Established in 1969, Xantech LLC (www.xantech.com) designs and manufactures an extensive range of state of the art A/V distribution and control systems, and component products, many of which have become the de facto industry standards. Since 1969, over two million of these systems have been installed worldwide. The Xantech product line includes LCD Touchpanel Controllers, multi-zone, multi-source audio/video systems, multi-zone, multi-source pre-amplifiers, multi-channel audio amplifiers, infrared receivers, remote control switchers, interface modules, IR connecting blocks, IR emitters, volume controls and IR accessories. These products are the preffered choice of professional installers worldwide.
Page 2
( Displaying 10 of 23 Products )
|
|
Xantech HL85BK Universal Hidden Link Standard Range Kit Black
|
|
Control up to Four Audio/Video Components via Infrared (IR) Using this Shelf-Top IR Repeater System
•Use your IR remote on components behind closed doors or walls
•IR receiver has an attractive case for shelf-top locations
•IR receiver talk-back LED confirms commands
•IR receiver accepts IR commands from up to 30 feet away
With the Xantech HL85BK Designer Hidden Link IR Receiver Kit, there is no longer a need to leave entertainment cabinet doors open simply to use your IR remote control. The Hidden Link Designer IR Kit makes it possible to control up to four different audio and video components behind solid doors or walls using your existing IR remote. The included Hidden Link compact, black shelf-top IR receiver was designed to be the only visible piece of equipment. The included connecting block supplies power to the IR receiver using the included power supply. The connecting block receives IR signals coming from the IR receiver and distributes the IR signals out to your audio and video components using the included designer IR emitters. The use of this kit will leave you with the clean lines of your entertainment center without looking at unsightly stacks of equipment and cables. You can continue using your existing IR remote with the confidence it will communicate with your AV equipment behind doors and walls.
|
Xantech HL85B Universal Hidden Link Standard Range Receiver
|
|
Shelf-Top IR Sensor Makes IR Distribution a Breeze to Install
•Designed to work with LCD displays and CFL lights
•Ideal for placement on a shelf-top or a cabinet near a TV
•IR frequency bandwidth within 25 - 60 kHz
•Receives IR signal up to 80 feet
•Talkback LED
The Hidden Link IR Receiver is a small shelf-top infrared repeater assembly. It includes an IR receiver and a CB12 Connecting Block. The Hidden Link IR Receiver is equipped with a 7-foot cable and a 3.5mm stereo mini plug, which is plugged directly into the "IR RCVR" jack on the CB12. It can also be plugged into the "AUX" or "IR RCVR" jack of other Xantech connecting blocks, such as the models 789-44, CB60, and 791-44. The Hidden Link IR Receiver is primarily intended for use in installations where the connecting block is within reach of its 7-foot cable - as when installing the Hidden Link IR Receiver in a cabinet where the controlled equipment is behind closed doors.
|
Xantech 283TPD Visible Designer Emitter With Twin Plug
|
|
Xantech 283TPD Visible Designer Emitter With Twin Plug
• 283D Visible Designer Emitter with two 3.5mm plugs
• Allows control of single source by two IR systems
• Diode isolation for independent control and component protection
• Wire length: 10 feet
|
Xantech 282TPD Designer Emitter With Twin Plug
|
|
•282D high-output Designer Emitter with two 3.5mm plugs
•Allows control of single source by two IR systems
•Diode isolation for independent control and component protection
•Wire length: 10 feet
|
Xantech CB12 - One-Zone Connecting Block
|
|
•Connects one emitter port and power supply to Xantech IR Receivers that use a stereo mini plug
•Also includes a three-terminal block for wired connection of Xantech IR Receivers and Smart Pads
•3.5 mm stereo mini jack for quick-connect IR receivers
•3.5 mm mono mini jack for one single or one dual emitter
•2.1 mm coaxial power jack
•Requires either the 781ERGPS or 782ERGPS Power Supply
•Dimensions:
|
Xantech ML95 - Universal Micro Link Extended Range Receiver
|
|
DESCRIPTION
The Micro Link IR Receiver is a small peep-hole style infrared repeater
assembly. The Micro Link IR Receiver is equipped with a 7-foot cable and
a 3.5mm stereo mini plug, which is plugged directly into the “IR RCVR”
jack on the connecting block, such as the models 789-44, CB60, and 791-
44. The Micro Link IR Receiver is primarily intended for use in installations
where the connecting block is within reach of its 7-foot cable – as when
installing the Micro Link IR Receiver in a cabinet where the controlled
equipment is behind closed doors.
|
Xantech EN85 Universal IR Receiver Kit
|
|
The EN85K Ensemble is a convertible IR Receiver Kit that can be adapted to almost any surface mount, flush mount or shelf mount application. It includes all of the parts necessary for installing a single-room IR Repeater System for controlling a TV, Audio/Video Receiver, Blu-ray player, Cable Box, Satellite Receiver...just about any IR controlled A/V home entertainment device.
The kit includes an IR Receiver that can be attached to the front of a TV, or extended from behind with the TV Mount Adapter on flat panel TVs that have a minimal frame around the display area. The receiver can also be adapted to low-profile shelf-top placement with the Tabletop Adapter or inconspicuously mounted in a cabinet door with the Flush Mount Adapter for controlling IR components hidden in an equipment cabinet.
|
Xantech DL85 - LCD/CFL Proof Dinky Link IR Receiver
|
|
DESCRIPTION
These small IR receivers have been designed for mounting in very small
spaces. They may be mounted under shelf edges, cabinet ledges, in wall
speakers, etc. – anywhere an inconspicuous appearance is desired. The high
sensitivity of these receivers allows placement behind speaker grilles and still
receive IR commands up to 80 feet away*.
FEATURES
• Wire channel for clean installation.
|
Xantech WL85 - LCD/CFL J-Box Receiver
|
|
The WL85 is designed to reject interference from Plasma, LCD, LED
Displays and Compact Fluorescent Lamps (CFL) from entering the IR signal
line. This IR Receiver mounts easily into a single gang, electrical J-Box, is
supplied with mounting screws, and comes with a Decorator-style insert,
allowing the installer to use a Decorator-style wall cover plate. This provides
an integrated look for control of A/V equipment behind closed doors or any
IR Repeater System that is in close proximity to light sources described
above.
|
Xantech DL85K Dinky Link Kit
|
|
Surface-mount design Standard Range (up to 80 feet) Works with LED, LCD & plasma TV’s and CFL lighting For use with all types of cable boxes, satellite boxes, remote controls and TVs White, silver & black trim kit included to match any AV system Kit includes: 1x DL85 IR receiver 1x Model 789-44 connecting block • Connects one IR receiver to 4 IR emitter ports • Enough power to drive up to 4 dual emitters
|
Page 2
( Displaying 10 of 23 Products )
|
|
Search for products that may contain the words:
within
using