For over fifty years record players have been designed and built at Pro-Ject's manufacturing facility in Litovel, situated to the east of Prague. Pro-Ject Audio Systems is currently one of the world's leading suppliers of record players, with a range of models designed to satisfy all levels of expectation and budget. Pro-Ject products exhibit sonic performance beyond all expectations normally associated with their price. they are simple to use, maintanance free and will function reliably for a lifetime.
|
Page 3
( Displaying 10 of 174 Products )
|
|
|
Pro-Ject Pre Box S2 Digital
|
|
Pre Box S2 Digital
S2-Line
The Pre Box S2 Digital is an ultra-modern DAC, pre-amplifier and headphone amplifier, engineered inside a compact, beautifully made chassis; representing luxury high-end audio performance at an astonishing price. Entering the market as the first product of the S2 Line from Box Design by Pro-Ject Audio Systems, the Pre Box S2 Digital is designed to accomodate even the most demanding digital audio enthusiasts.
|
|
Pro-Ject Primary Phono USB
|
|
Primary Phono USB
If you thought that setting up a hi-fi quality turntable was complicated, the Pro-Ject Primary USB sets out to disprove that theory. It does this by effectively combining the strong points of two other award-winning turntables from the Pro-Ject range; the Elemental Phono USB and the Essential II.
Like the Elemental Phono USB, the Primary Phono USB uses an 8.6” aluminium tonearm with sapphire bearings for optimal tracking. The tonearm is pre-configured for the supplied Ortofon OM 5E pick-up cartridge, so there’s no need to set-up the tracking force or anti-skate during installation. The motor is also the same perimeter belt-drive type, with a low-vibration synchronous motor that’s controlled by a built-in regulator for improved speed stability.
|
|
Pro-Ject Essential III
|
|
Essential III
The Essential III boasts a series of notable improvements that elevate it well beyond the ability of its predecessor, both technically and cosmetically.
The Essential III retains the simple yet elegant frame of the Essential II. Made from high-quality MDF for its acoustically neutral character, and now wrapped in a high-gloss paint finish (available in red, white or black); the main structure combines both elegance and functionality. The plinth is then mounted on three anti-vibration feet, for effective decoupling from the surface on which the turntable is placed.
|
|
Pro-Ject The Classic Turntable
|
|
To celebrate their 25 year anniversary, Pro-Ject Audio are combining traditional design with modern technology in a brand new turntable model. The aptly named 'Classic' is a sleek, compact and elegant turntable based around the "frame" design popularised by the likes of Thorens and Linn in the 1950's and 60's, but implemented with the innovative technologies Pro-Ject have become known for.
The two-plinth
|
|
Pro-Ject VT-E BT (VTEBT) Turntable
|
|
A turntable set-up does not need to be complicated like rocket-science, our VT-E BT turntable proves that. This good sounding belt-driven deck offers 2 versions for left– and right-handed users. The fastest possible installation process is made possible, because it comes pre-adjusted out of the box. No further set-up is needed. Tracking force and anti-skating are carefully set. The VT-E BT turntable can be positioned on a table or mounted on a wall. For further ease of use, it comes with a phono pre-amplifier and Bluetooth transmitter. So even a wireless solution is possible! You can use both Bluetooth and RCA output at the same time. VT-E BT, the world’s first wireless turntable, is available in black, red or white high gloss colour.
|
|
Pro-Ject Connect-IT Phono RCA-SI
|
|
The Pro-Ject cable range has been optimised for use with turntables. As a result, the 'SI' range - an electrically shielded cable made with pure silver - are highly flexible with low capacitance and a perfect shield.
All Pro-Ject cables have been developed to have low colouration and are handmade in Europe. State-of-the-Art components for leads, dielectric and plugs were chosen only after intense listening tests ruled them the best. Specific lengths were chosen because of their significant advantages when carrying audio signals.
|
|
Pro-Ject Connect-IT Phono RCA-CC
|
|
The Pro-Ject cable range has been optimised for use with turntables. As a result, the 'CC' range - an electrically shielded cable made with pure Oxygen Free Copper (OFC) conductors with an additional layer of carbon fibre - are highly flexible with low capacitance and a perfect shield.
All Pro-Ject cables have been developed to have low colouration and are handmade in Europe. State-of-the-Art components for leads, dielectric and plugs were chosen only after intense listening tests ruled them the best. Specific lengths were chosen because of their significant advantages when carrying audio signals.
|
|
Pro-Ject Absorb-IT (set of 4)
|
|
Absorb-IT
All audio components can be sensitive to mechanical vibrations which can hinder performance. Pro-Ject’s Absorb-IT feet are the perfect solution to remove any unwanted vibration and aid in delivering optimal sound. Designed to work with turntables, CD players and tube amplifiers as well as other components that maybe sensitive to vibrations or positioned on glass, metal or thin wood platforms.
|
|
Pro-Ject Signature Tonearms
|
|
This is a flagship tonearm, found only on the top-of-the-range Signature 10 and Signature 12 Turntables.
Key Features:
•Single pivot design with minimised bearing friction
•Non magnetic low resonance construction
•Fits low to high cartridge mass, including 32gr. SPU
•High rigidity aluminium headshell (12gr) with built-in fingerlift included, allows 1/2 inch cartridge mount
•High conductivity OFC headshell cables included
|
|
Pro-Ject 2 Xperience SB S-Shape Turntable
|
|
The 2Xperience SB S-Shape takes all the same innovations and improvements of the 2 Xperience SB design, but utilises a brand new S-Shape tonearm to give vinyl enthusiasts a more versatile high-end record player.
The S-Shape tonearm is made of a special alloy of aluminium with very high internal damping properties, for reduced resonance. The attractive bearing design allows for pin-point mounting of the premium vertical race bearings, while the horizontal ball bearings are rigidly mounted yet easily adjustable. The rotational anti-skate mechanism is inspired by the anti-skate system used on the flagship Signature 12 tonearm.
|
|
Page 3
( Displaying 10 of 174 Products )
|
|
Search for products that may contain the words:
within
using