
Parasound HALO A23+ Power Amplifier
Two-Channel Power with Elegance and Precision
The Parasound A23+ brings studio-level amplification into your listening room—delivering clarity, depth, and control that defies its compact size.
Co‑designed by legendary engineer John Curl, it features a dual-mono Class A/AB architecture with independent transformers per channel. With 160 W per channel into 8 Ω (240 W into 4 Ω) and bridgeable to 500 W, along with balanced XLR and gold-plated RCA inputs, the A23+ integrates seamlessly into stereo or home theater systems.
Praised by reviewers:
- SoundStage! – “Parasound provides great value… I haven’t heard better sound or seen higher build quality at this price. An impressive power amplifier.”
- Home Theater Hi-Fi – “Solidly constructed and good‑looking amplifier… Balanced sonic characteristics with good presentation of musical details.”
- The Audio Tailor – Highlights “transparency from a sonorous 5 Hz sub-bass right through to 100 kHz,” pointing to exceptional clarity and signal purity.
Changes from the original A 23→A 23+:-
•125 → 160 Watts (8Ω)
•225 → 240 Watts (4Ω)
•400 → 500 Watts (bridged)
•Filter cap: 40,000 uF →54,400 uF
•Crosstalk (20kHz): 63dB → 70dB
•Transformer size: 1.0 kVA → 1.1 kVA
•Refined Halo cosmetic with aluminum end caps & gold highlights
•Updated rear panel with heavy duty speaker terminals from HINT 6
•Upgraded internal gold on gold audio connections
•Updated auto turn on circuit
All Features:-
•160 watts x 2 @ 8 Ω RMS, both channels driven
•240 watts x 2 @ 4 Ω RMS, both channels driven
•500 watts x 1 @ 8 Ω, in bridged mode
•Circuitry designed by legendary John Curl
•High bias Class A/AB operation
•45 amperes peak current per channel
•Stable with speaker impedance dips below 2 Ω
•Balanced inputs with discrete circuits
•Heavy-duty 24k gold-plated 5-way speaker binding posts
•Gold-plated RCA input & loop output jacks
•Direct-coupled signal path, no capacitors or inductors
•DC Servo and relay protection circuits
•AC turn-on inrush surge protection with relay bypass
•JFET input stage, MOSFET driver stage
•12 beta-matched 15 ampere, 60 MHz bipolar output transistors
•1.1 kVA shielded toroid transformer w/ independent windings for each channel
•Independent power supplies for input stage, driver stage and output stage
•54,400 µF filter capacitors for output stages
•Full power is rated all the way down to 5Hz for unrestricted low-end bass
•Harris hyper-fast soft-recovery bridge diode rectifiers
•Automatic turn-on by 12 V trigger or audio sensing
•2 rack space chassis with rear carry handles
•Rack mount hardware available separately
•Available in silver or black
Technical Specifications:-
Power Output – Stereo Mode (0.06% THD):
160 watts x 2, 8 Ω both channels driven
240 watts x 2, 4 Ω both channels driven
Power Output – Stereo Mode (0.9% THD):
210 watts x 2, 8 Ω both channels driven
300 watts x 2, 4 Ω both channels driven
Power Output – Bridged Mode (0.06% THD):
500 watts x 1, 8 Ω
Bridged 4 Ω operation is not recommended
Power Output – Bridged Mode (0.9% THD):
600 watts x 1, 8 Ω
Bridged 4 Ω operation is not recommended
*All Power measurement are at 120 VAC, RMS continuous power, full audio band (20 Hz - 20 kHz)
Current Capacity: 45 amps peak, per channel
Slew Rate: > 130 volts per microsecond
Frequency Response:
5 Hz - 100 kHz, +0/-3 dB
20 Hz - 20 kHz, +0/-0.25 dB
Total Harmonic Distortion (THD):
< 0.06 % at full power
< 0.03 % at typical listening levels
v IM Distortion: < 0.04 %
TIM: Unmeasurable
Inter-channel Crosstalk:
> 85 dB at 1 kHz
> 70 dB at 20 kHz
Input Impedance:
Unbalanced: 33 kΩ
Balanced: 66 kΩ,(33 kΩ per leg)
Total Gain: 29 dB
Input Sensitivity for 28.28 V Out (8 Ω Load):
Unbalanced: 1 V
Balanced: 1 V per leg
v S/N Ratio:
> 112 dB, input shorted, IHF A-weighted
> 107 dB, input shorted, unweighted
Damping Factor: > 800 at 20 Hz
DC Trigger Requirements: +9 Vdc to +12 Vdc, 5 mA
Audio Trigger Requirements: 2 mV - 10 mV
XLR Pin Identification:
1 = Ground (Shield)
2 = Positive
3 = Negative (Return)
Dimensions:
Width: 17-1/4" (437 mm)
Depth: 15"-1/4" (388 mm)
Depth, with cables 17" (432 mm)
Height, with feet: 4-1/8" (105 mm)
Height, without feet: 3-1/2" (89 mm), 2U
Net Weight: 27 lb. (12.2 kg)
Shipping Weight: 34 lb. (14.4 kg)
Power Requirement:
Standby: < 1 Watt
Idle (no music playing): 75 Watts
Typical Listening levels: 125 Watts
Maximum: 800 Watts
110-125 VAC 60 Hz or 220-250 VAC 50 Hz
AC mains voltage is set on rear panel