The history of SpeakerCraft is a story of innovation, determination and a drive to provide technology that makes a difference in the lives of their customers. From its genesis over thirty years ago as a small retail storefront the company later began producing loudspeakers for motor homes. This led to SpeakerCraft creating the first in-wall speaker. The company became an OEM manufacturer for some of the largest names in the audio business. In 1994 SpeakerCraft released a series of custom installed loudspeakers under their own brand. The key to their success was in the selection of Jeremy Burkhardt, an enthusiastic young man who had cut his teeth on the retail floor and spent countless hours selling and installing audio systems. He not only forged alliances with the top dealers in the country but he was also a major force in new product development. Through his incredible energy and determination the products and support from SpeakerCraft set new standards in the industry.
|
Page 28
( Displaying 10 of 319 Products )
|
|
|
SpeakerCraft VCR120 Volume Control
|
|
In-Wall Speaker-Level Volume control. Power Handling 120W RMS
SpeakerCraft has created a range of in-line speaker-level volume controls for all distributed audio applications.
The VCR-120 is a high power 120W volume control utilising simple connect terminals that do not require the use of a screw driver.
Utilising a continuously variable resistor, the VCR-120 permits a more precise control of volume than the 12-step arrangement found in the VST models.
|
|
SpeakerCraft VST45 Volume Control
|
|
In-Wall Speaker-Level Volume control. Power Handling 45W RMS
SpeakerCraft has created a range of in-line speaker-level volume controls for all distributed audio applications.
The VST-45 is a 45W volume control utilising LiftLock™ connectors for simple cable termination.
Based around a single-gang J-box plate, the VST-45 can be used with numerous Decora™ style face plates.
SPECIFICATIONS
A white plate and knob is included as standard.
|
|
SpeakerCraft VSI45 Volume Control
|
|
In-Wall Impedance-Matching Speaker-Level Volume control. 45W RMS
SpeakerCraft has created a range of in-line speaker level volume controls for all distributed audio applications.
The VSI-45 is a 45W volume control utilising LiftLock™ connectors for simple cable termination. The VSI-45 is also designed so that you may run multiple pairs of speakers without damaging your amplifier or receiver. Impedance adjustment is made via a switch that can be used even after the control is mounted to the wall.
|
|
SpeakerCraft LL-One Switcher
|
|
Automatic Line Level Switcher. Share Two Stereo Sources Between One Input.
The LL-One is an audio-sensing line-level switcher that replaces manually operated A/B switches by permitting automatic switching of two stereo line-level (source or preamp) outputs between one line-level (preamp or power amp) input.
The LL-One’s numerous applications make the integration and operation of custom installations easier and more intuitive. For instance, use the LL-One for the automatic switching of stereo power amplifier, between a local A/V controller and multi-room preamplifier; or as an automatic audio input expander where two line level sources are connected to one line level input.
|
|
SpeakerCraft IRE-5.0 Emitter
|
|
High Output Blaster / Flood Emitter. Use with AT1.0.
The IRE-5.0 IR Blaster is a unique wand-shaped device containing two very high output IR emitters.
The Blaster wand is designed in such a fashion as to allow the correct overhang, installer adjusted, for control of a stack of A/V components. It can be mounted above or below the components, or both, to ensure good coverage.
The IRE5.0 can be located opposite the controlled equipment up to 35 feet away for ‘across the room’ operation, where conditions permit.
|
|
SpeakerCraft ILC-1.0 Light Collector
|
|
Light Collector (Ideal with IRE-5.0) (Pack of 10)
Designed for use with the IRE-5.0 IR Blaster, the Light Collector is a simple and ingenious piece of lateral thinking.
With flood IR emissions, the placement of the blast emitter(s) is critical: if products are slightly off-axis the commands can be missed.
The ILC-1.0 is a small IR-transparent unit with built-in angled mirrors, which will pick up vertically transmitted commands and reflect them into the IR receiver of the required component.
|
|
SpeakerCraft IRE-4.0 Dual IR Emitter
|
|
Dual Blink Emitter. EZ-Dock. Slide On/Off Mounting.
The IRE-4.0 is the dual emitter version of the IRE-3.0.
It features a unique EZ-Docker plate that permits the instant removal of the emitter when re-arranging or servicing components. It flashes red when emitting IR control signals.
The IRE-4.0 has 75% lower IR output than non-visible emitters and therefore should be used when controlling multi-zone components to avoid cross-zone interaction.
|
|
SpeakerCraft IRE-2.0 Emitter
|
|
Dual Non-Blink Emitter. EZ-Dock. Slide On/Off Mounting
The IRE-2.0 is the dual emitter version of the IRE-1.0.
It features a unique EZ-Docker port that permits the instant removal of the emitter when re-arranging or servicing components. An improved adhesive reduces service calls for re-attachment of ‘fallen emitters’.
The case may also be taken apart so that the tiny internal emitter can be placed inside a component, when desired. High IR output from the top curved surface allows emitter to be mounted on a nearby surface, below, above or on a cabinet door, rather than directly on the sensor of the unit where conditions permit.
|
|
SpeakerCraft IRE-3.0 Emitter
|
|
Single Blink Emitter. EZ-Dock. Slide On / Off Mounting.
The IRE-3.0 represents the highest level in sophistication for attachable IR emitters.
It features a unique EZ-Docker port that permits the instant removal of the emitter when rearranging or servicing components. It flashes red when emitting IR control signals.
The IRE-3.0 has a 75% lower IR output than non-visible emitters and therefore should be used when controlling multi-zone components to avoid cross-zone interaction.
|
|
SpeakerCraft IRE-1.0 Emitter
|
|
Single Non-Blink Emitter. EZ-Dock. Slide On/Off Mounting
The IRE-1.0 represents the highest level in sophistication for attachable IR emitters.
It features a unique EZ-Docker port that permits the instant removal of the emitter when re-arranging or servicing components. An improved adhesive reduces service calls for re-attachment of ‘fallen emitters’. The case may also be taken apart so that the tiny internal emitter can be placed inside a component, when desired.
|
|
Page 28
( Displaying 10 of 319 Products )
|
|
Search for products that may contain the words:
within
using