|
Page 3
( Displaying 10 of 643 Products )
|
|
|
Ringmat Statfeet
|
|
RINGMAT STATFEET
Overview:-
Statfeet are 89mm squares of conductive polypropylene film, coated with specially formulated inks to form powerful, yet passive, electrical devices. Their unique design, using Ringmat Developments’ proprietary STATMAT® technology, breaks up the interference from electromagnetic fields that would otherwise build up around components from their surroundings.
Statfeet are used under Ringmat Feet, the feet of components, or under Ringmat Domes, cones or other forms of single point isolation support where they are used in place of a component’s own feet or where a component has no feet of its own. Such components may be loudspeakers,
|
|
Ringmat Spike Stoppers
|
|
RINGMAT SPIKE STOPPERS
Protect your floor and enhance the sound at the same time.
Use Ringmat Spike Stoppers under loudspeakers, systems tables and any other spiked supports under hi-fi and audio-visual equipment.
Ringmat Spike Stoppers can be used on their own and in terms of sound quality will outperform other spike protection support products. There will be a massive improvement in performance if used on wooden and other smooth, flat floors in conjunction with a Statfoot. Nevertheless, for best results, Spike Stoppers should be used on top of Ringmat Feet. Each set of Ringmat Feet already includes a Statfoot.
|
|
Ringmat Books
|
|
HOW TO SETUP & FINE TUNE A TURNTABLE
This booklet, first published in 1998, is now in its 2nd Edition. It should be read before attempting to set up (or recheck the set up of) a turntable. Its step-by-step approach, used in conjunction with manufacturers’ instructions, should enable most people to obtain the best sound possible from the alignment of a turntable system. If the reader has any difficulties with sight or dexterity of fingers, perhaps a local hi-fi dealer or a friend would help with some of the tasks.
|
|
Ringmat 2mm Rega Tonearm Spacers
|
|
2MM REGA SPACERS
Where a turntable has a Rega tonearm, there is no manual adjustment to the height of the tonearm at the pivot end. In some cases, this may preclude the setting of an accurate stylus rake angle for the cartridge. We can supply 2mm Tonearm Spacers in order to increase the height of the tonearm at the pivot end of the arm. They are placed between the underside of the tonearm pivot and the top of the plinth or tonearm board of the turntable.
|
|
Ringmat Platter Inserts
|
|
RINGMAT PLATTER INSERTS
In the case of those turntables having a split platter, such as certain of those from Linn, Roksan, AR, Thorens, etc., the inner platter or hub is usually slightly lower than the outer platter, often by 0.15mm or 0.3mm. So long as the inner underside ring of the Ringmat (Anniversary or XLR) still rests securely on the surface of the inner platter, even though it is very slightly lower than the outer platter, this should give an excellent result. However, should the difference between the inner and outer platters exceed 0.5mm, it will be best to build up the inner platter so that its surface is not more than, say, 0.3mm lower than the surface of the outer platter.
|
|
Ringmat CD Statmats
|
|
CD STATMAT
Sound specialist Ringmat Developments is proud to announce what it claims to be the biggest advance in CD reproduction since compact discs were introduced in 1983. The STATMAT electrostatic control system is designed to enhance the reproduction quality of CD recorded music. STATMAT eliminates the problem of low-level voltage surges, by evening out the electrostatic charges which build up during play. This results in greater resolution and separation, a wider, deeper soundstage, enhanced power and dynamics and an overall cleaner, crisper sound.
|
|
Ringmat Base Platter Mat & Ringmat Spacers
|
|
RINGMAT BASE PLATTER MAT & RINGMAT SPACERS
RINGMAT SPACERS
Although originally conceived as a means by which the record’s cutting angle can be replicated on playback, the design of the Ringmat Spacers has evolved to provide massive improvements in analogue sound reproduction in their own right. This is because the Base Platter Mat and the other Spacers provide a much better interface between the low-mass Ringmat (whichever model) and the relatively high-mass platter.
|
|
Ringmat Ringcap MK II
|
|
RINGMAT RINGCAP
This unique but simple device absorbs any vibrations which remain in the record while it is being played. It rests on top of the LP during play, occupying an area smaller than the record label. Very light in weight, it comprises a single ring underneath an absorbent, low resonance disc.
Ringcap is now in a MkII version using the new acrylic adhesives adopted for the Anniversary Ringmat.
|
|
Ringmat Domes
|
|
RINGMAT DOMES
RINGMAT DOMES
Use RINGMAT DOMES under loudspeakers,turntables, CD players (also DVD, SACD,and all transports, DACs, etc.),amplifiers, tuners, video machines, all other items of hi-fi or A/V equipment and all supporting platforms, shelves etc.
RINGMAT DOMES can be used on their own and will generally outperform most other isolation point support products. They perform even better in conjunction with STATFEET. Nevertheless, for best results directly under speakers and equipment,they should be used with RINGMAT FEET(which include a STATFOOT with every set).
|
|
Podspeakers Wall Mount for Minipod
|
|
WALL MOUNT FOR MINIPOD
This sturdy and smart Wall Mount for MiniPod is designed to complement the aesthetics of MiniPod loudspeakers while functioning as a fully adjustable mount for suspending the loudspeakers on walls and ceilings. Featuring a solid aluminum spine, this Wall Mount is perfect for your home, public venues and home cinema.
This product fits:-
MiniPod MK4
MiniPod BT MK2M
This Wallmount
|
|
Page 3
( Displaying 10 of 643 Products )
|
|
Search for products that may contain the words:
within
using