|
Page 36
( Displaying 10 of 648 Products )
|
|
|
Avid Isopuks
|
|
Isopuks are highly effective isolators designed to reduce structure borne vibration and its deleterious effects on audio signals.
Structure borne vibration affects virtually every piece of audio equipment, but its effects are most damaging to the tiny signals read and processed by source components such as CD players and non-isolated turntables.
Vibration enters audio components via the feet & the chassis, reducing clarity, smearing detail and distorting frequency response. Eliminating this structural resonance in audio equipment results in instantaneous audible improvements; increases in soundstaging, improved imaging and (most importantly) smoother more natural tonal balance.
|
|
Artesania Audio High Mass Dampers
|
.jpg "Artesania Audio High Mass Dampers")
|
Dampers are anti-magnetic and shock absorbing
masses that act against vibrations generated in
electronic components. These could be from
power sources (transformers) and could also be a
consequence of the ondulatory movement of
sound as it bounces back off the furniture and
cabinets housing electronic equipment. These
air-borne vibrations cause interference and
background noise that are detrimental to the
listening experience.
|
|
|
|
|
|
|
|
|
|
|
£ 149.00
* |
|
|
|
|
|
£ 188.00
* |
|
|
|
|
|
£ 248.00
* |
|
|
| * Only available for purchase in-store |
|
Palladio Transformer (PAL-TRA)
|
|
Palladio Transformer (PAL-TRA) - Replacement Part
Palladio's Transformer Unit is compatible with all Palladio Home Cinema Seating.
|
|
Michell Cartridge Tags (set of 4)
|
|
These are the ultimate cartridge tags and they come as standard on Michell's Techno Arm ‘A’. Silver-platted for superior conductivity, their cartridge tags are milled from solid brass and offer a unique spring-loaded connection for improved pin contact. Four colour-coded heat-shrink sleeves are included.
|
|
Michell New Rega 3-Point VTA Adjuster
|
|
New Rega 3-Point VTA Adjuster
The Rega 3-point fixing VTA (Vertical Tracking Angle) Arm Adjuster has been designed for the range of Rega arms (RB-251 and RB301) that use the recently introduced 3-point fixing. Once installed, the user can adjust the vertical tracking angle in minute increments without losing the rigid 3-point mounting so important to proper sound reproduction.
The VTA adjustor, at its minimum setting, raises the tone arm by 2mm, which is the same as the thinnest setting on the moulded adjuster available from Rega. It comes packed with two different thickness adjuster rings (the thinner ring is designed to lift the tonearm base 0 to 2mm and the thicker ring will lift the base 2 to 4 mm) and all of the fixings necessary as well as a nylon nib to help rotate the base notches if access is tight.
|
|
Michell Iso Base
|
|
Iso Base
The Iso Base is the ideal platform to place your Michell Engineering turntable. Its inert material characteristic combined with the tenderfeet give it the extra isolation that is necessary for the very best performance from your deck.
|
|
Michell SEcure Cover
|
|
SEcure Cover
NEW DESIGN
Available to fit the Orbe SE, Gyro SE and Gyro SEduction, the new SEcure Cover has been designed to totally cover the whole deck (platter, motor and arm assembly) and is the is the best solution to keep your naked Michell Engineering turntable free of dust.
The Iso Base shown in the image is sold separately.
|
|
Michell Orbe Clamp Kit
|
|
Orbe Clamp Kit
To bring all of the added benefit of the Orbe screw-down record clamp to GyroDec and Gyro SE owners, the Orbe Clamp Kit contains a new, threaded record spindle that can be easily retro-fitted to the bronze spindle housing. Once fitted, the record clamp screws down giving a much firmer coupling to the platter as well as flattening out any warps in your precious vinyl.
|
|
Michell Orbe Platter Kit
|
|
Orbe Platter Kit
The Orbe Platter Kit offers owners of GyroDecs and Gyro SE’s the opportunity to take their turntables to the next performance level. Taking many of the Orbe’s unique qualities, the Orbe Platter Kit contains the following items:
60 mm thick massive acrylic/vinyl platter of high inertia
Screw-down record clamp, compatible with standard and 180g audiophile pressings
Replacement
|
|
Meridian Prime Power Supply
|
|
Meridian’s Prime Power Supply is a reference-quality, high-current design based on the new linear power supplies developed for Meridian’s 800 Reference Series and specifically built for audio applications.
Meridian Prime Power Supply can be used to power a range of Meridian products, including the Meridian Prime Headphone Amplifier, Audio Core 200, Meridian Director and Media Source 200. The addition of Prime Power Supply to these components provides an enhancement in their performance, much like supercharging your car’s engine.
At the heart of the Prime Power Supply is a hand-assembled true toroidal transformer: a high-mass, low-profile, low magnetic field design. In addition to its integral magnetic shield, it’s mounted on a metal plate to shield electronics from noise.
Each output on the Prime Power Supply includes multi-stage regulation using a total of six extremely low noise linear regulators. Both the 12V and 5V USB outputs include pre-regulators prior to the output regulators. Even though the 12V outputs are rated at just 500mA, they utilise heavily over specified 5A linear regulators, selected by a rigorous evaluation process, including extensive listening tests.
Meanwhile, the USB supply features a new high-efficiency low-dropout (LDO) linear regulator design that features less than 5μVrms output noise in the range 10 – 100k Hz.
|
|
Page 36
( Displaying 10 of 648 Products )
|
|
Search for products that may contain the words:
within
using