Epos
Epos K-Series Speaker Stands
£200.00 inc. VAT
(£166.67 ex. VAT)
Available - 2-3 Days
Overview:-
Introducing the new K-Series speaker stands. These speaker stands have been designed to match the K1 and K5. Their construction allows the reinforcement of low frequencies and clear mid-range due to their low resonance and rigid build.
There is a dedicated stand for the K1 and for the K5. The top plate has been designed to physically match the speakers shape to seamlessly join the tow together.
Design:-
The look is both elegant and sleek with subtle detailing on the front centre pillar consisting of two vertical lines.
On the rear of the stand you will find a cut-out on the centre pillar allowing you to hide cables. Supplied with the K-Stands are clips and ties that allow further cable management options.
The top plates have 4 counter-sunk holes allowing for the use of stick-on rubber feet. These feet are to prevent the speakers accidentally being pushed off the stands.
The stands are supported by the chrome K-Series 6mm spikes and floor protectors.
If you are looking to complete your K1 or K5 system, the K-Series loudspeaker stand should be at the top of your list.
Technical Specifications:-
Height (without spikes)
K1 Stand = 540mm
K5 Stand = 580mm
Total Height (with bottom spikes)
K1 Stand = 570mm
K5 Stands = 610mm
Bottom spike diameter
6mm
Number of columns
1 x 50mm width x 80mm depth
Top spikes
8 x Stick-on Rubber feet (Optional)
Bottom spikes
8 x 6mm (Optional)
Colour
Satin Black
Weight
3.5 kgs each
Introducing the new K-Series speaker stands. These speaker stands have been designed to match the K1 and K5. Their construction allows the reinforcement of low frequencies and clear mid-range due to their low resonance and rigid build.
There is a dedicated stand for the K1 and for the K5. The top plate has been designed to physically match the speakers shape to seamlessly join the tow together.
Design:-
The look is both elegant and sleek with subtle detailing on the front centre pillar consisting of two vertical lines.
On the rear of the stand you will find a cut-out on the centre pillar allowing you to hide cables. Supplied with the K-Stands are clips and ties that allow further cable management options.
The top plates have 4 counter-sunk holes allowing for the use of stick-on rubber feet. These feet are to prevent the speakers accidentally being pushed off the stands.
The stands are supported by the chrome K-Series 6mm spikes and floor protectors.
If you are looking to complete your K1 or K5 system, the K-Series loudspeaker stand should be at the top of your list.
Technical Specifications:-
Height (without spikes)
K1 Stand = 540mm
K5 Stand = 580mm
Total Height (with bottom spikes)
K1 Stand = 570mm
K5 Stands = 610mm
Bottom spike diameter
6mm
Number of columns
1 x 50mm width x 80mm depth
Top spikes
8 x Stick-on Rubber feet (Optional)
Bottom spikes
8 x 6mm (Optional)
Colour
Satin Black
Weight
3.5 kgs each
£166.67