{"product_id":"plinius-hautonga-integrated-amplifier","title":"Plinius Hautonga Integrated Amplifier","description":"Hautonga Integrated Amplifier\u003cbr\u003e\u003cbr\u003e\n\nThe versatile Hautonga is a perfectly equipped and well balanced piece that derives from preceding development in earlier Plinius integrated amplifiers. The aesthetic is the distinctive Plinius rounded front and it is available in silver or black linished anodised finish.\u003cbr\u003e\u003cbr\u003e\n\nThe rear panel has five line level RCA inputs with Phono RCA and a balanced XLR pair additional as standard. There is a Pre Out for those that only want to use the pre-amp stage and the Line Out connection for archiving or other ancillary equipment. Trigger in and out connectors provide for multi-room or home theatre simplicity.\u003cbr\u003e\u003cbr\u003e\n\nA full function remote lets you scroll through inputs from your seat. HT Bypass, standby mode for true low power operation that keeps the circuit active to deliver peak performance with minimal delay, mute and volume controls, display brightness adjustment and the full complement of CD player functions are all available from the remote.\u003cbr\u003e\u003cbr\u003e\n\nCareful attention has been paid to signals and circuit layout with short signal paths, optimal component placement and wiring specification working in harmony to extract exciting depth and detail from any musical recording.\u003cbr\u003e\u003cbr\u003e\n\nTaking integrated refinement to a new level, the Hautonga is an amplifier that has set new standards for performance, ease of use and reliability.\u003cbr\u003e\u003cbr\u003e\n\nFEATURES:-\u003cbr\u003e\u003cbr\u003e\n\nPhono Stage:\u003cbr\u003e\n A high quality phono stage comes fitted as standard. With two gain settings and fixed loading it allows for trouble free playback with a number of MM or MC cartridges.\u003cbr\u003e\u003cbr\u003e\n \nLine Out:\u003cbr\u003e\n The Line out provides a line level output, carrying the selected source signal. The Line Out allows for the signal to go on to recording equipment, headphone amplifiers or sub-woofer speakers.\u003cbr\u003e\u003cbr\u003e\n \nRemote Trigger Input and Output:\u003cbr\u003e\n Terminals for remote trigger connection allow a processor signal to bypass the preamplifier stage or instigate the power amp to come out of standby.\u003cbr\u003e\u003cbr\u003e\n \nGround Lift Switch:\u003cbr\u003e\n This allows for the signal ground to be isolated from the main chassis earth. This can assist in resolving unwanted ground loops or hum due to duplicate ground paths in some systems.\u003cbr\u003e\u003cbr\u003e\n \nWBT and Neutrik Connectors:\u003cbr\u003e\n High quality WBT RCA and Neutrik XLR input connectors are fitted along with WBT output speaker terminals to ensure low distortion interface between your cables and the amplifier.\u003cbr\u003e\u003cbr\u003e\n \nAuric Wiring:\u003cbr\u003e\n Audience AV supply the Auric OFC wire used in the input stage of the amplifier. The Auric was chosen for its high workability and natural sound.\u003cbr\u003e\u003cbr\u003e\n \nAudioQuest Wiring:\u003cbr\u003e\n AudioQuest X2 is used in the output stage of the amplifier as a high quality link to the speaker connectors.\u003cbr\u003e\u003cbr\u003e\n\nTECHNICAL SPECIFICATIONS:-\u003cbr\u003e\u003cbr\u003e\n\nPOWER:\u003cbr\u003e\n200 watts RMS per channel into 8 ohms.\u003cbr\u003e \n280 watts RMS per channel into 4 ohms. \u003cbr\u003e\nBoth channels driven from 20Hz to 20kHz at less than 0.2% total harmonic distortion\u003cbr\u003e\u003cbr\u003e\n\nFREQUENCY RESPONSE:\u003cbr\u003e\n20Hz to 20kHz ±0.2dB \u003cbr\u003e\n-3dB at 5Hz and -3dB at 70kHz\u003cbr\u003e\u003cbr\u003e\n\nDISTORTION:\u003cbr\u003e\nTypically \u0026lt; 0.05% THD at rated power \u003cbr\u003e\n0.2% THD and IM worst case prior to clipping\u003cbr\u003e\u003cbr\u003e\n\nCURRENT OUTPUT:\u003cbr\u003e\n40A short duration peak per channel\u003cbr\u003e \nFuse protected\u003cbr\u003e\u003cbr\u003e\n\nSLEW RATE:\u003cbr\u003e\n50V\/µs\u003cbr\u003e\u003cbr\u003e\n\nHUM \u0026amp; NOISE:\u003cbr\u003e\n90dB below rated output 20Hz to 20kHz unweighted\u003cbr\u003e\u003cbr\u003e\n\nINPUT IMPEDENCE:\u003cbr\u003e\n47k ohms all inputs \u003cbr\u003e\nPhono adjustable to 47k ohms, 470 ohms, \n100 ohms,47 ohms, 22 ohms\u003cbr\u003e\u003cbr\u003e\n\nRATED PRE OUT LEVEL:\u003cbr\u003e\n1.5V RMS into 47k ohms or higher\u003cbr\u003e\u003cbr\u003e\n\nPRE OUT SOURCE IMPEDENCE:\u003cbr\u003e\nTypically 1.5k ohms\u003cbr\u003e\u003cbr\u003e\n\nPRE OUT MINIMUM RECOMMENDED LOAD:\u003cbr\u003e\n47k ohms\u003cbr\u003e\u003cbr\u003e \n\nLINE OUT LEVEL:\u003cbr\u003e\n190mV at 200 ohms\u003cbr\u003e\u003cbr\u003e\n\nGAIN:\u003cbr\u003e\nLine inputs to speaker out: 40dB\u003cbr\u003e \nPhono Input To Pre-Out: 66dB on high gain, 60dB on low gain\u003cbr\u003e\u003cbr\u003e\n\nPOWER\/CURRENT CONSUMPTION:\u003cbr\u003e\n600W \u003cbr\u003e\n0.4A (92W) \u003cbr\u003e\nClass AB Idle 0.14A (32W) Standby\u003cbr\u003e\u003cbr\u003e\n\nDIMENSIONS:\u003cbr\u003e\nHeight: 120mm (4 3\/4\")\u003cbr\u003e\nWidth: 450mm (17 3\/4\")\u003cbr\u003e\nDepth: 400mm (15 3\/4\")\u003cbr\u003e\nWeight: 14kg (30lb)\n ","brand":"Plinius","offers":[{"title":"Silver","offer_id":57415095353676,"sku":"PLINIUSHAUTONGA-S","price":5166.67,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":57423837528396,"sku":"PLINIUSHAUTONGA-B","price":5166.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Plinius-Hautonga-black.jpg?v=1777553803","url":"https:\/\/www.stoneaudio.co.uk\/products\/plinius-hautonga-integrated-amplifier","provider":"Stone Audio","version":"1.0","type":"link"}