{"product_id":"ruckus-t710-wave-2-ac-outdoor-wireless-access-point","title":"Ruckus T710, WAVE 2 .ac Outdoor Wireless Access Point","description":"Ruckus T710, WAVE 2 .ac Outdoor Wireless Access Point, 4x4:4 Stream, Omnidirectional Beamflex+\u003cbr\u003e\u003cbr\u003e\n\nThe Ruckus T710 combines Ruckus patented technologies and best-in-class industrial grade design with next generation of 802.11ac features to deliver industry-leading Wi-Fi performance, reliability and coverage for challenging high density outdoor deployments. Featuring BeamFlex+ adaptive antenna technology, the T710 offers a substantial increase in performance and range by optimizing antenna coverage on a per client, per transmission basis. BeamFlex+ additionally mitigates co-channel interference by directing Wi-Fi signals where they are needed instead of towards neighboring access points. The T710’s BeamFlex+ adaptive antenna system is also equipped with dual polarization antennas, allowing the access point to adapt to the physical orientation of client devices and maximize uplink performance.\u003cbr\u003e\u003cbr\u003e\n\nFeatures:-\u003cbr\u003e\n802.11ac 802.11ac Wave 2 Multi-User MIMO (MU-MIMO)\u003cbr\u003e\n•Concurrent dual-band (5GHz\/2.4GHz) support\u003cbr\u003e\n•2,533Mbps maximum PHY rate (1733 Mbps in 5GHz; 800Mbps in 2.4GHz)\u003cbr\u003e\n•BeamFlex+ (PD-MRC) smart antenna, with support for 4,000+ unique antenna patterns enables up to 5dB of additional gain and up to 15dB of additional interference mitigation\u003cbr\u003e\n•802.11ac standard Tx Beamforming\u003cbr\u003e\n•Antenna options: omni-directional and 120x30 degrees sector\u003cbr\u003e\n•Unmatched Rx sensitivity down to -104dBm\u003cbr\u003e\n•Improved Maximum Ratio Combining (MRC) for best-in-class re - ceive sensitivity\u003cbr\u003e\n•Space Time Block Coding for increased handset performance\u003cbr\u003e\n•Low Density Parity Check (LDPC) for increased data throughput at all ranges\u003cbr\u003e\n•256-QAM support on 5GHz and 2.4GHz\u003cbr\u003e\n•Admission control\/load balancing*\u003cbr\u003e\n•Band balancing\u003cbr\u003e\n•Four software QoS queues per client station\u003cbr\u003e\n•Up to 16 BSSIDs per radio with unique QoS and security policies*\u003cbr\u003e\n•Backward compatible with legacy 802.11 clients\u003cbr\u003e\n•Dedicated dual band RF monitor enabling enhanced performance while providing Zero-Wait DFS capability\u003cbr\u003e\n•WPA-PSK (AES), 802.1X support for RADIUS and AD* INTERFACES\u003cbr\u003e\n•2 x 1GbE ports\u003cbr\u003e\u003cbr\u003e\n\nTechnical Specifications:-\u003cbr\u003e\u003cbr\u003e\n\n\nPOWER: \u003cbr\u003e\n•AC input: 100-250 Vac, 50\/60 Hz\u003cbr\u003e\n•PoE: 802.3at\u003cbr\u003e\u003cbr\u003e\n \nPHYSICAL SIZE: \u003cbr\u003e\n•31.7 cm (L). 24.1 cm (W). 9.5 cm (H)\u003cbr\u003e\u003cbr\u003e\n \nWEIGHT: •6.5lbs\u003cbr\u003e\u003cbr\u003e\n \nRF: \u003cbr\u003e\n• Adaptive antenna array: 4,000+ unique antenna patterns, polarization diversity\u003cbr\u003e\n• Maximum Transmit Power: 28 dBm on 2.4GHz; 28dBm on 5GHz\u003cbr\u003e\n• Physical antenna gain: Omni - 3 dBi (2.4 and 5GHz); Sector - 6dBi(2.4GHz), 8 dBi (5GHz)\u003cbr\u003e\n• BeamFlex SINR Tx gain: up to 6dB\u003cbr\u003e\n• BeamFlex SINR Rx gain: up to 3-5dB\u003cbr\u003e\n• Interference mitigation: up to 15dB\u003cbr\u003e\n• Minimum Rx sensitivity: -104dBm\u003cbr\u003e\u003cbr\u003e\n \nETHERNET PORTS: \u003cbr\u003e\n• 2 Ethernet ports, auto MDX, auto-sensing, 10\/100\/1000 Mbps, RJ-45\u003cbr\u003e\n• Power over Ethernet (802.3at) with Category 5\/5e\/6 cable\u003cbr\u003e\n• Power over Ethernet (802.3at) Output with Category 5\/5e\/6 cable\u003cbr\u003e\n• Link Aggregation (LACP)\u003cbr\u003e\n• SFP port to support fiber backhaul\u003cbr\u003e\u003cbr\u003e\n \nENVIRONMENTAL CONDITIONS:\u003cbr\u003e \n• Operating Temperature:-40°F (-40°C) to 149°F (65°C)\u003cbr\u003e\n• Operating Humidity: up to 95% non-condensing\u003cbr\u003e\u003cbr\u003e\n \nPOWER CONSUMPTION: \u003cbr\u003e\n• When PoE Out is not used\u003cbr\u003e\n• 5.5W (minimum)\u003cbr\u003e\n• 10.4W (typical)\u003cbr\u003e\n• 25W peak\u003cbr\u003e\u003cbr\u003e\n \nPERFORMANCE AND CAPACITY:-\u003cbr\u003e\u003cbr\u003e\n  \nPHY DATA RATES: \u003cbr\u003e\n•Up to 800Mbps (2.4GHz)\u003cbr\u003e\n•Up to 1733Mbps (5GHz)\u003cbr\u003e\u003cbr\u003e\n \nCONCURRENT STATIONS:\u003cbr\u003e \n•Up to 512:\u003cbr\u003e\u003cbr\u003e\n \nNUMBER OF SIMULTANEOUS VOIP CLIENTS: \u003cbr\u003e\n•Up to 30\u003cbr\u003e\u003cbr\u003e\n \nNETWORK ARCHITECTURE:- \u003cbr\u003e\u003cbr\u003e\nIP: \n• IPv4, IPv6, dual-stack\u003cbr\u003e\u003cbr\u003e\n \nVLANS: \u003cbr\u003e\n• 802.1Q (1 per BSSID or dynamic, per user based on RADIUS)\u003cbr\u003e\n• Port-based\u003cbr\u003e\u003cbr\u003e\n \n802.1X FOR WIRED PORTS: \u003cbr\u003e\n• Authenticator\u003cbr\u003e\n• Supplicant\u003cbr\u003e\u003cbr\u003e\n \nTUNNELING: \n• L2TP\u003cbr\u003e\u003cbr\u003e\n \nMULTIMEDIA AND QUALITY OF SERVICE:- \u003cbr\u003e\u003cbr\u003e\n8022.11E\/Wmm: •Supported\u003cbr\u003e\nSOFTWARE QUEUES: •Per WLAN priority (2), Per Traffic type (4). per client\u003cbr\u003e\nTRAFFIC CLASSIFICATION: •Automatic, heurisitcs and TOS based or VLAN-defined\u003cbr\u003e\nRATE LIMITING: •Dynamic per-user or per-WLAN\u003cbr\u003e\u003cbr\u003e\n \nMANAGEMENT:-  \u003cbr\u003e\u003cbr\u003e\nDEPLOYMENT OPTIONS: \u003cbr\u003e\n•Standalone (individually managed)\u003cbr\u003e\n•Cantrally managed\u003cbr\u003e\u003cbr\u003e\n\nWI-FI:-\u003cbr\u003e\u003cbr\u003e\n \nSTANDARDS: \n• IEEE 802.11a\/b\/g\/n\/ac\u003cbr\u003e\u003cbr\u003e\n \nSUPPORTED DATA RATES: \u003cbr\u003e\n• 802.11ac: 29.3Mbps – 1733 Mbps (80MHz)\u003cbr\u003e\n• 802.11n: 6.5Mbps – 216.7 Mbps(20MHz) 13.5 Mbps – 800Mbps (40MHz)\u003cbr\u003e\n• 802.11a: 54, 48, 36, 24, 18, 12, 9 and 6Mbps\u003cbr\u003e\n• 802.11b: 11, 5.5, 2 and 1Mbps\u003cbr\u003e\n• 802.11g: 54, 48, 36, 24, 18, 12, 9 and 6Mbps\u003cbr\u003e\u003cbr\u003e\n \nRADIO CHAINS\/ STREAMS: \n• 4x4:4\u003cbr\u003e\u003cbr\u003e\n \nMIMO: \n• SU-MIMO — Up to 4 streams\u003cbr\u003e\n• MU-MIMO — Up to 3 streams\u003cbr\u003e\u003cbr\u003e\n \nCHANNELISATION: \n• 20 MHz, 40 MHz, and\/or 80 MHz\u003cbr\u003e\u003cbr\u003e\n \nFREQUENCY BANDS: \u003cbr\u003e\n• IEEE 802.11ac: 5.15 – 5.85GHz\u003cbr\u003e\n• IEEE 802.11a\/n: 5.15 – 5.85GHz\u003cbr\u003e\n• IEEE 802.11b: 2.4 – 2.484GHz\u003cbr\u003e\u003cbr\u003e\n \nBSSIDS: \u003cbr\u003e\n• Up to 16 (2.4GHz)\u003cbr\u003e\n• Up to 16 (5GHz)\u003cbr\u003e\u003cbr\u003e\n \nPOWER SAVE: \n• Supported\u003cbr\u003e\u003cbr\u003e\n \nCERTIFICATIONS: \u003cbr\u003e\n• WEEE\/RoHS compliance\u003cbr\u003e\n• EN 60601-1-2 Medical\u003cbr\u003e\n• Wi-Fi Alliance certified\u003cbr\u003e\n• UL 2043 plenum rated\u003cbr\u003e\u003cbr\u003e\n \nSUBWAY AND RAILROAD CERTIFICATIONS: \u003cbr\u003e\n• EN50121-1 EMC\u003cbr\u003e\n• EN50121-4 Immunity\u003cbr\u003e\n• IEC 61373 Shock \u0026amp; Vibration\n \n\n \n\n\n\n\n\n\n\n\n\n\n\n\n","brand":"Ruckus","offers":[{"title":"Default Title","offer_id":57414447628620,"sku":"RUC-T710","price":2475.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Ruckus-RUC-T710.jpg?v=1777548967","url":"https:\/\/www.stoneaudio.co.uk\/products\/ruckus-t710-wave-2-ac-outdoor-wireless-access-point","provider":"Stone Audio","version":"1.0","type":"link"}