A compact single channel 75W
constant voltage LED dimmer
with in-built RF receiver and
Rako processor for control of
single channel constant voltage
LED fittings.
Controlled from any Rako
Rakom device, e.g. RCP/RCM
wall plates or Bridge interface
units.
Designed for use with single channel constant voltage LED fittings and
single channel LED tape light.
Maximum wattage of 75w for 12V d.c. fittings or 150w for 24V d.c.
fittings. Requires a suitable external d.c. power supply (normally the
power supply that would be supplied with the fitting for a non-dimming
application).
Programmed using either an RCM/RCP RF wallplate or the RASOFT PC
software suite, the unit stores the house, room and channel address plus 16 preset scene levels in non volatile memory.
The RLED75CV1 dimmer can be controlled from any Rako transmitter
such as RCM/RCP wallplates, RAH hand helds and Bridge modules
and forms the foundation of any Rako scene-set system.
Specifications:-
dimensions 138x46x40mm
input supply 12 or 24vDC
weight 125g
housing UL V0 ABS
climate range Temperature +2C to +40C
Humidity +5% to 95% non
condensing
connections 2 way screw terminals for 12-24v
d.c. supply.
4 way screw terminals for load
connections.
protection Reverse polarity input protection.
Output current limit protection.
load types Single channel constant voltage LED
fittings and tapelight.
minimum load 1w
maximum load 75w @ 12v d.c.
150w @ 24v d.c.
terminal sizes 4mm2
standards Emissions - EN61000-6-3 : 2001
Immunity - EN61000-6-1 : 2001
communication Rakom coded fm radio, 433.9MHz
memory Flash memory non volatile