Wyrestorm Single Cat5e/6/7 HDBaseT Lite HDMI receiver 70m PoH (no PSU required included) 4k
The perfect compliment to the MX-0808-PP-POH-4K matrix switcher, the RX-70-4K ultraHD, ultra slim display receiver supports 4K video up to 70m/230ft and 1080p/48bit @60Hz to 100m/328ft.
HDBaseT 5-Play™ compliance offers, HD video, HD audio, bidirectional control via IR and RS232, two-way PoH remote power of devices power and Ethernet passthrough, all wrapped up in an impossibly thin chassis for an ease of installation that represents unrivalled function, flexibility and reliability for residential or commercial applications of any kind.
Pushing technology and design to the limit, the RX-70-4K display receiver brings 5-Play™ compliance to long distance 4K HDBaseT distribution and control within an incredibly low profile chassis of just 18mm for a greatly reduced form factor behind even the slimmest wall plates to make installation a dream.
Designed to be used as part of an MX-0808-PP-POH-4K matrix integration, the RX-70-4K receiver features the same powerful Class A HDBaseT technology and a full 5-Play™ feature set including 100m/328ft transmissions of 1080p@60Hz 48bit Deep Color video, HD audio, discrete two-way control via IR and RS232, Ethernet passthrough and 100W remote power to display zones all along a single Cat5e/6 cable.
UltraHD 4K transmissions from an MX-0808-PP-POH-4K matrix or compatible transmission device are supported up to 70m/230ft over Cat6 at 30Hz / 24bit with a 4K chroma sub-sampling colour palette of 4:2:2 for the optimal 4K pixel management to bandwidth balance to satisfy HDMI 1.4v standards.
Including serial control support from the MX-PP-POH-4K matrix with compatibility with leading control systems and switchable RS232 selection for firmware updates, the RX-70-4K draws power remotely from the matrix, but also offers improved 12v power connectivity via phoenix port and threaded DC power port for standard and locking DC power plugs.
Signal and device activity is illustrated by panel LED indicators for power supply, signal status for established display connection, Link for confirmed HDBaseT connection between matrix/receiver and HDCP presence in signal - all giving instant visual confiramtion of operational status and helping to identify potential issues.
WyreStorm 4K HDBaseT solutions offer the features, flexibility and compatibility demanded by modern integrations while future-proofing for tomorrow, combined with an ease of use and cost-efficiency for reliable distribution and control of digital content over distance whether in a residential or commercial setting.
•Low profile chassis of 18mm / 0.7” for easier, more convenient installations behind screens at display zones
•Receives HDMI transmissions from compatible device using single cable Cat5e/6 cable under recommended conditions*:
- 70m/230ft: 3840 (UHD) 4096 (DCI) 2160 4K video@30Hz / 24bit True Colour with Chroma subsampling 4:2:2
- 100m/328ft: 1920x1080p HD video@60Hz / 48bit Deep Colour
•Transmits discrete wide-band two-way IR control signal / routed serial commands (from compatible matrix) together within the HDMI signal over a single Cat5e/6
•Robust Class A HDBaseT transmission technology for stable 4K/HD distribution and control resistant to electrostatic and environmental interference compared to conventional UTP transmission
•5-Play™ support - distribution of video (4K & 1080p), multichannel audio, two-way IR, 100w power and 10/100 Ethernet over single Cat5e/6
•Multichannel audio supports 7.1 DTS Master HD and Dolby True HD
•One-way PoH (Power over HDBaseT) - Receiver draws power from matrix so no local power required at display location
•Supports all high definition resolutions: 4K, 1080p, 1080i, 720p with screen refresh rates support of 24Hz, 30Hz (4K) 50Hz, 60Hz (1080p)
•HDMI v1.4 with HDCP
•Full 3D compatibility up to 1080p - frame packing/sequential (Blu-ray) and interlaced stereoscopic (satellite/ cable broadcasts)
•Switchable RS232 selection for firmware update
•Cascadable up to 7 times within a single output zone (using EX-70-4K Transmitters)
•Power options - additional phoenix port and threaded DC for use of both standard and locking DC power plugs
•Visual LED indication for power supply, signal status to show display connection, HDCP in signal and Link between HDBaseT devices
•Cable termination follows IEEE-568B standards
•Automatically adjusts feedback, equalization and amplification of signal
•Energy efficient universal power supplies included
•Mounting brackets and IR connections included
*Recommended transmission conditions - cable run within specified distance range of product, no electrical interference, the use of straight cable runs with no bends or kinks and no patch panels or wall outlets used. Please be advised that the presence of any of these factors in your installation may compromise bandwidth and signal strength.
In the Box:
1 x WyreStorm RX-70-4K Display Receiver
1 x 12V/1.5A DC power supply
1 x 3.5mm Phoenix male connector (2 pin)
1 x 3.5mm Phoenix male connector (3 pin)
1 x Wide-band IR Emitter
1 x Wide-band IR Receiver (30-50KHz)
1 x Pair of RX-70-4K mounting brackets
1 x Printed Quickstart guide (quickstart and full manual downloadable from product page)
Specification:-
Dimensions (WxHxD): 172mm × 18mm × 94mm / 6.7” x 0.71” x 3.7” (depth excludes connectors)
Weight (Kg): 400g/14.1oz (each)
Operating Temperature Range: 32°F to 95°F (0°C to 35°C) 10% to 90%, non-condensing
Operating Humidity Range: -4°F to 140°F (-20°C to 70°C) 10% to 90%, non-condensing
Video Amplifier Bandwidth: 6.75Gbps
Transmission distance: 4K: 70m (230ft) / 1080p: 100m (328ft)
Audio Format Supported: Multichannel digital audio supporting 7.1 DTS Master HD and Dolby True HD
Power Supply: Optional 12V DC 2A (Receiver PoH powered from Transmission device)
Power Consumption: Less than 11.8W (Pair)
Rack Space Required: N/A
Input: 1 x HDBaseT
Input Signal Type: Receiver: HDBaseT
Input Resolution Support: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p @ up to 60Hz, 3840x2160 @ 30Hz, 4096 x 2160 @ 30Hz
Input Video Level: 0.5 - 1.2V p-p
Input DDC Signal: 5 volts p-p (TTL)
Output: 1 x HDMI Out
Output Signal Type: HDMI 1.4a with 4K
Output Resolution Support:
DTV/HDTV: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p @ up to 60Hz, 4K (UDH & DCI)
VESA:
640x480, 800x600, 1024x768, 1280x1024, 1600x1200, 1920x1080p @ up to 60Hz 1920x1200, 3840x2160 @ 30Hz, 4096 x 2160 @ 30Hz
Video Impedance: 100Ω
Maximum Pixel Clock: 297MHz
3D: Frame packing/sequential (Blu-ray), Interlaced stereoscopic (satellite/cable broadcasts)
ESD Protection: ±8 kV (Air-gap discharge) ±4 kV (Contact discharge)
Surge Protection: Voltage: ±1 kV (Ten times respectively positive / negative voltage)
Electrical Fast Transient/Burst: Data communication cord:1 kV Power cord : 2 kV
Certification: CE, FCC, RoHS
CABLE SPECIFICATION
Cat5e/6
100m/328ft: 1080p/36bit @ 60Hz, 1080p/48bit @ 60Hz , 1080p @ 60Hz 3D
70m/230ft: 4K @ 30Hz / Chroma sub rate 4:2:2, 4K @ 30Hz
Cat6a/7
70m/230ft: 1080p/36bit @ 60Hz, 1080p/48bit @ 60Hz, 1080p @ 60Hz 3D, 4K @ 30Hz / Chroma sub rate 4:2:2