|
Page 21
( Displaying 10 of 359 Products )
|
|
|
CYP PU-304-KIT (PU304KIT) Digital Audio over CAT6 Extender Set
|
|
The PU-304-KIT is designed to send digital audio signals over 150m over CAT5e/6 cable infrastructure. This device supports both Coaxial and Optical signals and can transmit these signals up to 150m. The PU-304-KIT can be powered using a USB cable or the supplied PSU adaptor for added flexibility in a compact design. Digital SPDIF signals are supported up to a sample rate of 96Khz, and support for Stereo and Multichannel digital audio (LPCM, DTS, Dolby Digital, Dolby Digital Plus) is also provided.
|
|
CYP PU-305BD-RX (PU305BDRX) Bi-Directional Receiver
|
|
PU-305BD-RX Bi-Directional Digital Audio over Single CAT Receiver
The PU-305BD-RX is designed to receive digital audio signals up to 300m over CAT5e/6 cable infrastructure. This device is Bi-Directional and supports Digital Optical signals allowing transmission up to 300m at 96KHz sample rate, or 100m at 192KHz sample rate.This extender set also supports RS-232 signals over the same CAT5e/6 cable. The PU-305BD-RX can be powered at either end using the supplied PSU adaptor for added flexibility. Digital audio signals are supported up to a sample rate of 192Khz, and support for LPCM Stereo and Multichannel digital audio (LPCM, DTS, Dolby Digital, Dolby Digital Plus) is also provided.
|
|
CYP PU-305BD-TX (PU305BDTX) Bi-Directional Digital Audio Transmitter
|
|
PU-305BD-TX Bi-Directional Digital Audio over Single CAT Transmitter
The PU-305BD-TX transmitter is designed to send digital audio signals up to 300m over CAT5e/6 cable infrastructure. This device is Bi-Directional and supports Digital Optical signals allowing transmission up to 300m at 96KHz sample rate, or 100m at 192KHz sample rate.This extender set also supports RS-232 signals over the same CAT5e/6 cable. The PU-305BD-TX can be powered at either end using the supplied PSU adaptor for added flexibility. Digital audio signals are supported up to a sample rate of 192Khz, and support for LPCM Stereo and Multichannel digital audio (LPCM, DTS, Dolby Digital, Dolby Digital Plus) is also provided.
|
|
CYP PU-305BDA-RX (PU305BDARX) Bi-Directional Receiver
|
|
PU-305BDA-RX Bi-Directional Analogue Audio over Single CAT Receiver
The PU-305BDA-RX is an analogue Stereo over CAT5e/6/7 Receiver which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m. It has the added benefit of RS-232 pass-through allowing control of devices and the Power over Ethernet (PoE) function can power the receiver unit eliminating the need for a second power supply. As the unit has bi-directional capabilities, this device can also send audio signals back to the connected transmitter.
|
|
CYP PU-305BDA-TX (PU305BDA) Bi-Directional Transmitter
|
|
PU-305BDA-TX Bi-Directional Analogue Audio over Single CAT Transmitter
The PU-305BDA-TX is an analogue Stereo over CAT5e/6/7 Transmitter which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m. It has the added benefit of RS-232 pass-through allowing control of devices and the Power over Ethernet (PoE) function can power the receiver unit eliminating the need for a second power supply. As the unit has bi-directional capabilities, this device can also receive audio signals back from the connected receiver.
|
|
CYP PU-1106RX (PU1106RX ) HDMI over CAT5e/6 Receiver with IR Receiver
|
|
The PU-1106RX Receiver allows you to extend HDMI signals up to 40m over Twin CAT6 cabling infrastructure and use your existing Remote Control to control your source device with the included IR Receiver.
The PU-1106RX is specifically designed to be used with the PU-1106TX, PU-106TX Transmitters, the PU-Q1H4C and PU-Q1H8C Splitters, and the OR-HD88HC Matrix.
Specification:-
•v1.3 HDMI, HDCP 1.1 and DVI 1.1 compliant.
|
|
CYP PU-1106TX (PU-1106TX)HDMI over CAT5e/6 Transmitter with IR Blaster
|
|
The PU-1106TX Transmitter allows you to extend HDMI signals over Twin CAT6 cabling infrastructure and use your existing Remote Control to control your source device with the included IR Blaster.
The PU-1106TX is specifically designed to be used with the PU-1106RX Receiver, and the PU-Q1C4H and PU-Q1C8H Splitters.
Specification:-
•v1.3 HDMI, HDCP 1.1 and DVI 1.1 compliant.
•v1.3 HDMI over CAT6 Transmitter with IR Blaster
|
|
CYP PU-1107TX(PU1107TX)Pure digital HDMI over Single CAT6 Transmitter
|
|
PU-1107TX Pure digital HDMI over Single CAT6 Transmitter with Repeater function
The PU-1107TX can transmit a pure digital HDMI signal over a Single CAT6 cable allowing HD Audio & 'deep colour' support. This Transmitter unit is designed to be used with the PU-107RX receiver to extend HDMI signals to a single screen, with the added benefit that it can be used with the PU-1107EX Extender, for achieving even greater distances.
|
|
CYP PU-Q1H8CS (PU-Q1H8CS) 1 to 8 HDMI to Single CAT6 Splitter
|
|
The PU-Q1H8CS has 1 HDMI input and 8 Single CAT6 outputs to simultaneously distribute a HDMI source to eight displays up to a distance of 40m. This solution is perfect for distributing the HDMI source content over longer distances than is usually achievable with HDMI cable, using cost effective CAT6 cable infrastructure.
Use the PU-107RX Single CAT6 to HDMI Receivers on each of the eight CAT6 outputs to convert back from CAT6 to HDMI for connection to the display/s.
|
|
CYP OR-HD88HC (ORHD88HC) 8 x 8 HDMI Matrix Switcher
|
|
OR-HD88HC 8 x 8 HDMI Matrix Switcher with simultaneous HDMI & CAT Outputs (inc. IR)
The OR-HD88HC Matrix Switcher connects eight HDMI sources to 16 displays. This matrix features 8 HDMI outputs and each HDMI output is mirrored to provide a Twin CAT output which runs simultaneously. Connect a PU-1106RX Receiver to each of the Twin CAT outputs to extend the HDMI signal up to 45m for multi-room connectivity. This device supports ‘Deep Colour’, High Definition Audio, and 3D signal compatibility.
|
|
Page 21
( Displaying 10 of 359 Products )
|
|
Search for products that may contain the words:
within
using