|
Page 35
( Displaying 10 of 648 Products )
|
|
|
IsoAcoustics GAIA II
|
|
GAIA II provides improved sound clarity and openness for floor standing speakers
GAIA II is designed for floor standing speakers weighing up to 120 lbs (54Kg). Finished in an elegant machined dark chrome metal housing, the GAIA II incorporates IsoAcoustics’ patented design principles to deliver extraordinary acoustic results. GAIA II provides a high degree of isolation while resisting lateral movement and oscillations to maintain alignment with the listening position. Internal reflections from the hard-supporting surface are attenuated resulting in greater sound clarity and openness.
|
|
IsoAcoustics GAIA III
|
|
GAIA III provides improved sound clarity and openness for floor standing speakers.
Crafted with the vision of providing extraordinary acoustic performance, the GAIA III is the union of aesthetic visual design and acoustic engineering. Compatible with floor standing speaker weighing less than 70lbs, this small compact design delivers unbelievable acoustic isolation that will bring out a clarity and openness from your speaker you’ve never heard.
|
|
Townshend Seismic Bars
|
|
Seismic Isolation Bars for Speakers and Sub-woofers
Produce a wider and deeper sound stage.
Enhance clarity throughout the whole frequency range.
Improve bass definition.
Eliminate structure-borne feedback between the speaker and vibration sensitive equipment.
Allow for neighbour friendly high level listening.
Eliminate irritating boom caused by coupling through the floor to adjacent rooms.
Seismic
|
|
Townshend Seismic Pods
|
|
Seismic Isolation Pods
Eliminates structure-borne feedback between speaker and vibration sensitive equipment.
Enhances clarity throughout the whole frequency range.
Improves bass definition.
Produces a wider and deeper sound stage.
Neighbour friendly high level listening.
Positioned under any piece of equipment, four Seismic Isolation Pods will dramatically improve the sound by breaking the acoustic connection between the audio system and structural vibrations in the room.
|
|
Townshend Seismic Corners (Set of 4)
|
|
Seismic Isolation Support Corners
Eliminates structure-borne feedback between speaker and vibration sensitive equipment.
Enhances clarity throughout the whole frequency range.
Improves bass definition.
Produces a wider and deeper sound stage.
Neighbour friendly high level listening.
Seismic Sink Corners provide vibration isolation for almost any equipment rack, stand, platforms or speaker. Each Corner is a small platform suspended from two Seismic Load Cells™ on which the equipment legs or spikes are placed.
|
|
Townshend Seismic Podiums
|
|
Seismic Isolation Podium
Designed as a range to accommodate any size and weight of speaker – standmount plus stand, floorstander or subwoofer – the Seismic Podium breaks the acoustic connection between the floor and the speaker, preventing the passage of deleterious vibrations both to and from the speaker cabinets. For a detailed explanation of why this is an absolute necessity before any speaker can perform to its true potential, read ‘Earthquakes on hi-fi’.
|
|
Townshend Seismic Platform
|
|
Seismic Vibration Isolation Platform
Ultra thin platform disappears under equipment
Enhances clarity across the frequency range
Delivers wider and deeper soundstages
Improves bass definition
Reduced muddiness and smear
Makes transients clearer
Especially designed to isolate individual components such as CD players, turntables, DACs, preamplifiers, power amplifiers and streamers from vibration.
The Seismic Isolation Platform includes a durable slim steel top plate that integrates unobtrusively under any hi-fi component. The acoustically dead constrained-layer damped plate combined with a Seismic Load Cell™ attached to each corner is the ultimate combination to absorb and isolate unwanted vibration, including structural, air-borne and that generated by the hi-fi equipment.
|
|
Linn (MECH 072/2) No.6 X 3/4 POZI RND Woodscrew Black Zinc
|
|
Linn self tapping black zinc 3/4" woodscrews.
These 3/4" length wood screws are used in the following places on the Linn LP12 Turntable:
4x used to attach the 4 rubber feet through the baseboard and into the base of the wooden plinth.
2x used on the baseboard to secure the middle rectangular washers.
2x used for the plastic Mains cable clamp on exiting the wooden plinth.
2x used for the mains cable clamp found on the wiring strap.
|
|
Linn (Mech 016) No.6 X 1/2 Supa Pan Self Tapping Screw
|
|
Linn 1/2" length Wood screw used in the following places on the Linn LP12 turntable:
8x used to secure the hinge back plates to the rear of the LP12 wooden plinth.
8x used for Solid Base and Trampolin base board.
4x used to secure wiring strap to wooden plinth.
|
|
Avid SIEVEKING Shielding RCA and XLR Covers
|
|
Sieveking Sound
Avid is pleased to confirm distribution of Sieveking Sound from Germany.
Sieveking Sound RCA and XLR End Caps are a NECCESARY accessory for all unused analogue inputs and outputs of audio components.
The caps are made of pure copper and are coated with gold. Inside there is an additional Teflon insert. This unique combination allows excellent high-frequency absorption.
|
|
Page 35
( Displaying 10 of 648 Products )
|
|
Search for products that may contain the words:
within
using