The secret to great lighting is being able to control it. Match your activity or mood to your visual environment. Set the lights as you need them and the setting is automatically saved as one of your custom scenes. Retrieve it later at the touch of a button; no individual switches or dimmers to adjust again and again. The possibilities are endless. In your living room, you can pre-set the lighting controls to suit the way that you live “Cinema”, “Homework”, “Entertaining”, “Cleaning”. Then with a hand-held remote control (or even your universal TV remote), you can change the ambience of your room without leaving your chair. You can control all the lights in one room or indeed the whole house from just one button and control natural light with a motorised window solution. You can also link the lighting controls to your security and AV systems.
Control Units have both a maximum power capacity limit per zone and a maximum power capacity limit per unit. Each zone cannot exceed the total Watts listed on the product, and each unit cannot exceed the total Watts outlined for the product. However, the maximum unit capacity can be allocated among each individual zone in the unit. For example, on a 4-zone unit at 230V with a maximum zone capacity of 800W and a maximum unit capacity of 2300W, some zones will not reach the individual zone maximum because the total unit maximum cannot exceed 2300W. Check total unit maximums before ordering
|
Page 10
( Displaying 10 of 102 Products )
|
|
|
Rako RX-Link Module
|
|
RF Receiver Module For RAK4 System.
This compact RF receiver is an integral part of a RAK4 system.
Connecting via Cat 5 cable, the RX-Link is capable of controlling up to four interlinked RAK4 modules.
Utilising Rakom coded RF control, an RX-Link will detect and relay RF commands from all Rako interfaces. These can include RCP keypads, RAV232 modules, the RAVIR, and RAVFR volt-free module.
SPECIFICATIONS
|
|
Lutron GRAFIK Eye - NGRX-PB-CE Power Booster
|
|
GRAFIK Eye Power Booster for Incandescent loads
* Compatible with all new Grafikeye Units 3100/3500, Integrale and B&O series
* Connect 1 device for each Grafikeye light circuit
|
|
Lutron GRX-8IT GRAFIK Eye 8 Scene IR Remote
|
|
The Lutron wireless remote control provides remote dimming or switching from the palm of your hand. An infrared transmitter in the remote control transmits signals to the infrared receiver unit. A signal can be transmitted up to a range of 50 feet line of sight, to all infrared receiver units.
The Lutron remote control uses 3 AAA batteries.
Scene selection buttons select eight scenes
Off button turns all lights off
|
|
Lutron GRAFIK Eye EGRX-8S-IR - European 8-Scene Selector IR
|
|
Lutron European 8 Scene Selector with IR Receiver for Grafikeye Integrale and 3000 models
* Grafikeye Wall station - 8 buttons for Light scene, plus all-off and raise/lower
* Select light scenes 1-8, 5-12, 9-16, or 13-16 / 1-4
* Master raise/lower brightens or dims all lighting in the selected scene
* Power up to 3 wall stations directly off 1 Grafikeye unit.
* Compatible with all new Grafikeye Units 3100/3500, Integrale and B&O series
|
|
Lutron GRAFIK Eye EGRX-8S - European 8-Scene Selector
|
|
Lutron European 8 Scene Selector for Grafikeye Integrale and 3000 models
* Grafikeye Wall station - 8 buttons for Light scene, plus all-off and raise/lower
* Select light scenes 1-8, 5-12, 9-16, or 13-16 / 1-4
* Master raise/lower brightens or dims all lighting in the selected scene
* Power up to 3 wall stations directly off 1 Grafikeye unit.
* Compatible with all new Grafikeye Units 3100/3500, Integrale and B&O series
|
|
Lutron GRAFIK Eye EGRX-4S-IR - European 4-Scene Selector IR
|
|
Lutron European 4 Scene Selector with IR Receiver, for Grafikeye Integrale and 3000 models
* Grafikeye Wall station - 4 buttons for light scene, plus all-off and raise/lower
* Select light scenes 1-4, 5-8, 9-12, or 13-16
* Master raise/lower brightens or dims all lighting in the selected scene
* IR receiver (40Hz) for Lutron remote control (not B&O IR Compatible)
* Power up to 3 wall stations directly off 1 Grafikeye unit.
|
|
Lutron GRAFIK Eye EGRX-4S - European 4-Scene Selector
|
|
Lutron European 4 Scene Selector with Raise/Lower and Off Buttons for Grafikeye Integrale and 3000 models
* Grafikeye Wall station - 4 buttons for light scene, plus all-off and raise/lower
* Select light scenes 1-4, 5-8, 9-12, or 13-16
* Master raise/lower brightens or dims all lighting in the selected scene
* Power up to 3 wall stations directly off 1 Grafikeye unit.
* Compatible with all new Grafikeye Units 3100/3500, Integrale and B&O series
|
|
Lutron GRAFIK Eye EGRX-4M - European Master Control
|
|
Lutron European Master Control for Grafikeye Integrale and 3000 models
* Grafikeye Wall station - 4 buttons for Light scene, plus 1 button for all-on, all-off
* Power up to 3 wall stations directly off 1 Grafikeye unit.
* Compatible with all new Grafikeye Units 3100/3500, Integrale and B&O series
* A single unit fits the BS Standard 35mm deep back box or the Round single Euro back box 42mm deep
Click
|
|
Lutron EGRX-2B-SL 2 Button European Wall Switch
|
|
Grafikeye Wall station - 2 buttons which has 7 selectable functions, these include:
* Entrance Wall station Function - Select Scene 1, Turns Lights off
* Scene Selection Wall station Function - Select Scene 9, Select Scene 10
* Scene Selection Wall station Function - Select Scene 13, Select Scene 14
* Panic Wall station Function - Selects scene 16 (all lighting full on), Restores previous scene
* Power up to 3 wall stations
|
|
Lutron GRAFIX Eye Plate GRX-4GRC-T-SN
|
|
This is the Lutron Grafik Eye Plate to replaces the standard white plate. Simply clip the original plate off and clip this one on. This plate can be used for all the Grafik Eye's including the 2,3,4 and 6 circuit.
|
|
Page 10
( Displaying 10 of 102 Products )
|
|
Search for products that may contain the words:
within
using