The history of SpeakerCraft is a story of innovation, determination and a drive to provide technology that makes a difference in the lives of their customers. From its genesis over thirty years ago as a small retail storefront the company later began producing loudspeakers for motor homes. This led to SpeakerCraft creating the first in-wall speaker. The company became an OEM manufacturer for some of the largest names in the audio business. In 1994 SpeakerCraft released a series of custom installed loudspeakers under their own brand. The key to their success was in the selection of Jeremy Burkhardt, an enthusiastic young man who had cut his teeth on the retail floor and spent countless hours selling and installing audio systems. He not only forged alliances with the top dealers in the country but he was also a major force in new product development. Through his incredible energy and determination the products and support from SpeakerCraft set new standards in the industry.
|
Page 23
( Displaying 10 of 319 Products )
|
|
|
SpeakerCraft CRS6 One In-Ceiling Speaker
|
|
Wide Dispersion In-Ceiling. Silk Dome Pivoting Tweeter. Polypropylene Bass.
Features
6-1/2" Polypropylene Cone Woofer with Rubber Surround
Pivoting 1" Liquid Cooled Silk Dome Tweeter with Neodymium Magnet
Timbre-Matched to AIM8 One, CRS8 One, MT8 One and MT One
Efficiency: 92dB 1W/1m
Power Recommendations: 5 - 100 watts (undistorted)
Impedance: 8 OHMS
Frequency Response: 40Hz - 20kHz ±2dB
Diameter x Depth: 9-13/16" x 4"
|
|
SpeakerCraft CRS6 Three In-Ceiling Speaker
|
|
Wide Dispersion In-Ceiling. Aluminium Pivoting Tweeter. Aluminium Bass.
Features
6-1/2" Aluminum Cone Woofer with Dual Voice Coil and Rubber Surround
Pivoting 1" Liquid Cooled Aluminum Dome Tweeter with Neodymium Magnet
Front mounted switches allow for up to ±3dB of Bass and Treble adjustment
Timbre-Matched to AIM8 Three, CRS8 Three, MT8 Three and MT Three
Efficiency: 90dB 1W/1m
Power Recommendations: 5 - 125 watts (undistorted)
|
|
SpeakerCraft CRS6 Four In-Ceiling Speaker
|
|
Wide Dispersion In-Ceiling. Magnesium Pivoting Tweeter. 6" Aluminium Bass.
6-1/2" Aluminum/Magnesium Cone Woofer with Dual Voice Coil and Rubber Surround
Pivoting 1" Aluminum/Magnesium Dome Tweeter with Neodymium Magnet
Front mounted switches allow for up to ±3dB of Bass and Treble adjustment
Timbre-Matched to AIM8 Four, CRS8 Four, MT8 Four and MT Four
Efficiency: 90dB 1W/1m
Power Recommendations: 5 - 150 watts (undistorted)
|
|
SpeakerCraft CSS6 One Square In-Ceiling Speaker
|
|
Wide Dispersion Square In-Ceiling. Silk Pivoting Tweeter. Polypropylene Bass.
Features
Speaker Type: 2-Way In-Ceiling
Tweeter: Pivoting 1" Silk Dome
Woofer: 6 1/2" Polypropylene Cone with Filleted Rubber Surround
Impedance: 8 ohm
Sensitivity: 92dB 1w/1m
Frequency Response: 40Hz - 20kHz ± 2dB
Power Recommendations: 100 watts (undistorted)
Size x Depth: 8 3/4 " x 8 3/4 " x 3 3/4 "
Ceiling Cut Out: 7 1/8" x 7 1/8"
|
|
SpeakerCraft CSS6 Three Square In-Ceiling Speaker
|
|
Wide Dispersion Square In-Ceiling. Aluminium Bass And Pivoting Tweeter.
Features
Speaker Type: 2-Way In-Ceiling
Tweeter: Pivoting 1" Aluminum Dome
Woofer: 6 1/2" Aluminum Cone with Dual Voice Coil & Filleted Rubber Surround
Impedance: 8/6 ohm depending on switch settings
Sensitivity: 90dB 1w/1m
Frequency Adjustments: Front-Mounted 3 Position ±3dB Treble Adjustment Switch & ±3dB Bass Adjustment Switch
Frequency
|
|
SpeakerCraft AIM8 Two In-Ceiling Speaker
|
|
Aim-able In-Ceiling. Pivoting 8" Fibreglass Bass And 1" Silk Dome Tweeter.
Features
Pivoting and Rotating 8" Resin Reinforced Fiberglass Cone Woofer
Pivoting 1" Treated Silk Dome Tweeter
Front mounted switch allows for up to ±3dB of Treble adjustment
Timbre-Matched to CRS8 Two, CRS Two, MT8 Two and MT Two
Efficiency: 89dB 1W/1m
Power Recommendations: 5 - 100 watts (undistorted)
Impedance: 8 OHMS
Frequency
|
|
SpeakerCraft AIM8 Three In-Ceiling Speaker
|
|
Aim-able In-Ceiling. Pivoting 8" Aluminium Bass And 1" Aluminium Tweeter.
Features
Pivoting and Rotating 8" Aluminum Cone Woofer
Pivoting 1" Aluminum Dome Tweeter
Front mounted switches allow for up to ±3dB of Bass and Treble adjustment
Accu-Grille dramatically reduces unwanted acoustic reflections
Timbre-Matched to CRS8 Three, CRS Three, MT8 Three and MT Three
Efficiency: 89dB 1W/1m
Power Recommendations: 5 - 100 watts (undistorted)
|
|
SpeakerCraft AIM8 Four In-Ceiling Speaker
|
|
Aim-able In-Ceiling. Pivoting 8" Magnesium Bass And 1" Magnesium Tweeter.
Features
Pivoting and Rotating 8" Aluminum/Magnesium Cone Woofer
Pivoting 1" Aluminum/Magnesium Dome Tweeter
Front mounted switches allow for up to ±3dB of Bass and Treble adjustment
Accu-Grille dramatically reduces unwanted acoustic reflections
Timbre-Matched to CRS8 Four, CRS Four, MT8 Four and MT Four
Efficiency: 90dB 1W/1m
Power
|
|
SpeakerCraft AIM8 Five In-Ceiling Speaker
|
|
Aim-able In-Ceiling. Pivoting 8" Kevlar Bass And 1" Aluminium Tweeter.
Features
Pivoting and Rotating 8" Kevlar Cone Woofer
Pivoting 1" Aluminum/Magnesium Dome Tweeter
Front mounted switches allow for up to ±3dB of Bass and Treble adjustment
Accu-Grille dramatically reduces unwanted acoustic reflections
Efficiency: 91 dB 1W/1m Power Recommendations: 5 - 100 watts (undistorted)
Impedance: 8/6/4 OHMS depending on switch settings
|
|
SpeakerCraft QIX-1.0 Quad IR Extension Cable
|
|
SpeakerCraft SmartPath 15 Foot 3.5mm Quad Plug To Quad Socket Cable. Smart Path IR Receiver Extension Lead.
SPECIFICATIONS
* 4.5M, 3.5mm Quad mini phone plug, fits 3.5mm Quad mini phone jack
* Provides a quick means to extend the lead length of SpeakerCraft IR Receiver leads equipped with the Quad (4-circuit ) 3.5mm mini plug
* Dimensions: L=4.5M
|
|
Page 23
( Displaying 10 of 319 Products )
|
|
Search for products that may contain the words:
within
using