The history of SpeakerCraft is a story of innovation, determination and a drive to provide technology that makes a difference in the lives of their customers. From its genesis over thirty years ago as a small retail storefront the company later began producing loudspeakers for motor homes. This led to SpeakerCraft creating the first in-wall speaker. The company became an OEM manufacturer for some of the largest names in the audio business. In 1994 SpeakerCraft released a series of custom installed loudspeakers under their own brand. The key to their success was in the selection of Jeremy Burkhardt, an enthusiastic young man who had cut his teeth on the retail floor and spent countless hours selling and installing audio systems. He not only forged alliances with the top dealers in the country but he was also a major force in new product development. Through his incredible energy and determination the products and support from SpeakerCraft set new standards in the industry.
|
Page 10
( Displaying 10 of 319 Products )
|
|
|
SpeakerCraft Enclosure Extension Wings
|
|
Sound Enclosure Extension Wings
• Extension Wings Fit Sound Enclosure Models SE1612 and SE1410
• One Pair Is Enough To Mount One Enclosure
• Attaches to SpeakerCraft Sound Enclosures with Clips, Allowing Them To Be Mounted 24" On Center
• Allows Enclosures To Be Placed Into Suspended Ceilings
NOTE: Wings Will Only Fit Enclosures with “Clips”.
|
|
SpeakerCraft SE1612 LCR3 In-Wall Sound Enclosure
|
|
• Overall Dimensions - 14 3/8" x 12" (365mm x 305mm)
• The enclosure provides one hour fire break protection.
• The enclosure will reduce the sound travel between the wall into adjacent up to 10db.
• The enclosure will provide a template for the drywall cut-out leaving a perfect location for mounting the speakers.
• The air volume inside the enclosure is ideal for most 6 1/2” two-way in-wall speaker
systems.
|
|
SpeakerCraft Fire Hood 250mm x 250mm
|
|
• Cover for recessed luminaires when a fire ceiling is being penetrated
• In the event of a fire, the intumescent -material maintains the fire rating of the ceiling
• Provides acoustic damping
• Fire hoods may be installed from below the ceiling
• Sold singularly
** Suitable for all 8" speakers **
Width: 250mm
Length: 250mm
Height: 250mm
|
|
SpeakerCraft Fire Hood 180mm x 200mm
|
|
• Cover for recessed luminaires when a fire ceiling is being penetrated
• In the event of a fire, the intumescent - material maintains the fire rating of the ceiling
• Provides acoustic damping
• Fire hoods may be installed from below the ceiling
• Sold singularly
** Suitable for all 5" speakers - maximum cut out size 180mm **
Width: 180mm
Length: 180mm
Height: 200mm
|
|
SpeakerCraft Profile AccuFit Ultra Slim Three
|
|
Profile AccuFit Ultra Slim Three
Two 3" Custom Aluminum Cone Woofers
Two 3" Custom Aluminum Dome Midrange Drivers
¾" Aluminum Dome Tweeter
Shallow-Depth, Ported, Magnetically Sealed Steel Enclosure
Timbre-Matched to All Three Series Speakers
Sensitivity: 90dB 1W/1m
Power Handling: 60 Watts
Impedance: 8 Ohms
Frequency Response: 90Hz - 20kHz
STL (Sound Transmission Loss) Feature*
Diameter x Depth: 9 15/16" x 1 15/16" (252 mm x 50 mm)
|
|
SpeakerCraft Profile AIM 8 Wide THREE
|
|
The AIM Wide Three is a fully pivoting in-ceiling speaker, featuing dual 3/4" Aluminium dome tweeters, dual 2" aluminium cone woofers, Independently pivoting
and rotating 8" Aluminum Cone Woofer mounted in an assembly that allows the woofer to be pointed as desired. The AIM Wide Three has an 8ohm compatible, as well as 91dB 1W/1m sensitivity.
Front mounted treble switch allows the treble to be set at one of 3 positions: -3dB, flat, +3dB, front mounted Wide/Ambient switch.
|
|
Page 10
( Displaying 10 of 319 Products )
|
|
Search for products that may contain the words:
within
using