The RMR-VF is an interface unit to convert volt-free
contact signals into Rako wireless RAKOM messages.
The RMR-VF accepts up to 10 volt-free inputs which can be used to trigger
multiple scenes within a single room or separate commands in different
rooms. Commands can be scenes, fades, levels or multiple actions
depending on the duration of the contact closure.
The RMR-VF can be addressed manually to a single Rako Room and inputs
will trigger basic scenes within that Room. Rasoft Pro is required (with a
suitable programming interface e.g. RABridge) to map commands to
different or multiple rooms and action advanced functions such as Level,
Press and Hold and Trigger on Release.
Note: The RMR-VF is not intended for use with PIR or other presence
sensors. For these sensors the RAMVR should be used – contact Rako's
technical helpline for more information.
v
Technical Specifications:-
Dimensions: 190x105x66mm
Input supply: 9-12V DC from SELV power supply
unit (included)
Weight: 340g
Housing: UL V0 ABS
Climate range: Temperature +2C to +40C
Humidity +5% to 95% non
condensing
Standards: Emissions - EN61000-6-3 : 2007
Immunity - EN61000-6-1 : 2007
LVD - EN 60950-1 :2006
Communication: Rakom coded fm radio, 433.9MHz
Memory: Flash memory (non volatile)