The S7 NetPower amplifier is a shelf or wall
mountable 2 x 100W (at 4Ω) power amplifier. It
perfectly compliments the S7 NetAmp to give a
higher performance to a stereo zone. It can also be
used independently with other equipment as it has
some great installation friendly features such as 12V
trigger, manual or music sense switching, bridge
mode to mono (200W at 8Ω), loop outputs for audio
and comes with wall mounting brackets.
Power:
Continuous outputs
4Ω 100W
8Ω 55W
8Ω Bridged 200W
Standby consumption < 0.5W
Mains voltage Set by an internal link 115 or 230V
Audio:
THD At 80% rated power, 8Ω 20Hz-20kHz < 0.07%
Signal / Noise ratio A weighted ref 55W/8Ω > 113dB
Input sensitivity At max gain, ref 55W into 8Ω 740mV
Gain control range 9dB - 29dB
Input Impedance 18KΩ//220pF
Frequency response 20Hz-20kHz (+/-) 0.5dB
60kHz (-)3dB
DC Trigger:
Input sensitivity < 5V
Input resistance 10 kΩ
Auto switch on:
Sensitivity Mono source, L=R 3mV
General:
Dimensions Height: 86.5mm, Width: 219mm, Depth: 170.5mm
Net Weight 2.12kg