| Page 1 / 2 | [ 1 | 2 | NEXT ] |
| Chord Chordette Toucan | |
|
|
|
| Sugden Masterclass HA-4 (HA4) Headphone Amplifier | |
|
The HA-4 has the ability to recreate all types of music in dynamic, detailed, transparent and harmonic performance, with every nuance retained. Euphonic performance which will enthuse and encourage the listener to enjoy Simply More Music. |
| Earmax Silver Edition Valve Headphone amplifier | |
|
With the exception of the valves this product is covered by a 3 year warranty. |
| Creek OBH21SE Headphone Amplifier | |
|
Direct replacements for the successful OBH-11/11SE these latest headphone amplifiers from creek have been restyled with a brushed silver front panel and increased case depth, to keep in style with the rest of the Creek family of products. Both amplifiers now feature two headphone sockets. The OBH-21 is a minature audio amplifier, designed specifically to drive two pairs of low to medium impedance (30ohm-300ohm) headphones from a line level source. The OBH-21SE is a high-end version using more expensive components and (OBH-2) power supply. It is more efficient to have a small amp to do this rather than waste the power of a full size one when only driving headphones. |
| Creek OBH21 Headphone Amplifier | |
|
Direct replacements for the successful OBH-11/11SE these latest headphone amplifiers from creek have been restyled with a brushed silver front panel and increased case depth, to keep in style with the rest of the Creek family of products. Both amplifiers now feature two headphone sockets. The OBH-21 is a minature audio amplifier, designed specifically to drive two pairs of low to medium impedance (30ohm-300ohm) headphones from a line level source. The OBH-21SE is a high-end version using more expensive components and (OBH-2) power supply. It is more efficient to have a small amp to do this rather than waste the power of a full size one when only driving headphones. |
| Creek OBH-11 Headphone Amplifier | |
|
The OBH-11 is compatible with any source at line level. For example: an average output level CD player can be connected directly to the input of the OBH-11, just as it could also be used in conjunction with a stand-alone pre-amplifier or integrated amplifier which doesn't have a headphone output. |
| Stax SRM-727II | |
|
A newly designed front panel with rounded corners in brushed finish. The electrostatic method is a playback method which involves the installation of drive electrodes on either side of a high-polymer film diaphragm with a thickness of only a few microns into each of which a plus signal and a minus signal are fed. This means that XLR connection with a pure balance output CD player makes it possible to listen to the original sound permitted by the balance system without a conversion circuit. |
| ERGO Amp 2 Headphone Amplifier | |
|
The ERGO AMP 2 headphone amplifier distinguishes itself with its excellent reproduction-quality and functional fashionable design. The sound-quality is optimised with the Class A circuit and the Power- reserves guarantees a musical pleasure, free of distortion. The ERGO AMP 2 has been developed for the ERGO A.M.T. headphones, which have been used for the fine tuning in a time span of over two Years and many hour long listening sessions. |
| Lehmann Audio Rhinelander Headphone Amplifier | |
|
The Rhinelander will find its place in the highly competitive group of ambitioned budget conscious audiophile listeners. Available Now! |
| Cary Xciter Integrated Headphone Amplifier | |
|
Although it may be small in physical size, it is imbued with the full spirit of Cary Audio. Its five watts per channel in class A triode mode plays much bigger than one might expect, and its sublime musicality is just what you would expect from Cary Audio. There is a standard quarter-inch diameter, three-circuit headphone output jack located conveniently on the front panel to pipe the music to your favorite set of cans. The circuitry is optimized to provide a good match for all high quality headphones from four to 400 ohms. |
| Musical Fidelity V-CAN Headphone Amplifier | |
|
The V-CAN is a genuine state-of-the-art headphone amplifier. Most high quality headphones have impedance of around 30 Ohms. Almost all headphone amps have an output impedance between 50 and 100 Ohms. Because of their high output impedance they cannot drive headphones properly. Any sound they produce through the headphones is necessarily coloured, with distortion and non linear frequency response. The V-CAN is quite different. It's output impedance is 5 Ohms. This means it will drive any headphone available with ease. It will produce low distortion, ruler flat frequency response and complete linearity. |
| Graham Slee Novo Discrete Headphone Amplifier | |
|
Whether you believe in global warming or not energy costs are rising at a terrifying rate, but as every audio enthusiast knows - leaving equipment on keeps it "burned in" and ready for action. |
| Lehmann Audio Black Cube Linear USB | |
|
Features: - Class-A output stage with zero global feedback - excellent sonic performance - USB-input for computers from USB 1.0 and upwards, works with sample rates up to 48kHz - additional analogue input with RCA and 3,5mm jack connectors with loop through - automatic input selection with USB priorisation |
| Graham Slee Voyager Portable Headphone Amplifier | |
|
The Voyager is purely analogue. It has no digital clocks to veil the sound. By keeping the DAC where it belongs - in the source equipment - it can bring out the magic in the music, whatever format it comes from. |
| Pro-Ject Head Box MK II | |
|
Its heavy, metal case shields the electronics from other electrical noise, high-grade, gold-plated phono sockets and an over-sized transformer are supplied, ensuring the Headbox's superior sound-quality isn't lessoned. Specifications Power output 330mW/30ohms, 60mW/300ohms |
| Ergo Amp 1 Headphone Amplifier | |
|
Headphone amplifier ERGO AMP 1 The ERGO AMP 1 was developed for all dynamic headphones with a standard 6,3 mm plug. The power output of 3 W ensures a clean, uncoloured distortion free music re-production. In/out Cinch sockets are provided. The amplifier can be attached to CD, pre or integrated amplifiers, as long as these have a CINCH output. In particular |
| Lehmann Audio Black Cube Linear | |
|
|
Dynamic headphones vary far more than people realise. For the same sound pressure level the power needed with different headphone models can vary upto a factor of about 500! Impedances can be different to a factor of more than 20! This is the reason why different headphone models have very individual requirements of the amplifier driving them in terms of voltage and current. |
| Naim Headline 2 Headphone Amplifier | |
|
Due to overwhelming demand, the Headline can now be ordered with a pair of RCA plugs in place of the 5 pin DIN. This is especially welcome to Nait 5i owners and owners of non-Naim preamps. Same price applies for both DIN and RCA types. Fitted with a captive lead, the Headline takes its signal from the tape socket of any of our pre-amplifiers. It has its own volume control and is designed to be very, very quiet. It has the ability to drive most headphones to an adequate level (loud!) with low distortion. |
| Pro-Ject Head Box SE | |
|
Features • Connections for two headphone sets with individual volume adjustment • Permits connection of two further line-level sources to your amplifier • Oversized outboard power supply included Specifications Power output 150mW/600ohms Headphone connection>32 ohms Output impedance 20ohms Signal to noise 87dB ref. full output Frequency response 20Hz – 20kHz/0,2dB (10Hz – 120kHz/-1dB) |
| Graham Slee Solo SRG II Headphone Amplifier | |
|
|
| Page 1 / 2 | [ 1 | 2 | NEXT ] |
© 2010 STONEAUDIO UK LIMITED - site map
|