|
Page 25
( Displaying 10 of 359 Products )
|
|
|
Parasound Rack Mounts for Halo Series
|
|
Halo models are as functional as they are beautiful. Their appearance is not diminished in the least by mounting them in a standard equipment rack. Halo rack mount kits are not simply “rack ears” that extend the front panels. They are fabricated of heavy gauge steel and provide full support of the chassis. They are also color coordinated with the Halo products to blend perfectly.
HRA2 Rack Adaptor kits are for our models with 2 rack space front panels: P 7, P 5, A 23 , CD 1 and JC 3+
|
|
Parasound Rack Mounts for Classic Range
|
|
Each NewClassic model is designed for easy, secure rack mounting in a standard EIA equipment rack. Each model's front panel height conforms to the EIA standard size for rack mounting and removing the four feet from the bottom side takes less than a minute and requires only a phillips-head screwdriver.
NewClassic rack mount kits include heavy gauge steel mounting brackets that bolt to the sides of each unit's chassis.
|
|
SpeakerCraft VST60fc Volume Control
|
|
Transformed-Based Stereo Volume Control
Fast Connect Terminal Can Be Wired Ahead of Time and Simply Secured to the Volume Control
at the Time of Final Installation
Knob is Guaranteed to Never Come off Due to New Easy-To-Assemble Design
New 12-Step "Make Before Break" Switch Design
Power Rating: 60 Watts
Steps: 12 (Make Before Break)
Frequency Response: 20Hz - 20kHz
Total Attenuation: 42dB maximum
|
|
SpeakerCraft VCR60 Volume Control
|
|
Resistive, Stereo Volume Control
New 12-Step "Make Before Break" Switch Design
Knob Is Guaranteed to Never Come Off Due to New Easy to Assemble Design
New Screw Down Connector for Secure Wire Connections
Power Rating: 60 Watts
Steps: 12 (Make Before Break)
Frequency Response: 20Hz - 20kHz
Total Attenuation: 42dB Maximum
Depth: 2½" Behind Plate
Mounting: Fits Nearly All Standard Single-Gang Junction Boxes and Plaster Rings
|
|
SpeakerCraft IRC-2P2.1
|
|
2-Piece Plasma Blocking Surface Mount Mini IR Receiver
• Connects Via Four Stripped Conductor Wires
• Exclusive Plasma Blocking "Smart" Circuit for Severe Plasma or
• Multiple CFL Environments
• Pick-Up Module Allows Mounting on Flat Surfaces In Very Tiny Spaces
• IR Activity and System Status LEDs
• Frequency Range: 36 - 60 kHz (38 - 56 output)
• Requires Regulated Power Supply, Terminator Block, and Emitters
|
|
SpeakerCraft IRC-2P2.0
|
|
• Unique Quad 3.5mm Mini-Phone Type Connector
• Exclusive Plasma Blocking "Smart" Circuit for Severe Plasma or
• Multiple CFL Environments
• Pick-Up Module Allows Mounting on Flat Surfaces In Very Tiny Spaces
• IR Activity and System Status LEDs
• Frequency Range: 36 - 60 kHz (38 - 56 output)
• US Patent # 7,266,301
• Requires Regulated Power Supply, Terminator Block, and Emitters
|
|
Launch Port AM.2 Sleeve with buttons
|
|
iPad has become the favourite device for automation control, and for good reason: iPad Apps have the ability to provide a feature-rich, customized and intuitive interface for the user. But even an iPad app can sometimes be cumbersome to operate an automation system because of the need to “wake it up”, navigate to the control App and find the control.
Hard buttons, on the other hand, provide immediate access to key controls. But hard buttons exist on a wall, and in most cases are not right next to the user. We thought, if we could give iPad buttons that functioned independent of iPad itself, we would deliver the best of both worlds: immediate and continuous access to key controls and the richness of Apps; and app you want, at any time.
|
|
|
|
|
|
|
|
|
|
|
£ 289.00
* |
|
|
| * Only available for purchase in-store |
|
Launch Port AP.5 Power Sleeve
|
|
The LaunchPort AP.5 Sleeve is a brand new industrial design and supports iPad Air. LaunchPort has taken every opportunity to create the thinnest, lightest and most protective Sleeve they've ever made. Works with any LaunchPort Station or Travel Stand. Requires a LaunchPort Station to create a complete charging and mounting system.
•Made for iPad Air generation
•Embedded Magnets for secure mounting with any wall using WallStation or tabletop using BaseStation (sold separately).
|
|
|
|
|
|
|
|
|
|
|
£ 202.00
* |
|
|
|
|
|
£ 202.00
* |
|
|
| * Only available for purchase in-store |
|
Launch Port AM.2 Power Sleeve
|
|
The LaunchPort Power Sleeve White for iPad 3 is a sleeve-style, soft touch white case. It securely holds the iPad 3 and is used to mount to either the BaseStation and/or WallStation. It has a built-in wave guide for the iPad 3 speaker that allows the sound to be directed back at you for a better media experience. Because the Power Sleeve contains magnets, you can also mount it to any metallic surface. The AP.3 is also compatible with the iPad 2.
|
|
DVDO AVLabTPG
|
|
DVDO AVLab Test Pattern Generator (TPG) is the first pocket-sized test pattern generator
supporting full 4K Ultra HD at 50/60Hz as specified in Version 2.0 of the HDMI Standard.
Designed specifically for use with Color Management System (CMS) software such as CalMAN,
the AVLab TPG is powered by USB and uses the USB interface to automatically control the video
calibration workflow. Pocket-sized and rugged, AVLab TPG is designed to bring lab-quality
functionality to on-site display setup and calibration.
|
|
Page 25
( Displaying 10 of 359 Products )
|
|
Search for products that may contain the words:
within
using