|
Page 1
( Displaying 10 of 35 Products )
|
|
|
Rako RAVIR Interface
|
|
IR to RF Interface. Use Any Learning Remote To Operate Rako Modules.
The elegance of any Rako system is demonstrated not only by its simplicity of operation, but also by the number of control options available. The RAVIR is one such option, allowing the use of any standard learning remote control to operate your Rako lights as well!
The RAVIR will convert standard Infra Red commands into RAKO RF commands. This can be achieved either through a dedicated IR receiver or as part of an IR control system, such as those designed by SpeakerCraft.
|
|
Rako RX-Link Module
|
|
RF Receiver Module For RAK4 System.
This compact RF receiver is an integral part of a RAK4 system.
Connecting via Cat 5 cable, the RX-Link is capable of controlling up to four interlinked RAK4 modules.
Utilising Rakom coded RF control, an RX-Link will detect and relay RF commands from all Rako interfaces. These can include RCP keypads, RAV232 modules, the RAVIR, and RAVFR volt-free module.
SPECIFICATIONS
|
|
Rako RASOFT
|
|
Combination Of RAV232 & RASOFT Software.
In most applications each Rako module can be configured by either a keypad or remote. However there are instances in which an installation will require the capability of the RAV232 serial control interface.
The RAV232 is a dedicated RS232 to RF unit, capable of converting ASCII commands into Rako RF commands for full control of any Rako module. Through the RAV232, any control device capable of outputting ASCII commands can fully control a Rako lighting system.
|
|
Rako RADMX Interface
|
|
Rakom RF To DMX Interface. 8 x DMX512 Channels
The Rako RADMX is a Rakom RF to DMX interface.
The unit provides for the output of eight DMX512 channels and is designed to control DMX light fittings such as moving lights, colour changes, and three-colour LEDs.
The RADMX can be controlled and configured using either the RCP07 control panels, or via the RASOFT programming software.
Modules are fitted with an internal aerial. For control distances greater than 15 metres, the external aerial (supplied) can be fitted.
|
|
Rako RAB100 Booster Unit
|
|
RF Booster Unit 100m Range. Plug & Play. RF Receive & Re-Transmit.
Although each RCP07 keypad and RAH07 remote control have a very conservatively specified indoor range of 15m, there are instances when this may need to be extended.
The RAB100 is an all-house-room-channel, receive and re-transmit unit, capable of sending Rako RF commands up to 100m from their control point.
Using its plug-and-play design, you simply choose a convenient mid-point location, within 15m of the keypad, and plug the unit into any available mains socket.
|
|
Rako RAIPC Controller
|
|
Intelligent Partition Controller. Reconfigure Light Control By Contact Closure.
Designed originally for the commercial market, the Intelligent Partition Controller has many applications within a domestic environment.
When an office or other commercial space is partitioned, an IPC device permits control over the lighting that specifically addresses the areas either side of a partition.
The same effect can be useful within a domestic environment, and made easier to implement through Rako’s totally wireless control.
|
|
Rako RAVFR Interface
|
|
Volt-Free To RF Interface. Activation Of Lights By Simple Contact Closure.
Any door can become a light switch!
Rako’s RAVFR makes this radical idea a reality. Simply by opening or closing a door, your lights can turn on or off.
If you have ever fumbled in the dark for a light switch, the RAVFR is the perfect solution. Illuminate the cupboard under the stairs by simply opening the door; the internal garage door can activate lights in a similar way. With the RAVFR installed, your lights will come on and stay on for whatever pre-determined period you require.
|
|
Rako RAV-LC (RAVLC)
|
|
Rako Wireless Lighting RAVLC - Living Control Interface
Features:
Rako Wireless Lighting Control RAVLC - Living Control Interface. Used with Living Controls Multi-Room Audio System
Utilise your Living Control RoomBox 6 to activate lights, curtains, and blinds
Connects directly into the RoomBox 6 CPU and transmits the required activation commands directly to each Rako module.
In addition, pre-defined IR commands are available, enabling you to use a standard learning remote control to operate your Rako controlled lights. All scenes and selections are supported
|
|
Rako RAV232 Plus
|
|
Bi-Directional RS232 Interface. Control Feedback From Each Room
In most applications, each Rako module can be configured by either a keypad or remote. However there are instances in which an installation will require the capability of the RAV232 or RAV232 Plus serial control interfaces.
The RAV232 Plus is a complete two-way RS232 to RF and RF to RS232 unit.
Much like the standard RAV232, the RAV232 Plus is capable of converting ASCII commands into Rako RF commands for the full control of any Rako module. In addition, the RAV232 Plus constantly monitors every activity within a given Rako system. Every scene change and all Rako module activity is received by the RAV232 Plus and converted into ASCII commands.
|
|
Rako RAV232
|
|
RS232 To RF Interface & Programming Unit 9 PIN D Type Connector.
In most applications each Rako module can be configured by either a keypad or remote. However there are instances in which an installation will require the capability of the RAV232 or RAV232 Plus serial control interfaces.
The RAV232 is a dedicated RS232 to RF unit, capable of converting ASCII commands into Rako RF commands for full control of any Rako module. Through the RAV232, any control device capable of outputting ASCII commands can fully control a Rako lighting system.
|
|
Page 1
( Displaying 10 of 35 Products )
|
|
Search for products that may contain the words:
within
using