{"title":"Turntables","description":"","products":[{"product_id":"pro-ject-debut-carbon-dc-turntable","title":"Pro-ject Debut Carbon DC Turntable","description":"The original Pro-Ject Debut was released in the late 1990’s during a time when CD was king, and the vinyl format was presumed to be all but gone. But well over a decade later the model still stands, and it deserves a key accreditation in the ongoing success of a rejuvenated vinyl and budget turntable market. The Debut symbolises all that is good about the vinyl market; it is easy to set-up and fantastic to listen to, with the right mixture of user-friendliness and opportunity to tweak and upgrade.\u003cbr\u003e\u003cbr\u003e\n\nAt the beginning of 2012, the new Debut Carbon expands on the Debut III in a variety of ways; namely the inclusion of an 8.6\" carbon fibre tonearm, 12\" platter and rear-mounted junction box. The new motor isolation system also utilises a wholly unique rubber compound developed exclusively by Ortofon A\/S to offer dramatically reduced resonance transference from motor.\u003cbr\u003e\u003cbr\u003e\n\nNow 2 years on the Debut Carbon DC benefits from an upgraded new DC power supply with ultra precision frequency DC-driven AC generator (matching the one used in the Pro-Ject Speed Box) for precision speed stability. The new DC model also prospers from the upgrade by using less power in operation and when not in use.\u003cbr\u003e\u003cbr\u003e\n\nThe new 9V AC motor upgrade also comes with an improved TPE motor suspension. This new suspension reduces vibration caused by the motor and is normally found on improved turntables such as the Pro-Ject Xpression Carbon UKX. \u003cbr\u003e\u003cbr\u003e\n\nThe Debut Carbon DC also sees the re-introduction of the Debut's famous colours! Not only is the Debut Carbon DC available in the gloss black finish as standard, but for the same cost you can also choose to have a statement-making Red, Blue, Green, Yellow, White, Purple or Light Grey gloss finish.\u003cbr\u003e\u003cbr\u003e\n\nKey Features:\u003cbr\u003e\n•New DC power supply with ultra precision frequency DC-driven AC generator (like the Speed Box) for ultimate speed stability\u003cbr\u003e\n•New TPE motor suspension \u003cbr\u003e\n•8.6\" one-piece carbon fibre tonearm, adding stiffness and reducing resonance around the pick-up cartridge (rarely found on budget turntables, due to high production costs).\u003cbr\u003e\n•High-quality counterweight - helping further reduce unwanted resonance.\u003cbr\u003e\n•Two isolation 'feet' made especially by Ortofon A\/S, used to decouple the motor from the plinth.\u003cbr\u003e\n•12\" platter.\u003cbr\u003e\n•Junction box installed, allowing for the easy upgrade of turntable interconnects.\u003cbr\u003e\n•Factory-fitted Ortofon 2m Red.\u003cbr\u003e\n•Various gloss-coloured finishes available.\u003cbr\u003e\n•Lid included\u003cbr\u003e\u003cbr\u003e\n\nTechnical Data:\u003cbr\u003e\n\n\nSpeed: 33,45 RPM (Manual Speed Change) \u003cbr\u003e \nDrive Principle: Belt Drive \u003cbr\u003e\nPlatter: 300mm Metal With Felt Mat \u003cbr\u003e\nMain Bearing: Stainless Steel \u003cbr\u003e\nWow \u0026amp; Flutter: +\/- 0.10% \u003cbr\u003e \nSpeed Drift: +\/- 0.80% \u003cbr\u003e \nSignal to Noise: - 68dB \u003cbr\u003e \nPre-Fitted Cartridge:  Ortofon 2M Red  \u003cbr\u003e\nTonearm: 8.6\" Carbon Fibre \u003cbr\u003e\nEffective Arm Length: 218.5mm \u003cbr\u003e\nEffective Arm Mass: 6.0g\u003cbr\u003e  \nOverhang: 18.5mm \u003cbr\u003e\nTracking Force: 10-30mN \u003cbr\u003e \nIncluded Accessories: RCA Cable, Lid  \u003cbr\u003e\nDimensions (WxHxD): 415 x 118 x 320mm - Lid Closed\u003cbr\u003e \nWeight: 5.6kg net  ","brand":"Pro-Ject","offers":[{"title":"Pro-Ject Debut Carbon DC Turntable - Light Grey","offer_id":57405969563980,"sku":"PDEBUTII","price":307.5,"currency_code":"GBP","in_stock":true},{"title":"Pro-Ject Debut Carbon DC Turntable - Gloss Black","offer_id":57415719125324,"sku":"PDEBUT3B","price":307.5,"currency_code":"GBP","in_stock":true},{"title":"Pro-Ject Debut Carbon DC Turntable - White","offer_id":57415719190860,"sku":"PDEBUT3W","price":307.5,"currency_code":"GBP","in_stock":true},{"title":"Pro-Ject Debut Carbon DC Turntable - Red","offer_id":57415719223628,"sku":"PDEBUT3R","price":307.5,"currency_code":"GBP","in_stock":true},{"title":"Pro-Ject Debut Carbon DC Turntable - Blue","offer_id":57415719256396,"sku":"PDEBUT3BLU","price":307.5,"currency_code":"GBP","in_stock":true},{"title":"Pro-Ject Debut Carbon DC Turntable  - Yellow","offer_id":57415719289164,"sku":"PDEBUT3Y","price":307.5,"currency_code":"GBP","in_stock":true},{"title":"Pro-Ject Debut Carbon DC Turntable - Green","offer_id":57415719321932,"sku":"PDEBUT3G","price":307.5,"currency_code":"GBP","in_stock":true},{"title":"Pro-Ject Debut Carbon DC Turntable - Purple","offer_id":57415719387468,"sku":"PROJECTDEBUTCARBON-P","price":307.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/pro-ject-debut-carbon-green.jpg?v=1777451669"},{"product_id":"sme-model-30-2","title":"SME MODEL 30\/2","description":"With its many original design features the Model 30\/2 is a unique turntable. There are no critical adjustments or setting up procedures. Its immaculate construction and finish stem from facilities and uncompromising quality control which have made SME a byword for engineering excellence. Judged by Germany’s AUDIO 'the best turntable of all time' the Model 30\/2 can be for the fortunate owner of an analogue collection the key to lasting musical enjoyment.\u003cbr\u003e\u003cbr\u003eSME have built pick-up arms for more than thirty-five years and the design and engineering experience gained has been applied in the Model 30\/2, a precision turntable created to compliment the SME Series V regarded by many as: 'the best pick-up arm in the world'.\u003cbr\u003e\u003cbr\u003eIn common with this arm the design of the Model 30\/2 takes special account of sonic considerations and with equipment of comparable quality can provide a listening experience that allows L.P. sound to be re-assessed. Detail, resolution, and neutrality are of a new order with a dynamic range that does justice to the original sound.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMODEL 30\/2\u003c\/b\u003e\u003cbr\u003eequipped for but not including SME precision pick-up arm.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMODEL 30\/2A\u003c\/b\u003e\u003cbr\u003ewith matching SME Series V precision pick-up arm.\u003cbr\u003e\u003cbr\u003eComplete with a comprehensive set of tools and equipment including Height Setting Gauge, Ø300mm Stroboscopic Disc, Reflex Record Clamp, Record Spindle Washer, Soft Cover and Operating Instruction Manual.\u003cbr\u003e\u003cbr\u003eDimensions: 450 x 350 x 220mm.\u003cbr\u003ePacking: Substantial wooden case with internal fitments.\u003cbr\u003eNet weight with power supply: 42,0kg.\u003cbr\u003eShipping weight approximately: 58,0kg","brand":"SME","offers":[{"title":"SME MODEL 30\/2","offer_id":57405979525452,"sku":"SMEM30\/2","price":21875.0,"currency_code":"GBP","in_stock":true},{"title":"A","offer_id":57415724466508,"sku":"SMEM30\/2A","price":24541.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/SME-Model-30-2.jpg?v=1777451897"},{"product_id":"sme-v-tonearm","title":"SME V Tonearm","description":"SME engineers, recognising the potential of the latest complementary equipment, accepted the challenge to design and build a pick-up arm which unlike others in existence would make no detectable sound contribution of its own. The work took almost four years and the measure of its success is the acceptance of the Series V precision pick-up arm by technical experts and users as one of the world's truly great audio products.Series V sound has an almost startling dynamic range and neutrality enabling high levels to be enjoyed. It escapes the 'LP' sound and demonstrates that structural resonances in pick-up arms are responsible for much that makes vinyl records readily discernible from master tapes.\u003cbr\u003e\u003cbr\u003e\n\nThe functioning of a pick-up arm appears simple but is in fact very complex. All cartridges employ relative motion between armature and stator portions of a generating system to produce the signal output. Reproduction can only be true therefore when all movement representing groove modulation is made by the armature to which the stylus cantilever is attached and none by the stator represented by the cartridge body. Unless the pick-up arm holds the latter against even the minutest movement at audio frequencies the signal will be modified in some way. The result is a subtle loss of clarity, dynamic range and transient attack that can make the sound from even the best system tiring to listen to.\u003cbr\u003e\u003cbr\u003e\n\nThe following notes will help a better understanding of the problems and how they were resolved in this radically new design.\u003cbr\u003e\u003cbr\u003e\n\nIn common with any mechanical device the behaviour of a pick-up arm is governed by three properties of matter that also define the laws of motion. The first property is mass which opposes any change in motion. The effective mass of an arm and cartridge resists motion least at low frequencies but increasingly as frequency rises. It is this resisting force which makes the operation of a cartridge possible. At subsonic frequencies the armature and stator move as one allowing the slow movements needed to negotiate the record surface without generating a signal. At audio frequencies however the increased resisting force causes the armature to move relative to the stator and a signal is produced. The transition point between these two conditions is important for a clean low frequency response and is established by the compliance of the cartridge and the total effective mass of the arm and cartridge body.\u003cbr\u003e\u003cbr\u003e\n\nThe second property is stiffness which resists bending or flexing. It is a restoring force, proportional to position or deflection.\u003cbr\u003e\u003cbr\u003e\n\nThe third property is damping or resistance to motion. Here motion means velocity and without it there is no damping. The total equation of force acting on a pick-up arm is therefore the sum of three parts: acceleration acting on the mass, velocity acting on the internal or applied damping, and bending or deflection acting on the stiffness.\u003cbr\u003e\u003cbr\u003e\n\nMass and stiffness determine how much a pick-up arm will flex and vibrate and damping determines how long it will vibrate. Damping alone cannot prevent flexing or vibration, it can only lessen its effect. The stiffer the arm the less it will flex and vibrate; the more massive the less it will vibrate.\u003cbr\u003e\u003cbr\u003e\n\nVery high tone arm mass would therefore be ideal to control the cartridge had it not to be strictly limited to preserve the required relationship of compliance and mass already referred to. Stiffness, the second part of the equation of force, must therefore be used also. Infinite stiffness would be ideal but we have to be more realistic. In a beam of given length stiffness is dependent on the material used, its cross-sectional area and in the case of a cylindrical beam increases as the cube of its diameter. Doubling the diameter will make it eight times as stiff.\u003cbr\u003e\u003cbr\u003e\n\nAlthough the proportions of the Series V tone-arm reflect these facts, tests showed that the required stiffness was still unattainable using conventional fabricated construction. A one-piece die-casting in magnesium alloy was therefore adopted comprising the shell, tube and balance weight cantilever. 36% lighter but only 25% less stiff than commonly used aluminium, a magnesium arm of the same mass could be as much as 25% stiffer. In addition die-casting would allow the numerous changes of section required to optimise effective mass and control standing wave effects. Finally magnesium's high self-damping factor was augmented with an internal constrained layer to damp the tubes’ high frequency resonance.\u003cbr\u003e\u003cbr\u003e\n\nThe Series V's excellent vibration analysis results owe much to the high stiffness and damping of its tone-arm, but stiffness to be of value must refer to something rigid. Tests disclosed the many points at which rigidity could be lost so all other principal parts were pressure die-cast allowing each to be tailored precisely for its purpose and utilising the high mass of zinc-based alloy to damp out vibration. Ultra-high quality 10mm and 17mm ABEC 7 radial shielded bearings were selected to provide low friction vertical and lateral movements, while holding the tone-arm motionless against front\/back and torsional forces. The support afforded by these large, wide contact angle bearings, excludes the possibility of chatter and wear or damage in normal use.\u003cbr\u003e\u003cbr\u003e\n\nThe horizontal axis bearings carry the tone-arm in a substantial yoke also housing a spring tracking force mechanism. The bearing axis is at record mean level to minimise warp-wow effect and the spring, a possible source of coloration, is resonance controlled.\u003cbr\u003e\u003cbr\u003e\n\nThe main pillar is 23mm diameter, machined from steel, heat treated, ground and honed. It houses the vertical shaft and bearings, and carries the control bracket incorporating the anti-skate mechanism, lowering\/raising control and motion damper.\u003cbr\u003e\u003cbr\u003e\n\nThe base is highly original. The pillar moves vertically between two jaws and horizontally between two slideways. Locking is effected by transverse clamp bolts, spring loaded to maintain settings when released. The design ensures extremely positive clamping maintaining the rigidity of the assembly which is then secured to the mounting surface of the deck with four cap-head screws.\u003cbr\u003e\u003cbr\u003e\n\nThe weight housing is undersung to correct its centre of gravity and provide a vibrationally non-reflective termination of the tone-arm. A damped two-point suspension carries the tungsten-alloy balance weight . Its unique shape enables it to be positioned close to the fulcrum reducing inertia to minimise the effects of record warp and eccentricity.\u003cbr\u003e\u003cbr\u003e \n\nMovement is made along mitre-ways by rotating a thumb wheel and leadscrew carried in twin ball races. Only l9mm of travel is required to cover the whole balance range and a lever effects clamping in any position. \u003cbr\u003e\u003cbr\u003e\n\nElectrical aspects received no less attention. The internal wiring is of specially developed silver litz, each conductor having five insulated strands. The damped output-socket swivels allowing it to take up its own position for installation and to minimise vibration transmission when used on a sub-chassis. The high quality linear crystal oxygen-free copper audio lead selected for its electrical and mechanical characteristics is terminated at one end with SME right-angle 5-pole DIN contra-plug and gold-plated phono plugs at the other.\u003cbr\u003e\u003cbr\u003e\n\nThe magnesium tone-arm is finished in satin black enamel, other major parts in black chrome with details in bright chrome and polished stainless steel. Each unit is complete with tools, accessories, and an advanced drill jig\/template and alignment system simplifying mounting and exact placing. \u003cbr\u003e\u003cbr\u003e\n\nStructurally inert the Series V embodies every worthwhile feature in a pick-up arm. As part of a complete system working in concert with a comparable turntable and cartridge it will provide wide range transparent reproduction of vinyl L.P's, bringing the listener audibly closer to the clarity and dynamics of the original performance.\u003cbr\u003e\u003cbr\u003e\n\n•Unique one-piece pressure die-cast tone-arm utilising the advantages of magnesium, replace conventional fabricated construction. \u003cbr\u003e\n•Internal constrained layer damps minute residual vibration leaving the tone-arm acoustically inert. \u003cbr\u003e\n•Fine machined cartridge platform, enamel free to avoid interface resonance.\u003cbr\u003e\n•A Stainless steel cross shaft, ground and thread ground. Carried in massive yoke on 10mm ABEC 7 ball races. Axis at record mean level to minimise warp-wow.\u003cbr\u003e \n•Dynamic balance graduated vertical tracking force (VTF) control applies 0-3g x 0.125g through resonance controlled spring. \u003cbr\u003e\n•Unique assembly gives high rigidity and allows bearings to be critically adjusted before tone-arm is fitted. \u003cbr\u003e\n•Stainless steel vertical shaft, ground and thread ground, with integral 16mm diameter flange to couple shaft and yoke. \u003cbr\u003e\n•23mm diameter steel pillar, heat treated, ground and honed, carries two 17mm ABEC 7 ball races, widely spaced to resist tilt. \u003cbr\u003e\n•Anti-skate control operates through tension spring and filament. Dial corresponds with VTF and has positive OFF position. \u003cbr\u003e\n•Lowering\/raising control gives smooth positive action. Height of lift can be adjusted. \u003cbr\u003e\n•Subsonic lateral mode fluid damper can be instantly adjusted or cancelled. \u003cbr\u003e\n•Dual-lock base provides movement control with high rigidity. \u003cbr\u003e\n•Tungsten-alloy balance weight carried on damped two-point suspension. Extra-low inertia design assists warp riding. \u003cbr\u003e\n•Underslung weight housing corrects centre of gravity and provides non-reflective tone-arm termination. Adjustment leadscrew journalled in twin ball races with lever clamping.\u003cbr\u003e\n•Swivelling damped output socket minimises vibration transmission in sub-chassis use. \u003cbr\u003e\n•Fine adjustment of arm height (VTA).\u003cbr\u003e\n•Reference lines on tone-arm facilitate VTA setting. \u003cbr\u003e\n•Fine adjustment of horizontal tracking angle (HTA).\u003cbr\u003e\n•New design alignment protractor sets HTA with greater accuracy. \u003cbr\u003e\n•Advanced jig\/template system guarantees correct positioning.\u003cbr\u003e\u003cbr\u003e\n\nSME V-D Tonearm with Detachable Headshell\u003cbr\u003e\n\nThe Sme Series V D Tonearm with Detachable Headshell is a unique, one-piece pressure die-cast tone-arm that offers high rigidity and allows for critical adjustment of bearings. This model includes a detachable headshell. ","brand":"SME","offers":[{"title":"SME V Tonearm","offer_id":57405979722060,"sku":"SMEV","price":4333.33,"currency_code":"GBP","in_stock":true},{"title":"SME V\/MCS Tonearm","offer_id":57415738589516,"sku":"SMEVMCS","price":4650.0,"currency_code":"GBP","in_stock":true},{"title":"SME V-D (VD) Tonearm","offer_id":57415738622284,"sku":"SMEVD","price":4625.0,"currency_code":"GBP","in_stock":true},{"title":"SME V GPD Tonearm","offer_id":57415738655052,"sku":"SMEVGPD","price":4645.83,"currency_code":"GBP","in_stock":true},{"title":"SME GPD\/MCS Tonearm","offer_id":57415738687820,"sku":"SMEGPDMCS","price":4979.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/SME-V.jpg?v=1777451906"},{"product_id":"michell-gyrodec-turntable","title":"Michell GyroDec Turntable","description":"\u003ch3\u003eThe classic Michell turntable\u003c\/h3\u003e\nThe GyroDec turntable first introduced in the early 1980’s had a design far beyond any other turntable at the time. Utilising a hanging pendulum style sub chassis and isolated drive motor, it literally turned turntable design on its head!\u003cbr\u003e\u003cbr\u003e\nThe modern GyroDec may look very similar to the original 1980’s design, the reality however is that it is a far more sophisticated beast. Everything from the motor and power supply to the platter and main bearing have been redesigned and improved over time to ensure the performance and reliability of the turntable remains class leading, yet the design continues to turn heads!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003eFEATURES\u003c\/h3\u003e\n\u003cb\u003eLow contact area feet:\u003c\/b\u003e The solid aluminium feet of the turntable are shaped so the area in contact with the supporting surface is very small, this is done to minimise the transfer of vibrations from the supporting furniture into the turntable.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eHigh density acrylic base:\u003c\/b\u003e This provides a rigid non resonant surface to fix the suspension system to.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eThree point spring suspension system:\u003c\/b\u003e Three suspension towers are fixed to the acrylic base to hold the suspension springs in place and provide height adjustment for the sub chassis.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eWeighted pendulum style sub chassis:\u003c\/b\u003e Hanging on the three suspension springs, this provides a rigid dense platform to mount the main bearing, platter and tonearm assembly, ensuring there is no movement between them, while also acting as a ‘resonance \/ vibration sink’ drawing away unwanted vibrations from the sensitive elements of the turntable.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eInverted oil circulating main bearing:\u003c\/b\u003e Contrary to traditional designs, our main bearing has the point of rotation at the top of the assembly, not at the bottom. This orientation allows us to fully lubricate the inside of the entire bearing while the platter is turning. We achieve this by way of a modified Archimedean screw that we machine into the inside bore of the bearing. The oil is drawn from a reservoir at the base of the main bearing up to the thrust ball at the top, fully lubricating as it goes, it then returns to the reservoir via a waste hole drilled into the bearing spindle. Lubricating the precision parts of the main bearing in this way means that any potential for noise or vibration created by the rotation of the platter is avoided.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eImpedance-matched platter with solid brass weights:\u003c\/b\u003e The platter material was chosen for its vibration dampening characteristics and because sonically it is a very similar material to vinyl, so it has a very neutral sound characteristic. The brass weights are added to give the platter extra mass and subsequently more momentum when spinning. This greatly improves speed stability and helps keep wow and flutter to a minimum.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eFree standing motor unit:\u003c\/b\u003e The motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eHinged lid:\u003c\/b\u003e The turntable comes with a hinged clear acrylic lid to protect the turntable from dust and damage. The hinges are made in two parts that allow the lid to be easily removed if required.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eRecord clamp:\u003c\/b\u003e Supplied with a standard record clamp, this helps flatten warped or uneven vinyl and reduce resonance within the vinyl disk.","brand":"Michell Engineering","offers":[{"title":"Silver","offer_id":57406032740684,"sku":"MGYRO-S","price":2291.67,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":57415750811980,"sku":"MGYRO-B","price":2499.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/michell-GyroDec-black.jpg?v=1777452498"},{"product_id":"michell-orbe-turntable","title":"Michell Orbe Turntable","description":"\u003ch3\u003eFlagship Vinyl Playback System\u003c\/h3\u003e\nThe Orbe is Michell Engineering's flagship turntable, it builds upon all that was learnt from developing the GyroDec and takes it to the next level.\u003cbr\u003e\u003cbr\u003e\n\nCapable of delivering a true audiophile listening experience, the Orbe has to be heard to be believed.\u003cbr\u003e\u003cbr\u003e\n\n2 levels of isolation, a massive 60mm thick vibration damping platter and the most sophisticated power supply and motor configuration Michell have ever created, help raise the Orbe to levels of performance, orders of magnitude above its modest price point.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003eFEATURES\u003c\/h3\u003e\n\u003cb\u003eLow contact area feet:\u003c\/b\u003e The solid aluminium feet of the turntable are shaped so the area in contact with the supporting surface is very small, this is done to minimise the transfer of vibrations from the supporting furniture into the turntable.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eDual high density acrylic bases:\u003c\/b\u003e Separated by 3 pin points the acrylic bases of the Orbe not only provide a rigid non resonant surface to fix the suspension system to, they also create a very efficient isolation platform to help eliminate structural feedback.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eThree point spring suspension system:\u003c\/b\u003e Three suspension towers are fixed to the secondary acrylic base to hold the suspension springs in place and provide height adjustment for the sub chassis.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eWeighted pendulum style sub chassis:\u003c\/b\u003e Hanging on the three suspension springs, this provides a rigid dense platform to mount the main bearing, platter and tonearm assembly, ensuring there is no movement between them, while also acting as a ‘resonance \/ vibration sink’ drawing away unwanted vibrations from the sensitive elements of the turntable.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eInverted oil circulating main bearing:\u003c\/b\u003e Contrary to traditional designs, our main bearing has the point of rotation at the top of the assembly, not at the bottom. This orientation allows us to fully lubricate the inside of the entire bearing while the platter is turning. We achieve this by way of a modified Archimedean screw that we machine into the inside bore of the bearing. The oil is drawn from a reservoir at the base of the main bearing up to the thrust ball at the top, fully lubricating as it goes, it then returns to the reservoir via a waste hole drilled into the bearing spindle. Lubricating the precision parts of the main bearing in this way means that any potential for noise or vibration created by the rotation of the platter is avoided.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eExtra heavy Impedance-matched platter:\u003c\/b\u003e The platter material was chosen for its vibration dampening characteristics and because sonically it is a very similar material to vinyl, so it has a very neutral sound characteristic. The extra mass of the Orbe platter gives it great momentum when spinning aiding in speed stability.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eFree standing motor unit:\u003c\/b\u003e The motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eOrbe controller power supply:\u003c\/b\u003e The most sophisticated power supply we manufacture, the Orbe controller uses a large toroidal transformer, Never Connected™ circuitry and servo motor control technology to make sure the platter is always turning at the correct speed. All the time the platter is turning, the motor is reporting back what the RPM is, if this changes even slightly, the controller automatically adjusts its output to correct the change. The result is that the speed stability of an Orbe turntable is absolutely rock solid.\nHinged lid: The turntable comes with a hinged clear acrylic lid to protect the turntable from dust and damage. The hinges are made in two parts that allow the lid to be easily removed if required.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eOrbe record clamp:\u003c\/b\u003e The Orbe clamp is a screw-down design, which allows you to exert more force on to the vinyl when clamping it to the platter, than our standard clamps allow. This further helps flatten warped and uneven vinyl and eliminate resonance in the vinyl disk.","brand":"Michell Engineering","offers":[{"title":"Black","offer_id":57406033527116,"sku":"ORBE-B","price":3995.83,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":57415751041356,"sku":"MICHELLORBE-S","price":3995.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/michell-orbe-black.jpg?v=1777452509"},{"product_id":"michell-hr-power-supply","title":"Michell HR Power Supply","description":"The HR Power Supply is a low-noise electronic power source for the DC motors as found on the TecnoDec, GyroDec and Gyro SE turntables.\u003cbr\u003e\u003cbr\u003e\n\nAdding extra stability to the power supply for the motor, the HR features the novel Never-Connected circuit, and has a user-adjustable speed control on its back plate.\n\n\u003cbr\u003e\u003cbr\u003eFitting is simple – just unplug the motor lead from the existing supply and connect it to the HR. An IEC mains lead comes supplied.\n\n\u003cbr\u003e\u003cbr\u003ePlease note that the HR Power Supply is now only available in a black acrylic case. Two year warranty.","brand":"Michell Engineering","offers":[{"title":"Default Title","offer_id":57406227677516,"sku":"MICHELLHRPSU","price":487.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Michell-HR-PSU-black.jpg?v=1777453351"},{"product_id":"clearaudio-smart-matrix-professional-cleaning-machine","title":"Clearaudio Smart Matrix Professional Cleaning Machine","description":"\u003cp\u003eThe smart matrix is a supreme record cleaning machine with unrivalled quality at this price. Easy handling, straight forward silent operation and professional level cleaning performance make the matrix the most accessible industry level cleaning machine available.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe new, enhanced Smart Matrix Professional replaces the previous Smart Matrix model.\u003cbr\u003e \u003cbr\u003eKey features include:\u003cbr\u003eImproved vacuum cleaning performance\u003cbr\u003eNew rigid and damped chassis, significantly reducing ambient noise during operation of the powerful vacuum system\u003cbr\u003eImproved polymer-based platter with a soft, non-reactive surface to protect vinyl records\u003cbr\u003eBi-directional rotation and a precision manufactured self-adjusting vacuum tube ensure deeper cleaning of record grooves\u003cbr\u003eNew extended 3 year Manufacturer's guarantee\u003cbr\u003e\u003c\/p\u003e","brand":"Clearaudio","offers":[{"title":"Default Title","offer_id":57407448449356,"sku":"CLEARAUDIOSMATRIX","price":875.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/clearaudio-smart-matrix-pro.jpg?v=1777457369"},{"product_id":"clearaudio-pure-groove-essence-record-cleaning-fluid","title":"Clearaudio Pure Groove Essence Record Cleaning Fluid","description":"Clearaudio Pure Groove Essence Record Cleaning Fluid\u003cbr\u003e\u003cbr\u003e\n\nClearaudio Pure Groove cleaning fluid essence\u003cbr\u003e\u003cbr\u003e\n\nHigh efficient essence for record cleaning, excellent cleaning results. This essence has to be mixed with Ethanol (92%) (Not provided).\u003cbr\u003e\u003cbr\u003e\n\nWe recommend this fluid for all record cleaning machines.\u003cbr\u003e\u003cbr\u003e\n\nAvailable in 350ml, 700ml and 1.75 Litre - see table below of Pure Groove Essence provided and Ethanol (92%) required to make up.\u003cbr\u003e\u003cbr\u003e\n\n\n                \n350ml Pure Groove Essence plus 150ml Ethanol (92%) makes 0.5 litre\u003cbr\u003e\n700ml  Pure Groove Essence plus 300ml Ethanol (92%) makes 1.0 litre\u003cbr\u003e\n1.75L   Pure Groove Essence plus 750ml Ethanol (92%) makes 2.5 litres","brand":"Clearaudio","offers":[{"title":"Clearaudio Pure Groove Essence Fluid - 350 ml","offer_id":57407900844364,"sku":"CAPUREGROOVEESSENCEF350ml","price":20.83,"currency_code":"GBP","in_stock":true},{"title":"Clearaudio Pure Groove Essence Fluid - 700ml","offer_id":57416992325964,"sku":"CAPUREGROOVEESSENCEF700ml","price":33.33,"currency_code":"GBP","in_stock":true},{"title":"Clearaudio Pure Groove Essence Fluid - 1.75 Litre","offer_id":57416992358732,"sku":"CAPUREGROOVEESSENCEF1.75","price":79.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Clearaudio-Pure-Groove-Essence-Fluid.jpg?v=1777462188"},{"product_id":"linn-sondek-lp12-turntable","title":"Linn Sondek LP12 Turntable","description":"Please note: no base board, sub-chassis, armboard or power supply are supplied with this product.\u003cbr\u003e\u003cbr\u003e \n\nLinn’s reference standard transcription turntable, the Sondek LP12 delivers unrivalled musical reproduction to get the most from your cherished vinyl collection.\u003cbr\u003e\u003cbr\u003eIntroduced in 1972, the Sondek LP12 was Linn’s first product and helped demonstrate that the most important element in any quality music system is the source of the music itself. Launched at a time when amplifiers and loudspeakers were seen as being most critical to the performance of any system, the Sondek LP12 showed that extracting more information from the record itself was the most critical challenge. Quite simply, information lost at the source is lost forever.\u003cbr\u003e\u003cbr\u003eSince its introduction over 30 years ago the Sondek LP12 has been the turntable by which all others are judged and each component has been continuously improved to extract even more information from a vinyl record.\u003cbr\u003e\u003cbr\u003eAt the heart of the Sondek LP12 is Linn’s patented, low-noise, single-point bearing. This advanced yet simple bearing design ensures the smooth motion of the turntable and eliminates noise to ensure that all you hear is the music.\u003cbr\u003e\u003cbr\u003eThe high mass, perfectly balanced, belt-driven platter maintains speed stability, while the solid wood plinth, suspended sub-chassis and stable arm platform combine to provide freedom from vibration and acoustic feedback.\u003cbr\u003e\u003cbr\u003eThe combination of these precision-engineered components creates a turntable with an unequalled ability to provide pitch accurate, faithful reproduction of your cherished vinyl collection.\u003cbr\u003e\u003cbr\u003ePlease note price is for the turntable only. A partnering range of Linn tonearms and cartridges are available separately to ensure you get the maximum performance from your Sondek LP12.\u003cbr\u003e\u003cbr\u003eThe Sondek LP12 is available in a choice of high-quality real wood veneer finishes. Linn's standard finishes are Black Ash, American Cherry, Maple, Rosenut or Walnut and Linn also offer a custom service for those who want a truly bespoke finish.\n\nLinn’s reference standard transcription turntable, the Sondek LP12 delivers unrivalled musical reproduction to get the most from your cherished vinyl collection.\u003cbr\u003e\u003cbr\u003eIntroduced in 1972, the Sondek LP12 was Linn’s first product and helped demonstrate that the most important element in any quality music system is the source of the music itself. Launched at a time when amplifiers and loudspeakers were seen as being most critical to the performance of any system, the Sondek LP12 showed that extracting more information from the record itself was the most critical challenge. Quite simply, information lost at the source is lost forever.\u003cbr\u003e\u003cbr\u003eSince its introduction over 30 years ago the Sondek LP12 has been the turntable by which all others are judged and each component has been continuously improved to extract even more information from a vinyl record.\u003cbr\u003e\u003cbr\u003eAt the heart of the Sondek LP12 is Linn’s patented, low-noise, single-point bearing. This advanced yet simple bearing design ensures the smooth motion of the turntable and eliminates noise to ensure that all you hear is the music.\u003cbr\u003e\u003cbr\u003eThe high mass, perfectly balanced, belt-driven platter maintains speed stability, while the solid wood plinth, suspended sub-chassis and stable arm platform combine to provide freedom from vibration and acoustic feedback.\u003cbr\u003e\u003cbr\u003eThe combination of these precision-engineered components creates a turntable with an unequalled ability to provide pitch accurate, faithful reproduction of your cherished vinyl collection.\u003cbr\u003e\u003cbr\u003ePlease note price is for the turntable only. A partnering range of Linn tonearms and cartridges are available separately to ensure you get the maximum performance from your Sondek LP12.\u003cbr\u003e\u003cbr\u003eThe Sondek LP12 is available in a choice of high-quality real wood veneer finishes. Linn's standard finishes are Black Ash, American Cherry, Maple, Rosenut or Walnut and Linn also offer a custom service for those who want a truly bespoke finish.","brand":"Linn","offers":[{"title":"Linn Sondek LP12 - Black","offer_id":57408135135564,"sku":"LINNSONDEKLP12B","price":1475.0,"currency_code":"GBP","in_stock":true},{"title":"Linn Sondek LP12 - Cherry","offer_id":57417481716044,"sku":"LINNSONDEKLP12C","price":1475.0,"currency_code":"GBP","in_stock":true},{"title":"Linn Sondek LP12 - Rosenut","offer_id":57417481847116,"sku":"LINNSONDEKLP12R","price":1475.0,"currency_code":"GBP","in_stock":true},{"title":"Linn Sondek LP12 - Oak","offer_id":57417481879884,"sku":"LINNSONDEKLP12M","price":1475.0,"currency_code":"GBP","in_stock":true},{"title":"Linn Sondek LP12 - Walnut","offer_id":57417482928460,"sku":"LINNSONDEKLP12W","price":1475.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/linn_sondek_lp12b.jpg?v=1777464457"},{"product_id":"linn-majik-lp12-mm","title":"Linn Majik LP12 MM","description":"The latest complete turntable package with a unique heritage, MAJIK LP12 will appeal to anyone who is passionate about music, but especially those customers - young and old alike - who are relishing the vinyl renaissance.\u003cbr\u003e\u003cbr\u003eThe original SONDEK LP12 revolutionised the hi-fi industry and remains the benchmark by which all turntables are judged today.\u003cbr\u003eMAJIK LP12 now gives more customers access to a genuine design icon and Linn-quality vinyl reproduction.\u003cbr\u003e\u003cbr\u003e\n\nTake the first step into high performance vinyl playback. And close the door behind you, you won't be turning back. Experience the iconic Sondek LP12 in an affordable package, powered by carefully selected Linn-engineered components.\u003cbr\u003e\u003cbr\u003e\nMajik LP12 includes Linn's latest sandwich-construction aluminium sub-chassis, patented single point Karousel bearing, and internal low noise power supply. Linn’s Krane tonearm and Adikt moving magnet cartridge complete the deck.\u003cbr\u003e\u003cbr\u003e\n\nConnect it directly to a Majik DSM, with its built-in phono stage, for a simple introduction to both high performance vinyl and streaming.\u003cbr\u003e\u003cbr\u003e\n\nCombining LP12 performance with unbeatable value, MAJIK LP12 comprises:\u003cbr\u003e• LP12 turntable chasis with NEW Karousel\u003cbr\u003e• Internal ‘MAJIK LP12 Power Supply’\u003cbr\u003e• Solid base\u003cbr\u003e• ADIKT MM cartridge\u003cbr\u003e• Krane Tonearm \u003cbr\u003e• 45RPM adaptor \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eGuaranteed to attract new Linn turntable customers, MAJIK LP12 is a complete package for maximum ease of purchase, but is also fully compatible with all LP12 components to offer a full range of performance upgrade paths.\u003cbr\u003eMAJIK LP12 integrates seamlessly with other MAJIK components in the range, with both MAJIK-I and MAJIK KONTROL featuring a MM phono stage suitable for this turntable. A lid can also be ordered separately for the product.\u003cbr\u003e\u003cbr\u003e(available in Black Ash, American Cherry, Oak, Rosenut, Walnut and now any high gloss finish (special order).)\u003cbr\u003e\u003cbr\u003eThis product requires professional set-up to achieve its true level of performance. Please contact us to arrange collection or installation when purchasing this product. ","brand":"Linn","offers":[{"title":"Standard Plinth","offer_id":57408193069388,"sku":"LINNMAJIKLP12B","price":3333.33,"currency_code":"GBP","in_stock":true},{"title":"Fluted Plinth","offer_id":57417741107532,"sku":"LINNMAJIKLP12C","price":3500.0,"currency_code":"GBP","in_stock":true},{"title":"High Gloss Plinth","offer_id":57417741238604,"sku":"LINNMAJIKLP12M","price":3608.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/MajikLP12_KraneTonearm_3Q_Playing_BlackAsh_WebRes.png?v=1781601057"},{"product_id":"linn-trampolin-2-base-board","title":"Linn Trampolin 2 Base Board","description":"The Trampolin base board is a rigid base for the Sondek LP12 turntable.\u003cbr\u003e\u003cbr\u003eDesigned to provide additional isolation for Sondek LP12 turntables, Trampolin is fixed directly to the wooden plinth of the turntable.\u003cbr\u003e\u003cbr\u003eIt is manufactured from high quality aluminium and features acoustic dampening material to minimise interference and provide an even better audio performance.\u003cbr\u003e\u003cbr\u003eThe Trampolin base board can be specified on all new Sondek LP12 turntables and can also be used to upgrade your existing Sondek LP12, bringing a revelation in performance and an even more involving musical experience. \u003cbr\u003e\u003cbr\u003eAdding Trampolin to your Sondek LP12 is a simple and effective way to improve the performance of your turntable.\u003cbr\u003e\u003cbr\u003e\n\nIncludes all 10 fixing screws.","brand":"Linn","offers":[{"title":"Default Title","offer_id":57408267485516,"sku":"LINNTRAMPOLIN","price":203.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/linn_trampolin.jpg?v=1777466030"},{"product_id":"linn-lp12-drive-belt-mcp-2379","title":"Linn LP12 Drive Belt MCP 2379","description":"Official Linn drive belt for Axis and Sondek LP12 Turntables.\u003cbr\u003e\u003cbr\u003e\n\nNeoprene Rubber Drive Belt for LP12, Axis and Basik turntables. \u003cbr\u003e\n\nLinn Product code: MCP 2379 ","brand":"Linn","offers":[{"title":"Default Title","offer_id":57408276136268,"sku":"LINN2C050","price":51.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/linn_lp12_belt.jpg?v=1777466095"},{"product_id":"linn-lp12-felt-mat-2w-060","title":"Linn LP12 Felt Mat 2W-060","description":"Linn replacement felt mat for LP12 and Axis turntables\u003cbr\u003e\u003cbr\u003e\nLinn product code: 2W-060","brand":"Linn","offers":[{"title":"Default Title","offer_id":57408276201804,"sku":"LINN2W060","price":15.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/linn_lp12_feltmat.jpg?v=1777466099"},{"product_id":"linn-t-kable","title":"Linn T-Kable","description":"\u003cp\u003eLinn’s new TKable tonearm cable significantly increases performance across the entire turntable range. Come and hear the difference a relatively simple, cost effective update can bring to your deck. \u003c\/p\u003e\n\u003cp\u003eMuch of the performance improvement is thanks to a new Linn-designed 5-pin connector which provides a more solid connection to the tonearm. Housed in a sleek aluminium casing, the connector fits into the base of the tonearm pillar for a seamless finish. \u003c\/p\u003e\n\u003cp\u003eIn addition to the new connector, a number of changes have been made to the tonearm cable which further enhances performance at each level. \u003c\/p\u003e\n\u003cp\u003eLinn’s flagship T-Kable has been completely revitalised with the new Linn connector as well as a new, more flexible shielded mogami microphone cable which minimises noise from the turntable. The T-Kable is supplied with Linn’s reference tonearm, Ekos SE, and is also available to buy as an upgrade for use with other tonearms (XLR and RCA versions available).\u003c\/p\u003e","brand":"Linn","offers":[{"title":"RCA - 1.2m","offer_id":57408282132812,"sku":"LINNTKABLE11","price":325.0,"currency_code":"GBP","in_stock":true},{"title":"RCA - 1.7m","offer_id":57418016129356,"sku":"LINNTKABLE17","price":385.83,"currency_code":"GBP","in_stock":true},{"title":"XLR - 1.2m","offer_id":57418016260428,"sku":"LINNTKABLE12XLR","price":325.0,"currency_code":"GBP","in_stock":true},{"title":"XLR - 1.7m","offer_id":57418016424268,"sku":"LINNTKABLE17XLR","price":385.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/linn-mogami-t-kable.jpg?v=1777466184"},{"product_id":"clearaudio-stroboscope-test-record-and-speed-light-set","title":"Clearaudio Stroboscope Test Record and Speed Light Set","description":"An optimum sound can only be achieved with the exact rotational speed!\u003cbr\u003e\u003cbr\u003e\nThe Stroboscope Test Record and the quartz-controlled Speed Light allow the exact adjustment of the turntable rotational speed, independent from country mains frequency.\u003cbr\u003e\nThe blue 300 Hz light of the Speed Light is independent from fluctuations in mains voltage, thereby avoiding errors inherent in using normal mains lighting.\u003cbr\u003e\nA quartz oscillator accurately generates the 300 Hz of the Speed light, making exact adjustment possible.\n \u003cbr\u003e\nEven at different mains voltages (Europe: 50Hz, USA: 60 Hz) it is possible to adjust the rotational speed of your turntable by just using the two-sided clearaudio Stroboscope Testrecord.\n","brand":"Clearaudio","offers":[{"title":"Default Title","offer_id":57408392266060,"sku":"CAAC076","price":158.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/CA_strobodiskset.jpg?v=1777466564"},{"product_id":"linn-majik-lp12-lid-pack-1405","title":"Linn Majik LP12 Lid (Pack 1405)","description":"Linn Majik LP12 clear Lid with hinges and back plates\u003cbr\u003e\u003cbr\u003e\nLinn Product Code: PACK 1405","brand":"Linn","offers":[{"title":"Default Title","offer_id":57408594510156,"sku":"LINNMAJIKLID","price":172.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/linn_lid.jpg?v=1777469090"},{"product_id":"linn-lp12-replacement-lid-pack-1456","title":"Linn LP12 Replacement Lid - (PACK 1456)","description":"Linn LP12 Moulded (clear) replacement lid With logo badge. No hinges or back plates supplied. Replace your scratched or damaged turntable Lid. ","brand":"Linn","offers":[{"title":"Default Title","offer_id":57408594575692,"sku":"LINNPACK1456","price":135.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/linn_lid_e438711f-03ff-4000-9b99-47a13f8d0a3c.jpg?v=1777469094"},{"product_id":"linn-sondek-lp12-armboards","title":"Linn Sondek LP12 Armboards","description":"Replacement Linn armboards for the Sondek LP12 turntable. These are the latest type 5-layer laminate armboards.\u003cbr\u003e\u003cbr\u003eThe standard Linn armboard is designed for Linn EKOS\/AKITO\/BASIK\/ITTOK tonearms.\u003cbr\u003e The Blank armboard can be cut to suit the tonearm of your choice. ","brand":"Linn","offers":[{"title":"Linn LP12 Armboard (PACK 1497\/2) - EKOS\/AKITO\/BASIK\/ITTOK","offer_id":57408595362124,"sku":"LINNLP12ARMBOARD","price":80.0,"currency_code":"GBP","in_stock":true},{"title":"Linn LP12 Armboard (2W-072) - SME","offer_id":57418371825996,"sku":"LINNLP12ARMBOARDSME","price":80.0,"currency_code":"GBP","in_stock":true},{"title":"Linn LP12 Armboard (2W-100) - Rega","offer_id":57418371858764,"sku":"LINNLP12ARMBOARDREGA","price":80.0,"currency_code":"GBP","in_stock":true},{"title":"Linn LP12 Armboard (2W-074) - Blank","offer_id":57418372219212,"sku":"LINNLP12ARMBOARDBLANK","price":80.0,"currency_code":"GBP","in_stock":true},{"title":"Linn LP12 Armboard (2W-071\/1P) - Naim","offer_id":57418372251980,"sku":"LINNLP12ARMBOARDNAIM","price":80.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/lp12-armboard.png?v=1780664333"},{"product_id":"linn-bearing-housing-cap-for-sondek-lp12","title":"Linn Bearing Housing Cap for Sondek LP12","description":"\u003cp\u003eReplacement Linn bearing housing cap (black) to prevent oil spilage or contamination during transportation.\u003c\/p\u003e\n\u003cp\u003eAlso great for working on the underside of your LP12 so that no oil spills out from the bearing.\u003c\/p\u003e","brand":"Linn","offers":[{"title":"Default Title","offer_id":57408606503244,"sku":"LINNBEARINGCAP","price":1.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/linn-bearing-caps.jpg?v=1777469520"},{"product_id":"pro-ject-6-perspex-sb","title":"Pro-Ject 6 Perspex SB","description":"'Product of the Year 2010' Hi-Fi Choice Awards 2010\u003cbr\u003e\u003cbr\u003e\n\n'Highly Commended' by Hi-Fi News.\u003cbr\u003e\u003cbr\u003e\n\nAwarded 5 Stars in What Hi-Fi?, Hi-Fi Ultimate Guide, March 2009.\u003cbr\u003e\u003cbr\u003e\n\nAwarded with the EISA Award - Best Product 2009 - 2010 European Turntable, HiFi News, October 2009.\u003cbr\u003e\u003cbr\u003e\n\n \n\n\u003cb\u003eGood sound from sound technology \u003c\/b\u003e\u003cbr\u003e\n\n• Magnet supported sub-chassis decouples platter and tonearm \u003cbr\u003e\n\n• Tonearm bearing comprises inverted hardened stainless tips in ABEC7 spec ballraces \u003cbr\u003e\n\n• Headshell and conical armtube formed from a single carbon fibre workpiece\u003cbr\u003e \n\n• Armtube allows adjustment of needle azimuth despite fixed headshell\u003cbr\u003e \n\n• Vertical tracing angle adjustable \u003cbr\u003e\n\n• MDF platter with perimeter belt drive, vinyl playing surface and record clamp\u003cbr\u003e \n\n• Inverted main bearing with ceramic thrust-pad \u003cbr\u003e\n\n• Sorbothane-damped aluminium cones \u003cbr\u003e\u003cbr\u003e\n\n \n\n\u003cb\u003eFeatures \u003c\/b\u003e\u003cbr\u003e\n\n• Pro-Ject 9cc Evolution tonearm \u003cbr\u003e\n\n• Nominal speeds 33 \/ 45 r.p.m. \u003cbr\u003e\n\n• Record clamp \u003cbr\u003e\n\n• Gold-plated RCA phono sockets \u003cbr\u003e\n\n• Dust cover \u003cbr\u003e\n\n• Transparent acrylic plinth \u003cbr\u003e\n\n• Pro-Ject spirit level supplied\u003cbr\u003e\u003cbr\u003e\n\n \n\n\u003cb\u003eTechnical data\u003c\/b\u003e\u003cbr\u003e\n\nNominal speeds - 33 \/ 45 r.p.m.\u003cbr\u003e\n\n\nDust cover - yes\u003cbr\u003e\n\n\nMagnet supported sub-chassis - yes\u003cbr\u003e\n\n\nRecord clamp - yes\u003cbr\u003e\n\n\nRCA phono sockets - yes\u003cbr\u003e\n\n\nSorbothane-damped aluminium cones - yes\u003cbr\u003e\n\n\nTonearm - Pro-Ject 9cc Evolution\u003cbr\u003e\n\n\nCarbon-fibre headshell and armtube - yes\u003cbr\u003e\n\n\nEffective tonearm length - 9 \" (230mm)\u003cbr\u003e\n\n\nEffective tonearm mass - 8g\u003cbr\u003e\n\n\nOverhang - 18mm\u003cbr\u003e\n\n\nSupplied counterweights - cartridge weights 5 - 7,5g, 7 - 10g, 9 - 11g and 10 - 14g\u003cbr\u003e\n\n\nDownforce range - 10 - 35mN\u003cbr\u003e\n\n\nSpeed variance - ±0,5 %\u003cbr\u003e\n\n\nWow and flutter - ±0,06 %\u003cbr\u003e\n\n\nSignal to noise - -73dB\u003cbr\u003e\n\n\nPlatter weight\/diameter - 2kg\/300mm\u003cbr\u003e\n\n\nPower supply type - Mains-fed outboard power supply 220 - 240V, 50 cycles or 100 - 110V, 60 cycles\u003cbr\u003e\n\n\nOutput voltage - 16V\/500mA AC\u003cbr\u003e\n\n\nPower consumption - 2W\u003cbr\u003e\n\n\nDimensions (lid open) - 460 x 420 x 465mm\u003cbr\u003e\n\n\nDimensions (lid closed) - 460 x 160 x 365mm\u003cbr\u003e\n\n\nWeight - 10,5kg\u003cbr\u003e\n\n\nDimensions (W x H x D)\u003cbr\u003e\n\n","brand":"Pro-Ject","offers":[{"title":"Default Title","offer_id":57409095729484,"sku":"PROJECT6PERSPEX","price":1291.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/project_6PSX.jpg?v=1777478050"},{"product_id":"pro-ject-elemental-turntable","title":"Pro-Ject Elemental Turntable","description":"The new Elemental table is a real \"plug'n'play\" turntable. No adjustment of counterweight and anti-skating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for the Ortofon OM cartridge series.\u003cbr\u003e\u003cbr\u003e \n\nAll the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in. \u003cbr\u003e\u003cbr\u003e\n\nThe hidden secret to the new 'table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.\u003cbr\u003e\u003cbr\u003e\n\nThe Elemental also comes in a Phono USB model\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\n\nKey Features:\u003cbr\u003e\n•Belt drive system with low vibration DC motor\u003cbr\u003e\n•Central gravity mass point made from artificial stone\u003cbr\u003e\n•Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom\u003cbr\u003e\n•Low resonance MDF platter with felt mat\u003cbr\u003e\n•Factory fitted Ortofon OM5e cartridge\u003cbr\u003e\n•8.6” ultra low mass tonearm with straight arm tube\u003cbr\u003e\n•Pre-adjusted tracking force \u0026amp; antiskating\u003cbr\u003e\n•Gold-plated RCA contacts \u0026amp; cartridge pins","brand":"Pro-Ject","offers":[{"title":"Red","offer_id":57409364361548,"sku":"PROJECTELEMENTALR","price":145.83,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":57420219482444,"sku":"PROJECTELEMENTALB","price":145.83,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":57420219711820,"sku":"PROJECTELEMENTALW","price":145.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/pro-ject-elemental-turntable-red.jpg?v=1777483901"},{"product_id":"pro-ject-elemental-phono-usb-turntable","title":"Pro-Ject Elemental Phono USB Turntable","description":"The new Pro-ject Elemental Phono USB table is a real \"plug'n'play\" all the way. No adjustment of counterweight and anti-skating is needed, because both are pre-adjusted. This new straight tonearm is optimised for Ortofon OM cartridge series.\u003cbr\u003e\u003cbr\u003e\n\nAll the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it into hi-fi system and computer. \u003cbr\u003e\u003cbr\u003e\n\nThe hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards and vinyl recording capability.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\nKey Features:\u003cbr\u003e\n•Belt drive system with low vibration DC motor\u003cbr\u003e\n•Central gravity mass point made from artificial stone\u003cbr\u003e\n•Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom\u003cbr\u003e\n•Low resonance MDF platter with felt mat\u003cbr\u003e\n•8.6” ultra low mass tonearm with straight arm tube\u003cbr\u003e\n•Pre-adjusted tracking force \u0026amp; antiskating\u003cbr\u003e\n•Gold-plated RCA contacts \u0026amp; cartridge pins\u003cbr\u003e\n•Integrated phono stage with precise RIAA equalisation\u003cbr\u003e\n•A\/D converter for vinyl recording with USB B output","brand":"Pro-Ject","offers":[{"title":"Red","offer_id":57409364656460,"sku":"PROJECTELEMENTALUSBR","price":190.83,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":57420220236108,"sku":"PROJECTELEMENTALB","price":190.83,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":57420220367180,"sku":"PROJECTELEMENTALUSBW","price":190.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/pro-ject-elemental-turntable-red_639d321c-c0c5-430d-8528-8bff950ee570.jpg?v=1777483905"},{"product_id":"avid-ingenium-plug-play-turntable","title":"AVID Ingenium Plug\u0026Play Turntable","description":"Ingenium Plug \u0026amp; Play \u003cbr\u003e\u003cbr\u003e\n\n\nSince its introduction in 2013, Avid's award winning Ingenium turntable has been the benchmark for entry level audiophile turntables. \n With the increased popularity of vinyl, especially novice customers and younger enthusiasts, it is now a good time to revisit this popular design.\u003cbr\u003e\u003cbr\u003e\n\n Ingenium Plug \u0026amp; Play builds on its predecessor, retaining the unique features, making some aesthetic improvements and straightforward installation.\n Complete with quality fitted tonearm and moving magnet cartridge, it's ready to use within ten minutes.... really plug \u0026amp; play\u003cbr\u003ev\n\n Sharing the same design philosophy and features from our more expensive designs, Ingenium Plug \u0026amp; Play has a true audiophile engineered quality.\n Such as our unique sapphire bearing and clamping system which efficiently channels unwanted vibrations away from the record to the chassis.\n This reduces the background noise of the record itself, so there is clarity to the music, the performance not vailed but vivid and transparent. \u003cbr\u003e\u003cbr\u003e\n\n In common with our other designs, isolating the main chassis is critical to maintain low coloration. We have employed the same optimised elastomer used in the Diva II giving excellent mechanical isolation of the playing surface, resulting in better information retrieval and resolution. \u003cbr\u003e\u003cbr\u003e\n\nIngenium Plug \u0026amp; Play offers people the chance of opening a window to quality audiophile vinyl reproduction, without feeling its \"just another turntable\"\u003cbr\u003e\u003cbr\u003e\n\n It's reassuringly an AVID turntable at an affordable price.\u003cbr\u003e\u003cbr\u003e \n\nTechnical Specifications:-\u003cbr\u003e\u003cbr\u003e\n\nDrive: Belt drive\u003cbr\u003e\nSpeeds: 33.3 and 45.0 RPM\u003cbr\u003e\nPlatter mass : 2.5 Kg\u003cbr\u003e\nBearing: Inverted stainless steel\u003cbr\u003e\nThrust point: Tungsten carbide\/Sapphire\u003cbr\u003e\nSuspension: Elastomer\u003cbr\u003e\nTonearm : AVID TA-1\u003cbr\u003e\nCartridge : AVID CA-1\u003cbr\u003e\nMotor : 115\/230v 12mNm ac synchronous\u003cbr\u003e\nVoltage input: 115-240vac 50\/60Hz 4 watts max. (regional)\u003cbr\u003e\nDimensions : 370 x 305 x 130mm (WxDxH)\u003cbr\u003e\nNet weight: 5.9 Kg (13lb) \u003cbr\u003e\nPackaging : 500 x 420 x 265mm (WxDxH)\u003cbr\u003e\nShipping weight: 9.0Kg (20lb)\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\nUPGRADES:\u003cbr\u003e\nUpgrade the supplied MDF platter to machined aluminium, finished in black, complete with record mat. A huge sonic upgrade! Easy to self install with full instructions.\n","brand":"AVID","offers":[{"title":"Avid Ingenium Plug\u0026Play (inc Arm and Cart) - Ex Demo","offer_id":57409434059084,"sku":"AVIDINGENIUMP\u0026P","price":1166.66,"currency_code":"GBP","in_stock":true},{"title":"Metal Platter Upgrade for AVID Ingenium Turntable","offer_id":57420645269836,"sku":"AVIDINGENIUMPLATTERUPGRADE","price":416.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Avid-Ingenium-PandP.jpg?v=1777485645"},{"product_id":"avid-diva-ii-turntable","title":"AVID Diva II Turntable","description":"Originally our entry-level model, the Diva II shares the design philosophy and key elements of our more expensive designs. Far from being hamstrung by compromise as many ‘cost-down’ turntables are, Diva II has been engineered holistically – each part designed specifically to contribute to an overall performance which is quite simply remarkable both in value and absolute terms. \u003cbr\u003e\u003cbr\u003e\n\n The foundation of the Diva II is an ultra rigid, one piece aluminium casting. The arm and platter are mounted to this using a sapphire bearing and tight clamping system. The Avid Diva II’s unique system of mechanical isolation efficiently channels unwanted vibrations away from both the record and platter into this rigid chassis. \u003cbr\u003e\u003cbr\u003e\n\n Platter construction is MDF, the mat cork composite in common with the both Volvere and Sequel models. The use of this platter coupled with the softer surface material ensures an impedance miss-match with the record and, with the aid of the clamp, reduces unwanted vibrations entering the platter.\u003cbr\u003e\u003cbr\u003e \n\n Isolating the main chassis is critical to maintain low coloration. We have employed a triple elastomer layer system using an incredibly effective tailored sorbothane compound as used in our  Isolating Support Platform, giving optimum mechanical isolation of the playing surface, resulting in better information retrieval and resolution. \u003cbr\u003e\u003cbr\u003e\n\n Although rare in affordable turntables, the benefits of an external power supply are hard to deny. We have equipped the Diva II with a purposed designed mains transformer and electronics to construct a supremely smooth and consistent rotational force. Feeding a powerful motor the resulting stability and the huge dynamic sound is instantly recognisable as Avid.\u003cbr\u003e\u003cbr\u003e\n\n\n\n\n\nSpecifications:-\u003cbr\u003e\u003cbr\u003e\n\n\n\n\nDrive\n \n: Belt drive\u003cbr\u003e\n \n\nSpeeds\n \n: 33.3 and 45.0 RPM\u003cbr\u003e\n \n\nPlatter mass \n \n: 2.5 Kg\u003cbr\u003e\n \n\nBearing\n \n: Inverted stainless steel\u003cbr\u003e\n \n\nThrust point\n \n: Tungsten carbide\/Sapphire\u003cbr\u003e\n \n\nSuspension\n \n: Triple layer 3 point elastomer \u003cbr\u003e\n \n\nTonearms \n \n: Std. cut for SME (adapters to order)\u003cbr\u003e\n \n\nMotor \n \n: 24v 12mNm ac synchronous\u003cbr\u003e\n \n\nPower supply \n \n: Separate control unit\u003cbr\u003e\n \n\nVoltage input\n \n: 100-240vac 50\/60Hz 20 watts max. (depending on region)\u003cbr\u003e\n \n\nDimensions \n \n: Turntable (overall) 450mm x 390mm x 140mm (WxDxH)\u003cbr\u003e\n \n\n\n \n: Turntable (footprint) 380mm x 340mm (WxD)\u003cbr\u003e\n \n \n: P.S.U. 158mm x 160mm x 60mm (WxDxH)\u003cbr\u003e\n \n\nNet weight\n \n: 9.0Kg (20lb) ex. PSU\u003cbr\u003e\n \n\nPackaging \n \n: 570mm x 530mm x 230mm (WxDxH)\u003cbr\u003e\n \n\nShipping weight\n \n: 14.0Kg (31lb)","brand":"AVID","offers":[{"title":"Default Title","offer_id":57409434255692,"sku":"AVIDDIVAIIB","price":2500.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/AVID-Diva-II.jpg?v=1777485663"},{"product_id":"avid-diva-ii-sp-turntable","title":"AVID Diva II SP Turntable","description":"Whilst Diva II sets the bar undoubtedly high, the Diva II SP edition reveals a genuine insight into the performance standards of high-end audio. Approaching the illustrious Volvere model in absolute terms, this is no mere cosmetic makeover.\u003cbr\u003e\u003cbr\u003e\n\n Control and precision in reproduction are of the very highest calibre; a benefit derived directly from the engineering effort applied to each and every turntable.\u003cbr\u003e\u003cbr\u003e\n\n A machined aluminium platter is the first and most obvious step-up; the vibration absorbing properties working symbiotically with the chassis. Combined with our unique, low-density, self-lubricating bearing system, torsional vibration is all but eliminated.\u003cbr\u003e\u003cbr\u003e\n\n Precision control of turntable speed is achieved with our Digital Signal processing engine. Variations in the mains supplies are ironed out to create a pure and abundant supply of power to the motor. This can be precisely and easily calibrated to achieve perfect platter speeds.\u003cbr\u003e\u003cbr\u003e\n\n Motor noise, vibration and control are all improved with the twin belt drive controlling platter dynamics and stability under load. The result? A smooth, yet dynamic sound quality, improved bass and treble definition.\u003cbr\u003e\u003cbr\u003e\n\n Owners of the original Diva II model are welcome to upgrade their system with these additional refinements.\u003cbr\u003e\u003cbr\u003e\n\n\n\n\n\nSpecifications:-\u003cbr\u003e\u003cbr\u003e\n\n\n\n\nDrive\n \n: Twin Belt drive\u003cbr\u003e\n \n\nSpeeds\n\n: 33.3 and 45.0 RPM (Adjustable)\u003cbr\u003e\n \n\nPlatter mass \n \n: 6.3 Kg\u003cbr\u003e\n \n\nBearing\n \n: Inverted stainless steel\u003cbr\u003e\n \n\nThrust point\n \n: Tungsten carbide\/Sapphire\u003cbr\u003e\n \n\nSuspension\n \n: Triple layer 3 point elastomer\u003cbr\u003e \n \n\nTonearms \n \n: Std. cut for SME (adapters to order)\u003cbr\u003e\n \n\nMotor \n \n: 24v 12mNm ac synchronous\u003cbr\u003e\n \n\nPower supply \n \n: Separate DSP Vari-Speed control unit\u003cbr\u003e\n \n\nVoltage input\n \n: 100-240vac 50\/60Hz 20 watts max. (depending on region)\u003cbr\u003e\n \n\nDimensions: \n \nTurntable (overall) 450mm x 390mm x 140mm (WxDxH)\u003cbr\u003e\n \n\n\n Turntable (footprint) 380mm x 340mm (WxD)\u003cbr\u003e\n \n \nP.S.U. 158mm x 283mm x 60mm (WxDxH)\u003cbr\u003e\n \n\nNet weight\n \n: 12.8Kg (28lb) ex. PSU\u003cbr\u003e\n \n\nPackaging \n \n: 570mm x 530mm x 230mm (WxDxH)\u003cbr\u003e\n \n\nShipping weight\n \n: 19.0Kg (42lb)","brand":"AVID","offers":[{"title":"Default Title","offer_id":57409435435340,"sku":"AVIDDIVAIIB","price":3333.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/AVID-Diva-II-SP.jpg?v=1777485667"},{"product_id":"avid-volvere-turntable","title":"AVID Volvere Turntable","description":"Many of the engineering innovations we have pioneered in our flagship, reference models are equally relevant to all our turntables. \nNowhere is this more evident than in the Volvere.\u003cbr\u003e\u003cbr\u003e\n\n This latest generation incorporates our latest DSP signal-generating power supply, now within its own casework and improved mains transformer, totally removing the vagaries of the mains power signal and allowing precise calibration of motor speed. Introduction of the new twin belt drive system and revised bearing has improved platter dynamics, yet further improving the sound quality. \u003cbr\u003e\u003cbr\u003e\n\n Conceived as a belt drive, sprung subchassis design, Volvere is designed and built to the same precision engineering standards as the Acutus turntable. Bespoke versions of the unique clamping, stainless steel bearing and suspension systems have been developed and applied to this novel design. \u003cbr\u003e\u003cbr\u003e\n\n External vibrations are dissipated by the unique AVID variable frequency suspension system, effectively isolating the entire system from extraneous influence – yet without the softening of dynamic response often allied to such systems. \u003cbr\u003e\u003cbr\u003e\n\n Suspension dynamics are further improved in this latest version with the increased rigidity of the main chassis as well as using revised lateral damping isolation bands and lastly but by no means least, a massive platter. \u003cbr\u003e\u003cbr\u003e\n\n The result? Vibration caused by the stylus during playback is transmitted to the subchassis directly through the main bearing and not absorbed into the platter. The clarity and depth of the performance under reference listening tests is a testament to the attention to detail bestowed on the design and the manufacture.\u003cbr\u003e\u003cbr\u003e\n\n\n\n\n\nSpecifications:-\u003cbr\u003e\u003cbr\u003e\n\n\n\n\nDrive\n \n: Twin Belt drive\u003cbr\u003e\n \n\nSpeeds\n \n: 33.3 and 45.0 RPM\u003cbr\u003e\n \n\nPlatter mass \n \n: 6.7 Kg\u003cbr\u003e\n \n\nBearing\n \n: Inverted stainless steel\u003cbr\u003e\n \n\nThrust point\n \n: Tungsten carbide\/Sapphire\u003cbr\u003e\n \n\nSuspension:\n \n3 point, springs in vertical, o-rings in lateral frequency\n \n \nvertical 3.2 Hz (variable), lateral 4.5 Hz\u003cbr\u003e\n \n\nTonearms \n \n: Std. cut for SME (adapters to order)\u003cbr\u003e\n \n\nMotor \n \n: Modified 24v 55mNm ac synchronous\u003cbr\u003e\n \n\nPower supply \n \n: DSP Vari-SPeed control unit\u003cbr\u003e\n \n\nVoltage input\n \n: 100-240vac 50\/60Hz 20 watts max. (depending on region)\u003cbr\u003e\n \n\nDimensions: \n \nTurntable (overall) 425 x 370 x 205mm (WxDxH)\u003cbr\u003e\n \n\n\n \nTurntable (footprint) 375 x 325mm (WxD)\u003cbr\u003e\n \n \nP.S.U. 158mm x 283mm x 60mm (WxDxH)\u003cbr\u003e\n \n\nNet weight:\n \n12.5Kg (28lb) turntable only\u003cbr\u003e\n \n \n2.2Kg (5lb) psu only\u003cbr\u003e\n \n\nPackaging \n \n: 450 x 480 x 500mm (WxDxH)\u003cbr\u003e\n \n\nShipping weight\n \n: 18.5Kg (41lb)","brand":"AVID","offers":[{"title":"Black","offer_id":57409435468108,"sku":"AVIDVOLVERESPB","price":5625.0,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":57420650021196,"sku":"AVIDVOLVERESPS","price":5625.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/AVID-Volvere-SP-Black.jpg?v=1777485672"},{"product_id":"avid-sequel-sp-turntable","title":"AVID Sequel SP Turntable","description":"Sequel is so much more than a step-up model from the Volvere. With a touch of high-end engineering finesse, the already robust chassis and structure benefit from a bespoke suspension system, bearing and platter.\u003cbr\u003e\u003cbr\u003e\n\n Following our policy of continuous improvement, upgrades to power supply and motor which we developed for our Acutus Reference model have also been applied here, using the same principles of DSP signal generation to reduce vibration and allow fine calibration of motor speed. \u003cbr\u003e\u003cbr\u003e\n\n The twin belt drive and revised bearing makes the improvement in sound quality instantly noticeable over the Volvere. \u003cbr\u003e\u003cbr\u003e\n Additionally our new improved stronger main chassis now integrates the arm cable management.\u003cbr\u003e\u003cbr\u003e\n\n Building upon the strengths of the standard Volvere model, the presentation is dramatically focussed and paints a vividly realistic image of the recording.\u003cbr\u003e\u003cbr\u003e \n\n Aside from the superlative audio performance, the Sequel is one of the more aesthetically pleasing models in the world of high-end turntables and a worthy centrepiece for any domestic hi-fi system. \u003cbr\u003e \u003cbr\u003e \n\n\n\n\n\n\n\nSpecifications:-\u003cbr\u003e \u003cbr\u003e \n\n\n\n\nDrive\n \n: Twin Belt drive\u003cbr\u003e \n \n\nSpeeds\n \n: 33.3 and 45.0 RPM\u003cbr\u003e \n \n\nPlatter mass \n \n: 6.7 Kg\u003cbr\u003e \n \n\nBearing\n \n: Inverted stainless steel\u003cbr\u003e \n \n\nThrust point\n \n: Tungsten carbide\/Sapphire\u003cbr\u003e \n \n\nSuspension:\u003cbr\u003e \n \n-  3 point, springs in vertical, o-rings in lateral frequency\u003cbr\u003e \n \n \n-  vertical 3.2 Hz (variable), lateral 4.5 Hz\u003cbr\u003e \n \n\nTonearms \n \n: Std. cut for SME (adapters to order)\u003cbr\u003e \n \n\nMotor \n \n: Modified 24v 140mNm ac synchronous\u003cbr\u003e \n \n\nPower supply \n \n: DSP Vari-SPeed control unit\u003cbr\u003e \n \n\nVoltage input\n \n: 100-240vac 50\/60Hz 20 watts max. (depending on region)\u003cbr\u003e \n \n\nDimensions: \u003cbr\u003e \n \nTurntable (overall) 425 x 370 x 205mm (WxDxH)\u003cbr\u003e \n \n\n\n \nTurntable (footprint) 375 x 325mm (WxD)\u003cbr\u003e \n \n \nP.S.U. 250 x 215 x 95mm (WxDxH)\u003cbr\u003e \n \n\nNet weight\n \n: 12.6Kg (28lb) turntable only\n \n \n: 3.5Kg (8lb) psu only\u003cbr\u003e \n \n\nPackaging \n \n: 450 x 480 x 500mm (WxDxH)\u003cbr\u003e \n \n\nShipping weight\n \n: 20.0Kg (44lb)\n ","brand":"AVID","offers":[{"title":"AVID Sequel Turntable - Black","offer_id":57409435500876,"sku":"AVIDSEQSPB","price":7500.0,"currency_code":"GBP","in_stock":true},{"title":"AVID Sequel Turntable - Silver","offer_id":57420650840396,"sku":"AVIDSEQSPS","price":7500.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/AVID-Sequel-SP-Black.jpg?v=1777485676"},{"product_id":"avid-acutus-classic-turntable-chrome","title":"AVID Acutus Classic Turntable - Chrome","description":"Acutus turntable is radically different from current design theories. Designed from a clean sheet, leaving nothing unexplored or unresolved. Setting a standard of musical reproduction others aspire to achieve. In brief, this is a belt drive, sprung subchassis design and this is where similarity with other designs stops. On first appearance you can see there is something different and you would be right.\u003cbr\u003e\u003cbr\u003e\n\n Vibration caused by the stylus during playback is transmitted to the subchassis directly through our newly revised unique single point bearing and not absorbed into the platter. This is achieved using a unique matting material and clamping system. External vibrations are isolated by a unique variable frequency suspension system, conveniently adjustable from above.\u003cbr\u003e\u003cbr\u003e\n\n A purpose designed power supply, incorporating our latest DSP signal generation makes for accurate speed settings. This coupled to a unique hand made motor, 10 times more powerful than normally used, drives a massive 10Kg platter with our new twin belt drive system making for excellent speed stability and sonic pictures of sound.\u003cbr\u003e\u003cbr\u003e \n\n Stunningly finished in Polished Chrome, this product is the natural choice of equipment for those who demand the best.\u003cbr\u003e\u003cbr\u003e\n\n\n\n\n\nSpecifications:-\u003cbr\u003e\u003cbr\u003e\n\n\n\n\nDrive\n \n: Twin Belt drive\u003cbr\u003e\n \n\nSpeeds\n \n: 33.3 and 45.0 RPM\u003cbr\u003e\n \n\nPlatter mass \n \n: 10.0 Kg\u003cbr\u003e\n \n\nBearing\n \n: Inverted stainless steel\u003cbr\u003e\n \n\nThrust point\n \n: Tungsten carbide\/Sapphire\u003cbr\u003e\n \n\nSuspension:\u003cbr\u003e\n \n: 3 point, springs in vertical, O-rings in lateral frequency\u003cbr\u003e\n \n \n: vertical 2.5 Hz (variable), lateral 4.5 Hz\u003cbr\u003e\n \n\nTonearms \n \n: Std. cut for SME (adapters to order)\u003cbr\u003e\n \n\nMotor \n \n: Hand built 24v 140mNm ac synchronous\u003cbr\u003e\n \n\nPower supply \n \n: DSP Vari-SPeed control unit\u003cbr\u003e\n \n\nVoltage input\n \n: 100-240vac 50\/60Hz 20 watts max. (depending on region)\u003cbr\u003e\n \n\nDimensions \n \n: Turntable (overall) 460 x 400 x 210mm (WxDxH)\u003cbr\u003e\n \n\nDimensions:\u003cbr\u003e \n \n: Turntable (footprint) 410 x 360mm (WxD)\u003cbr\u003e\n \n \n: P.S.U. 250 x 215 x 95mm (WxDxH)\u003cbr\u003e\n \n\nNet weight:\u003cbr\u003e\n \n: 19.0Kg (42lb) turntable only\u003cbr\u003e\n \n \n: 3.5Kg (8lb) psu only\u003cbr\u003e\n \n\nPackaging \n \n: 550 x 500 x 550mm (WxDxH)\u003cbr\u003e\n \n\nShipping weight\n \n: 30.0Kg (66lb)","brand":"AVID","offers":[{"title":"Default Title","offer_id":57409435533644,"sku":"AVIDACUTUSSPC","price":14583.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/AVID-Acutus-SP-chrome.jpg?v=1777485681"},{"product_id":"avid-acutus-reference-chrome","title":"AVID Acutus Reference - Chrome","description":"The product that launched the AVID brand, over a decade ago, onto the world hi-fi scene was the critically acclaimed Acutus turntable. For the many experts and enthusiasts who have subsequently lived with this turntable, it was the start of a journey to reconnect with their music collection. Time, however, marches onward and a decade is a long time in the life of an engineering company.\u003cbr\u003e\u003cbr\u003e\n\n It was decided to lift the bar higher still – to apply the accumulated knowledge of a decade of development and lessons learned.\u003cbr\u003e\u003cbr\u003e\n\n The resulting turntable is now available…the Acutus Reference. The Reference provides not just a subjective but an immediately obvious lowering of the noise floor; extension of both bass and treble responses and a significant dynamic improvement.\u003cbr\u003e\u003cbr\u003e\n\n The sense of realism needs to be experienced to be appreciated – something which we are happy to arrange for you with our exclusive world wide dealer network. \u003cbr\u003e\u003cbr\u003e\n\n…So enough puff. What are the actual differences between the Acutus and the Acutus Reference?\u003cbr\u003e\u003cbr\u003e\n\n The first, and perhaps the most influential, is the power supply. A full 1kVA is on tap. This supply, itself developed over three years is the most stable, linear supply we’ve ever experienced. The Advanced DSP control of the motor power is finely adjustable almost completely eliminating micro-vibrations from the motor unit.\u003cbr\u003e\u003cbr\u003e\n\n The motor suspension has been fine-tuned and a new twin belt drive system has been employed to aid grip and control. A detailed understanding of the metallurgic requirements of moving components has resulted in the refinement of the bearing system to self-lubricate and spin freely, but eliminate unwanted movement.\u003cbr\u003e\u003cbr\u003e\n\n The Acutus Reference is a rare jewel of precision engineering. The age old adage of ‘getting what you pay for’ is no more evident than in this superlative turntable.\u003cbr\u003e\u003cbr\u003e\n\n\n\n\n\nSpecifications:-\u003cbr\u003e\u003cbr\u003e\n\n\n\n\nDrive\n \n: Twin Belt drive\u003cbr\u003e\n \n\nSpeeds\n \n: 33.3 and 45.0 RPM\u003cbr\u003e\n \n\nPlatter mass \n \n: 10.0 Kg\u003cbr\u003e\n \n\nBearing\n \n: Inverted stainless steel\u003cbr\u003e\n \n\nThrust point\n \n: Tungsten carbide\/Sapphire\u003cbr\u003e\n \n\nSuspension:\u003cbr\u003e\n \n: 3 point, springs in vertical, O-rings in lateral frequency\u003cbr\u003e\n \n \n: vertical 2.5 Hz (variable), lateral 4.5 Hz\u003cbr\u003e\n \n\nTonearms \n \n: Std. cut for SME (adapters to order)\u003cbr\u003e\n \n\nMotor \n \n: Hand built 24v 140mNm ac synchronous\u003cbr\u003e\n \n\nPower supply \n \n: DSP Vari-SPeed control unit\u003cbr\u003e\n \n\nVoltage input\n \n: 100-240vac 50\/60Hz 300 watts max. (depending on region)\u003cbr\u003e\n \n\nDimensions \n \n: Turntable (overall) 460 x 400 x 210mm (WxDxH)\u003cbr\u003e\n \n\nDimensions:\u003cbr\u003e \n \n: Turntable (footprint) 410 x 360mm (WxD)\u003cbr\u003e\n \n \n: P.S.U. 415 x 350 x 140mm (WxDxH)\u003cbr\u003e\n \n\nNet weight:\u003cbr\u003e\n \n: 19.0Kg (42lb) turntable only\u003cbr\u003e\n \n \n: 20.1Kg (45lb) psu only\u003cbr\u003e\n \n\nPackaging:\u003cbr\u003e \n \n: (box1) 550 x 500 x 550mm (WxDxH)\u003cbr\u003e\n \n \n: (box2) 710 x 490 x 270mm (WxDxH)\u003cbr\u003e\n \n\nShipping weight\n \n: 55.0Kg (122lb)","brand":"AVID","offers":[{"title":"Default Title","offer_id":57409435566412,"sku":"AVIDACUTUSREFSPC","price":22916.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/AVID-Acutus-Reference-SP-Chrome.jpg?v=1777485685"},{"product_id":"elipson-omega-100-carbon-turntable","title":"Elipson Omega 100 Carbon Turntable","description":"Omega 100 Carbon Black\u003cbr\u003e\u003cbr\u003e\n\nElipson, the “godfather” of the French acoustic community, is introducing the Omega 100 Carbon Black.\u003cbr\u003e\u003cbr\u003e\n\nUnique aesthetic qualities\u003cbr\u003e\u003cbr\u003e\n\nThe Elipson Omega 100 Carbon Black has been designed to offer a streamlined, enjoyable user experience. Its large sub-chassis integrates a variety of functions which are showcased by a piece of chrome-plated or brushed metal. Its silhouette, finish, and meticulous construction are a tribute to sophisticated French design. Not one screw is visible, the cover is made-to-measure and the angles are rounded for a more elegant appearance. The use of carbon fiber for the tonearm and the sub-chassis offers added rigidity and an extra touch of distinction. The high-tech design creates a contrast with the nostalgia conjured up by the object itself, which makes this turntable the neo-vintage reference for the living room.\u003cbr\u003e\u003cbr\u003e\n\nA version integrating all optional functions \u003cbr\u003e\u003cbr\u003e\n\nEach of the Omega 100 RIAA BT Carbon Black turntable’s functions has been optimized. Its carbone tonearm, designed by the brand’s engineers, is equipped with a premium cartridge: the Ortofon 2M RED. A cueing lever has been added for an enhanced user experience. The sub-chassis benefits from a carbon fiber finish, making the Omega 100 RIAA BT Carbon Black an extra-solid, high-inertia turntable. The suspended motor entirely eliminates friction, while the extraordinarily precise rotational speed generator enables playback for 33, 45 and 78 rpm records.\u003cbr\u003e\u003cbr\u003e\n\nDesigned and built in France, the Elipson turntable is a testament to exceptional craftsmanship. A team of passionate experts ensures that Elipson turntables are manufactured with the same amount of care and attention to detail, every day.\u003cbr\u003e\u003cbr\u003e\n\nTechnical Specifications:-\u003cbr\u003e\u003cbr\u003e\n\nChassis: Carbon finish\u003cbr\u003e\nPlate: Pressed steel\u003cbr\u003e\nTonearm: Carbon\u003cbr\u003e\nCartridge: 2M RED\u003cbr\u003e\nCentralizer: Aluminium\u003cbr\u003e\nLifting arm: Aluminium\u003cbr\u003e\nCartridges compatible: MM\/MC\u003cbr\u003e\nDimensions (W x H x D): 450 x 120 x 380 mm\u003cbr\u003e\nWeight:5.8kg\u003cbr\u003e\nDimensions packaging (W x H x D): 585 x 275 x 465 mm\u003cbr\u003e\nWeight with packaging, unit: 7.6 kg","brand":"Elipson","offers":[{"title":"Default Title","offer_id":57409445167436,"sku":"ELIPSONOMEGA100CARBON","price":458.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Elipson-Omega-100-Carbon.jpg?v=1777485909"},{"product_id":"elipson-omega-100-riaa-bt-carbon-turntable","title":"Elipson Omega 100 RIAA BT Carbon Turntable","description":"100 RIAA BT Carbon Black\u003cbr\u003e\u003cbr\u003e\n\nThe Omega 100 RIAA BT Carbon Black is the ultimate Elipson turntable. Featuring a carbon finish, it integrates all the options proposed by the brand.\u003cbr\u003e\u003cbr\u003e\n\nAfter orchestrating the successful launch of the world’s first Bluetooth turntable, Elipson, the “godfather” of the French acoustic community, is introducing the Omega 100 Carbon Black.\u003cbr\u003e\u003cbr\u003e\n\nUnique aesthetic qualities\u003cbr\u003e\n\nThe Elipson Omega 100 Carbon Black has been designed to offer a streamlined, enjoyable user experience. Its large sub-chassis integrates a variety of functions which are showcased by a band of chrome-plated or brushed metal. Its silhouette, finish, and meticulous construction are a tribute to sophisticated French design. Not a single screw is visible, the cover is made-to-measure and the angles are rounded for a more elegant appearance. The use of carbon fiber for the tonearm and the sub-chassis offers added rigidity and an extra touch of distinction. The high-tech design creates a contrast with the nostalgia conjured up by the object itself, making this turntable a neo-vintage reference for the living room.\u003cbr\u003e\u003cbr\u003e\n\nAn ultra-connected turntable \u003cbr\u003e\n\nFaithful to its principles, Elipson aims to endow this mythical object with new functions. After having found that the majority of people buying LPs were under 30, the brand built a turntable which can be easily connected to all the Bluetooth speakers on the market. The carefully selected, state-of-the-art electronics offer a number of possibilities:\u003cbr\u003e\n\n• A premium phono preamp allowing the user to connect the turntable to any amplifier.\u003cbr\u003e\n\n• apt-X Bluetooth transmission for wireless connectivity and a wider range of placement options, letting the user enjoy the warm, analog sound of LPs with any portable speaker.\u003cbr\u003e\n\n• A USB output to allow the user to make digital copies of his or her favorite records, which may then be brought anywhere. \u003cbr\u003e\u003cbr\u003e\n\nOptimized Functions\u003cbr\u003e\n\nEach of the Omega 100 RIAA BT Carbon Black turntable’s functions has been optimized. Its carbon tonearm, designed by the brand’s engineers, is equipped with a premium cartridge: the Ortofon 2M RED. A cueing lever has been added for an enhanced user experience. The sub-chassis benefits from a carbon fibre finish, making the Omega 100 RIAA BT Carbon Black an extra-solid, high-inertia turntable. The suspended motor entirely eliminates friction, while the extraordinarily precise rotational speed generator enables playback for 33, 45 and 78 rpm records.\u003cbr\u003e\u003cbr\u003e\n\nThe world’s only preamplified, Bluetooth turntable “Made in France” \u003cbr\u003e\n\nDesigned and built in France, the Elipson turntable is a testament to exceptional craftsmanship. A team of passionate experts ensures that Elipson turntables are manufactured with the same amount of care and attention to detail, every day.\u003cbr\u003e\u003cbr\u003e\n\nTechnical Specifications:-\u003cbr\u003e\n\nChassis: Carbon finish\u003cbr\u003e\nPlate: Pressed steel\u003cbr\u003e\nTonearm: Carbon\u003cbr\u003e\nCartridge: 2M RED\u003cbr\u003e\nCentralizer: Aluminium\u003cbr\u003e\nLifting arm: Aluminium\u003cbr\u003e\nFrequency Response (±3 dB): 25Hz-20KHz (-3 dB\/+1 dB)\u003cbr\u003e\npreamp: Built-in high-end RIAA preamp\u003cbr\u003e\nBluetooth: Class 2 : -6dBm ~ 4 dBm \/ 2.4G : 2.402 à 2.480GHz\u003cbr\u003e\naptX: Yes\u003cbr\u003e\nUSB: Opto-isolated USB output allowing vinyl recording\u003cbr\u003e\nGain: MM : 40,5 dB \/ MC : 61 dB\u003cbr\u003e\nCrosstalk: MM :88 dB \/ MC :78 dB\u003cbr\u003e\nTHD: MM : 0,006 % \/ MC : 0,05 %\u003cbr\u003e\nSignal\/noise ratio: MM : 82 dB \/ MC : 76 dB\u003cbr\u003e\nDimensions (W x H x D): 450 x 120 x 380 mm\u003cbr\u003e\nWeight: 5.8kg\u003cbr\u003e\nDimensions packaging (W x H x D): 585 x 275 x 465 mm\u003cbr\u003e\nWeight with packaging, unit: 7.6 kg","brand":"Elipson","offers":[{"title":"Default Title","offer_id":57409445232972,"sku":"ELIPSONOMEGA100RIAABTCARBON","price":583.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Elipson-Omega-100-RIAA-BT-Carbon.jpg?v=1777485914"},{"product_id":"pioneer-pl-990-pl990-turntable","title":"Pioneer PL-990 (PL990) Turntable","description":"This fully automatic stereo turntable features a low-mass straight tone arm, precise DC servo motor and built-in phono equaliser. Simply connect to any auxilliary\/line input on our amplifier or mini system.\u003cbr\u003e\u003cbr\u003e\n\n• Precision DC servo motor: Pioneer Stable Hanging otor ends spindle wobble for smoother and more accurate platter rotation \u003cbr\u003e\n• Universal-type cartridge connector \u003cbr\u003e\n• Phono EQ included \u003cbr\u003e\n• Dimensions (W X H x D): 420 x 100 x 342 mm \u003cbr\u003e\n• Weight: 2,65 kg\u003cbr\u003e\n• Full automatic operation: To provide easy hands-off operation \u003cbr\u003e\n• Low-mass straight tone arm: Highly sensitive and resistant to resonance, track records better\u003cbr\u003e\n\n\n• Precision DC servo motor: Pioneer Stable Hanging otor ends spindle wobble for smoother and more accurate platter rotation \u003cbr\u003e\n• Universal-type cartridge connector \u003cbr\u003e\n• Phono EQ included \u003cbr\u003e\n• Dimensions (W X H x D): 420 x 100 x 342 mm \u003cbr\u003e\n• Weight: 2,65 kg","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":57409497104716,"sku":"PIONEERPL990B","price":124.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pioneer-PL-990-Turntable.jpg?v=1777487306"},{"product_id":"pioneer-pl-30-pl30-turntable","title":"Pioneer PL-30 (PL30) Turntable","description":"The PL-30 full-automatic, stereo turntable features an aluminium die-cast platter, tone arm and exchangeable headshell with high-performance MM cartridge. It provides easy hands-off operation, while the stable precision DC servo motor ends spindle wobble for smoother and more accurate platter rotation. To top it off, this turntable comes in an unobtrusive design that matches any décor.\u003cbr\u003e\u003cbr\u003e\n\nThe built-in phono equaliser with 'On\/Through' selector lets you select 'On' for connecting amps without phono terminal, or 'Through' when using an external phono equaliser.\u003cbr\u003e\u003cbr\u003e\n\n\n\n\n\nDouble-layered chassisThe PL-30 has a double-layered chassis with a 4mm-thick, metal plate and low centre of gravity for stable playback. It also comes with an original 5mm-thick rubber mat, which suppresses external vibration while firmly gripping the record.\u003cbr\u003e\u003cbr\u003e\n\n\nBetter trackingThis turntable comes with a low-mass straight tone arm and anti-skating dial for accurate tracking of the record. The tone arm is highly sensitive and resistant to resonance, while the dial applies a small counter force to make sure that the rotating disc doesn't distort the sound balance.\u003cbr\u003e\u003cbr\u003e\n\nSpecifications:-\u003cbr\u003e\u003cbr\u003e\nMain Features\u003cbr\u003e\nPower Requirements AC 220-240V \/ 50\/60 Hz .\u003cbr\u003e\nPower Consumption 2 Watt .\u003cbr\u003e\nWeight 5.6 kg .\u003cbr\u003e\nDimensions 435 x 110 x 372,6 mm .\u003cbr\u003e\nOutput 1 x RCA (gold-plated, stereo pin plug) .\u003cbr\u003e\nAccessories • Turntable sheet\u003cbr\u003e\n• Dust cover with removable hinges\u003cbr\u003e\n• Adapter for EP Record\u003cbr\u003e\n• Balance weight\u003cbr\u003e\n• Headshell with high-performance MM cartridge\u003cbr\u003e\n• Spare lead wires .\u003cbr\u003e\n• Anti-Skating Dial for Accurate Tracking\u003cbr\u003e\n• Speed selector\u003cbr\u003e\n• Size selector\u003cbr\u003e\n• Detachable power cord .\u003cbr\u003e\u003cbr\u003e\n\nTurntable\u003cbr\u003e\nDrive Method Belt Drive System .\u003cbr\u003e\nMotor DC Servo Motor .\u003cbr\u003e\nRotation Speed 33 1\/3 rpm, 45 rpm .\u003cbr\u003e\nWow and Flutter Less than 0.1% .\u003cbr\u003e\nS\/N Ratio 60 dB .\u003cbr\u003e\u003cbr\u003e\n\nTone Arm\u003cbr\u003e\nArm Type Static balance, straight-type tone arm .\u003cbr\u003e\nEffective Length 221.5 mm .\u003cbr\u003e\nOverhang 19 mm .\u003cbr\u003e\nStylus Pressure Variable Range 0-4 g (1 scale 0.1 g) .\u003cbr\u003e\nCartridge Weight 4.5-9.5 g (single cartridge)\n","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":57409555562828,"sku":"PIONEERPL30K","price":249.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pioneer-PL-30K-Turntable.jpg?v=1777488632"},{"product_id":"eat-c-sharp-turntable","title":"EAT C Sharp Turntable","description":"EAT, lead by Jozefina Lichtenegger, a lady with a love for elegance and design, went into the turntable business with a completely new approach. \u003cbr\u003e\u003cbr\u003e\n\nEuropean Audio Teams want to offer tables with the maximum of technology and Performance but still elegant looking. The Forte and Forte S with their special designed superlative heavy platter have been a revolution in the Highend Audio Market . Never a turntable combined such Kinetic energy in such elegant products. Later the E-Flat topped the concept with the first unseeable super falt highend platter in a wonderful mass loaded dual Motor Design.\nThe success of the E-Flat motivated EAT to bring an even more elegant and slim turntable to the market.\u003cbr\u003e\u003cbr\u003e\n\nThe C- SHARP\u003cbr\u003e\nThanks to new materials like Carbon Fibre and Termoplastic Elastomer, Eat was designing a new superflat table. The low profile base chassis is made out of highest density MDF. Because of its flatness this base sits perfectly stable on any surface! On this base the ultra low noise motor is mounted as well as 10 damping feets out of energy absorbing TPE (Termoplastic Elastomers = Hightech high energy absorbing damping material). The cone shape TPE columns carry a SANDWICH subchassis out of Carbon Fibre and MDF composite with ultimate rigidity.\u003cbr\u003e\u003cbr\u003e\n\nThe stiffness is important to be a super rigid base for the tonearm\/cartridge and bearing\/platter as there must be 100% zero moving tolerance between the distance of the groove and the tracking cartridge. All the rumble of the platter \/ bearing is directed in the TPE columns. On the other hand, the TPE avoids  unwanted energy of motor and surface or surrounding vibration leads to the subchassis or even to the tonearm cartridge.\u003cbr\u003e\u003cbr\u003e\n\nThe bearing is an oversized inverted with a inert, resonance free ceramic ball on top.   Around the bearing we set a super heavy 700g mass point which sucks up all energy arround. The stiff carbon subchassis helps to transport all vibration in this mass point, so vibrations are transferred to heat The platter itself  from a special alloy of very inert aluminium and is also damped by TPE inserts-It from 2 parts a subplatter and a mainplatter to keep it flat although having very high mass and kinetic energy.\n\u003cbr\u003e\u003cbr\u003e\nThe belt is made from special anti-static rubber. It is glued and then polished.\nThe tonearm itself is a completely new design which combines all advantages of a unipivot arm with a cardan design. The uni-pivot in the middle only helps the bearing to be less loaded. The traditional Cardan bearing insures high stabilty and ease of use with very low friction. Also inside the tonearm is a special silicon-based grease to damp the tonearm \/ cartridge resonances by more then 50%.\u003cbr\u003e\u003cbr\u003e\n\nThe tube is again made out of carbon , super stiff and rigid. The headshell we made out of special light and rigid aluminium to get a perfect combination of the advantages of carbon with the better inner damping of the aluminium as well as the possibility of tighter mounting of Highend MC cartridges.\nAn external DC powersupply unit with an AC Generator creates new total clean power for the motors. To be sure, you have also 33 \/45 electronic switching.\nA HIGHEND solution as the whole table.\u003cbr\u003e\u003cbr\u003e\n\n\nSpecifications:- \u003cbr\u003e\nNominal speed:\n33\/45 rpm, driven by microprocessor, separate control panel, lighted control buttons\u003cbr\u003e\nSpeed Variance:\n33 rpm: ± Less than 0,08%, 45 rpm: ± Less than 0,09%\u003cbr\u003e\nSignal to noise:\nS\/N Ratio ( mechanical noise): – 40 dB, Signal to noise (electrical noise): -70 dB\u003cbr\u003e\nDownforce range:\n0 – 30 mN\u003cbr\u003e\nSupplied counterweights:\nwithout additional insert → for cartridge 5 – 9g (125g), with additional insert → for cartridge 8,5 – 13g (142g)\u003cbr\u003e\nEffective tonearm mass:\n16.5 g\u003cbr\u003e\nEffective tonearm length:\n254 mm\u003cbr\u003e\nOverhang:\n16 mm\u003cbr\u003e\nPower consumption:\n8,5 W max \/ 0,5 W stanby\u003cbr\u003e\nVoltage:\nUniversal swith mode power supply 15 V DC \/ 1,6 A, 90-264 V AC, 47 – 63Hz\u003cbr\u003e\nDimensions (W × H × D):\n500 × 400 × 115mm without connectors, 500 × 435 × 115mm with connectors in the rear panel\u003cbr\u003e\nWeight (without box):\n13,5 kg + 0,5 kg Separated control panel\u003cbr\u003e\u003cbr\u003e\n\nC-Sharp Super Pack includes Turntable with high mass platter, dual motor belt driven system including C-Note 10 inch tonearm \u0026amp; dust cover with Ortofon MC Quintet Black Cartridge.\n\n","brand":"EAT","offers":[{"title":"EAT C Sharp Turntable","offer_id":57409596981580,"sku":"EATCSHARPTURNTABLE","price":2415.0,"currency_code":"GBP","in_stock":true},{"title":"EAT C Sharp Super Pack","offer_id":57422368833868,"sku":"EATCSHARPSUPERPACK","price":2831.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/awaiting-image_67c3f106-88c4-4c17-8449-5c081c5eea8d.jpg?v=1777489280"},{"product_id":"eat-e-flat-turntable","title":"EAT E-Flat Turntable","description":"European Audio Team Announces Its Third Turntable … With A Radical New Tonearm!\u003cbr\u003e \u003cbr\u003e\n\nEAT’s E-Flat is a new, forward-thinking turntable supplied with a revolutionary flat tonearm. Although flat arms have been seen in the past, none have been able to offer the rigidity necessary to deliver the stable performance expected of modern tonearms. Thanks to the continued evolution of carbon fibre, Forte has been able to create an arm with the practical and aesthetic benefits of a flat form, but without the weaknesses.\u003cbr\u003e\u003cbr\u003e\n\nE-Flat’s mission is to bring to the music lover the highest quality performance, but in a user-friendly design. Ultra-flat, ultra-light and ultra-rigid, the E-Flat tonearm measures 10in long. A unipivot bearing supports the E-Flat, its fully (and easily) adjustable counterweight decoupled by energy- and vibration-absorbing Sorbothane. The E-Flat’s unipivot system is extremely precise and accurately balanced, thanks to components endowed with especially hard metal surfaces. Unwanted motion often attributed to lesser unipivot designs is eliminated by the high mass of unipivot housing and the added security of two metal guides.\u003cbr\u003e\u003cbr\u003e\n\nA further valuable benefit is that its carbon-fibre arm “tube” can be changed by the user to address to specific cartridge requirements, with either lighter or heavier tubes to establish different arm\/cartridge resonant frequencies. Adjustable anti-skating and a damped cueing lever are also fitted.\nA flat arm tube opens up a number of possibilities for the designer – and the listener. Its shape encourages the design of a flatter platter with easier, visible arm levelling, and there is no taper to accommodate. With perfect integration to the unipivot design pillar, no hollow tube to suffer the inevitable echo effects or ringing, greater stiffness, a new and superior hanging counterweight design with very high damping properties, the E-Flat tonearm’s performance is truly quiet and incredibly “fast.”\u003cbr\u003e\u003cbr\u003e\n\nThis handsome and innovative arm is fitted to a turntable that adheres to the basic principles established by the existing models in the Forte family. A belt-drive design, it features two motors, like its ‘bigger sisters’. The two motors do not run in parallel, but act like a virtual 24-pole motor. The belt encircles an inner sub-platter, which is fitted with inside bearing made out of bronze bushings. The main platter rests on an inverted bearing and a ceramic ball, with a Teflon lining on the underside of the main platter.\u003cbr\u003e\u003cbr\u003e\n\nAs with the larger Forte record decks, the diameter of the platter is oversized compared to those on most competitors’ turntables. 33cm was chosen because the moving mass is twice that of a standard 30cm platter. Forte fits a vinyl mat made of recycled LP records to create a surface with properties sympathetic to the LPs it supports. The platter is filled underneath with Sorbothane to stop resonance, while Sorbothane is also used to damp the bearing housing, tonearm base and magnetic feet. In addition to the isolation provided by the magnetic feet, the bearing assembly and platter aperture are suspended. Also in common with the dearer Forte turntables, the Forte E-Flat exhibits an ideal balance between mass-loading and thoughtful subchassis design.\u003cbr\u003e\u003cbr\u003e\n\n\nSpecifications:-\u003cbr\u003e\nDimensions (WxHxD) 500x400x145mm\u003cbr\u003e\nTurntable weight 18,7kg\u003cbr\u003e\nPlatter weight 6,9kg\u003cbr\u003e\nPlatter diameter 340mm\u003cbr\u003e\nWow and Flutter +-0,01\u003cbr\u003e\nTonearm Flat, Carbone\u003cbr\u003e\nEffective length 254mm, 10 Inch\u003cbr\u003e\nMounting distance 238mm\u003cbr\u003e\nOverhang 16mm\u003cbr\u003e\nEffective mass 4mm 19.5g\u003cbr\u003e\nEffective mass 3mm 12.5g","brand":"EAT","offers":[{"title":"(with flat carbon tonearm)","offer_id":57409597079884,"sku":"EATEFLATTURNTABLE","price":3581.67,"currency_code":"GBP","in_stock":true},{"title":"(with tonearm and Yosegi moving coil cartridge)","offer_id":57422369325388,"sku":"EATEFLATTONEARMYOSEGICART","price":4581.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/EAT-E-Flat-Turntable.jpg?v=1777489289"},{"product_id":"eat-forte-s-turntable","title":"EAT Forte S Turntable","description":"After the first impressive model Forte, Euro Audio Team follows with the small brother EAT Forte S. \nThere has been a reduction in size of the platter from the 40 cm to 36m and its weight from the 20kg to the 15 kg. It is still amazing in comparison to the standard 30 cm. The sense behind it is to store inside as much as possible of moving mass that is getting most effective on the outer side of the big radius. \nThe platter incorporates from the inner side sorbothane damping and from the outer side black damping matt produced from the recycled vinyl that makes the platter completely quiet.\u003cbr\u003e\u003cbr\u003e\n\nTerrific inverted bearing construction with ceramic ball on the top faces to the Teflon. The pressure on the ceramic ball is reduced by two enormous neodymium magnets that are holding the platter and take over most of the load from the heavy platter. The big brother Forte has built in two motors in separate chassis that makes its imposing 70 cm width. EAT Forte S is \"only\" 55cm width and single-piece construction. It has also two AC motors but they are built symmetric on the right side besides of the platter, therefore you do not need two belts with different length as by big EAT Forte. Operating of the motor by display panel was getting simpler into the 3 main keys: 33.3, 45 and on\/off button.\u003cbr\u003e\u003cbr\u003e\n\nBoth turntables are mass-loaded with huge magnetic feet, which act as a sub chassis. Forte S uses four magnetic feet with possible change of the height. This brings impressive low and excellently dumped resonance frequency of entire system. Standard distortions have no meaning at all for S and his brother as well.\nThe dimensions of EAT Forte S are 55 × 45 × 25cm. The weight of the complete turntable is 44 kg. The weight of the package is 35 kg. It is available in 2 options, high gloss piano black and high gloss Makassar (ebony wood).\u003cbr\u003e\u003cbr\u003e\n\nSpecifications: \u003cbr\u003e\n\nElectronic speed change  33.33\/ 45.11\u003cbr\u003e\nSpeed variance ±0.09%\u003cbr\u003e\nWow and flutter ±0.009%\u003cbr\u003e\nSignal-to-noise ratio -73dB\u003cbr\u003e\nPower consumption 4W\u003cbr\u003e\nOutboard power supply 16V\/1.000mA AC, suitable for your country's mains supply\u003cbr\u003e\nDimensions (WxHxD) 550x250x440mm\u003cbr\u003e\nWeight 44kg","brand":"EAT","offers":[{"title":"High Gloss Makassar-with tonearm","offer_id":57409597112652,"sku":"EATFORTESMAKASSAR","price":4998.33,"currency_code":"GBP","in_stock":true},{"title":"High Gloss Piano Black-with tonearm","offer_id":57422369390924,"sku":"EATFORTESB","price":4748.33,"currency_code":"GBP","in_stock":false},{"title":"High Gloss Makassar-no tonearm","offer_id":57422369554764,"sku":"EATFORTESMAKNOARM","price":4498.33,"currency_code":"GBP","in_stock":false},{"title":"EAT Forte S SPB Turntable - High Gloss Piano Black-no tonearm","offer_id":57422369587532,"sku":"EATFORTESBNOTONEARM","price":3915.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/awaiting-image_4c5ae62b-cd8e-4135-b07f-bdc58220d400.jpg?v=1777489293"},{"product_id":"eat-forte-turntable","title":"EAT Forte Turntable","description":"A massive machine that gets the best out of your vinyl. Separate Sub Chassis and a mass loaded turntable gives you the best of both worlds. \u003cbr\u003e\n\nThe design of the Eat Forte turntable is based on a combination of two basic principles:\u003cbr\u003e\nSeparate Sub Chassis and a mass loaded turntable. The chassis of the table is very heavy and mass-loaded using metal-filled sand. The feet are magnetic and act as a sub chassis to support the table.\u003cbr\u003e\u003cbr\u003e\n\nPLATTER\u003cbr\u003e\n\nThe platter consists of two parts. The first part uses a soft alloy, the second part, a harder one. This reduces energy flow. The first part also incorporates the neodymium magnets. The platter weighs more than 20 kg (44 lbs). The diameter of the platter is 400 mm (15.75 1\/2) (not the usual 300 mm [11.8 1\/2]). Kinetic energy stored in such big platter turning at 33 RPM is an incredible 2460 Joules! This means that with the same weight you gain more moving mass on the platter. The platter also incorporates sorbothane damping to make it resonance free.\u003cbr\u003e\u003cbr\u003e\n\nVINYL MAT\u003cbr\u003e\n\nThe vinyl mat is made from recycled vinyl records creating a perfect interface for the record. A clamp holds the record on the vinyl mat.\u003cbr\u003e\u003cbr\u003e\n\nBEARING CONSTRUCTION\u003cbr\u003e\n\nThe bearing is not standard but inverted with an oversized polished shaft. A ceramic ball is used on the top because it is very hard and inert. This, in combination with a Tefl on plate as a bearing mirror, is also a good damping device. Teflon’s accurate satin surface produces perfectly smooth movement without any rumble. The platter has a magnetic suspension using neodymium magnets. By increasing the distance from the bearing to the cartridge, the small neodymium magnets eliminate magnetic infl uence on the cartridge. Due to the magnets we can still move a large mass allowing the bearing to see virtually no pressure. This avoids rumble. (A mass loaded platter usually causes high levels of rumble.) The pressure of the bearing is adjustable. There are existing different philosophies about bearing pressure. With the Forte turntable you can adjust it according your preferences and taste.\u003cbr\u003e\u003cbr\u003e\n\nMAGNETIC FEET\u003cbr\u003e\n\nThe table has large magnetic feet with a bearing and stabilization system. It guaranties close to 100% isolation from the floor and from airborne resonances. The magnetic bearing system allows us to use the extra silent Teflon -ceramic combination. Usually high pressure would cause the bearing to wear out over time. This does not happen because of the very low pressure created by the use of the magnetic system.\u003cbr\u003e\u003cbr\u003e\n\nMOTOR\u003cbr\u003e\n\nThe motor is a stand-alone, decoupled AC unit. It uses a sophisticated electronic circuit to create 100% clean AC. It is a very heavy motor with a lot of mass to reduce all the existing vibrations. Motor energy is absorbed by using a sandwich system of metal and MDF. They decided to use a “dual motor design” to eliminate noise in the motor. By using two relatively weak, but silent running motors, they achieved perfect torque.\u003cbr\u003e\u003cbr\u003e\n\nBELT\u003cbr\u003e\n\nLong belts usually have some amount of wobble. To avoid this we use a special silicon string. This movement is also absorbed by the bearing block and by the huge mass of the platter itself.\u003cbr\u003e\u003cbr\u003e\n\nEAT THE ENERGY\u003cbr\u003e\n\nThe EAT Forte turntable is all about eating energy. Energy from the ground is decoupled by magnetic feet.◾Energy from the air is decoupled from the heavy chassis that is made from MDF and fi lled metal sand.◾Energy from tone arm and cartridge is absorbed by using a heavy metal tone arm base isolated by sorbothane.◾Energy from the belt is captured by the mass of the platter and by the string itself.◾Energy from the motor is captured by the dual-motor design, the decoupled motor unit and the mass-loaded motor chassis.◾Energy of the bearing is catch by the ceramic ball, the Tefl on plate and the magnetic bearing construction.\u003cbr\u003e\u003cbr\u003e\n\nSPECIFICATIONS:- \u003cbr\u003e\n\nElectronic speed change * 33.33\/* 45.11\u003cbr\u003e\nSpeed variance ±0.09%\u003cbr\u003e\nWow and flutter ±0.008%\u003cbr\u003e\nSignal-to-noise ratio -73dB\u003cbr\u003e\nPower consumption 2W\u003cbr\u003e\nOutboard power supply 16V\/1.000mA AC, suitable for your country's mains supply\u003cbr\u003e\nDimensions (WxHxD) 700x250x440mm\u003cbr\u003e\nWeight 65kg","brand":"EAT","offers":[{"title":"SPB - Piano Black without tonearm","offer_id":57409597145420,"sku":"EATFORTETURN-BWTONEARM","price":6665.0,"currency_code":"GBP","in_stock":true},{"title":"SM - Makassar without Tonearm","offer_id":57422369653068,"sku":"EATFORTETURNMAKNOTONEARM","price":6165.0,"currency_code":"GBP","in_stock":false},{"title":"Piano Black Project EVO 12 inch with Tonearm","offer_id":57422369685836,"sku":"EATFORTETURNPBMB","price":7156.67,"currency_code":"GBP","in_stock":false},{"title":"Makassar - Project EVO 12 inch with Tonearm","offer_id":57422369718604,"sku":"EATFORTETURNMAKPROJECTEVO12","price":7406.67,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/EAT-Forte-Turntable.jpg?v=1777489298"},{"product_id":"pro-ject-2-xperience-sb-turntable","title":"Pro-Ject 2 Xperience SB Turntable","description":"The 2 Xperience SB DC is the latest evolution of the 2 Xperience turntable from Pro-Ject. This high-quality turntable, suitable for mid to high-end systems now hosts a plethora of improvements from its predecessor. \u003cbr\u003e\u003cbr\u003e\n\nThe deck provides minimum resonance with its heavy MDF plinth made using non-resonant construction techniques. The precision sandwich platter offers the perfect vinyl play back surface with its non-resonant properties and an ideal top surface to place your vinyl directly on to.\u003cbr\u003e\u003cbr\u003e \n\nThe new 9V AC motor allows for pristine play back speed and with the ability to switch between 33 and 45 RPM at the push of a button. The speed control mechanism is powered by a new DC power supply in order to achieve a clean noise-free electrical signal to the motor. The 2 Xperience SB sees the inclusion of a 9CC Evolution carbon fibre tonearm that adds to the already audiophile grade package as well as being fitted with an Ortofon 2M Silver cartridge.\u003cbr\u003e\u003cbr\u003e\n\nThe 2 Xperience SB DC is available in Olive, Walnut, Mahogany and Piano Black.\u003cbr\u003e\u003cbr\u003e\n\nKey Features: \u003cbr\u003e\n•Electronic speed control with ultimate speed stability\u003cbr\u003e\n•Precision balanced sandwich-platter with vinyl mat\u003cbr\u003e\n•Record clamp to tighten records to the platter\u003cbr\u003e\n•MDF Chassis\u003cbr\u003e\n•Audiophile grade 9cc Evolution tonearm\u003cbr\u003e\n•Inverted tonearm bearings (ABEC 7 quality)\u003cbr\u003e\n•Factory fitted with Ortofon 2M Silver Cartridge\u003cbr\u003e\n•Dust cover included \u003cbr\u003e\u003cbr\u003e\n\nTechnical Data:\u003cbr\u003e\n\n\nNominal Speeds: 33 \/ 45 RPM \u003cbr\u003e\nDust Cover: Yes, Supplied \u003cbr\u003e\nRecord Clamp: Yes, Supplied \u003cbr\u003e\nRCA Phono Sockets: Yes, Gold-Plated \u003cbr\u003e\nTonearm: Pro-Ject 9CC Evolution\u003cbr\u003e\n \nEffective Tonearm Length: 9\" (230mm)\u003cbr\u003e \nEffective Tonearm Mass: 8.5g \u003cbr\u003e\nOverhang: 18mm \u003cbr\u003e\nDownforce Range: 10 - 30mN \u003cbr\u003e\n \nSpeed Variance: ± 0.5%\u003cbr\u003e\n \nWow \u0026amp; Flutter: ± 0.08%\u003cbr\u003e\n \nSignal-to-Noise Ratio: -70dB\u003cbr\u003e\n \nOutput Voltage: 15V \/ 800mA DC\u003cbr\u003e\n \nPower Consumption: 4W Max. \/ Less than 0.5W Standby\u003cbr\u003e\n \nDimensions (W x H x D):\n 460 x 160 x 360mm (Lid Closed)\u003cbr\u003e\n \nWeight: 7.7Kg ","brand":"Pro-Ject","offers":[{"title":"Walnut","offer_id":57409731526988,"sku":"PROJECT2XPERSB-WAL","price":916.67,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":57422476738892,"sku":"PROJECT2XPERSB-B","price":916.67,"currency_code":"GBP","in_stock":false},{"title":"Olive","offer_id":57422476771660,"sku":"PROJECT2XPERSB-OLIVE","price":916.67,"currency_code":"GBP","in_stock":false},{"title":"Mahogany","offer_id":57422476804428,"sku":"PROJECT2XPERSB-MAH","price":916.67,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-2-xperience-SB-Walnut.jpg?v=1777492213"},{"product_id":"pro-ject-rpm-3-carbon-turntable","title":"Pro-Ject RPM 3 Carbon Turntable","description":"The latest edition to the RPM range of turntables follows on from where the hugely popular Genie 3 left off. The RPM 3 Carbon boasts a number of improvements from its sibling, the new RPM 1 Carbon.\u003cbr\u003e\u003cbr\u003e\n\n\n\nThe new RPM 3 Carbon design has been upgraded to significantly reduce resonance across the turntable. While maintaining the instantly recognisable shape, this turntable boasts improvements in the tonearm, bearing, and motor.\u003cbr\u003e\u003cbr\u003e\n\nThe brand new tonearm is a carbon fibre\/aluminium resin construct, made using special heat and pressure treatments. The result of this new design is a tonearm that is more solid and anti-resonant than ever before at this price, while maintaining a light weight. The arm is finished off with a pre-fitted Ortofon 2M Silver cartridge and a new magnetic anti-skate mechanism. The improved counterweight also utilises TPE damping in the form of an anti-resonant ring around the fixing point.\u003cbr\u003e\u003cbr\u003e\n\nThe new vinyl topped sandwich platter creates the perfect surface for your vinyl to play on with no need for a mat.\u003cbr\u003e\u003cbr\u003e\n\nThe completely decoupled motor is based upon the same design as the Xpression Carbon, powered by an AC generator that's connected to the new DC power supply. The inverted main bearing now utilises a ceramic ball, offering a more fluid and consistent platter rotation than ever before.\u003cbr\u003e\n\u003cbr\u003e\nAvailable in Red, White or Black high gloss finishes, the RPM 3 Carbon is a turntable package that offers truly phenomenal value for money.\u003cbr\u003e\u003cbr\u003e\n\n\nKey Features:\u003cbr\u003e\n•Precision belt drive using synchronous motor\u003cbr\u003e\n•Ultra-precision DC-driven AC generator motor power\u003cbr\u003e\n•Inverted platter bearing with ceramic ball\u003cbr\u003e\n•Vinyl topped sandwich platter\u003cbr\u003e\n•10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments\u003cbr\u003e\n•Magnetic anti-skating\u003cbr\u003e\n•Counterweight with TPE damping\u003cbr\u003e\n•Pre-fitted Ortofon 2M Silver cartridge\u003cbr\u003e\n•3 high-gloss colours (black, red, white)\u003cbr\u003e\n•Lid available as optional extra\u003cbr\u003e\u003cbr\u003e\n\nTechnical Data:\u003cbr\u003e\n\n\nPre-Fitted Cartridge: Ortofon 2M Silver\u003cbr\u003e\n \nNominal Speeds: 33 \/ 45 RPM\u003cbr\u003e\n \nDust Cover: No (Optional Extra)\u003cbr\u003e \nMotor Completely Decoupled: Yes \u003cbr\u003e\nRCA Phono Sockets: Yes \u003cbr\u003e\nS-Shaped Tonearm: Yes \u003cbr\u003e\nEffective Tonearm Length: 10\" (254mm)\u003cbr\u003e\n \nEffective Tonearm Mass: 15g \u003cbr\u003e\nOverhang: 16mm \u003cbr\u003e\nTracking Force: 0 - 25mN \u003cbr\u003e\nSpeed Drift: ± 0.14%\u003cbr\u003e\n \nWow \u0026amp; Flutter: ± 0.19%\u003cbr\u003e\n \nSignal to Noise: -71dB\u003cbr\u003e\n \nPlatter Weight \/ Diameter: 1.6kg \/ 300mm\u003cbr\u003e\n \nOutput Voltage: 15V \/ 800mA DC\u003cbr\u003e\n \nPower Consumption: 5W Max. \/ Less than 0.5W Standby \u003cbr\u003e\nDimensions (W x H x D): 447 x 118 x 373mm\u003cbr\u003e\n \nWeight: 5.5kg ","brand":"Pro-Ject","offers":[{"title":"Red","offer_id":57409732673868,"sku":"PROJECTRPM3-R","price":624.17,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":57422476869964,"sku":"PROJECTRPM3-W","price":624.17,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":57422476968268,"sku":"PROJECTRPM3-B","price":624.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-RPM-3-Carbon-Turntable-Red.jpg?v=1777492217"},{"product_id":"luxman-pd-171a-pd171a-turntable","title":"Luxman PD-171A (PD171A) Turntable","description":"Since the highly admired introduction of the PD-171 into the market in 2011, Luxman turntables have been renowned to deliver a sense of atmosphere that can only be achieved through the medium of vinyl, that every vinyl enthusiast strives to achieve. The PD-171A now has a highly rigid main chassis and heavy base ensuring stable rotation. Additional improvements to the motor, drive circuit and bearing section have also been made.\u003cbr\u003e\u003cbr\u003e\n\n\"It's easy to lose hours at a time listening to the PD-171, because it never fails to engage on an emotional level\" - Hi-Fi News Review - Highly Reccomended.\u003cbr\u003e\u003cbr\u003e\n\nFeatures:-\u003cbr\u003e\nElectric Circuit\u003cbr\u003e\n\n•Introduction of newly developed high-torque AC Motor\u003cbr\u003e\n•Motor drive uses similar circuit structure to high power amps\u003cbr\u003e\n•High-precision clock controlled generator circuit with 32-bit microphone embedded.\u003cbr\u003e\n•Reflective view type LED stroboscobe useful for adjustments to speed\u003cbr\u003e\u003cbr\u003e\n\n\nMechanism\u003cbr\u003e\n\n•Belt drive aluminium machining heavy turntable (5.0kg) utilising high inertia moment (approx 0.7t.2)\u003cbr\u003e\n•Hanging vibration-damping structure with 15mm thick machined aluminium plate\u003cbr\u003e\n•High-rigidity 16mm spindle with ball bearing for stable rotation\u003cbr\u003e\n•Wear-resistant and load-bearing polyether ketone (PEEK) material used in the bearing section\u003cbr\u003e\n•Floating mounted power transformer and AC motor\u003cbr\u003e\n•Hybrid vibration-damping structure with wood and metalv\n•Large-sized insulator with height adjustment function directly secured to aluminium chassis.\u003cbr\u003e\u003cbr\u003e\n\n\nExterior\u003cbr\u003e\n\n•Traditional wood-paneled design\u003cbr\u003e\n•AC inlet on rear panel for easy replacement of power cable\u003cbr\u003e\n•Detachable high-intensity LED stylus light\u003cbr\u003e\n•Cam support for 4mm acrylic dust cover (opens and closes via light)\u003cbr\u003e\u003cbr\u003e\n\nSpecifications:-\u003cbr\u003e \n\nDrive System Belt drive system \u003cbr\u003e\nMotor Reaction and AC synchronous motor \u003cbr\u003e\nPlatter 30cm machined aluminium plate \u003cbr\u003e\nRevolution 33 1\/3 rpm, 45 rpm (2 speeds selectable) \u003cbr\u003e\nRevolution adjustment range 5% (each rotation speed adjusts independently) \u003cbr\u003e\nWow and flutter 0.04% or less (W.R.M.S) \u003cbr\u003e\nPower source 230v (50 Hz) \u003cbr\u003e\nPower consumption 38w v\nDimensions (WxHxD) 492 x 140 (up to top face of platter), 195 (with dust cover mounted) x 407mm \n\n\n","brand":"Luxman","offers":[{"title":"Default Title","offer_id":57412364796236,"sku":"LUXMANPD171A","price":4583.33,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Luxman-PD-171A-Turntable.jpg?v=1777535055"},{"product_id":"luxman-pd-171al-pd171al-turntable","title":"Luxman PD-171AL Turntable","description":"Since the highly admired introduction of the PD-171 into the market in 2011, Luxman turntables have been renowned to deliver a sense of atmosphere that can only be achieved through the medium of vinyl, that every vinyl enthusiast strives to achieve. The PD-171A now has a highly rigid main chassis and heavy base ensuring stable rotation. Additional improvements to the motor, drive circuit and bearing section have also been made. The PD-171-AL is supplied without the tone arm, with the option of customising the turntable so you can enjoy the playback of vinyl to your exact tastes.\u003cbr\u003e\u003cbr\u003e\n\nElectric Circuit:\u003cbr\u003e\n\n•Introduction of newly developed high-torque AC Motor\u003cbr\u003e\n•Motor drive uses similar circuit structure to high power amps\u003cbr\u003e\n•High-precision clock controlled generator circuit with 32-bit microphone embedded.\u003cbr\u003e\n•Reflective view type LED stroboscobe useful for adjustments to speed\u003cbr\u003e\u003cbr\u003e\n\n\nMechanism:\u003cbr\u003e\n\n•Belt drive aluminium machining heavy turntable (5.0kg) utilising high inertia moment (approx 0.7t.2)\u003cbr\u003e\n•Hanging vibration-damping structure with 15mm thick machined aluminium plate\u003cbr\u003e\n•High-rigidity 16mm spindle with ball bearing for stable rotation\u003cbr\u003e\n•Wear-resistant and load-bearing polyether ketone (PEEK) material used in the bearing section\u003cbr\u003e\n•Floating mounted power transformer and AC motor\u003cbr\u003e\n•Hybrid vibration-damping structure with wood and metal\u003cbr\u003e\n•Large-sized insulator with height adjustment function directly secured to aluminium chassis.\u003cbr\u003e\u003cbr\u003e\n\n\nExterior:\u003cbr\u003e\n\n•Traditional wood-paneled design\u003cbr\u003e\n•AC inlet on rear panel for easy replacement of power cable\u003cbr\u003e\n•Detachable high-intensity LED stylus light\u003cbr\u003e\n•Cam support for 4mm acrylic dust cover (opens and closes via light)\u003cbr\u003e\u003cbr\u003e\n\n\nAvailable Tone Arm Bases:\u003cbr\u003e\n\n•OPPD-AB1: For SME 3009R\/3010R and other 9\/10\" tonearms\u003cbr\u003e\n•OPPD-AB2: For FR 64\/64S\/64FX, IKEDA IT-345\u003cbr\u003e\n•OPPD-AB3: For SAEC WE-308\u003cbr\u003e\n•OPPD-AB4: For SAEC WE-407\/23\u003cbr\u003e\n•OPPD-AB5: For Ortofon 212S\/212D\u003cbr\u003e\n•OPPD-AB6: DIY universal tonearm board\u003cbr\u003e\u003cbr\u003e\n\nTechnical Specification:- \u003cbr\u003e\nDrive System Belt drive system \u003cbr\u003e\nMotor Reaction and AC synchronous motor \u003cbr\u003e\nPlatter 30cm machined aluminium plate \u003cbr\u003e\nRevolution 33 1\/3 rpm, 45 rpm (2 speeds selectable)\u003cbr\u003e \nRevolution adjustment range 5% (each rotation speed adjusts independently) \u003cbr\u003e\nWow and flutter 0.04% or less (W.R.M.S)\u003cbr\u003e \nPower source 230v (50 Hz)\u003cbr\u003e \nPower consumption 38w \u003cbr\u003e\nDimensions (WxHxD) 492 x 140 (up to top face of platter), 195 (with dust cover mounted) x 407mm \n","brand":"Luxman","offers":[{"title":"Default Title","offer_id":57412365025612,"sku":"LUXMANPD171AL","price":3833.33,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Luxman-PD-171AL-with-lid.jpg?v=1777535060"},{"product_id":"pro-ject-debut-carbon-phono-usb-turntable","title":"Pro-Ject Debut Carbon Phono USB Turntable","description":"At the beginning of 2012, the new Debut Carbon expands on the Debut III in a variety of ways; namely the inclusion of an 8.6\" carbon fibre tonearm, 12\" platter and rear-mounted junction box. The new motor isolation system also utilises a wholly unique rubber compound developed exclusively by Ortofon A\/S to offer dramatically reduced resonance transference from the high-quality 230V motor the turntable employs.\nThis incarnation of the award winning Debut Carbon comes with an integrated phono stage allowing you to plug it straight in to an amplifier or set of active speakers. The Debut Carbon Phono USB also comes with a USB output so you can record all your vinyl to your computer.\u003cbr\u003e\u003cbr\u003e\n\nThe Debut Carbon Phono USB is available in three stylish, high-gloss colours.\u003cbr\u003e\u003cbr\u003e\n\n\n\nKey Features:\u003cbr\u003e\n•8.6\" one-piece carbon fibre tonearm, adding stiffness and reducing resonance around the pick-up cartridge (rarely found on budget turntables, due to high production costs).\u003cbr\u003e\n•High-quality counterweight - helping further reduce unwanted resonance.\u003cbr\u003e\n•Two isolation 'feet' made especially by Ortofon A\/S, used to decouple the motor from the plinth.\u003cbr\u003e\n•New DC power supply for speed stability \u003cbr\u003e\n•Integrated Phono MM preamplifier - No need for a phono stage\u003cbr\u003e\n•USB output to record vinyl to PC or MAC\u003cbr\u003e \n•Factory-fitted Ortofon 2m Red.\u003cbr\u003e\n•3 gloss-coloured finishes available.\u003cbr\u003e\n•Lid included\u003cbr\u003e\u003cbr\u003e\n\nTechnical Data:\u003cbr\u003e\n\n\nSpeed: 33,45 RPM (Manual Speed Change) \u003cbr\u003e \nDrive Principle: Belt Drive \u003cbr\u003e\nPlatter: 300mm Metal With Felt Mat \u003cbr\u003e\nMain Bearing: Stainless Steel\u003cbr\u003e \nWow \u0026amp; Flutter: +\/- 0.10%  \u003cbr\u003e\nSpeed Drift: +\/- 0.80%  \u003cbr\u003e\nSignal to Noise: - 68dB  \u003cbr\u003e\nPre-Fitted Cartridge:  Ortofon 2M Red  \u003cbr\u003e\nTonearm: 8.6\" Carbon Fibre\u003cbr\u003e \nEffective Arm Length: 218.5mm \u003cbr\u003e\nEffective Arm Mass: 6.0g  \u003cbr\u003e\nOverhang: 18.5mm \u003cbr\u003e\nTracking Force: 10-30mN  \u003cbr\u003e\nIncluded Accessories: RCA Cable,\n Lid, \n USB Cable,\n Felt Mat\u003cbr\u003e \nDimensions (WxHxD): 415 x 118 x 320mm - Lid Closed \u003cbr\u003e\nWeight: 6kg net ","brand":"Pro-Ject","offers":[{"title":"Black","offer_id":57412600922444,"sku":"PROJECTDEBCARBPHONOUSB-B","price":332.5,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":57422614921548,"sku":"PROJECTDEBCARBPHONOUSB-R","price":332.5,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":57422614954316,"sku":"PROJECTDEBCARBPHONOUSB-W","price":332.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Debut-Carbon-Phono-USB-Black.jpg?v=1777535653"},{"product_id":"pro-ject-rpm-9-carbon-turntable","title":"Pro-Ject RPM 9 Carbon Turntable","description":"After an extensive period of research, development and testing the RPM 9 Carbon from Pro-Ject Audio Systems is now here! It features an extra heavy mass loaded chassis which is decoupled from its surface using magnetic feet. The polished 7.2kg acoustically inert aluminium platter has TPE damping, a vinyl top and inverted ceramic main bearing delivering absolutely stable speeds along with extra low rumble.\u003cbr\u003e\u003cbr\u003e\n\nTo further enhance the RPM 9 Carbon the extra heavy outboard motor also consists of a precise motor control allowing for easy switching between 33 and 45 RPM. \u003cbr\u003e\u003cbr\u003e\n\nAll of this partnered with Pro-Ject’s no compromise 9cc Evolution tonearm ensures perfect tracking and pure sound quality even with the most demanding of cartridges.\u003cbr\u003e\u003cbr\u003e\n\nThe RPM 9 Carbon is delivered with a 5P Connect it Phono CC cable with RCA plugs (An XLR option is also available to special order).\u003cbr\u003e\u003cbr\u003e\n\nPlease note: You can add the flagship Ortofon Quintet Black to this model (Normally not supplied with a cartridge) saving £249 off the cartridge price. Alternatively If you're looking for a recommendation, please give us a call to discuss your options.\u003cbr\u003e\u003cbr\u003e\n\n\nKey Features:-\u003cbr\u003e\n•Advanced sandwich construction of plinth with combination of MDF, carbon fibre and steel pellets \u003cbr\u003e\n•Plinth manufactured with thermo treatment\u003cbr\u003e \n•Mass loaded subchassis design with magnetic feet\u003cbr\u003e \n•Inverted main bearing with ceramic ball\/plate \u003cbr\u003e\n•7.2kg acoustically inert aluminium platter with TPE damping and vinyl mat on the top \u003cbr\u003e\n•DC power supply with AC motor \u003cbr\u003e\n•Precise DC driven AC generator (Speed Box) built-in \u003cbr\u003e\n•Electronic speed control with 33\/45 rpm switching \u003cbr\u003e\n•Outboard motor construction with massive steel base \u003cbr\u003e\n•Pre-mounted 9“ tonearm 9cc Evolution\u003cbr\u003e\u003cbr\u003e\n\nTechnical Specification:-\u003cbr\u003e\n\n\nNominal Speeds: 33 \/ 45 RPM\u003cbr\u003e\n \nMotor Completely Decoupled: Yes \u003cbr\u003e\nEffective Tonearm Length: 9\" (230mm)\u003cbr\u003e\n \nEffective Tonearm Mass: 8g \u003cbr\u003e\nOverhang: 18mm \u003cbr\u003e\nTracking Force: 10 - 35mN \u003cbr\u003e\nSpeed Drift: ± 0.10%\u003cbr\u003e\n \nWow \u0026amp; Flutter: ± 0.10%\u003cbr\u003e\n \nSignal to Noise: -75dB\u003cbr\u003e\n \nPlatter Weight \/ Diameter: 7.2kg \/ 300mm\u003cbr\u003e\n \nOutput Voltage: 15V \/ 800mA DC\u003cbr\u003e\n \nPower Consumption: 13W Max. \/ less than 0.3W Standby \u003cbr\u003e\nDimensions (W x H x D): 440 x 180 x 325mm\u003cbr\u003e\n \nWeight: 16.7kg \n","brand":"Pro-Ject","offers":[{"title":"Default Title","offer_id":57412602429772,"sku":"PROJECTRPM9CARBON","price":1582.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-RPM-9-Carbon.jpg?v=1777535695"},{"product_id":"pro-ject-rpm-10-carbon-turntable","title":"Pro-Ject RPM 10 Carbon Turntable","description":"For some years the legendary RPM series was one of the leading designs in analogue sound reproduction. The iconic RPM drop shaped base chassis resulted in a superior resonance characteristics compared to rectangular shaped chassis. Progressing from the foundations that the RPM 10 was build from, the years of research and development have benefited substantially in producing the RPM 10 Carbon.\u003cbr\u003e\u003cbr\u003e\n\nThe RPM 10 Carbon uses a new extra-heavy chassis. It features a special CNC-machined MDF base with resin coated steel pellets to form an extra-heavy and precise sandwich construction. A special complex heat treatment and carbon surface coating ensures superior low resonance levels. The mass-loaded chassis is effectively decoupled from its surface using magnetic feet.\u003cbr\u003e\u003cbr\u003e\n\nCombined with a new special polished aluminium platter with internal TPE damping and a vinyl layer on top, the inverted ceramic main bearing delivers an absolutely stable turntable speed with extra-low rumble. \u003cbr\u003e\u003cbr\u003e\n\nMotor\u003cbr\u003e\nThe new RPM heavy weight motor integrates an electronic DC\/AC power generator to clean up generated noise usually associated with AC power. To further enhance the RPM 10 Carbon the extra heavy outboard motor also consists of a precise motor control allowing for easy switching between 33 and 45 RPM\u003cbr\u003e\u003cbr\u003e\n\nTonearm\u003cbr\u003e\nThe highly acclaimed 10”cc Evolution tonearm is made from a one piece conical tube of carbon fibre with an inverted bearing design which offers ultimate rigidity and internal damping to minimise all unwanted vibrations. The 10”cc Evolution tonearm’s design makes it suitable for almost any high quality MM and MC cartridges. \n\u003cbr\u003e\u003cbr\u003e\nKey Features:-\u003cbr\u003e\n•Advanced sandwich construction of plinth with combination of MDF, carbon fibre and steel pellets\u003cbr\u003e\n•Plinth manufactured with thermo treatment\u003cbr\u003e\n•Mass loaded subchassis design with magnetic feet\u003cbr\u003e\n•14.5kg Ground it Carbon equipment base included\u003cbr\u003e\n•Inverted main bearing with ceramic ball\/plate\u003cbr\u003e\n•Extra-heavy acoustically inert aluminium platter with TPE damping and vinyl mat on the top\u003cbr\u003e\n•DC power supply with AC motor\u003cbr\u003e\n•Precise DC driven AC generator (Speed Box) built-in\u003cbr\u003e\n•Electronic speed control with 33\/45 rpm switching (78 rpm optional)\u003cbr\u003e\n•Outboard motor construction with massive steel base\u003cbr\u003e\n•Pre-mounted 10“ tonearm 10cc Evolution\u003cbr\u003e\u003cbr\u003e\n\nTechnical Specification:-\u003cbr\u003e\n\n\nNominal Speeds: 33 \/ 45 RPM\u003cbr\u003e\n \nMotor Completely Decoupled: Yes \u003cbr\u003e\nEffective Tonearm Length: 10\" (254mm)\u003cbr\u003e\n \nEffective Tonearm Mass: 8.5g \u003cbr\u003e\nOverhang: 16mm \u003cbr\u003e\nTracking Force: 10 - 35mN \u003cbr\u003e\nWow \u0026amp; Flutter: 33: ± 0.11%\u003cbr\u003e\n 45: ± 0.10%  \u003cbr\u003e\nSpeed Drift: ± 0.01%\u003cbr\u003e\n \nSignal to Noise: -75dB\u003cbr\u003e\n \nSupplied Counterweights:  5-7gr, 7-10gr, 9-11gr, 10-14gr  \u003cbr\u003e\nOutput Voltage: 15V \/ 1600mA DC\u003cbr\u003e\n \nPower Consumption: 15W Max. \/ less than 0.3W Standby \u003cbr\u003e\nDimensions (W x H x D): 480 x 210 x 330mm\u003cbr\u003e\n \nWeight: 22kg \u003cbr\u003e\nWeight Base:  14.5kg  \n","brand":"Pro-Ject","offers":[{"title":"Default Title","offer_id":57412602593612,"sku":"PROJECTRPM10CARBON","price":2499.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-RPM-10-Carbon.jpg?v=1777535700"},{"product_id":"pro-ject-essential-iii-digital-turntable","title":"Pro-Ject Essential III Digital Turntable","description":"Pro-Ject Essential III Digital \u003cbr\u003e \u003cbr\u003e \n\n• Belt drive with synchronous motor and silicone belt  \u003cbr\u003e \n\n• Optical output on back!  \u003cbr\u003e \n\n• Diamond cut aluminium drive pulley  \u003cbr\u003e \n\n• Chassis \u0026amp; platter made of resonance in-sensitive MDF  \u003cbr\u003e \n\n• Integrated DC-powered motor control  \n\nminimizes motor vibration and guarantees speed stability \u003cbr\u003e  \n\n• Low tolerance platter bearing with strainless steel spindle  \u003cbr\u003e \n\n• 8,6” aluminium tonearm with sapphire bearings \u003cbr\u003e  \n\n• Ortofon OM10 cartridge pre-mounted  \u003cbr\u003e \n\n• High-quality semi-balanced Connect it E phono interconnect  \n\nwith gold-plated RCA connectors included \u003cbr\u003e  \n\n• Special decoupling feet \u003cbr\u003e  \n\n• Dust cover included  \u003cbr\u003e \n\n• High-gloss colour options: black, red, white \u003cbr\u003e \u003cbr\u003e  \n\nEssential III offers a variety of enhancements compared to its successful predecessor, such as a diamond-cut aluminum drive pulley, a resonance-optimized MDF main platter and MDF chassis. The refined, high-precision platter bearing has significantly lower tolerances than Essential II. Essential III is the audiophile entry turntable! The setup is very simple, the included Phono RCA cable, Connect it E, sounds far above its price range. Equipped with the high-quality pickup OM10 by the phonographic cartridge pioneer Ortofon, Essential III delivers lively, balanced and highly involving sound that will delight every vinyl lover.  \u003cbr\u003e \u003cbr\u003e \n\nTechnical Specifications:-\u003cbr\u003e \n\nSpeed 33, 45 (manual speed change)\u003cbr\u003e \nDrive principle belt drive\u003cbr\u003e \nWow and flutter 33: 0,70% 45: 0,60%v\nSpeed drift 33: 0,21% 45: 0,19%\u003cbr\u003e \nPlatter 300mm MDF\u003cbr\u003e \nMain platter bearing spindle High-quality stainless steel\u003cbr\u003e \nTonearm 8,6”, aluminium\u003cbr\u003e \nEffective arm length 218,5 mm\u003cbr\u003e \nOverhang 22,0mm\u003cbr\u003e \nEffective tonearmmass 8,0 gr\u003cbr\u003e \nSuitable for cartridge mass 3 - 5,5g\u003cbr\u003e \nTracking force 0 - 25mn (recommended for OM10 18mn)\u003cbr\u003e \nIncluded accessory power supply, dust cover\u003cbr\u003e \nPower consumption 4,5 watts max\u003cbr\u003e \nDimensions 420 x 112 x 330mm (WxHxD)\u003cbr\u003e \nWeight 5,0 kg net\n \n","brand":"Pro-Ject","offers":[{"title":"High Gloss White","offer_id":57412603117900,"sku":"PROJECTESSENTIALIIIDIG-W","price":315.83,"currency_code":"GBP","in_stock":true},{"title":"High Gloss Black","offer_id":57422616101196,"sku":"PROJECTESSENTIALIIIDIG-B","price":315.83,"currency_code":"GBP","in_stock":true},{"title":"High Gloss Red","offer_id":57422616133964,"sku":"PROJECTESSIIIDIG-RED","price":315.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Essential-III-Digital-White.jpg?v=1777535709"},{"product_id":"pro-ject-rpm-1-carbon-turntable","title":"Pro-Ject RPM 1 Carbon Turntable","description":"The latest edition to the RPM range of turntables follows on from where the hugely popular Genie 3 left off. Utilising a range of innovative improvements over its predecessor, the RPM 1 Carbon stands out from the crowd with its stunning design, impeccable sound and affordable price. \u003cbr\u003e\u003cbr\u003e\n\nThe new RPM 1 Carbon design has been upgraded to significantly reduce resonance across the turntable. While maintaining the instantly recognisable shape, this turntable boasts improvements in the tonearm, bearing, and motor.\u003cbr\u003e\u003cbr\u003e\n\nThe brand new tonearm is a carbon fibre\/aluminium resin construct, made using special heat and pressure treatments. The result of this new design is a tonearm that is more solid and anti-resonant than ever before at this price, while maintaining a light weight. The arm is finished off with a pre-fitted Ortofon 2m Red cartridge and a new magnetic anti-skate mechanism. The improved counterweight also utilises TPE damping in the form of an anti-resonant ring around the fixing point.\u003cbr\u003e\u003cbr\u003e\n\nThe completely decoupled motor is based upon the same design as the Xpression Carbon, powered by an AC generator that's connected to the new DC power supply. The inverted main bearing now utilises a ceramic ball, offering a more fluid and consistent platter rotation than ever before.\u003cbr\u003e\u003cbr\u003e\n\nAvailable in Red, White or Black high gloss finishes, the RPM 1 Carbon is a turntable package that offers truly phenomenal value for money.\u003cbr\u003e\u003cbr\u003e\n\n\nKey Features:-\u003cbr\u003e\n•Precision belt drive using synchronous motor\u003cbr\u003e\n•Ultra-precision DC-driven AC generator motor power\u003cbr\u003e\n•Inverted platter bearing with ceramic ball\u003cbr\u003e\n•Platter made from MDF using felt mat\u003cbr\u003e\n•8,6” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments\u003cbr\u003e\n•Magnetic anti-skating\u003cbr\u003e\n•Counterweight with TPE damping\u003cbr\u003e\n•Pre-fitted Ortofon 2M Red cartridge\u003cbr\u003e\n•3 high-gloss colours (black, red, white)\u003cbr\u003e\n•Lid available as optional extra\u003cbr\u003e\u003cbr\u003e\n\nTechnical Specification:-\u003cbr\u003e\n\n\nPre-Fitted Cartridge: Ortofon 2M Red\u003cbr\u003e\n \nNominal Speeds: 33 \/ 45 RPM\u003cbr\u003e\n \nDust Cover: No (Optional Extra)\u003cbr\u003e \nMotor Completely Decoupled: Yes\u003cbr\u003e \nRCA Phono Sockets: Yes \u003cbr\u003e\nS-Shaped Tonearm: Yes \u003cbr\u003e\nEffective Tonearm Length: 8.6 \" (218.5mm)\u003cbr\u003e\n \nEffective Tonearm Mass: 13.5g \u003cbr\u003e\nOverhang: 22mm \u003cbr\u003e\nTracking Force: 0 - 25mN \u003cbr\u003e\nSpeed Drift: ± 0.19%\u003cbr\u003e\n \nWow \u0026amp; Flutter: ± 0.13%\u003cbr\u003e\n \nSignal to Noise: -70dB\u003cbr\u003e\n \nPlatter Weight \/ Diameter: 1.6kg \/ 300mm\u003cbr\u003e\n \nPower Supply Type: Outboard PSU 110-240V, 50Hz\u003cbr\u003e\n \nOutput Voltage: 15V \/ 500mA DC\u003cbr\u003e\n \nPower Consumption: 5W Max. \/ Less than 0.5W Standby \u003cbr\u003e\nDimensions (W x H x D): 380 x 110 x 350mm\u003cbr\u003e\n \nWeight: 3.8kg \n","brand":"Pro-Ject","offers":[{"title":"High Gloss Red","offer_id":57412603347276,"sku":"PROJECTRPM1CARBON-R","price":324.17,"currency_code":"GBP","in_stock":true},{"title":"High Gloss Black","offer_id":57422616166732,"sku":"PROJECTRPM1CARBON-B","price":324.17,"currency_code":"GBP","in_stock":true},{"title":"High Gloss White","offer_id":57422616232268,"sku":"PROJECTRPM1CARBON-W","price":324.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-RPM-1-Carbon-Red.jpg?v=1777535714"},{"product_id":"pro-ject-xperience-2-pack-turntable","title":"Pro-Ject Xperience 2-Pack Turntable","description":"The highly acclaimed Pro-Ject Xperience turntable in the stylish acrylic finish, supplied with a Pro-Ject 9CC Evolution Carbon Fibre tonearm and Ortofon 2M Blue MM Phono Cartridge. A fantastic and highly-praised combination, suitable for a wide variety of listening styles.\u003cbr\u003e\u003cbr\u003e\n\nKey Features:-\u003cbr\u003e\n•Turntable package offering exceptional value for money\u003cbr\u003e\n•Pleasing acrylic design with audiophile technologies employed throughout\u003cbr\u003e\n•Rigid, one-piece carbon fibre tonearm\u003cbr\u003e\n•Pre-fitted Ortofon 2M Blue MM cartridge\u003cbr\u003e\u003cbr\u003e\n\nTechnical Specification:-\u003cbr\u003e\n\nNominal Speeds: 33 \/ 45 RPM \u003cbr\u003e\nDust Cover: Yes, Supplied \u003cbr\u003e\nRecord Clamp: Yes, Supplied \u003cbr\u003e\nAluminium Cones: Yes, Sorbothane-Damped \u003cbr\u003e\nRCA Phono Sockets: Yes, Gold-Plated \u003cbr\u003e\nSpeed Variance: ± 0.5%\u003cbr\u003e\u003cbr\u003e\n \nWow \u0026amp; Flutter: ± 0.08%\u003cbr\u003e\n \nSignal-to-Noise Ratio: -70dB\u003cbr\u003e\n \nPlatter Weight \/ Diameter: 2Kg \/ 300mm\u003cbr\u003e\n \nTonearm: Pro-Ject 9CC Evolution\u003cbr\u003e \nEffective Arm Length: 9\" (230mm)\u003cbr\u003e \nEffective Mass: 8.5g \u003cbr\u003e \nOverhang: 18mm \u003cbr\u003e\nHeadshell: 0.5\" (12,7mm) Standard\u003cbr\u003e\n \nSupplied Counterweight:\u003cbr\u003e \n\n For Cartridge Weights...\n 6 - 10g\u003cbr\u003e \nPre-Fitted Cartridge: Ortofon 2m Blue \u003cbr\u003e\nOutput Voltage: 0.5mV\u003cbr\u003e\n \nStylus Type:\u003cbr\u003e\n\n Nude Elliptical Diamond\u003cbr\u003e\n Aluminium Cantilever\u003cbr\u003e\n \nTracking Weight: 1.8g \/ 18mN (Recommended)\u003cbr\u003e\n \nPower Supply Type:\n\n Outboard PSU\n 220 - 240V, 50Hz Input \u003cbr\u003e\nOutput Voltage: 16V \/ 500mA AC \u003cbr\u003e\nPower Consumption: 2W \u003cbr\u003e\nDimensions:\n\n 460 x 390 x 460mm (Lid Open)\u003cbr\u003e\n 460 x 133 z 360mm (Lid Closed) \u003cbr\u003e\nWeight: 7.7Kg \n\n\n\n\n","brand":"Pro-Ject","offers":[{"title":"Default Title","offer_id":57412604232012,"sku":"PROJECTXPERIENCE2PACK","price":832.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Xperience-2-pack.jpg?v=1777535725"},{"product_id":"pro-ject-xtension-9-super-pack-turntable","title":"Pro-Ject Xtension 9 Super Pack Turntable","description":"Xtension 9 Super Pack\u003cbr\u003e\nThe Xtension 9 is an ideal solution for anyone who is looking for exceptional sound quality with a compact foot print. \u003cbr\u003e\n\nThe Xtension 9 incorporates all of Pro-Ject's 20 years experience in turntable design.\u003cbr\u003e\n\nChassis\u003cbr\u003e\nThe chassis is made from MDF which gives a high mass and is non-resonant. But in addition the turntable also uses magnetic feet, which decouple the main plinth from its base. The result of this combination is a merging of the influential 'mass loaded' and 'floating turntable' design principles. \u003cbr\u003e\u003cbr\u003e\n\nPlatter\u003cbr\u003e\nInstead of the old-standard adoption of pure metal for a main platter, Pro-Ject researched and uncovered a perfect alloy material, which has then be damped on the inner side with thermo plastic elastomers (TPE). Taking this base structure, they've then glued recycled Vinyl records to the top (which act as a perfect mat) and baked this 'sandwich' before precision balancing it. The Xtension 9 subsequently benefits from a wonderfully resonance-free, heavy platter, that runs ultra-silently on an inverted ceramic ball-bearing, with magnetic suspension. \u003cbr\u003e\u003cbr\u003e\n\nTonearm\u003cbr\u003e\nThe Xtension 9 comes pre-fitted with the Pro-Ject 9cc Evolution Tonearm. Constructed from carbon-fibre, the armtube is efficiently designed to lead parasitic vibrations away from the cartridge into the mounting board which guarantees the precise tracking of the record grooves by the needle and also facilitates fine adjustment of vertical and horizontal tracing.\u003cbr\u003e\u003cbr\u003e\n\nCartridge\u003cbr\u003e\nUsually worth £649, the Ortofon Quintet Black comes pre-fitted to the Xtension 9. Graced with a Nude Shibata diamond, the Quintet Black is considered one of the best stylus profiles available, mounted on a high-performance Boron cantilever. The Shibata’s slim, highly polished profile allows an exceedingly wide contact area to the walls of the groove and ensures detailed and pure reproduction through out the spectrum, including even the most high frequency groove details.\u003cbr\u003e\u003cbr\u003e\n\nFinally, the Xtension 9 is also supplied with a beautiful dustcover with adjustable hinges, and is available in three high-gloss lacquer finishes.\u003cbr\u003e\u003cbr\u003e\n\n\nKey Features:-\u003cbr\u003e\n•Heavy 16 kg belt drive turntable\u003cbr\u003e\n•Mass-loaded magnetic-floating subchassis\u003cbr\u003e\n•Precision balanced sandwich-platter\u003cbr\u003e\n•Pre-fitted Ortofon Quintet Black cartridge\u003cbr\u003e\n•Inverted ceramic ball bearing with magnetic support\u003cbr\u003e\n•Heavy weight record clamp\u003cbr\u003e\n•Heavy MDF chassis with high mass and low level resonance\u003cbr\u003e\n•Electronic speed control 33 \/ 45 rpm \u003cbr\u003e\n•Tonearm 9cc Evolution made from carbon fibre\u003cbr\u003e\n•Inverted tonearm bearings (ABEC 7 quality)\u003cbr\u003e\u003cbr\u003e \n\nTechnical Data:-\u003cbr\u003e\n\nSpeeds:\n 33 \/ 45 RPM\u003cbr\u003e\n \nAcrylic Dust Cover: Yes \u003cbr\u003e\nTonearm Cable Included: Pro-Ject Connect-It 5P-CC 1.23m \u003cbr\u003e\nAluminium Feet:\n\n Magnetically Supported\n TPE Damped \nT\/T Main Bearing Damping: Heavy-Weight Metal Block\u003cbr\u003e \nMaximum Speed Variance: ± 0.09%\u003cbr\u003e\n \nMaximum Wow \u0026amp; Flutter: ± 0.01%\u003cbr\u003e\n \nRumble: -71dB \u003cbr\u003e\nPlatter Weight \/ Diameter: 5.4kg \/ 300mm\u003cbr\u003e\n \nEffective Arm Length \/ Overhang: 230mm \/ 18mm\u003cbr\u003e\n \nEffective Tonearm Mass: 8.5g \u003cbr\u003e\nTracking Force Range: 0 - 25mN\u003cbr\u003e\n \nCartridge Weight Range:\n\n 4 - 14g\n (4 Different Counterweights)\u003cbr\u003e\n \nExternal Power Supply:\n\n 220 - 240V \/ 50Hz Supply\n 15V \/ 1600mA DC\u003cbr\u003e\n \nPower Consumption:  4W (Max.)\/ Less than 1W Standby \u003cbr\u003e \nDimensions (W x H x D):\n 465 x 185 x 350\u003cbr\u003e\n \nWeight: 16kg \n","brand":"Pro-Ject","offers":[{"title":"High Gloss White","offer_id":57412604428620,"sku":"PROJECTXTENSION9SUPERPACK-W","price":2165.83,"currency_code":"GBP","in_stock":true},{"title":"High Gloss Red","offer_id":57422616494412,"sku":"PROJECTXTENSION9SUPERPACK-R","price":2165.83,"currency_code":"GBP","in_stock":true},{"title":"High Gloss Black","offer_id":57422616559948,"sku":"PROJECTXTENSION9SUPERPACK-B","price":2165.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Xtension-9-super-pack-white.jpg?v=1777535733"},{"product_id":"pro-ject-xtension-10-turntable","title":"Pro-Ject Xtension 10 Turntable","description":"The Xtension 10 is an ideal solution for anyone who is looking for the exceptional sound quality of the standard Xtension in a more compact size and at a more appealing price.\u003cbr\u003e\u003cbr\u003e\n\nThe Xtension 10 incorporates all of Pro-Ject's 20 years experience in turntable design. \u003cbr\u003e\u003cbr\u003e\n\nChassis\u003cbr\u003e\nThe chassis is made from MDF filled with metal sand, which gives a high mass and is non-resonant. But in addition the turntable also uses magnetic feet, which decouple the main plinth from its base. The result of this combination is a merging of the influential 'mass loaded' and 'floating turntable' design principles. \u003cbr\u003e\u003cbr\u003e\n\nPlatter\u003cbr\u003e\nInstead of the old-standard adoption of pure metal for a main platter, Pro-Ject researched and uncovered a perfect alloy material, which has then be damped on the inner side with Sorbothane®. Taking this base structure, they've then glued recycled Vinyl records to the top (which act as a perfect mat) and baked this 'sandwich' before precision balancing it. The Xtension 10 subsequently benefits from a wonderfully resonance-free, heavy platter, that runs ultra-silently on an inverted ceramic ball-bearing, with magnetic suspension. \u003cbr\u003e\u003cbr\u003e\n\nTonearm\u003cbr\u003e\nThe base of the included Pro-Ject 10cc Evolution Tonearm also benefits from 'high-mass' technologies, and is isolated from the main board by a sheet of Sorbothane®. To use this tonearm with a wide range of top quality phono cartridges, from 4 to 14g, it comes with a set of 4 different Sorbothane®- damped counterweights. \u003cbr\u003e\u003cbr\u003e\n\nFinally, the Xtension 10 is also supplied with a beautiful dustcover with adjustable hinges, and is available in three high-gloss lacquer finishes.\u003cbr\u003e\u003cbr\u003e\n\n\nKey Features:-\u003cbr\u003e\n•Super-heavy 22 kg belt drive turntable\u003cbr\u003e\n•Mass-loaded magnetic-floating subchassis\u003cbr\u003e\n•Precision balanced sandwich-platter\u003cbr\u003e\n•Inverted ceramic ball bearing with magnetic support\u003cbr\u003e\n•Heavy weight record clamp\u003cbr\u003e\n•Extremely low level of natural resonance\u003cbr\u003e\n•Perfect decoupling through magnetic feet\u003cbr\u003e\n•Electronic speed control 33 \/ 45 \/ 78 rpm\u003cbr\u003e \n•Tonearm 10cc Evolution made from carbon fibre\u003cbr\u003e\n•Inverted tonearm bearings (ABEC 7 quality)\u003cbr\u003e \nPlease note: You can add the flagship Ortofon Cadenza Black to this model (Normally not supplied with a cartridge) saving £750 off the cartridge price. Alternatively If you're looking for a recommendation, please give us a call to discuss your options.\u003cbr\u003e\u003cbr\u003e\n\n\nTechnical Specification:-\u003cbr\u003e\n\nSpeeds:\n\n 33 \/ 45 \/ 78 RPM\n (Speed Box DS Built-In) \u003cbr\u003e\nAcrylic Dust Cover: Yes \u003cbr\u003e\nTonearm Cable Included: Pro-Ject Connect-It 5P-C \u003cbr\u003e\nAluminium Feet:\n\n Magnetically Supported\n Sorbothane Damped \u003cbr\u003e\nT\/T Main Bearing Damping: Heavy-Weight Metal Block \u003cbr\u003e\nMaximum Speed Variance: ± 0.08%\u003cbr\u003e\n \nMaximum Wow \u0026amp; Flutter: ± 0.01%\u003cbr\u003e\n \nRumble: -73dB\u003cbr\u003e \nPlatter Weight \/ Diameter: 5.7kg \/ 300mm\u003cbr\u003e\n \nEffective Arm Length \/ Overhang: 254mm \/ 16mm\u003cbr\u003e\n \nEffective Tonearm Mass: 8.5g \u003cbr\u003e\nTracking Force Range: 10 - 30mN\u003cbr\u003e\n \nCartridge Weight Range:\n\n 4 - 14g\n (4 Different Counterweights)\u003cbr\u003e\n \nExternal Power Supply:\n\n 220 - 240V \/ 50Hz Supply\n 15V \/ 1000mA DC\u003cbr\u003e\n \nDimensions (W x H x D):\n\n 480 x 235 x 400\n 480 x 495 x 535 (Lid Open)\u003cbr\u003e\n \nWeight: 22kg \n","brand":"Pro-Ject","offers":[{"title":"Black (no cartridge)","offer_id":57412604526924,"sku":"PROJECTXTENSION10-B","price":2707.5,"currency_code":"GBP","in_stock":true},{"title":"Mahogany (no cartridge)","offer_id":57422616658252,"sku":"PROJECTXTENSION10-M","price":2707.5,"currency_code":"GBP","in_stock":true},{"title":"Olive (no cartridge)","offer_id":57422616723788,"sku":"PROJECTXTENSION10-O","price":2707.5,"currency_code":"GBP","in_stock":true},{"title":"Eucalyptus","offer_id":57422616789324,"sku":"PROJECTXTENSION10-EUC","price":2707.5,"currency_code":"GBP","in_stock":true},{"title":"Palisander","offer_id":57422616822092,"sku":"PRO-JECTXTENSION10-PALIS","price":2707.5,"currency_code":"GBP","in_stock":true},{"title":"Walnut","offer_id":57422616887628,"sku":"PROJECTXTENSION10-WAL","price":2707.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Xtension-10-Black.jpg?v=1777535737"},{"product_id":"pro-ject-signature-10-turntable","title":"Pro-Ject Signature 10 Turntable","description":"The Signature 10 is a true high-end turntable designed by Pro-Ject Audio Systems. The cousin of Pro-Jects flagship Signature turntable, the Signature 10 uses a mass loaded magnetic floating subchassis, perfect for reducing resonance and noise.\u003cbr\u003e\u003cbr\u003e\n\nMagnetic feet decoupled from the chassis surface, Sorbothane 'pillows' and a floating-magnetic platter essentially guarantee a silent-running turntable. The Signature 10 spins via a heavy belt drive designed to keep exceptional timing and quality.\u003cbr\u003e\u003cbr\u003e\n\nAn inbuilt speed control allows for simple speed changes between 33 1\/3 RPM and 45RPM at a push of a button.The single-pivot 10” precision tonearm is a unique and genuine design by Pro-Ject. With its wide range of adjustment possibilities and the choice of adequate counterweights, nearly all cartridges can be mounted. \u003cbr\u003e\u003cbr\u003e\n\n\nKey Features:-\u003cbr\u003e\n•Mass loaded belt drive subchassis design\u003cbr\u003e\n•Magnetically decoupled main platter\u003cbr\u003e\n•Resonance optimised alloy with built-in TPE damping\u003cbr\u003e\n•Inverted main bearing with ceramic ball\u003cbr\u003e\n•Chassis with magnetic decoupling\u003cbr\u003e\n•Electronic speed control\u003cbr\u003e\n•10” Single-pivot precision tonearm \u003cbr\u003e\n•High gloss metal surface\u003cbr\u003e\n\nTechnical Specifications:-\u003cbr\u003e\n\n\nSpeed: 33, 45 RPM (Electronic Speed Change) \u003cbr\u003e\nMotor Control System:  Precision Generator \u003cbr\u003e \nPlatter:  10.40kg TPE Damped\u003cbr\u003e  \nMain Bearing:  Ceramic (Ball\/Plate), Magnetically Decoupled \u003cbr\u003e \nTonearm:  10\" Single Pivot\u003cbr\u003e  \nEffective Arm Length\/Overhang:  254.8mm\/16mm \u003cbr\u003e \nEffective Arm Mass:  15.5g \u003cbr\u003e \nRCA Connectors: Gold-Plated \u003cbr\u003e\n \nPower Supply: 16V DC 1600mA \u003cbr\u003e\nStandby:  Less than 1 Watt \u003cbr\u003e \nDimensions:  475 x 350 x 188mm \u003cbr\u003e\nWeight:  22.5kg (Net)  \n","brand":"Pro-Ject","offers":[{"title":"Mahogany","offer_id":57412605411660,"sku":"PROJECTSIGNATURE10-M","price":3541.67,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":57422617018700,"sku":"PROJECTSIGNATURE10-B","price":3541.67,"currency_code":"GBP","in_stock":true},{"title":"Olive","offer_id":57422617084236,"sku":"PROJECTSIGNATURE10-O","price":3541.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Pro-Ject-Signature-10-Mahogany.jpg?v=1777535742"}],"url":"https:\/\/www.stoneaudio.co.uk\/collections\/turntables.oembed?page=3","provider":"Stone Audio","version":"1.0","type":"link"}