\u003e \n\n• Highly efficient conversion from mains to output power (92%)  \u003cbr\u003e\n\n• 2 ohms drive capability  \u003cbr\u003e\n\n• Tube buffer stage with reference quality \u003cbr\u003e \n\n• SMD construction for shortest signal paths\u003cbr\u003e  \n\n• Line level preamp inputs (RCA and XLR)\u003cbr\u003e  \n\n• Top-quality speaker terminals \u003cbr\u003e \n\n• Metal casing protects against vibration and interference \u003cbr\u003e \n\n• DC power supply (less than 1 watt standby power)\u003cbr\u003e  \n\n• Available in silver or black\u003cbr\u003e  \n\n• Optional Upgrade: Linear power supply PS Box RS  \n\n  for higher power otput and further improved sound quality \u003cbr\u003e\u003cbr\u003e \n\nSpecifications:- \u003cbr\u003e\u003cbr\u003e\nTube assembly 2 x ECC88 (6922)\u003cbr\u003e  \nPower output 2 x 110W \/ 180W @ 8 ohms \/ 4 ohms \u003cbr\u003e \n (2x 180\/250 W @ 8\/4 ohms with PS Box RS)  \n 2 ohms drive capability\u003cbr\u003e  \nFrequency response 10Hz - 50kHz (+ 0dB, - 3dB)\u003cbr\u003e  \nSignal to noise ratio greater than -100dB (IEC -A)\u003cbr\u003e  \nTHD less than  0,05% @ 100W\u003cbr\u003e  \nInput RCA and XLR-sockets \u003cbr\u003e \nInput sensitivity 1,35V \u003cbr\u003e \nInput Impedance 22kohms \u003cbr\u003e \nSpeaker terminals 4mm Ø Banana, spade or bare wire  \u003cbr\u003e\nExternal power supply 48V\/2,5A DC;100 - 240V, 50\/60Hz \u003cbr\u003e \nStandby consumption less than  1watt \u003cbr\u003e \nDimensions W x H x D 206 x 72 x 200 (220mm with sockets)\u003cbr\u003e  \nWeight 2120g without power supply  ","brand":"Pro-Ject","offers":[{"title":"Silver","offer_id":57409455194444,"sku":"PROJECTAMPBOXRSS","price":665.83,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":57420924256588,"sku":"PROJECTAMPBOXRSB","price":665.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Project-Amp-Box-RS-Silver2.jpg?v=1777486152"},{"product_id":"pro-ject-amp-box-rs-mono","title":"Pro-Ject Amp Box RS Mono","description":"Four specific characteristics make this a true high-end amplifier:  \u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n1. Fully balanced mono design  \n\n2. Highly efficient energy saving PWM modules \u003cbr\u003e \n\n3. Tube buffer input stage  \u003cbr\u003e\n\n4. Upgrade option Power Box RS Amp for more power and further improved sound quality.\u003cbr\u003e\u003cbr\u003e  \n\n \n\nAmp Box RS Mono offers 3-dimensional sound-staging, perfect micro dynamics and ultimate resolution combined with high power output and 2 ohm capability and is the perfect solution for Bi– or Tri-Amping applications. Amp Box RS Mono is the perfect companion for Pre Box RS and will give pure sound experience, that the real audiophile is looking for.\u003cbr\u003e\u003cbr\u003e  \n\nBecause of its heat emission Amp Box RS Mono luxury casing, which is available in silver or black, should not be combined with Design Box Acryl.\u003cbr\u003e\u003cbr\u003e  \n\n\n• Fully balanced design (Pulse Wave Modulation)  \u003cbr\u003e\n\n• Highly efficient conversion from mains to output power (92%) \u003cbr\u003e \n\n• 2 ohms drive capability\u003cbr\u003e  \n\n• Tube buffer stage with reference quality\u003cbr\u003e  \n\n• SMD construction for shortest signal paths\u003cbr\u003e  \n\n• Line level preamp inputs (RCA and XLR)\u003cbr\u003e  \n\n• Top-quality speaker terminal \u003cbr\u003e \n\n• Metal casing protects against vibration and interference\u003cbr\u003e  \n\n• DC power supply (less than 1 watt standby power) \u003cbr\u003e \n\n• Available in silver or black  \u003cbr\u003e\n\n• Optional Upgrade: Linear power supply Power Box RS Amp  \n\n    for higher power output and further improved sound quality \u003cbr\u003e \n\nSpecifications:- \u003cbr\u003e\n\nTube assembly 1 x ECC88 (6922)\u003cbr\u003e  \nPower output 1 x 125W \/ 195W @ 8 ohms \/ 4 ohms  \n 2 ohms drive capability  \u003cbr\u003e\nFrequency response 10Hz - 50kHz (+ 0dB, - 3dB)\u003cbr\u003e  \nSignal to noise ratio greater than -100dB (IEC -A) \u003cbr\u003e \nTHD less than 0,05% @ 100W\u003cbr\u003e  \nInput RCA and XLR-socket \u003cbr\u003e \nInput sensitivity 1,35V \u003cbr\u003e \nInput Impedance 22kohms \u003cbr\u003e \nSpeaker terminal 4mm Ø Banana, spade or bare wire \u003cbr\u003e \nExternal power supply 48V\/2,5A DC;100 - 240V, 50\/60Hz \u003cbr\u003e \nStandby consumption less than 1watt\u003cbr\u003e  \nDimensions W x H x D 206 x 72 x 200 (220mm with sockets) \u003cbr\u003e \nWeight 2020g without power supply  \n\n\n","brand":"Pro-Ject","offers":[{"title":"Black","offer_id":57409455259980,"sku":"PROJECTAMPBOXRSMONOB","price":582.5,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":57420924682572,"sku":"PROJECTAMPBOXRSMONOS","price":582.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Project-Amp-Box-RS-Mono.jpg?v=1777486156"},{"product_id":"pro-ject-pre-box-rs","title":"Pro-Ject Pre Box RS","description":"Four specific characteristics make this a true high-end preamplifier: 1. Fully balanced double mono design 2.class-A circuitry with no negative feedback 3. Tube output stage 4. Separate power supply as an upgrade option for further improved sound quality. \u003cbr\u003e \u003cbr\u003e\n\nPre Box RS offers 3-dimensional sound-staging, perfect micro dynamics and ultimate resolution combined with flexibility to use XLR and RCA sources. Perfectly combined with Pro-Ject Amp Box RS amplifiers, Pre Box RS will give pure sound experience, that the real audiophile is looking for. Pre Box RS utilises a luxury casing, that is available in silver or black finish. \u003cbr\u003e\u003cbr\u003e \n\n \n\n\n• Fully balanced double mono design  \u003cbr\u003e\n\n• Ultra-linear and ultra low noise \u003cbr\u003e \n\n• Pure Class A circuitry \u003cbr\u003e \n\n• Input switching via relais\u003cbr\u003e  \n\n• Low ESR capacitors\u003cbr\u003e  \n\n• Blue Alps volume control  \u003cbr\u003e\n\n• 3 XLR \u0026amp; 3 RCA inputs \u003cbr\u003e \n\n• 1 Pre–out XLR \u0026amp; 1 Record-out RCA  \u003cbr\u003e\n\n• DC power supply (less than 1 watt standby power)\u003cbr\u003e  \n\n• IR remote control included  \u003cbr\u003e\n\n• Metal casing protects against vibration and interference  \u003cbr\u003e\n\n• Available in black and silver \u003cbr\u003e \n\n\nTube assenbly 2x ECC88 (6922 )\u003cbr\u003e  \nFrequency response 20Hz - 50kHz (+ 0\/- 0,08 dB)\u003cbr\u003e  \nSignal to noise ratio -95dB (IEC -A) \u003cbr\u003e \nTHD 0,06% \u003cbr\u003e \nLine-level inputs 3 pairs XLR \u0026amp; 3 pairs RCA\/phono sockets\u003cbr\u003e  \nInput impedance 150kohms\u003cbr\u003e  \nGain 18dB (XLR)\u003cbr\u003e  \nOutputs 1 Pre-Out (XLR), 1x Rec-Out (RCA)  \u003cbr\u003e\nOutboard power supply 18V\/1A DC  \n suitable for your country's mains supply  \u003cbr\u003e\nPower consumption typical 700mA \/ less than 1 watt standby \u003cbr\u003e \nDimensions W x H x D 206 x 72 x 200mm (210 with sockets) \u003cbr\u003e \nWeight 1950g without power supply  \n\n\n","brand":"Pro-Ject","offers":[{"title":"Silver","offer_id":57409455292748,"sku":"PROJECTPREBOXRSS","price":665.83,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":57420925436236,"sku":"PROJECTPREBOXRSB","price":665.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Pre-Box-RS.jpg?v=1777486160"},{"product_id":"pro-ject-head-box-rs-headphone-amplifier","title":"Pro-Ject Head Box RS - Headphone Amplifier","description":"Head Box RS is a reference quality headphone amplifier with fully balanced tube input stage (double triode tube 6922) and single ended, class A „FET (Field Effect Transistor)“ output stage. It offers balanced and unbalanced input as well as balanced and un-balanced by-pass connectors for using the pass-through input signal with other components.  \u003cbr\u003e\u003cbr\u003e\n\nVolume control consists of a precise volume regulator with matched resistance between left and right channel. \u003cbr\u003e\u003cbr\u003e \n\nA special output impedance selector allows to adjust output impedance in three steps 5, 20 and 50 ohms to achieve better im-pedance matching between amplifier and headphones. Some experiments with different positions of output impedance selector are highly recommended to get the ultimate sound experience for your headphone. \u003cbr\u003e\u003cbr\u003e \n\nAn advanced multi-stage power supply with four different output voltages is used to achieve the best possible S\/N ratio for out-standing reproduction of detail, dynamics and imaging with any dynamic headphone. \u003cbr\u003e\u003cbr\u003e  \n\nFeatures:-\u003cbr\u003e\n\n• Fully balanced double mono design \u003cbr\u003e \n\n• Tube input stage  \u003cbr\u003e\n\n• Class-A FET output stage \u003cbr\u003e \n\n• Switchable output impedance for ultimate performance \u003cbr\u003e \n\n• Superior low distortion \u003cbr\u003e \n\n• Low noise components for ultimate dynamic \u0026amp; detail \u003cbr\u003e \n\n• Output: 6,3mm socket \u003cbr\u003e \n\n• Full metal casing in silver or black\u003cbr\u003e  \n\n• Optional Upgrade: Linear power supply Power Box RS Uni 1 (or 4) for further improved sound quality \u003cbr\u003e\u003cbr\u003e \n\nSpecifications:-\u003cbr\u003e\n\nLine-level input\/output 1 pair RCA\/phono and 1 pair XLR each \u003cbr\u003e \nHeadphone jack 3-pole 1\/4 ‘‘ (6,3mm Ø) \u003cbr\u003e \nPower output 350mW \/ 32 ohms, 60 mW \/ 300 ohms\u003cbr\u003e  \nCrosstalk -58dB\u003cbr\u003e  \nSignal-to-noise -99dB\u003cbr\u003e  \nFrequency response 30Hz – 20kHz\/(+0,2dB; -0,05dB) \u003cbr\u003e \nTHD (IMD) 0,17% (XLR in, output impedance setting 5 ohms, load 32 ohms)\u003cbr\u003e  \nGain 9dB \u003cbr\u003e \nOutboard power supply 20V\/3A DC suitable for your country's mains supply \u003cbr\u003e \nPower consumption 1,3A DC \u003cbr\u003e \nDimensions W x H x D 206 x 72 x 200 (209) mm (D with sockets)\u003cbr\u003e  \nWeight 2150g (without power supply)  \n","brand":"Pro-Ject","offers":[{"title":"Silver","offer_id":57409455325516,"sku":"PROJECTHEADBOXRSS","price":582.5,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":57420925927756,"sku":"PROJECTHEADBOXRSB","price":582.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Head-Box-RS-Silver.jpg?v=1777486165"},{"product_id":"pro-ject-stereo-box-rs-integrated-amplifier","title":"Pro-Ject Stereo Box RS - Integrated Amplifier","description":"Features:-\u003cbr\u003e\n\n• 2x 120 watts @ 4 ohms \u003cbr\u003e \n\n• 2 ohms drive capability \u003cbr\u003e \n\n• Pure analogue audio circuitry \u003cbr\u003e \n\n• Dual mono \u0026amp; fully balanced design principle \u003cbr\u003e \n\n• 6 stereo line inputs (XLR and RCA)\u003cbr\u003e  \n\n• Pre and subwoofer plus fixed level record out\u003cbr\u003e  \n\n• Tube buffer input stage (6922)\u003cbr\u003e  \n\n• Motor drive potentiometer\u003cbr\u003e  \n\n• IR remote included \u003cbr\u003e \n\n• High class metal casing\u003cbr\u003e  \n\n• DC power supply (less than 1 watt standby power)\u003cbr\u003e  \n\n• Available in silver or black \u003cbr\u003e\u003cbr\u003e \n\nSpecifications:-\u003cbr\u003e \n\nPower output 2x 80W \/ 120W at 8 \/ 4 ohms \u003cbr\u003e \nSignal-to-noise ratio more than -95dB (IEC -D)\u003cbr\u003e  \nFrequency response 20Hz - 20kHz (+0dB, -0,08dB) \u003cbr\u003e \nTHD 0,05% \/ 100 watts \u003cbr\u003e \nGain 32dB (RCA) \/ 35dB (XLR) \u003cbr\u003e \nStereo line inputs 5 pair RCA\/Cinch sockets and 1 pair XLR\u003cbr\u003e  \nOutput impedance 0,022 ohms\u003cbr\u003e  \nSubwoofer output 1x RCA (mono)\u003cbr\u003e  \nRecord output Stereo RCA (fixed level)\u003cbr\u003e  \nSpeaker connectors 4mm Ø banana plugs, spades connectors or  \n naked wire  \u003cbr\u003e\nPower supply 48V\/2,5A DC;100 - 240V, 50\/60Hz \u003cbr\u003e \nStandby Power consumption less than 1 watt\u003cbr\u003e  \nDimensions W x H x D 206 x 72 x 200 (220mm with sockets)\u003cbr\u003e  \nWeight 2650g without power supply \n","brand":"Pro-Ject","offers":[{"title":"Black","offer_id":57409455423820,"sku":"PROJECTSTERBOXRSB","price":749.17,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":57420926746956,"sku":"PROJECTSTERBOXRSS","price":749.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Stereo-Box-RS-Black.jpg?v=1777486169"},{"product_id":"pro-ject-cd-box-rs","title":"Pro-Ject CD Box RS","description":"Features:- \u003cbr\u003e\n\n• Toploading CD drive with aluminium cover plate\u003cbr\u003e  \n\n• Magnetic clamp \u003cbr\u003e  \n\n• Plays CD Audio, CD-R, CD-RW, Hybrid SACD \u003cbr\u003e  \n\n• Plays formats: .wav, .flac (up to 24\/96), .wma, .mp3  \u003cbr\u003e \n\n• Blue Tiger 100 Servosystem  \u003cbr\u003e \n\n• Sonic Scrambling technology via I²S interface  \u003cbr\u003e \n\n• I²S interface with RJ45 connection and BNC clock input for ultra low jitter  \u003cbr\u003e \n\n• Full colour LCD screen displays time, tracks, text (if available) \u003cbr\u003e  \n\n• Gravity design with central mass point \u003cbr\u003e  \n\n• IR remote included \u003cbr\u003e  \n\n• Available in silver or black finish \u003cbr\u003e \u003cbr\u003e  \n\nSpecifications:- \u003cbr\u003e \n\nSupports CD, CD-R, CD-RW and Hybrid-SACD  \u003cbr\u003e \nDigital outputs 1x I²S via RJ45 (for use with DAC Box RS or Pre Box RS Digital) \u003cbr\u003e  \n 1x AES\/EBU (XLR) \u003cbr\u003e  \n 1x co-axial (S\/PDIF)\u003cbr\u003e   \n 1x optical Toslink  \u003cbr\u003e \nExternal clock interface BNC (for use with DAC Box RS or Pre Box RS Digital)  \u003cbr\u003e \nOutboard power supply 20V\/3000mA DC; 100 - 240V, 50\/60Hz  \u003cbr\u003e \nStandby power consumption less than 1 watt \u003cbr\u003e  \nPower consumption 600mA max.\/ 90mA idle  \u003cbr\u003e \nDimension H x W x D 72 x 206 x 200 (240) mm (D with sockets) \u003cbr\u003e  \nWeight 3200g without power supply  ","brand":"Pro-Ject","offers":[{"title":"Silver","offer_id":57409455653196,"sku":"PROJECTCDBOXRSS","price":749.17,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":57420928090444,"sku":"PROJECTCDBOXRSB","price":749.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-CD-Box-RS-Silver.jpg?v=1777486174"},{"product_id":"pro-ject-stream-box-rs","title":"Pro-Ject Stream Box RS","description":"Features:- \u003cbr\u003e\n\nSame features as AWARD WINNING audiophile grade highend  \n\n  audio streaming client Stream Box DS net:\u003cbr\u003e\u003cbr\u003e\n\n+ NEW XLR output \u003cbr\u003e \n\n+ NEW Volume control via analogue Alps potentiometer \u003cbr\u003e \n\n+ NEW Fully balanced double mono triode tube Output  \n\n     stage (ECC 6922) \u003cbr\u003e \n\n+ NEW 1x digital coax input  \u003cbr\u003e\n\n+ NEW 1x digital optic input  \u003cbr\u003e\n\n+ NEW Top of the notch highend PCM 1792A DAC \u003cbr\u003e \n\n+ NEW ALAC and AIFF support\u003cbr\u003e  \n\n+ NEW Fast forward and return Search \u003cbr\u003e \n\n+ NEW Alphanumeric Search  \u003cbr\u003e\n\n+ NEW 9 display languages \u003cbr\u003e \n\n+ NEW Wifi 802\/b\/g\/n allows true 24\/192 over Wifi \u003cbr\u003e \n\n+ NEW Superlative rigid luxury alu cabinet \u003cbr\u003e\u003cbr\u003e \n\n\nSpecifications:- \u003cbr\u003e\n\nTUBE OUTPUT STAGE E88CC (6922) for balanced and unbalanced out \u003cbr\u003e \nAUDIO FORMATS MP3, FLAC (up to 24bit\/192kHz including 24\/176),  \n WMA9-lossless, AIFF, AAC, ALAC, LPCM (WAV, up to 24bit\/192kHz), Ogg Vorbis 1.0 \u003cbr\u003e \nINTERNETRADIO vTuner included  \u003cbr\u003e\nGAPLESS all audio formats (using IR control)\u003cbr\u003e  \nINPUTS Network, 1x digital coax, 1x digitaloptic,  \n 2x USB 2.0 (24\/96, Type A), supports  \n Flash- and Harddisc drives (FAT16 and FAT32) \u003cbr\u003e \nOUTPUT LEVEL up to 8V RCA or 16V XLR (analog sources)  \n up to 2V RCA or 4V XLR (digital sources) \u003cbr\u003e \nOUTPUT XLR, RCA (analogue) Coax S\/PDIF (digital) \u003cbr\u003e \nS\/N RATIO 115dB @ 2V \u003cbr\u003e \nNETWORK Wi-Fi IEEE 802.11 b\/g\/n and Ethernet (10\/100 BaseT)\u003cbr\u003e  \nEXTERNAL CONTROL Free Box Control APP available for iOS + Android\u003cbr\u003e  \nPOWER SUPPLY 20VDC\/1A\u003cbr\u003e  \nPOWER CONSUMPTION 17W max HD-drive connected\/ 0,3W Standby \u003cbr\u003e \nFACEPLATE black or silver\u003cbr\u003e  \nDIMENSIONS 72 x 206 x 200 (240) mm (HxWxD) without antenna\u003cbr\u003e  \nWEIGHT 3,25 kg  \n","brand":"Pro-Ject","offers":[{"title":"Silver","offer_id":57409455751500,"sku":"PROJECTSTREAMBOXRSS","price":1041.67,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":57420928844108,"sku":"PROJECTSTREAMBOXRSB","price":1041.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Stream-Box-RS-Silver.jpg?v=1777486178"},{"product_id":"pro-ject-dac-box-rs","title":"Pro-Ject DAC Box RS","description":"Features:- \u003cbr\u003e\n\n• Double top grade PCM-1792 D\/A chip from Texas Instruments\u003cbr\u003e  \n\n• 9 Inputs: USB, AES-EBU, optical (Toslink), coax (S\/PDIF) \u003cbr\u003e \n\n• 24bit\/192kHz asynchronous USB (XMOS technology) \u003cbr\u003e \n\n• DSD (up to DSD128) capability (DSD over PCM) \u003cbr\u003e \n\n• I²S interface for CD Box RS (sonic2data transfer technology) with additional clock synchronisation port (BNC)\u003cbr\u003e  \n\n• 2 selectable digital filter settings \u003cbr\u003e \n\n• Fully balanced analogue audio circuitry \u003cbr\u003e \n\n• Tube output stage and solid-state output stage (switchable) \u003cbr\u003e \n\n• Ultra linear and ultra low noise circuitry\u003cbr\u003e  \n\n• IR remote control included \u003cbr\u003e \n\n• XLR and RCA line level output sockets \u003cbr\u003e \n\n• DC power supply (less than 1 watt standby power)\u003cbr\u003e  \n\n• Full metal casing in silver or black\u003cbr\u003e\u003cbr\u003e\n\nSpecifications:- \u003cbr\u003e\n\n\n\nD\/A-converter Double Texas Instruments PCM-1792  \n 8 x Oversampling design \u003cbr\u003e \nSampling rates 32\/44,1\/48\/88,2\/96\/176,2\/192 kHz,  \n (optical up to 96kHz)\u003cbr\u003e  \nSelectable filter settings „steep“ and „optimum phase“\u003cbr\u003e  \n9 digital inputs 2x coax (S\/PDIF), 2x optical (Toslink®),  \n USB B, 1x AES\/EBU, 1x I²S\u003cbr\u003e  \nPrecision clock output BNC (use with CD Box RS)\u003cbr\u003e  \nFrequency response 20Hz - 50kHz (+0\/-1dB)\u003cbr\u003e  \nOutput stages 6922 tube and solid state (switchable)\u003cbr\u003e  \nAnalogue out RCA\/Cinch and XLR \u003cbr\u003e \nOutput voltage max 4\/2 Veff (XLR\/RCA)\u003cbr\u003e  \nTHD 0,005% solid state out  \n 0,25% tube out \u003cbr\u003e \nSignal to noise ratio 100dB\u003cbr\u003e  \nPower consumption less than 1 watt standby, 800\/300mA max (tube\/solid)\u003cbr\u003e  \nOutboard Power supply 20V\/3A DC (included)\u003cbr\u003e  \nDimensions W x H x D 206 x 72 x 200 (220mm with sockets)\u003cbr\u003e  \nWeight 1010g without power supply ","brand":"Pro-Ject","offers":[{"title":"Silver","offer_id":57409456144716,"sku":"PROJECTDACBOXRSS","price":665.83,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":57420933202252,"sku":"PROJECTDACBOXRSB","price":665.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-DAC-Box-RS-Silver.jpg?v=1777486182"},{"product_id":"pro-ject-pre-box-rs-digital","title":"Pro-Ject Pre Box RS Digital","description":"Features:- \u003cbr\u003e\n\n• Switchable DAC chips: 2x PCM1792 or PCM5102 \u003cbr\u003e \n\n• 9 digital inputs: i²S, AES\/EBU, Toslink, S\/PDIF coax \u003cbr\u003e \n\n• Analogue: Pre-out XLR\/RCA\/headphone, RCA input \u003cbr\u003e \n\n• Headphone amp with adaptable output impedance \u003cbr\u003e \n\n• Fully balanced double mono design \u003cbr\u003e \n\n• Output stage switchable between 6922 tube \u0026amp; solid state \u003cbr\u003e \n\n• Ultra-linear and ultra low noise \u003cbr\u003e \n\n• Pure Class A circuitry \u003cbr\u003e \n\n• Blue Alps volume control \u003cbr\u003e \n\n• DC power supply (less than 1 watt standby power)\u003cbr\u003e  \n\n• IR remote control included \u003cbr\u003e \n\n• Available in black and silver\u003cbr\u003e\u003cbr\u003e  \n\nSpecifications:-\u003cbr\u003e \n\nDAC DAC1 – 2 x PCM1792 24\/192  \n DAC2 – PCM5102 32\/384 \u003cbr\u003e \nTubes 6922 EH \u003cbr\u003e \nDigital inputs 1 x USB 2.0 Audio 32\/384 + DoP-DSD 64\/128 \u003cbr\u003e \n 1 x RJ45 Sonic I2S for CD Box RS in Sonic Mode \u003cbr\u003e \n 2 x S\/PDIF 24\/192, 4 x S\/PDIF Optical 24\/96 \u003cbr\u003e \n 1x AES\/EBU balanced 24\/192\u003cbr\u003e  \nLine-level input 1 RCA\/phono sockets \u003cbr\u003e \nInput impedance 33kohms \u003cbr\u003e \nAnalog outputs Pre-out (XLR \u0026amp; RCA), Headphone (6,35mm jack) \u003cbr\u003e \nHeadphone impedance 5 \/ 20 \/ 50 ohms switchable \u003cbr\u003e \nAnalog input sensitivity 1,6V RMS for full headphone output\u003cbr\u003e  \nFrequency response 20Hz - 50kHz (+ 0\/- 0,1 dB)\u003cbr\u003e  \nSignal to noise ratio -100dB (IEC-A)\u003cbr\u003e  \nTHD 0,005% solid state output\/ 0,25% tube output  \u003cbr\u003e\nMaster clock output 16,9344MHz for CD Box RS in Sonic Mode \u003cbr\u003e \nOutboard power supply 20V\/3A DC  \n suitable for your country's mains supply \u003cbr\u003e \nPower consumption 300mA solid \/ 850mA tube \/ 90mA standby \u003cbr\u003e \nDimensions W x H x D 206 x 72 x 200mm (210 with sockets)\u003cbr\u003e  \nWeight 1950g without power supply \n","brand":"Pro-Ject","offers":[{"title":"Silver","offer_id":57409456341324,"sku":"PROJECTPREBOXRSDIGS","price":832.5,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":57420934316364,"sku":"PROJECTPREBOXRSDIGB","price":832.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Pre-Box-RS-Digital-Silver.jpg?v=1777486187"},{"product_id":"pro-ject-power-box-rs-phono","title":"Pro-Ject Power Box RS Phono","description":"When Power Box RS Phono is connected to Phono Box RS and switched ON, only the accus are connected (adapter and charger are physically disconnected) so Phono Box RS is completely isolated from mains interferences. When accu voltage decreases and reaches certain limits, further playback will be a danger for status of the battery, the charger is automatically connected. This status is indicated by LED on the front panel. Everything continues without any limitation and playback is possible, but the advantage of completely isolating for the charging period is lost. Even if the biggest advantage is temporarily not available, the battery now works as very big filtration bank and the sound is still far better than in case of using the standard power adapter. When accu is fully charged, the charger is disconnected and again Power Box RS Phono powers Phono Box RS only from accu packs. \u003cbr\u003e \u003cbr\u003e \n\n\nFeatures:- \u003cbr\u003e\n\n• Purest and cleanest power for Phono Box RS \u003cbr\u003e \n\n• Fully isolates Phono Box RS from mains interference and  \n\n noise while playback \u003cbr\u003e \n\n• Advanced Lithium Polymer battery (one for each channel) \u003cbr\u003e \n\n• Playback time approximately 4 hours\u003cbr\u003e  \n\n• Charging time approximately 4 hours \u003cbr\u003e \n\n• Optimised battery life due to intelligent micro-processor \u003cbr\u003e \n\n controlled charging electronics \u003cbr\u003e \n\n• Status indicator LEDs on front \u003cbr\u003e \n\n• Available in silver or black \u003cbr\u003e\u003cbr\u003e \n\nSpecifications:-\u003cbr\u003e \n\n\nOutput voltage from +\/-14,8V to +\/-16,8V,  \n depends on battery charge level \u003cbr\u003e \nBattery type and capacity 15 volts Li-ion, 2000mAh (2 pcs.) \u003cbr\u003e \nCharging time approx. 4 hours  \n (longer when Phono Box RS in use) \u003cbr\u003e \nBattery playing time approx. 4 hours \u003cbr\u003e \nOutboard power supply 20V\/3000mA DC  \n suitable for your country's mains supply \u003cbr\u003e \nDimensions W x H x D 201 x 72 x 195mm  \u003cbr\u003e\nWeight 2030g without power supply  \n","brand":"Pro-Ject","offers":[{"title":"Silver","offer_id":57409456374092,"sku":"PROJECTPOWBOXRSPHONOS","price":375.0,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":57420934742348,"sku":"PROJECTPOWBOXRSPHONOB","price":375.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Power-Box-RS-Phono-Silver.jpg?v=1777486191"},{"product_id":"pro-ject-power-box-rs-amp","title":"Pro-Ject Power Box RS Amp","description":"Linear power supply consists of a big toroidal transformer with shielding between primary and secondary winding which acts as an isolation transformer and avoids penetration of interferences from mains into amplifier. This transformer has a big power reserve, compared to a standard power adaptor. It has very low output impedance and in combination with large filtration capability it can easily manage required power of one stereo amplifier or two mono amplifiers. Advice: To avoid magnetic interference do not stack amplifier and Power Box RS Amp!  \u003cbr\u003e\u003cbr\u003e\n\nAs every amplifier, also digital ones, are sensitive for good quality of energy they are powered with. It is proven by extensive listening tests, that linear power supplies improve the sound of digital amplifiers significantly. This is what all well known high-end manufacturers already realised. Therefore Power Box RS Amp offers a big sound upgrade at an affordable price.\u003cbr\u003e\u003cbr\u003e  \n\nFeatures:-\u003cbr\u003e \n\n• Suitable for Pro-Ject Audio Systems power amplifiers \u003cbr\u003e \n\n• Replaces original “switching” power supplies\u003cbr\u003e  \n\n• Almost double amplifier power output combined with Amp Box RS, Amp Box DS and Stereo Box RS (2x 200\/120 watts 4\/8 ohms)\u003cbr\u003e  \n\n• Significant sound improvement with better dynamic and bass response, improved soundstage\u003cbr\u003e \n\n• Compatible with Amp Box RS, Amp Box RS Mono, Stereo Box RS but also with Amp Box DS or Amp Box DS Mono\u003cbr\u003e  \n\n• Big toroidal transformer with copper shielding \u003cbr\u003e \n\n• Very low output impedance \u003cbr\u003e \n\n• Filtration capability 40.000 uF capacitors low ESR types \u003cbr\u003e \n\n• Available in silver or black \u003cbr\u003e\u003cbr\u003e \n\nSpecifications:- \u003cbr\u003e\n\nInput voltage AC 230V\/50Hz IEC C15 connector  \n (120V\/60Hz US version)\u003cbr\u003e  \nOutput voltage two outputs by 2 x 48V \/ 2.5A DC each \u003cbr\u003e \nFiltration capacity 40.000 microFarads\u003cbr\u003e  \nOutput voltage ripple 7mV  \u003cbr\u003e\nPower consumption 600 watts max \u003cbr\u003e \nDimensions W x H x D 206 x 72 x 200 (220)mm (incl. sockets) \u003cbr\u003e \nWeight 4,8 kg  \n","brand":"Pro-Ject","offers":[{"title":"Black","offer_id":57409456406860,"sku":"PROJECTPOWERVOXRSAMPB","price":375.0,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":57420936642892,"sku":"PROJECTPOWERBOXRSAMPS","price":375.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Power-Box-RS-Amp-Black.jpg?v=1777486196"},{"product_id":"pro-ject-power-box-rs-uni-1-way","title":"Pro-Ject Power Box RS UNI 1-Way","description":"It is a proven fact that a power supply is a very important part of the audio path and significantly contributes to the sonic quality of an audio product. In order to offer the possibility of improving sound quality, we designed the linear power supplies Power Box RS Uni 1-way and 4-way for our reference standard (RS) line. It significantly enhances the sound quality of following components: CD Box RS, DAC Box RS, Head Box RS, Pre Box RS, Pre Box RS Digital and Stream Box RS. Power Box RS Uni 1-way is for one of these components and Power Box RS Uni 4-way for four of these components. \u003cbr\u003e \u003cbr\u003e \n\nA linear power supply consists of a massive toroidal transformer with shielding between primary and secondary winding, which acts as an isolating transformer and avoids penetration of interferences from mains into the audio component. The built-in transformer has a much higher power reserve compared to the standard power adapter. It has very low output impedance and in combination with large filtration capability it can easily manage all power needs. Sound staging, darkness of silent backgrounds and small detail resolution will improve strongly and contribute to a far better overall performance of each component.  \u003cbr\u003e \u003cbr\u003e \n\nStandard connection cable (3-pol) is included in delivery. Special highend super shielded connection cable in specified lengths 20cm, 40cm, 80cm and 1m available on request.\u003cbr\u003e \u003cbr\u003e \n  \nFeatures:- \u003cbr\u003e \n\n• Purest and cleanest power using non-switching power supply \u003cbr\u003e  \n\n• Soft start system avoids current inrush in primary winding \u003cbr\u003e  \n\n• Audio type toroidal transformer \u003cbr\u003e  \n\n• Main isolating transformer with copper foil shielding \u003cbr\u003e  \n\n• Secondary voltage rectification with precise regulation \u003cbr\u003e  \n\n• High filtration capacity (10.000 µF)\u003cbr\u003e   \n\n• Low ESR capacitors \u003cbr\u003e  \n\n• Low noise components with surge protection\u003cbr\u003e   \n\n• Available in silver or black \u003cbr\u003e \u003cbr\u003e  \n\nSpecifications:- \u003cbr\u003e \n\nInput voltage AC 230V\/50Hz IEC C15 connector  \n (120V\/60Hz US)\u003cbr\u003e   \nOutput voltage \/ current 20V \/ 3A max\u003cbr\u003e   \nFiltration capacity 10.000 µF \u003cbr\u003e  \nOutput voltage ripple rejection better than 75dB \u003cbr\u003e  \nDimensions W x H x D 201 x 72 x 195mm \u003cbr\u003e  \nWeight 4.800g  ","brand":"Pro-Ject","offers":[{"title":"Silver","offer_id":57409456505164,"sku":"PROJECTPOWBOXRSUNI1WAYS","price":299.17,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":57420936675660,"sku":"PROJECTPOWERBOXRSUNI1WAYB","price":299.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Power-Box-RS-Uni-1-way-silver.jpg?v=1777486200"},{"product_id":"pro-ject-power-box-rs-uni-4-way","title":"Pro-Ject Power Box RS UNI 4-Way","description":"It is a proven fact that a power supply is a very important part of the audio path and significantly contributes to the sonic quality of an audio product. In order to offer the possibility of improving sound quality, we designed the linear power supplies Power Box RS Uni 1-way and 4-way for our reference standard (RS) line. It significantly enhances the sound quality of following components: CD Box RS, DAC Box RS, Head Box RS, Pre Box RS, Pre Box RS Digital and Stream Box RS. Power Box RS Uni 1-way is for one of these components and Power Box RS Uni 4-way for four of these components.  \u003cbr\u003e\u003cbr\u003e\n\nA linear power supply consists of a massive toroidal transformer with shielding between primary and secondary winding, which acts as an isolating transformer and avoids penetration of interferences from mains into the audio component. The built-in transformer has a much higher power reserve compared to the standard power adapter. It has very low output impedance and in combination with large filtration capability it can easily manage all power needs. Sound staging, darkness of silent backgrounds and small detail resolution will improve strongly and contribute to a far better overall performance of each component. \u003cbr\u003e\u003cbr\u003e \n\nStandard connection cable (3-pol) is included in delivery. Special highend super shielded connection cable in specified lengths 20cm, 40cm, 80cm and 1m available on request. \u003cbr\u003e\u003cbr\u003e \n\n\nFeatures:- \u003cbr\u003e\n\n• Purest and cleanest power using non-switching power supply  \u003cbr\u003e\n\n• Soft start system avoids current inrush in primary winding \u003cbr\u003e \n\n• Audio type toroidal transformer \u003cbr\u003e \n\n• Main isolating transformer with copper foil shielding\u003cbr\u003e  \n\n• Secondary voltage rectification with precise regulation\u003cbr\u003e  \n\n• High filtration capacity (10.000 µF for each output)\u003cbr\u003e  \n\n• Low ESR capacitors\u003cbr\u003e  \n\n• Low noise components with surge protection \u003cbr\u003e \n\n• Available in silver or black\u003cbr\u003e\u003cbr\u003e \n\nSpecifications:-\u003cbr\u003e \n\nInput voltage AC 230V\/50Hz IEC C15 connector  \n (120V\/60Hz US)\u003cbr\u003e  \nOutput voltage \/ current 20V \/ 3A max  \n (version 4-way has 4 oputputs 20V\/3A)\u003cbr\u003e  \nFiltration capacity 10.000 µF  \n (version 4-way has 4 x 10.000 µF)\u003cbr\u003e  \nOutput voltage ripple rejection better than 75dB \u003cbr\u003e \nDimensions W x H x D 201 x 72 x 195mm \u003cbr\u003e \nWeight 4.800g  ","brand":"Pro-Ject","offers":[{"title":"Silver","offer_id":57409456537932,"sku":"PROJECTPOWBOXRSUNI4WAYS","price":457.5,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":57420937724236,"sku":"PROJECTPOWBOXRSUNI4WAYB","price":457.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Power-Box-RS-Uni-4-way-Silver.jpg?v=1777486204"},{"product_id":"pro-ject-a-d-phono-box-s2","title":"Pro-Ject A\/D Phono Box S2","description":"A\/D Box S2 Phono\u003cbr\u003e\u003cbr\u003e\n\n•Phono stage with analogue-digital converter\u003cbr\u003e\n•USB output for recording to a computer\u003cbr\u003e\n•Additional Line input\u003cbr\u003e\u003cbr\u003e\n\nThe A\/D Box S2 Phono has been designed as an affordable, effective tool for digitally archiving your precious analogue media.\u003cbr\u003e\u003cbr\u003e\n\nBeing able to take digital audio back-ups of vinyl records or analogue tapes allows you to preserve your precious music, and also take some of your favourite analogue-only tracks with you on the go. By recording to a computer you can also use special software tools to remove unwanted pops, clicks or crackles. The A\/D Box S2 Phono achieves this by converting Phono or Line level inputs to a digital USB data stream for a Windows, Apple or Linux computer to handle. \u003cbr\u003e\u003cbr\u003e\n\nOnce a source is connected into the back panel, the input selector on the front panel allows for easy changing between connected devices. At the same time as the music is transferred to USB, it's also possible to continue listening via the RCA analogue outputs - effectively allowing A\/D Box S2 Phono to double-up as an input extender for an existing hi-fi system, while also acting as an MM\/MC phono stage built on the same design principles as Pro-Ject's coveted Phono Box model.\u003cbr\u003e\u003cbr\u003e\n\nThe Gain control on the front panel is only for the digital data stream. Many computer soundcards struggle with loud audio inputs - the gain attenuator on the A\/D Box S2 Phono allows you to adjust this level - striking the best possible balance between convenience and fidelity.\u003cbr\u003e\u003cbr\u003e\n\nKey Features:-\u003cbr\u003e\n•Analogue-Digital Converter for recording your analogue media\u003cbr\u003e\n•Connect a turntable to the phono input\u003cbr\u003e\n•MM or MC cartridges supported\u003cbr\u003e\n•Connect an analogue tape player to the line input\u003cbr\u003e\n•Switch between inputs on the front panel\u003cbr\u003e\n•Attenuate digital gain level\u003cbr\u003e\n•Record to a computer via USB\u003cbr\u003e\n•Ultra-low noise and distortion\u003cbr\u003e\n•SMD circuitry for short signal paths\u003cbr\u003e\n•Premium S2 chassis\u003cbr\u003e\n•Available in black or silver\u003cbr\u003e\u003cbr\u003e\n\nTechnical Specifications:-\u003cbr\u003e\n\nInput impedance: MC 100 ohms \/ MM 47k ohms  \u003cbr\u003e\nLoad capacity: 120pF\u003cbr\u003e\nGain:  MM or high output MC: 40 dB low output MC: 60 dB \u0026amp; Line: 11dB \u003cbr\u003e\nSignal to noise ratio MM \/MC:  94dB \/ 75dB (A weighted)\u003cbr\u003e  \nTHD MM \/ MC :  \u0026lt; 0.01% \/ \u0026lt; 0.05% \u003cbr\u003e\nRIAA accuracy:   within 0.4dB\/20Hz - 20kHz \u003cbr\u003e\nAnalogue inputs:  RCA (Phono) \/ 3.5mm jack (Line) \u003cbr\u003e\nAnalogue output voltage :  9.5V (RCA)\u003cbr\u003e \nA\/D converter:   16-Bit Delta Sigma\u003cbr\u003e\nSampling-frequencies:   32, 44, 1 \u0026amp; 48kHz\u003cbr\u003e\nUSB interface :   USB1.1, Mini B \u003cbr\u003e \nSuitable for:  Windows, Mac\u003cbr\u003e  \nPower supply:  5V\/500mA DC \u003cbr\u003e\nPower consumption :  100mA DC \u0026lt; 1 watt standby \u003cbr\u003e\nDimensions:  103 x 37 x 127mm \u003cbr\u003e\nWeight  336g (Without PSU) ","brand":"Pro-Ject","offers":[{"title":"Silver Faceplate","offer_id":57409456570700,"sku":"PROJECTADPHONOBOXS2-S","price":145.83,"currency_code":"GBP","in_stock":true},{"title":"Black Faceplate","offer_id":57420938379596,"sku":"PROJECTADPHONOBOXS2-B","price":145.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-A-D-Box-S2-Phono-Black.jpg?v=1777486209"},{"product_id":"pro-ject-phono-box-ds","title":"Pro-Ject Phono Box DS","description":"This ultra low noise phono preamplifier benefits from outstanding circuit technology from Dr. Sykora, well-known from Phono Box DS+, in a slimmed version with almost same sound quality, but without display and relais switching at a more favourable price. For the first time nearly all setup options can be made via front panel, what makes circumstantial handling of mini dip-switches or jumpers obsolete. Exceptional performance and flexibility with almost any MM or MC cartridge makes Phono Box DS the best choice in its price class. A subsonic filter, that prevents your amplifier and speakers of ultra low rumble below 20Hz, is positioned on the rear panel. Carefully selected amplifier modules and audiophile-grade capacitors guarantee a breathtaking sound experience. Therefore Phono Box DS is a perfect cost-effective upgrade for most high-quality hifi-systems.  \u003cbr\u003e\u003cbr\u003e\nFeatures:- \u003cbr\u003e\n\n• MM and MC capable \u003cbr\u003e \n\n• Linear RIAA equalisation \u003cbr\u003e \n\n• Ultimate circuit technology from Dr. Sykora, slimplified  \n\n    version of Phono Box DS+ without display and relais switching\u003cbr\u003e  \n\n• Ultra low noise and low distortion levels\u003cbr\u003e  \n\n• SMD circuitry\u003cbr\u003e  \n\n• Subsonic filter (switchable on rear panel)\u003cbr\u003e  \n\n• Substantial setup options  \u003cbr\u003e\n\n• Comfortable switching via buttons on front\u003cbr\u003e  \n\n• Metal casing protects against vibration and interference \u003cbr\u003e \n\n• DC power supply (less than 1 watt standby power)\u003cbr\u003e  \n\n• Faceplate silver or black \u003cbr\u003e\u003cbr\u003e \n\nSpecifications:-\u003cbr\u003e\n\nInput impedance 10 \/ 100 \/ 1000ohms or 47kohms \u003cbr\u003e \nLoad capacity switchable 47pF 147pF, 267pF, 367pF  \n (only relevant for MM @ 47kohms)\u003cbr\u003e  \nGain MM or high output\u003cbr\u003e MC: 40, 50 dB  \n low output MC: 60 dB  \nSignal to noise ratio 80dB (A weighted @ 40dB input gain)\u003cbr\u003e  \nTHD less than 0,02% \u003cbr\u003e \nRIAA accuracy within 0,3dB\/20Hz - 20kHz \u003cbr\u003e \nSubsonic 20Hz \/ - 12dB \u003cbr\u003e \nInput and Output RCA \u003cbr\u003e \nPower supply 18V\/500mA DC; 220 - 240V, 50Hz \u003cbr\u003e \nPower consumption 100mA DC less than 1 watt standby \u003cbr\u003e \ndimensions W x H x D (D with sockets) 103 x 72 x 144 (156)mm  \u003cbr\u003e\nweight 1100g without power supply  \n","brand":"Pro-Ject","offers":[{"title":"Silver Faceplate","offer_id":57409456636236,"sku":"PROJECTPHONOBOXDSS","price":145.83,"currency_code":"GBP","in_stock":true},{"title":"Black Faceplate","offer_id":57420940509516,"sku":"PROJECTPHONOBOXDSB","price":145.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Phono-Box-DS.jpg?v=1777486217"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/collections\/pro-ject.jpg?v=1777392794","url":"https:\/\/www.stoneaudio.co.uk\/collections\/pro-ject.oembed?page=2","provider":"Stone Audio","version":"1.0","type":"link"}