{"product_id":"audio-technica-at-lp3-atlp3-turntable","title":"Audio-technica AT-LP3 (ATLP3) Turntable","description":"AT-LP3\u003cbr\u003e\u003cbr\u003e\n\nAdvanced Fully-Automatic Belt-Drive Turntable\u003cbr\u003e\u003cbr\u003e\n\nA revolution in automation, the LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33⅓ \u0026amp; 45 RPM records with a pre-mounted AT91R Dual Moving Magnet phono cartridge whilst the tonearm’s removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP3 represents the next level for vinyl lovers.\u003cbr\u003e\u003cbr\u003e\n•Fully automatic belt-drive turntable operation with two speeds: 33-1\/3, 45 RPM\u003cbr\u003e\n•Balanced straight tonearm with hydraulically damped lift control and lockable rest\u003cbr\u003e\n•Built-in switchable phono\/line pre-amplifier with attached dual RCA output cable\u003cbr\u003e\n•Switchable modes for moving magnet and moving coil cartridges\u003cbr\u003e\n•AT91R Dual Moving Magnet™ phono cartridge and AT-HS3 universal headshell\u003cbr\u003e\n•Anti-resonance, die-cast aluminium platter with 4.5 mm thick rubber mat\u003cbr\u003e\n•Damped base construction for reduced low-frequency feedback colouration\u003cbr\u003e\u003cbr\u003e\n\nMm \/ Mc Cartridge Selector Switch\u003cbr\u003e\n\nSwitchable MM\/MC mode allows the listener to use both Moving Magnet and Moving Coil cartridges on their LP3, allowing for greater sonic customisation – a unique feature not found on most turntables with a built-in phono preamplifier.\u003cbr\u003e\u003cbr\u003e\n\n\nAT91R Dual Moving Magnet Cartridge\u003cbr\u003e\n\nSpecially designed for the LP3, the AT91R Dual Moving Magnet™ phono cartridge incorporates an aluminium cantilever for higher-rigidity and improved pick-up of subtle details.\u003cbr\u003e\u003cbr\u003e\n\n \nUniversal Headshell\u003cbr\u003e\n\nRemovable universal AT-HS3 headshell allows users to upgrade their cartridge to further enhance their sound. Suitable for 1\/2\" mount cartridges and 4-pin turntable arms.\u003cbr\u003e\u003cbr\u003e\n\n \nBalanced Tonearm\u003cbr\u003e\n\nIncorporating a hydraulically damped lift control and lockable rest, the LP3’s straight balanced tonearm includes a radial ball bearing for horizontal movement and pivot bearings vertical movement.\u003cbr\u003e\u003cbr\u003e\n\n \n4.5mm Platter Mat\u003cbr\u003e\n\nReducing unwanted vibration and for stable play, the LP3 includes a 4.5mm thick rubber platter mat.\u003cbr\u003e\u003cbr\u003e\n\nTechnical Specifications:-\u003cbr\u003e\u003cbr\u003e\n\nTurntable:\u003cbr\u003e\n\n\nType Fully Automatic, Belt-Drive \u003cbr\u003e\nMotor DC motor \u003cbr\u003e\u003cbr\u003e\nSpeeds 33-1\/3 RPM, 45 RPM \nTurntable Platter Die-cast aluminium \u003cbr\u003e\nWow and Flutter Less than 0.2% WRMS (33 1\/3 RPM) at3kHz \u003cbr\u003e\nSignal-to-Noise Ratio \u0026gt; 60 dB \u003cbr\u003e\nOutput Level “PHONO” (MM) 3.5mV nominal at 1kHz, 5cm\/sec \u003cbr\u003e\n“LINE” (MC) 220mV nominal at 1kHz, 5cm\/sec  \u003cbr\u003e\nPhono Pre-Amp Gain 36dB nominal, RIAA equalised\u003cbr\u003e\n 56dB nominal, RIAA equalised \u003cbr\u003e \nPower Supply Requirements 220 to 240 V \/ 50, 60 Hz \u003cbr\u003e\nPower Consumption 2W \u003cbr\u003e\nDimensions 435 mm ×353 mm×128 mm (W×D×H) \u003cbr\u003e\nWeight 5.2kg \u003cbr\u003e\nAccessories Included Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable \u003cbr\u003e\u003cbr\u003e\n\n\nCartridge \u0026amp; Stylus:\u003cbr\u003e\n\n\nModel AT91R\u003cbr\u003e \nType VM Dual Magnet \u003cbr\u003e\nOutput Voltage 3.5mV (mV at 1kHz, 5 cm\/sec)\u003cbr\u003e \nVertical Tracking Force Range 1.5 to 2.5g (standard 2.0g)\u003cbr\u003e \nStylus Construction 0.6 mil bonded conical\u003cbr\u003e \nCantilever Aluminium pipe \u003cbr\u003e\nRecommended Load Impedance 47,000 ohms\u003cbr\u003e \nWeight 5.0g \u003cbr\u003e\u003cbr\u003e\n\n\nHeadshell:\u003cbr\u003e\n\n\nModel AT-HS3\u003cbr\u003e \nWeight 11.1g\u003cbr\u003e \nOverhang Adjustment 8mm \u003cbr\u003e\u003cbr\u003e\n\n\nTone arm:\n\n\nType Static balanced straight shaped with soft damping control\u003cbr\u003e \nEffective Length 221.5mm \u003cbr\u003e\nOverhang 19mm \u003cbr\u003e\nMaximum Tracking Error Angle Less than 3° \u003cbr\u003e\nStylus Pressure Adjustment Range 1 to 4g \u003cbr\u003e\nApplicable Cartridge Weight 14.5 to 20g \u003cbr\u003e\nAnti-skating Range 0 - 3 g \n\n\n","brand":"Audio-technica","offers":[{"title":"Black","offer_id":57413377458508,"sku":"AUDIOTECHATLP3-B","price":216.66,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":57423005253964,"sku":"ATECHATLP3-W","price":216.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Audio-technica-AT-LP3.jpg?v=1777543100","url":"https:\/\/www.stoneaudio.co.uk\/products\/audio-technica-at-lp3-atlp3-turntable","provider":"Stone Audio","version":"1.0","type":"link"}