Rako
Rako RAMVR
£146.40 inc. VAT
(£122.00 ex. VAT)
Available - 2-3 Days
The RAMVR is a wireless interface module for third
party presence sensors.
The RAMVR integrates third party presence sensors into a Rako wireless system where Rako's RAPIR may not be suitable, such as external use. It also allows sensors using other detection methods such as break-beam or microwaves to be used.
The RAMVR is mains powered and allows direct connection to sensors that switch mains power. The module also has isolated volt-free inputs connections for dry contact or DC logic inputs.
The module can be manually addressed or programmed using Rasoft Pro for more advanced programming.
Programming functions include:-
Set scene only when lights are off – Allows lights to be dimmed without the PIR overriding.
Auto off – Turns lights off when no movement is detected.
Exit delay – Allows users to manually turn lights off before the PIR becomes active again.
Other Room Controllers disable Auto-Off – A manual wallplate can disable the auto-off function, allowing long periods of inactivity without turning lights off.
The RAMVR can also be used to interface mains voltage, non-sensor type inputs into a Rako wireless system.
Note: The RAMVR is not intended primarily for connection to volt-free, nonsensor inputs where the RMR-VF provides a more flexible solution.
v Technical Specifications:-
Dimensions: 172x46x40mm
Input supply: 230V AC +/-10% 50Hz
Weight: 180g
Housing: UL V0 ABS
Climate range: Temperature +2C to +40C
Humidity +5% to 95% non condensing
Connections: Screw terminal
Standards: Emissions - EN61000-6-3 : 2007 Immunity - EN61000-6-1 : 2007 LVD - EN 60950-1 :2006
Communication: Rakom coded fm radio, 433.9MHzv Memory: Flash memory (non volatile)
The RAMVR integrates third party presence sensors into a Rako wireless system where Rako's RAPIR may not be suitable, such as external use. It also allows sensors using other detection methods such as break-beam or microwaves to be used.
The RAMVR is mains powered and allows direct connection to sensors that switch mains power. The module also has isolated volt-free inputs connections for dry contact or DC logic inputs.
The module can be manually addressed or programmed using Rasoft Pro for more advanced programming.
Programming functions include:-
Set scene only when lights are off – Allows lights to be dimmed without the PIR overriding.
Auto off – Turns lights off when no movement is detected.
Exit delay – Allows users to manually turn lights off before the PIR becomes active again.
Other Room Controllers disable Auto-Off – A manual wallplate can disable the auto-off function, allowing long periods of inactivity without turning lights off.
The RAMVR can also be used to interface mains voltage, non-sensor type inputs into a Rako wireless system.
Note: The RAMVR is not intended primarily for connection to volt-free, nonsensor inputs where the RMR-VF provides a more flexible solution.
v Technical Specifications:-
Dimensions: 172x46x40mm
Input supply: 230V AC +/-10% 50Hz
Weight: 180g
Housing: UL V0 ABS
Climate range: Temperature +2C to +40C
Humidity +5% to 95% non condensing
Connections: Screw terminal
Standards: Emissions - EN61000-6-3 : 2007 Immunity - EN61000-6-1 : 2007 LVD - EN 60950-1 :2006
Communication: Rakom coded fm radio, 433.9MHzv Memory: Flash memory (non volatile)
£122.00