Loudspeaker Cable is required to connect your speakers to your amplifier. Speakers can often be single wired (Shotgun configuration) or biwirable. To biwire your speakers you will require a bi-wire speaker cable with 4 cables / connectors at each speaker end.
|
Page 3
( Displaying 10 of 114 Products )
|
|
|
Chord Signature XL Speaker Cable
|
|
Signature XL speaker cable
Signature XL is the latest version of one of our longest running (and universally loved) products. The original Signature was our first high-frequency shielded speaker cable (2004) and marked a massive leap in speaker cable performance.
It was also the biggest, stiffest, brightest cable we’d ever made. The conductors were oxygen free copper, the insulation was gas foamed Polyethylene, Shielding was a three layer braid and foil combination, effective to high frequencies and the outer jacket a flexible polyethylene. It was just flexible enough to fit into a system. It didn’t need a press release or a review, it took off so fast by word of mouth, that for a while there was almost a permanent waiting list.
|
|
audioquest Termination PANTS for Speaker Cables
|
|
Termination "Pants" for Rocket series raw speaker cables.
Full Range:
You receive four "pants" all configured for 2 Connectors at the amp end and 2 connectors at the speaker end. (set of 4)
or
Single Biwire Range:
You receive two "pants" configured for 4 connectors at the speaker end and two "pants" configured for 2 connectors at the amp end. (Set of 4 pants)
Choose between Rocket 33, Rocket 44 or Rocket 88
|
|
audioquest SureGrip 100 Multi-Spade Installation Packs
|
|
SureGrip 100 Multi-Spade - Installation Packs
Direct-Silver or Gold Plating over Purple Copper
(2) Allen tools (hex wrenches) per Installation Pack
Fits up to 9 AWG speaker cables
Fits 1/4" - 5/16" Binding Post
SureGrip 100 Multi-Spade Silver or Gold
High-Purity Purple Copper provides a cleaner, clearer sound compared to the brass or phosphor-bronze used in common connectors.
Direct-Silver
|
|
audioquest SureGrip 100 BFA/Banana - Installation Packs
|
|
SureGrip 100 BFA/Banana Installation Packs
High-Purity Purple Copper provides a cleaner, clearer sound compared to the brass or phosphor-bronze used in common connectors.
Direct-Gold Plating is optimized for sound. It looks dull because there is no underlying layer of shiny, distortion-causing nickel.
Cold-Weld System creates an ideal connection with better sound than solder. Slide the no-magnetic-interference ABS casing over the multi-spade, then slide both onto the conductor. Tighten Allen screws with supplied tool to create a cold-weld connection between plug and conductor.
|
|
audioquest FireBird Bass Speaker Cables (Mythical Creatures)
|
|
FireBird BASS
FireBird BASS with GND is an ideal cable for the Bass and Midrange inputs of a BiWirable or TriWireable loudspeaker when used in combination with FireBird ZERO or Dragon ZERO Full-Range cable on the treble input.
Features:-
ZERO: No Characteristic Impedance for Uncompressed Current Transfer
The integrity of any audio transient (instantaneous peak-to-peak voltage swing and current) delivered from a power amplifier to a loudspeaker has always been compromised. Whether the amplifier is valve or transistor, regardless of class of operation, the amplifier’s source impedance and loudspeaker’s load impedance are never critically matched. The speaker cable’s characteristic impedance is yet another culprit in a highly compromised non-linear electrical circuit. AudioQuest has always stated that all cables cause damage because the output is never as good as the input. However, by eliminating a speaker cable’s characteristic impedance, AQ’s ZERO Technology is an unprecedented step towards reducing that damage. The result is greater dynamic contrast, better audio transient response, and bass slam that are rendered seemingly without effort because the cable is not electrically restricting (strangling) the music.
|
|
audioquest FireBird Zero Speaker Cables (Mythical Creatures)
|
|
FireBird ZERO
With the introduction of the Mythical Creatures series of speaker cables, AudioQuest has pushed significantly beyond even its own very high standards.
The same team responsible for the groundbreaking new series of AudioQuest AC power cables—AudioQuest's founder, William Low, and Director of Power Products, Garth Powell—has created what are simply the most transparent, get-out-of-the-way immersive speaker cables ever made. The Mythical Creatures series—ThunderBird, FireBird, and Dragon—are not merely an incremental evolution; their introduction represents a category advance in speaker cable design.
|
|
audioquest Dragon Bass Speaker Cables (Mythical Creatures)
|
|
Dragon BASS
Dragon BASS with GND is an ideal cable for the Bass and Midrange inputs of a BiWirable or TriWireable loudspeaker when used in combination with Dragon ZERO Full-Range cable on the treble input.
ZERO: No Characteristic Impedance for Uncompressed Current Transfer
The integrity of any audio transient (instantaneous peak-to-peak voltage swing and current) delivered from a power amplifier to a loudspeaker has always been compromised. Whether the amplifier is valve or transistor, regardless of class of operation, the amplifier’s source impedance and loudspeaker’s load impedance are never critically matched. The speaker cable’s characteristic impedance is yet another culprit in a highly compromised non-linear electrical circuit. AudioQuest has always stated that all cables cause damage because the output is never as good as the input. However, by eliminating a speaker cable’s characteristic impedance, AQ’s ZERO Technology is an unprecedented step towards reducing that damage. The result is greater dynamic contrast, better audio transient response, and bass slam that are rendered seemingly without effort because the cable is not electrically restricting (strangling) the music.
|
|
audioquest Dragon Zero Speaker Cables (Mythical Creatures)
|
|
Dragon ZERO
With the introduction of the Mythical Creatures series of speaker cables, AudioQuest has pushed significantly beyond even its own very high standards.
The same team responsible for the groundbreaking new series of AudioQuest AC power cables—AudioQuest's founder, William Low, and Director of Power Products, Garth Powell—has created what are simply the most transparent, get-out-of-the-way immersive speaker cables ever made. The Mythical Creatures series—ThunderBird, FireBird, and Dragon—are not merely an incremental evolution; their introduction represents a category advance in speaker cable design.
|
|
QED Professional QX16/2 PE Outdoor Speaker Cable
|
|
PROFESSIONAL QX16/2 Outdoor Speaker Cable - Black
High performance and exceptional quality installation speaker cables with a water and UV resistant PE outer sheath. They are designed to deliver excellent levels of performance in most outdoor installations with no additional conduit required.
FEATURES AND BENEFITS
Large cross-sectional area of high purity copper conductors
Ensures good performance levels are maintained even on longer runs
|
|
Chord EpicXL Speaker Cable
|
|
Epic XL speaker cable
Epic XL combines elements of our Epic and Signature Reference/XL speaker cables. A specially chosen soft PVC internal jacket is added to correctly space the shielding and minimise mechanical noise. A high density braid and foil shield is applied to each set of conductors and this is in turn protected by a translucent outer jacket, again chosen to reduce unwanted mechanical noise. Each set of Epic XL is built to order at The Chord Company. The conductors are twisted together and clamped in place before being terminated with either banana or spade connectors. By separately shielding the positive and negative conductors of each speaker cable run, we can produce a version of Epic that sounds markedly more refined and musically coherent. It’s particularly good at carrying micro-dynamics and detail and brings great separation and definition to instruments and voices.
|
|
Page 3
( Displaying 10 of 114 Products )
|
|
Search for products that may contain the words:
within
using