{"product_id":"trinnov-amplitude-8-8-channel-power-amplifier","title":"Trinnov Amplitude 8 - 8 Channel Power Amplifier","description":"The Amplitude8 power amplifier is designed to ensure that your loudspeakers will deliver the most spectacular performance in your luxury home theater.\u003cbr\u003e\u003cbr\u003e\n\nHuge power, dynamic and bass impact;\u003cbr\u003e\nunparalleled clarity, resolution and musicality;\u003cbr\u003e\n8 channels each with 225W into 8 ohms;\u003cbr\u003e\ndual 4-channel design with dual power supply and 2 independent inlets;\u003cbr\u003e\nHypex Ncore® class D amplifier technology used in the finest audiophile monoblocks;\u003cbr\u003e\nhigh-efficiency, quiet convection-cooled design.\u003cbr\u003e\u003cbr\u003e\n\nThe two linear power supplies based on heavy duty toroidal power transformers allow every module of the Amplitude8 to deliver 225W into 8 ohms, 375W into 4 ohms and 500W into 2 ohms.\u003cbr\u003e\nThese no-compromise specs allow for:\u003cbr\u003e\na huge dynamic range and bass impact only found in the best commercial theaters;\u003cbr\u003e\na powerful three-dimensional soundstage;\u003cbr\u003e\nthe most energetic climaxes and explosions.\u003cbr\u003e\u003cbr\u003e\n\nThe amplification stage of the Amplitude8 also features the industry’s lowest distortion and noise specifications, and its performance is frequency-independent.\u003cbr\u003e\nWhat does this actually mean for your movie experience?\u003cbr\u003e\n\n\nAudiophile-grade audio performance in your home theater;\u003cbr\u003e\nzero background noise during the most quiet scenes of the movie; \u003cbr\u003e\nthe finest sound quality and realism on music and movies alike, even at high loudness levels.\u003cbr\u003ev\n\nThe Amplitude8 integrates seamlessly with your Altitude32\nA\/V preamp, both visually and technically.\u003cbr\u003e\u003cbr\u003e\n\n\nThe Amplitude8’s input level perfectly matches the Altitude32’s output level, ensuring an optimal use of the dynamic range at the amplification stage;\u003cbr\u003e\nthe Altitude32’s outputs can easily be connected to the Amplitude8’s input via D-Sub or XLR cables; \u003cbr\u003e\nthe Amplitude8’s front panel was designed to match the Altitude32’s facade and will look magnificent in your home theater’s rack.\u003cbr\u003e\u003cbr\u003e \n\nTechnical Specifications:- \u003cbr\u003e\n\nAnalog Audio Inputs\u003cbr\u003e\n\n\nConnectors\n1 Balanced (XLR) per channel on each module.\u003cbr\u003e\n\nInput Impedance\n47 kOhms, each phase.\u003cbr\u003e \n\nInput sensitivity\n6.15V RMS balanced input (+18dBu) for 225W into 8 ohms. \u003cbr\u003e\n\nGain\n19.2dB. \u003cbr\u003e\n\nPolarity\nPin-2 = Positive, Pin-3 = Negative for Non-Inverting Output.\u003cbr\u003e\u003cbr\u003e \n\nAnalog Audio Outputs\u003cbr\u003e\u003cbr\u003e\n\n\nConnectors\nOne balanced output with 5-way binding posts per channel. \u003cbr\u003e\n\nModes\/Processes\u003cbr\u003e\nStandby: Amplifier is ready to be turned on via front panel switch or remote trigger.  \u003cbr\u003e\nOvercurrent, D.C., and\/or thermal protection: Amplifier will cycle.  \u003cbr\u003e\nCatastrophic D.C. or output stage failure: Amplifier will shut down \n\u003cbr\u003e\u003cbr\u003e\nPower Output\u003cbr\u003e\n8 ohms: 225W RMS per channel with less than 0.05% THD from 20 Hz to 20 kHz \u003cbr\u003e\n4 ohms: 375W RMS per channel with less than 0.05% THD from 20 Hz to 20 kHz\u003cbr\u003e \n2 ohms: 500W RMS per channel with less than 0.05% THD from 20 Hz to 20 kHz \u003cbr\u003e\u003cbr\u003e\n\nFrequency Response\n+-0.5dB from 0Hz to 20 kHz, load independent. \u003cbr\u003e\n\nDamping Factor\nGreater than 6000 at 100 Hz; Greater than 2000 at any frequency up to and including 20 kHz. \u003cbr\u003e\n\nSignal to Noise Ratio\n125dB referenced to rated output (A-Weighted). \u003cbr\u003e\n\nCrosstalk\n85 dB.\u003cbr\u003e\u003cbr\u003e \n\nMiscellaneous\u003cbr\u003e\n\n\nPower Requirements\n117V AC, 15A Slo BLo main fuse; 230V AC 8A Slo Blo main fuse; 50\/60 Hz \u003cbr\u003e\n\nPower Consumptions\nLess than 1W at Standby; less than 80W at idle; 1500W maximum by 2 when fully loaded \u003cbr\u003e\n\nTrigger Input\n5 to 12V DC; Steady State. \u003cbr\u003e\n\nDimensions\n(W x H x D) 17 5\/8 inches x 7 15\/16 inches x 19 3\/4 inches \n(W x H x D) 448 mm x 202mm x 502 mm \u003cbr\u003e\n\nWeight\nFully loaded: 98.5 lbs \/ 44.8 Kg; Boxed with accessories: 111 Lbs \/ 50.4 Kg \u003cbr\u003e\n\nMaximum Operating Temperature\nInternal: 176° F (80° C) \nRoom: 122° F (50° C) \n","brand":"Trinnov Audio","offers":[{"title":"Default Title","offer_id":57412880138572,"sku":"TRINNOVAMP8","price":10000.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/Trinnov-Audio-Amplitude-8.jpg?v=1777537788","url":"https:\/\/www.stoneaudio.co.uk\/products\/trinnov-amplitude-8-8-channel-power-amplifier","provider":"Stone Audio","version":"1.0","type":"link"}