Rako
Rako RMS800 800W Ceiling Mount Switch Module External Aerial
£109.00 inc. VAT
(£90.83 ex. VAT)
Available - 2-3 Days
The RMS800 in-line RF switch module for non
dimmable loads
Designed to fit in a ceiling void or cupboard, the RMS800 module can control up to 800VA of mains non-dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure.
16 Scene memory capacity, can be fully integrated into Rako wired systems.
Easy set-up and manual On/Off control using the set-up button. Full rising clamp terminals and mounting bracket for easy installation. Programmed using either an RCM/RCP RF wall-plate or RASOFT PC software suite, the RMS800 stores the House, Room and Channel address plus 16 preset scene levels in a non-volatile memory. The RMS800 can be controlled from any Rako transmitter such as RCM/RCP wallplates, RAH hand-helds and Bridge modules and forms the foundation of any Rako wireless scene-set system.
Specifications:-
dimensions 138x46x40mm
input supply 230V AC +/-10% 50Hz
weight 205g
housing UL V0 material
climate range Temperature +2C to +40C
Humidity +5% to 95% non condensing
connections 3 way screw terminals for mains power
protection Auto resetting over current protection
Auto thermal shutdown
Voltage surge protection
load types All non dimmable lighting loads e.g. Extractor fans and water pumps.
minimum load N/A
maximum load 800VA
terminal sizes 4mm2
standards Emissions - EN61000-6-3 : 2001
Immunity - EN61000-6-1 : 2001
communication Rakom coded fm radio, 433.9MHz
memory Flash memory (non volatile)
Designed to fit in a ceiling void or cupboard, the RMS800 module can control up to 800VA of mains non-dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure.
16 Scene memory capacity, can be fully integrated into Rako wired systems.
Easy set-up and manual On/Off control using the set-up button. Full rising clamp terminals and mounting bracket for easy installation. Programmed using either an RCM/RCP RF wall-plate or RASOFT PC software suite, the RMS800 stores the House, Room and Channel address plus 16 preset scene levels in a non-volatile memory. The RMS800 can be controlled from any Rako transmitter such as RCM/RCP wallplates, RAH hand-helds and Bridge modules and forms the foundation of any Rako wireless scene-set system.
Specifications:-
dimensions 138x46x40mm
input supply 230V AC +/-10% 50Hz
weight 205g
housing UL V0 material
climate range Temperature +2C to +40C
Humidity +5% to 95% non condensing
connections 3 way screw terminals for mains power
protection Auto resetting over current protection
Auto thermal shutdown
Voltage surge protection
load types All non dimmable lighting loads e.g. Extractor fans and water pumps.
minimum load N/A
maximum load 800VA
terminal sizes 4mm2
standards Emissions - EN61000-6-3 : 2001
Immunity - EN61000-6-1 : 2001
communication Rakom coded fm radio, 433.9MHz
memory Flash memory (non volatile)
£90.83