Authorised Linn Dealer

Authorised Linn Dealer

DS and LP12 Turntable Specialists

why shop @ stoneaudio?
  • High end, 2 channel hi-fi experts
  • UKs finest projection home cinema room
  • Multi-room specialists
  • Installation service
  • Hugely Knowledgeable staff
  • Quality brands
  • Best prices (Price Promise)
  • 30 day money back guarantee
  • Not just a website, visit the UKs best hi-fi showroom
  • FREE parking


Basket Empty
Total 0.00
Secured by Sage Pay Secured by Globalsign SSL
More Articles...


HDMI Input, HDBaseT™ Output and Mirrored HDMI with Audio Input, DSP Output and IR to zone (4K:70m/230ft | 1080p:100m/328ft)

The standard Transmission card found in the H2X platform, the TX-H2X-HDMI transmits 4K UHD signals from 70m/230ft over it's Class A HDBaseT™ output and features an HDMI output that mirrors HDBaseT™. The HDMI output is perfect for connecting to a local monitor, AVR, or signal extension via extender product or one of WyreStorm's Hybrid Active Optical Cables (HAOC).

The highest possible bandwidth that currently exists according to the HDMI 2.0 specification can be managed by the TX-H2X-HDMI and sent over distance. Newly emerging 60Hz HDR-10 & Dolby Vision content can also be handled by this powerful future-ready device.

Multi-zone transmission of HDR-10 content is nothing new to WyreStorm; we’ve been sending this high-bandwidth content, native & uncompressed over long distances since the introduction of our first H2 extender in 2015. The H2X is no different and with the TX-H2X-HDMI, sending pixel-perfect 4K UHD 4:2:0 10-bit @24Hz at distances up to 100m/328ft

No two rooms or even installations are the same. That’s why we’ve coupled to each audio zone output; a powerful audio DSP, which allows an integrator to have complete control over the audio configuration. Also, a 10-band equalizer, level trim and variable delay, which can be set per zone for a truly customized room-by-room balance.

Experience the robust signal transmission of Class A HDBaseT™ technology the TX-H2X-MIR has to offer, with superior signal transmission of 4K of up to 70m/230ft and 1080p up to 100m/328ft, with compatible Class A HDBaseT receivers. If that wasn’t enough, the TX-H2X-HDMI also includes an additional HDMI output that can mirror it’s respective HDBaseT output to connect to an additional monitor or AV receiver, or to be used in its singular form to output HDMI’s full potential of 18Gbps transmission.

•18Gbps HDMI input
•HDBaseT™ Output - Transmitting Class A HDBaseT™ which includes video, audio, control and power up to 70m/230ft of 4K and 100m/328ft of 1080p
•HDMI Output - Mirrored to HDBaseT™ to allow additional connection of a local display device, AVR or to extend with a hybrid active optical HDMI cable (HAOC)
•Stereo Audio Output - Offering stereo audio breakout of a zone with a 3-pin phoenix connector for analog audio
•S/PDIF output supporting 5.1 audio content de-embedded from sources or ARC from connected zones
•S/PDIF Audio Input - Another way to inject digital audio to take advantage of the H2X platform’s powerful audio matrix and DSP.
•IR RX - Allows control signals to be sent to the sink device

Audio and Video

1x HDMI In: 19-pin type A
1x HDMI Out: 19-pin type A
1x S/PDIF In: S/PDIF Coaxial Digital

1x HDBaseT™ Out: 8-pin RJ-45 female
1x S/PDIF Out: S/PDIF Coaxial Digital
1x Audio Out: 3-pin Phoenix

Output Video Encoding: HDBaseT™ Class A
Encoding Data Rate: 9.2 Gbps
End to End Latency: 10μs (micro seconds)

Audio Formats:
S/PDIF: 2ch PCM | Multichannel: Up to 5.1 DTS and Dolby Digital
HDMI: 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Communication and Control:-
HDMI: HDCP 2.2 | EDID | DVI-D supported with adapter (not included)
HDBaseT™: HDMI | HDCP 2.2 | EDID | 1-way PoH to Receiver | IR RX to Receiver
IR: 1x IR RX 3.5mm (1/8in) TRS Stereo | To Receiver over HDBaseT™
RS-232: From Matrix - No Connection on card | Bidirectional over HDBaseT™
Ethernet: From Matrix - No Connection on card | Bidirectional over HDBaseT™
ARC (Audio Return Channel): Returns audio from displays built-in applications via ARC HDMI Input over HDBaseT™ (Requires ARC or SCL Receiver)

Power Supply: Internal to Matrix
Max Power Consumption: Matrix Dependent
PoH: 48V 15.4W

Operating Temperature: Matrix Dependent
Storage Temperature: Matrix Dependent
Maximum BTU: Matrix Dependent

Safety and Emission: Matrix Dependent

Bookmark and Share

Please call to arrange demonstration

Search for products that may contain the words:
within using

order today, delivered tomorrow!*

Home | About | Contact | News | FAQ | Glossary | Classifieds | Testimonials | Install | Sitemap

Hi-fi | Home cinema | Multi-room

* Where product is stocked and order received before 2pm