SA1000
The SA1000 is a custom amplifier solution, optimized for the highest level of performance and reliability. This rackmount amplifier includes user features on the front panel, and a custom installer focused feature set on the rear panel. As part of Revel's in-wall subwoofer system, this rack mountable Class D component is designed to power the B28W in-wall subwoofer.
The SA1000 single channel, rack mount amplifier has two outputs in parallel, so you can power one B28W subwoofer module with 350W RMS (750W Peak). When a second B28W subwoofer module is connected to the second output of the SA1000 amplifier, the total output power increases to 700W RMS (1500W Peak).
This complete in-wall subwoofer solution with external rack mountable amplifier is designed to complement Revel’s high-performance architectural product portfolio. It delivers dynamic bass and lifelike realism to concealed music and home cinema systems resulting from Revel’s advanced engineering prowess, and comprehensive subjective and objective measuring tests.
Highlights:-
User-adjustable Single-band PEQ – Room Equalization
Short-circuit and over-current protection
Over-temperature compensation
Two dual-banana output connectors for easy connection
Completes in-wall/in-ceiling solutions for music and home theater systems
Connect up to two B28W Subwoofers with each SA1000 Amplifier
Designed to fit standard 2 x 4 stud frame construction
Self-contained subwoofer module with integrated back-box allows for easy retrofit installations
Technical Specifications:-
Model:
SA1000
Description:
Amplifier
Rated Output Power (RMS) into the minimum impedance of 4 Ohms:
700 Watts (350W per Subwoofer)
Peak Power:
1500 Watts (750W per Subwoofer)
Rated Impedance:
8 Ohms per speaker output
Minimum load Impedance:
4 Ohm
Model-Specific EQ 1:
Only for Revel B28C; 2: Only for Revel B28W
Input Sensitivity to 1W @ 50Hz:
16.3mVrms +/- 1dB (Single input driven) Gain = 41.7dB
Input Overload (Both inputs driven):
2.0Vrms
Input Impedance:
> 10K Ohms
Low Pass Crossover Range:
50-150Hz
Auto Turn On Input Sensitivity @ 50Hz:
Typical 10mV
THD+N at 1W:
< 0.3%
THD+N at Rated Output Power:
< 1%
Signal-to-Noise ratio to 1W:
> 65dBA
Minimum AC Mains power requirements:
Model: 700W, 5A – 100-120VAC-50-60Hz Model: 700W, 3A – 230VAC-50-60Hz
Power consumption (Standby):
0.5W
Height:
3.50in (88.90mm)
Width:
17in (431.8mm)
Depth:
11.04in (280.3mm)
Weight:
14 lb (6.35kg)
Accessories