{"product_id":"wyrestorm-tx-h2x-hdbt-txh2xhdbt","title":"WyreStorm TX-H2X-HDBT (TXH2XHDBT)","description":"TX-H2X-HDBT\u003cbr\u003e\u003cbr\u003e\n\nHDBaseT Input, HDBaseT™ Output and Mirrored HDMI Output with Audio Input, DSP Output and IR to zone (4K: 70m\/230ft | 1080p: 100m\/328ft)\u003cbr\u003e\u003cbr\u003e\n\nDe-centralize sources connected to the H2X matrix platform with this HDBaseT™ input \u0026amp; output card. Accepting 4K UHD transmissions from 70m\/230ft, this modular card allows source devices to be kept in-situ whilst making them part of the main distribution system.\u003cbr\u003e\u003cbr\u003e\n\nClass A HDBaseT™\u003cbr\u003e\nBoth the input and output side of this card offers HDBaseT™ 5-Play connectivity, passing AV, Control, Ethernet and PoH for both the RX and TX devices.\u003cbr\u003e\u003cbr\u003e\n\nThe WyreStorm Eco-system\u003cbr\u003e\nUsed in line with WyreStorm's range of HDBaseT™ devices, signals can be sent from single transmitters, switching transmitters or even presentation switchers to create a multi-layered switching environment.\u003cbr\u003e\u003cbr\u003e\n\nAUDIO DSP\u003cbr\u003e\nNo two rooms or even installations are the same. That’s why we’ve coupled to each audio zone output; a powerful audio DSP, which allows an integrator to have complete control over the audio configuration. Also, a 10-band equalizer, level trim and variable delay, which can be set per zone for a truly customized room-by-room balance.\u003cbr\u003e\u003cbr\u003e\n\n4K UHD WITH HDR OVER HDBaseT™\u003cbr\u003e\nMulti-zone transmission of HDR-10 content is nothing new to WyreStorm; we’ve been sending this high-bandwidth content, native \u0026amp; uncompressed over long distances since the introduction of our first H2 extender in 2015. The H2X is no different and with the TX-H2X-HDMI, sending pixel-perfect 4K UHD 4:2:0 10-bit @24Hz at distances up to 100m\/328ft.\u003cbr\u003e\u003cbr\u003e\n\nFEATURES:-\u003cbr\u003e\n•HDBT Input - Enables the direct connection of a remote source to the matrix via an HDBaseT™ Transmitter only at the source location, rather than an HDBaseT™ extender set previously required to distribute a remote signal over distance to a matrix. The matrix will then route the remote source signal as it does with any locally connected source. \u003cbr\u003e\n•HDBaseT™ Output- Transmitting Class A HDBaseT™ which includes video, audio, control and power up to 70m\/230ft of 4K and 100m\/328ft of 1080p \u003cbr\u003e\n•HDMI Output - Mirrored to HDBaseT to allow additional connection of a local display device, AVR or to extend with a hybrid active optical HDMI cable (HAOC)\u003cbr\u003e \n•Stereo Audio Output - Offering stereo audio breakout of a zone with a 3-pin phoenix connector for analog audio \u003cbr\u003e\n•S\/PDIF output supporting 5.1 audio content de-embedded from sources or ARC from connected zones \u003cbr\u003e\n•S\/PDIF Audio Input - Another way to inject digital audio to take advantage of the H2X platform’s powerful audio matrix and DSP. \u003cbr\u003e\n•IR RX - Allows control signals to be sent to the sink device.\u003cbr\u003e\u003cbr\u003e\n\nSpecifications:-\u003cbr\u003e\u003cbr\u003e\n\nAudio and Video\u003cbr\u003e\u003cbr\u003e\n\nInputs:\u003cbr\u003e\n 1x HDMI In19-pin type A\u003cbr\u003e\n 1x S\/PDIF In Coaxial Digital\u003cbr\u003e\n 1x HDBaseT™ 8-pin RJ-45 female \u003cbr\u003e\u003cbr\u003e\n \nOutputs:\u003cbr\u003e\n 1x HDBaseT™ 8-pin RJ-45 female\u003cbr\u003e\n 1x S\/PDIF Out Coaxial Digital\u003cbr\u003e\n 1x Audio Out 3pin Phoenix Connector\u003cbr\u003e\u003cbr\u003e \n \nOutputs Video Encoding:  HDBaseT™ Class A\u003cbr\u003e\nEncoding Data Rate:  9.2Gbps\u003cbr\u003e\nEnd to End Latency:  10μs (micro seconds)\u003cbr\u003e\nAudio Formats:   2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos \u003cbr\u003e\u003cbr\u003e\n \nCommunication and Control:-\n\u003cbr\u003e\nHDMI:  HDCP 2.2 | DVI-D supported with adapter (not included) \u003cbr\u003e \nHDBaseT™:  HDMI | HDCP 2.2 | 1-way PoH to Receiver | IR RX to Receiver \u003cbr\u003e \nIR:  1x IR RX 3.5mm (1\/8in) TRS Stereo | To Receiver over HDBaseT™\u003cbr\u003e  \nRS-232:  Matrix Control | Bidirectional over HDBaseT™ | Firmware Updates \u003cbr\u003e \nEthernet:  From Matrix - No Connection on card | Bidirectional over HDBaseT™ \u003cbr\u003e\nARC (Audio Return Channel):  Returns audio from displays built-in applications via ARC HDMI Input over HDBaseT™ (Requires ARC or SCL Receiver) \u003cbr\u003e\u003cbr\u003e\n\nPower:-\u003cbr\u003e\n\nPower Supply:   Internal to Matrix\u003cbr\u003e\nMax Power Consumption:   Matrix Dependent \u003cbr\u003e \nPoH:  48V 15.4W \u003cbr\u003e\u003cbr\u003e \n\nEnvironmental:-\u003cbr\u003e\n\nOperating Temperature:   Matrix Dependent\u003cbr\u003e\nStorageTemperature:   Matrix Dependent\u003cbr\u003e\nMaximum BTU:  Matrix Dependent\u003cbr\u003e\u003cbr\u003e\n \n\nRegulatory:\u003cbr\u003e\n\nSafety and Emission   Matrix Dependent  \n \n\n\n \n\n","brand":"WyreStorm","offers":[{"title":"Default Title","offer_id":57414329467212,"sku":"WYRESTORMTXH2XHDBT","price":831.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/6891\/2204\/files\/WyreStorm-TX-H2X-HDBT.jpg?v=1777548760","url":"https:\/\/www.stoneaudio.co.uk\/products\/wyrestorm-tx-h2x-hdbt-txh2xhdbt","provider":"Stone Audio","version":"1.0","type":"link"}