{"product_id":"aesthetix-aesthetix-saturn-eclipse-series-rhea-eclipse-phono-stage","title":"Aesthetix Saturn Eclipse Series:  Rhea Eclipse Phono Stage","description":"RHEA ECLIPSE\u003cbr\u003e\u003cbr\u003e\r\n\r\nFirst phase: Internal changes to the Rhea start with .22uF \/ 600v Stealth coupling capacitors used between the second and third gain stages, and the third gain stage and output stage. Eight total of these exotic capacitors are used. \u003cbr\u003e\u003cbr\u003e\r\n\r\nThere are four 2uF \/ 400v coupling capacitors used in each channel of the output stage of the Rhea. In the Eclipse version, these are replaced with Stealth copper foil 4uF\/400v, improving low frequency response. This capacitor is also used between the first and second gain stages. \u003cbr\u003e\u003cbr\u003e\r\n\r\nSecond phase: High frequency tuning capacitors are installed and hand-adjusted to tailor the frequency response to a tight .1dB standard (as also found on our Signature version). \u003cbr\u003e\u003cbr\u003e\r\n\r\nThird phase: The high voltage transformer, heater transformer and high voltage choke are all re-installed on isolation mounts. Harmonic Resolutions Systems' Nimbus Couplers specially made for Aesthetix replace the four rubber feet of standard units (as also found on our Signature version). The new power supply is installed with enhanced ventilation. Additional damping material is added to key chassis points. \u003cbr\u003e\u003cbr\u003e\r\n\r\nFourth phase: A single point ground system is used to ground the transformer cases as they are no longer electrically grounded to the chassis via physical contact due to their isolation mounts. All Eclipse Rhea, Calypso and Janus units receive a new power supply, which has been refined by improved trace routing to further reduce extraneous noise. \u003cbr\u003e\u003cbr\u003e\r\n\r\n\r\nThe above details are in addition to the standard Saturn Rhea specifications (see below)\u003cbr\u003e\u003cbr\u003e\r\n\r\nRHEA PHONO STAGE\u003cbr\u003e\u003cbr\u003e\r\n\r\nRhea is an all-tube phono stage, suitable for moving coil and moving magnet cartridges. It offers high maximum gain at 75 dB, making it ideal for low output cartridges. Rhea broke new ground as the first phono stage with 3 phono inputs, the first with gain and loading settings stored in memory for every input, and the first with full remote control adjustability. Dual-mono audio boards provide superb channel separation and soundstaging. A cartridge demagnetizer is a built-in convenience that can also be operated by remote control. The all-aluminum chassis is designed for rigidity and acoustic inertness, the brushed anodized panels are beautiful too. Rhea has enjoyed worldwide acclaim for its sound quality, build quality, flexibility and ease of use.\u003cbr\u003e\u003cbr\u003e\r\n•Three RCA inputs.\u003cbr\u003e\r\n•Each input has its own gain and loading setting that is saved even when in standby mode or the unit is turned off.\u003cbr\u003e\r\n•Zero feedback.\u003cbr\u003e\r\n•40-75dB gain maximum, selectable via front panel or remote control.\u003cbr\u003e\r\n•9 MC loading settings: 75-47,000 ohms, selectable via front panel or remote control.\u003cbr\u003e\r\n•Remote control of gain, loading, input switching, mute, and demagnetizer.\u003cbr\u003e\r\n•Built-in MC cartridge demagnetizer.\u003cbr\u003e\r\n•Two sets of XLR and two sets of RCA outputs per channel.\u003cbr\u003e\r\n•All tube amplification and output (10 tubes total).\u003cbr\u003e\r\n•Full function remote included.\u003cbr\u003e\r\n•Available in black or silver faceplate.\u003cbr\u003e\u003cbr\u003e\r\n\r\nRhea is available in three versions: Standard, Signature and Eclipse.\u003cbr\u003e\u003cbr\u003e\r\n\r\nThe standard version uses high-grade Rel-Cap polypropylene coupling capacitors. The Signature version uses exotic and expensive coupling capacitors and other critical parts to bring the performance to a higher level.\u003cbr\u003e\u003cbr\u003e\r\n\r\nAll versions of Rhea can be upgraded by an Aesthetix factory trained UK approved Aesthetix Service Centre.\u003cbr\u003e\u003cbr\u003e\r\n\r\nTECHNICAL SPECIFICATIONS:-\u003cbr\u003e\u003cbr\u003e\r\n\r\nInputs: 3 discrete phono inputs with RCA (SE) \u003cbr\u003e\r\nGain settings (selectable for each input): 8 total; 75, 68, 62, 56, 50, 44, 38 dB, and off\u003cbr\u003e\r\nLoad settings (selectable for each input): 9 total: 47 K ohms, 10K, 5K, 2.5K, 1K, 500 ohms, 250, 125, and 75 ohms\u003cbr\u003e\r\nOutputs: 2 RCA (SE) and 2 XLR (balanced)\u003cbr\u003e\r\nOutput impedence: 1K ohms RCA (SE), 600 ohms XLR (balanced)\u003cbr\u003e\r\nFront panel controls: phono input, mute, gain, loading, demagnetizer, and standby\u003cbr\u003e\r\nRemote controls: phono input, mute, gain, loading, demagnetizer, and standby\u003cbr\u003e\r\nFrequency response: +- 0.25 dB, 20 Hz - 20 KHz\u003cbr\u003e\r\nSignal to noise: measured at 70 dB minimum A-weighted (ref 1 mv input, 75 dB gain setting)\u003cbr\u003e\r\nRecommended load: 10 k ohms or greater\u003cbr\u003e\r\nTubes (each channel): V1 \u0026amp; V2 (12AX7LP-factory graded low noise), V3 \u0026amp; V4 (12AX7 or equivalent) and V5 (6922)\u003cbr\u003e\r\nPower consumption: 20 watts standby, 100 watts active\u003cbr\u003e\r\nPhysical dimensions: 4 3\/8\" high, 17 7\/8\" wide, 18\" deep including jacks\u003cbr\u003e\r\nShipping weight: 40 lbs. ","brand":"Aesthetix","offers":[{"title":"Aesthetix Saturn Eclipse Series:  Rhea Eclipse - Silver Faceplate","offer_id":57851275182412,"sku":"AESTHRHEAECLIPSE-SF","price":12458.33,"currency_code":"GBP","in_stock":true},{"title":"Aesthetix Saturn Eclipse Series:  Rhea Eclipse - Black Faceplate","offer_id":57851275215180,"sku":"AESTHRHEAECLIPSE-BF","price":12458.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Screen-Shot-2018-07-08-at-13.32.47.jpg?v=1781883271","url":"https:\/\/www.stoneaudio.co.uk\/products\/aesthetix-aesthetix-saturn-eclipse-series-rhea-eclipse-phono-stage","provider":"Stone Audio","version":"1.0","type":"link"}