The secret to great lighting is being able to control it. Match your activity or mood to your visual environment. Set the lights as you need them and the setting is automatically saved as one of your custom scenes. Retrieve it later at the touch of a button; no individual switches or dimmers to adjust again and again. The possibilities are endless. In your living room, you can pre-set the lighting controls to suit the way that you live “Cinema”, “Homework”, “Entertaining”, “Cleaning”. Then with a hand-held remote control (or even your universal TV remote), you can change the ambience of your room without leaving your chair. You can control all the lights in one room or indeed the whole house from just one button and control natural light with a motorised window solution. You can also link the lighting controls to your security and AV systems.
Control Units have both a maximum power capacity limit per zone and a maximum power capacity limit per unit. Each zone cannot exceed the total Watts listed on the product, and each unit cannot exceed the total Watts outlined for the product. However, the maximum unit capacity can be allocated among each individual zone in the unit. For example, on a 4-zone unit at 230V with a maximum zone capacity of 800W and a maximum unit capacity of 2300W, some zones will not reach the individual zone maximum because the total unit maximum cannot exceed 2300W. Check total unit maximums before ordering
|
Page 4
( Displaying 10 of 102 Products )
|
|
|
Rako WVF-070 (WVF070) 7 Button Flat Faceplate for WCM-070
|
|
Rako Wired Lighting WVF-070 - Replacement 7 Button Flat Faceplates
Fits all Rako WCM-070 - 7 Button Keypads
Add class to a quality interior to match with mains sockets and door furniture
Flat faceplate including fixings, does not include button pad.
4 Finishes:-
White Plastic White Metal
Brushed Stainless Steel
Polished Stainless Steel
Polished Brass
Back Box Type BS Standard back box - 44mm deep
|
|
Rako WLF-030 (WLF030) 3 Button Hidden Fixing Faceplate for WCM-030
|
|
WLF-030 Replacement 3 Button Hidden Fixing Faceplates for WCM-030 includes Fixing Set
Rako Wired Lighting WLF-030 - Replacement 3 Button Hidden Fixing Faceplates
Fits all Rako WCM-030 - 3 Button Keypads
Add class to a quality interior to match with mains sockets and door furniture
Flat faceplate including fixings, does not include button pad.
5 Finishes:-
White Plastic
Brushed Stainless Steel
|
|
Rako WVF-030 (WVF030) - 3 Button Flat Faceplates for WCM-030
|
|
Rako Wired Lighting WVF-030 - Replacement 3 Button Flat Faceplates
Fits all Rako WCM-030 - 3 Button Keypads
Add class to a quality interior to match with mains sockets and door furniture
Flat faceplate including fixings, does not include button pad.
Available in 4 Finishes:-
White Metal
Brushed Stainless Steel
Polished Stainless Steel
Polished Brass
Back Box Type BS Standard back box - 44mm deep
|
|
Rako RCI-7M (RCI7M)
|
|
RCI-7M
Battery powered interface unit for up to 7 momentary volt-free switch inputs.
The RCI-7M accepts volt-free momentary switch inputs and transmits wireless Rako coded Rakom messages to other Rako wireless receiver and Bridge units. Each input can trigger an internal macro function, making the unit the ideal device for integrating third party wall-switches into a Rako environment.
Programmable
|
|
Rako RCI-4L (RCI4L)
|
|
RCI-4L
Wireless NFC programmable latching contact interface.
The RCI-4L unit is for up to 4 x 2 way latching volt-free switch inputs.
Programmable via Rako's patented NFC (Near Field Communication) technology each of the 4 inputs can trigger a single command or start a macro function making the unit the ideal device for integrating third party wall-switches into a Rako environment.
The RCI-4L is lithium battery powered and is designed to fit in a standard UK backbox.
|
|
Rako WANEX - Wired System Network Extender
|
|
NETWORK EXTENDER FOR LARGE RAKOM NETWORKS
A wired network extender that creates two linked Rakom networks.
Can be used when the maximum data cable length of 3km is
exceeded (more common when using RAK-STAR units). The WA-NEX
can also be used when site wiring prohibits the correct connection of
a daisy chain system creating a second network for a connection that
would otherwise form a spur on the network.
|
|
Rako WSR-DLI (WSRDLI)
|
|
The WSR-DLI is a wired control
module with outputs to control
15 channels of addressable DLI
fittings in a single Rako Room.
Individual DLI fittings can be
grouped to Rako channels and
the unit includes an address
recovery function allowing should
one DLI fitting need replacing.
The WSR-DLI allows a wireless Rako system to have addressable control of
Digital Addressable Light fittings. The module is complete with an 18V DC
power supply that powers the DLI network.
|
|
Rako WSRDMX
|
|
A 15 channel DMX controller
for use with the Rako Rakom
wired network. Can be used to
control DMX light fittings or
interfaces such as colour
changing LED drivers and fibre
optic projectors.
DMX CONTROL
Designed to be connected to the Rako Rakom wired network via an
RJ11 socket or punch-down Krone connector and control up to 15
channels of DMX512 compatible controllers or light fittings. The
WSRDMX is addressed as a normal dimmer channel and
automatically assigns the subsequent channels for DMX use.
|
|
Rako RLED30SLAVE
|
|
EXTENDED CONTROL
The RLED30Slave is designed to work with RLED30CV4 modules where
the length of tape exceeds the capacity of the RLED30CV4. The
RLED30Slave is fed the output signal from the RLED30CV4 and allows a
further length of tape to be controlled from the same base RLED30CV4
unit. This method of slaving is more cost effective than having multiple
RLED30CV4 units but importantly allows colour cycling to remain in sync
where multiple RLED30CV4 units may drift due to slight differences in
the internal clocks.
|
|
Rako RLED20CC3
|
|
The RLED20CC3 is a wireless (RGB) 20w/channel
constant current dimimg LED driver, suitable for ceiling
or cupboard mounting.
Designed for use with 3 channel constant current LED fittings.
Maximum wattage of 20w with a forward voltage range of 3-45V
(equates to 13 x 1w LEDs per channel). Requires a suitable external d.c.
power supply such as the Rako RAPSU48. Selectable current ratings of
350, 500, 600 and 700mA via jumper connectors.
|
|
Page 4
( Displaying 10 of 102 Products )
|
|
Search for products that may contain the words:
within
using